Project

General

Profile

Bug #2707 » dmesg.txt

jorisgio, 08/09/2014 07:40 AM

 
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v3.9.0.421.gf6f69-DEVELOPMENT #4: Sat Aug 9 13:09:24 CEST 2014
root@dfly:/usr/obj/usr/src/sys/MYCONF
TSC clock: 1861957489 Hz, i8254 clock: 1193155 Hz
CPU: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (1862.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Thermal and PM Features=0x3<SENSOR,TURBO>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 4183833600 (3990 MB)
avail memory = 2997903360 (2859 MB)
lapic: divisor index 0, frequency 133000566 Hz
Initialize MI interrupts
VMM: VMENTRY_LOAD_IA32_EFER not supported by this CPU
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F72A0 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BD95B771 00009C (v01 LENOVO TP-6D 00003080 LTP 00000000)
ACPI: FACP 0x00000000BD95B900 0000F4 (v03 LENOVO TP-6D 00003080 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20140724/tbfadt-648)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140724/tbfadt-730)
ACPI: DSDT 0x00000000BD95BCF4 00DEE4 (v01 LENOVO TP-6D 00003080 MSFT 03000000)
ACPI: FACS 0x00000000BD98E000 000040
ACPI: SSDT 0x00000000BD95BAB4 000240 (v01 LENOVO TP-6D 00003080 MSFT 03000000)
ACPI: ECDT 0x00000000BD969BD8 000052 (v01 LENOVO TP-6D 00003080 LNVO 00000001)
ACPI: APIC 0x00000000BD969C2A 000078 (v01 LENOVO TP-6D 00003080 LNVO 00000001)
ACPI: MCFG 0x00000000BD969CA2 00003C (v01 LENOVO TP-6D 00003080 LNVO 00000001)
ACPI: HPET 0x00000000BD969CDE 000038 (v01 LENOVO TP-6D 00003080 LNVO 00000001)
ACPI: SLIC 0x00000000BD969DC2 000176 (v01 LENOVO TP-6D 00003080 LTP 00000000)
ACPI: BOOT 0x00000000BD969F38 000028 (v01 LENOVO TP-6D 00003080 LTP 00000001)
ACPI: ASF! 0x00000000BD969F60 0000A0 (v16 LENOVO TP-6D 00003080 PTL 00000001)
ACPI: SSDT 0x00000000BD98D1EA 000578 (v01 LENOVO TP-6D 00003080 INTL 20050513)
ACPI: TCPA 0x00000000BD707000 000032 (v00 00000000 00000000)
ACPI: DMAR 0x00000000BD706000 000120 (v01 ? 00000001 00000000)
ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-6D> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x66,0x62 on acpi0
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd0000000-0xdfffffff,0xf2000000-0xf23fffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0
pci0: <simple comms> (vendor 0x8086, dev 0x2a44) at device 3.0 irq 16
pci0: <simple comms, UART> (vendor 0x8086, dev 0x2a47) at device 3.3 irq 17
em0: <Intel(R) PRO/1000 Network Connection ICH9_IGP_M_AMT 7.3.8> port 0x1840-0x185f mem 0xf2925000-0xf2925fff,0xf2700000-0xf271ffff irq 20 at device 25.0 on pci0
em0: MAC address: 00:1f:16:2b:d8:8b
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2926c00-0xf2926fff irq 23 at device 26.7 on pci0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: EHCI version 1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x293e) at device 27.0 irq 17
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf2500000-0xf2501fff irq 17 at device 0.0 on pci3
usbus3: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pci4: <memory> (vendor 0x8086, dev 0x444e) at device 0.0 irq 18
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0028)
pci5: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: 2 ports with 2 removable, self powered
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub2: 2 ports with 2 removable, self powered
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2927000-0xf29273ff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <MPTABLE PCI-PCI bridge> at device 30.0 on pci0
pci13: <PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0x1c20-0x1c3f,0x1838-0x183b,0x1c40-0x1c47,0x183c-0x183f,0x1c48-0x1c4f mem 0xf2926000-0xf29267ff irq 16 at device 31.2 on pci0
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.2 cap 0xef20ffa3<S64A,NCQ,SSNTF,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS,SXS>, 4 ports, 32 tags/port, gen 2 (3Gbps)
ahci0.0: Caps 4<POD>
ahci0.1: Caps 240004<ESP,HPCP,POD>
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen1.2: <vendor 0x08ff> at usbus1
ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
ugen7.2: <RICOH> at usbus7
umass0: <RICOH USB2.0-FLASH Media, class 0/0, rev 2.00/0.01, addr 2> on usbus7
ugen1.3: <Lenovo Computer Corp> at usbus1
ahci0.0: Found DISK "ST320LT007-9ZV142 0004LVM1" serial="W0Q793QW"
ahci0.0: tags=32/32 satacap=0f06 satacap2=0004 satafea=0048 NCQ=YES capacity=305245.33MB
ahci0.0: f85=3469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.1: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2930) at device 31.3 irq 23
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE02D9CC380 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0793A6400 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE07F3B9D20 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE00F8A9050 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
ACPI: Enabled 3 GPEs in block 00 to 3F
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
CAM: Configuring 3 busses
CAM: finished configuring all busses
disk scheduler: set policy of da8 to noop
disk scheduler: set policy of da0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA ST320LT007-9ZV14 0004> Fixed Direct Access SCSI-4 device
da0: Serial Number W0Q793QW
da0: 300.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <RICOH R5U880FlashMedia 0000> Removable Direct Access SCSI-2 device
da8: 40.000MB/s transfers
da8: 3781MB (7744512 512 byte sectors: 255H 63S/T 482C)
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/W0Q793QW.s2d
HAMMER(ROOT) recovery check seqno=0074546c
HAMMER(ROOT) recovery range 3000000016a9a4d0-3000000016a9a4d0
HAMMER(ROOT) recovery nexto 3000000016a9a4d0 endseqno=0074546d
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 19848k, remaining available: 16384k
Mounting devfs
info: [drm] Initialized drm 1.1.0 20060810
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] AGP at 0xd0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
can't re-use a leaf (%desc)!
can't re-use a leaf (%driver)!
can't re-use a leaf (%location)!
can't re-use a leaf (%pnpinfo)!
can't re-use a leaf (%parent)!
drm0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] Initialized i915 1.6.0 20080730
wlan0: MAC address: 00:21:6a:64:c2:4e
(3-3/3)