DragonFlyBSD

DragonFly boot

0:ad(0,a): boot -v /boot/kernelWARNING: loader(8) metadata is missing!

SMAP type=01 base=00000000 00000000 len=00000000 0009ec00

SMAP type=02 base=00000000 0009ec00 len=00000000 00001400

SMAP type=02 base=00000000 000a0000 len=00000000 00060000

SMAP type=01 base=00000000 00100000 len=00000000 3fbf0000

SMAP type=04 base=00000000 3fcf0000 len=00000000 000a6000

SMAP type=01 base=00000000 3fd96000 len=00000000 00079000

SMAP type=02 base=00000000 3fe0f000 len=00000000 00050000

SMAP type=01 base=00000000 3fe5f000 len=00000000 00009000

SMAP type=04 base=00000000 3fe68000 len=00000000 00077000

SMAP type=01 base=00000000 3fedf000 len=00000000 0000b000

SMAP type=03 base=00000000 3feea000 len=00000000 00015000

SMAP type=01 base=00000000 3feff000 len=00000000 00001000

SMAP type=02 base=00000000 3ff00000 len=00000000 00100000

SMAP type=02 base=00000000 f0000000 len=00000000 04000000

SMAP type=02 base=00000000 fff80000 len=00000000 0000c000

Copyright (c) 2003-2009 The DragonFly Project.

Copyright (c) 1992-2003 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

DragonFly 2.3.0-DEVELOPMENT #0: Fri Feb  6 05:19:34 MSK 2009

    russiane39@border.gpinternet.ru:/usr/obj/usr/src/sys/V12

Calibrating clock(s) ... TSC clock: 2393987913 Hz, i8254 clock: 1193176 Hz

CLK_USE_I8254_CALIBRATION not specified - using default frequency

CLK_USE_TSC_CALIBRATION not specified - using old calibration method

CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2394.01-MHz 686-class CPU)

  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11

  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>

  Hyperthreading: 4 logical CPUs

real memory  = 1071706112 (1046588K bytes)

Physical memory chunk(s):

0x00001000 - 0x0009dfff, 643072 bytes (157 pages)

0x0048f000 - 0x3fceffff, 1065750528 bytes (260193 pages)

0x3fd96000 - 0x3fdfefff, 430080 bytes (105 pages)

avail memory = 1030586368 (1006432K bytes)

Changing APIC ID for IO APIC #0 from 0 to 5 on chip

Programming 24 pins in IOAPIC #0

IOAPIC #0 intpin 1 -> irq 1

IOAPIC #0 intpin 2 -> irq 2

IOAPIC #0 intpin 3 -> irq 3

IOAPIC #0 intpin 4 -> irq 4

IOAPIC #0 intpin 5 -> irq 5

IOAPIC #0 intpin 6 -> irq 6

IOAPIC #0 intpin 7 -> irq 7

IOAPIC #0 intpin 8 -> irq 8

IOAPIC #0 intpin 12 -> irq 12

IOAPIC #0 intpin 13 -> irq 13

IOAPIC #0 intpin 14 -> irq 14

IOAPIC #0 intpin 15 -> irq 15

Programming 24 pins in IOAPIC #1

SMP: CPU0 apic_initialize():

     lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

DragonFly/MP: Multiprocessor motherboard

 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000

 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000

 cpu2 (AP):  apic id:  2, version: 0x00050014, at 0xfee00000

 cpu3 (AP):  apic id:  3, version: 0x00050014, at 0xfee00000

 io0 (APIC): apic id:  5, version: 0x00170020, at 0xfec00000

 io1 (APIC): apic id:  6, version: 0x00178020, at 0xfec10000

APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0

Finish MP startup

SMP: AP CPU #3 Launched!

SMP: CPU3 apic_initialize():

     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

SMP: AP CPU #1 Launched!

SMP: CPU1 apic_initialize():

     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

SMP: AP CPU #2 Launched!

SMP: CPU2 apic_initialize():

     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

Active CPU Mask: 0000000f

pnpbios: Found PnP BIOS data at 0xc00f0a30

pnpbios: Entry = f0000:c4dc  Rev = 1.0

Other BIOS signatures found:

objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->64

start dummy scheduler helpers on cpus: 0 1 2 3

start scheduler helpers on cpus: 0 1 2 3

crypto: <crypto core>

Pentium Pro MTRR support enabled

md0: Malloc disk

Math emulator present

pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000

pci_open(1a):   mode1res=0x80000000 (0x80000000)

pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=29f08086)

pcibios: No call entry point

pcibios: No call entry point

npx0.nexus0.root0

npx0: <math processor> [tentative] on motherboard

npx0: INT 16 interface

Using XMM optimized bcopy/copyin/copyout

npx0: <math processor> [attached!] on motherboard

legacypci0.nexus0.root0

legacypci0 [tentative] on motherboard

pcib0.legacypci0.nexus0.root0

pcib0: <Host to PCI bridge> [tentative] on legacypci0

pci0.pcib0.legacypci0.nexus0.root0

pci0: <PCI bus> [tentative] on pcib0

pci0: pci_attach() physical bus=0

found-> vendor=0x8086, dev=0x29f0, revid=0x00

        bus=0, slot=0, func=0

        class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

IOAPIC #0 intpin 20 -> irq 9

Freeing (NOT implemented) redirected PCI irq 11.

Freeing (NOT implemented) redirected PCI irq 11.

        map[10]: type 1, range 32, base 41a00000, size 17

        map[14]: type 1, range 32, base 41a20000, size 12

        map[18]: type 1, range 32, base 00002040, size  5

found-> vendor=0x8086, dev=0x10bd, revid=0x02

        bus=0, slot=25, func=0

        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

        intpin=a, irq=9

found-> vendor=0x8086, dev=0x2940, revid=0x02

        bus=0, slot=28, func=0

        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1

        subordinatebus=2        secondarybus=1

        intpin=a, irq=11

        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00080ce0[HOTPLUG]

found-> vendor=0x8086, dev=0x2948, revid=0x02

        bus=0, slot=28, func=4

        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1

        subordinatebus=3        secondarybus=3

        intpin=a, irq=11

        PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00280560[HOTPLUG]

found-> vendor=0x8086, dev=0x244e, revid=0x92

        bus=0, slot=30, func=0

        class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0

        subordinatebus=4        secondarybus=4

found-> vendor=0x8086, dev=0x2916, revid=0x02

        bus=0, slot=31, func=0

        class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1

        subordinatebus=0        secondarybus=0

IOAPIC #0 intpin 21 -> irq 10

        map[10]: type 3, range 32, base 00002068, size  3

        map[14]: type 1, range 32, base 00002074, size  2

        map[18]: type 1, range 32, base 00002060, size  3

        map[1c]: type 1, range 32, base 00002070, size  2

        map[20]: type 1, range 32, base 00002020, size  5

        map[24]: type 1, range 32, base 41a21000, size 11

found-> vendor=0x8086, dev=0x2922, revid=0x02

        bus=0, slot=31, func=2

        class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

        intpin=a, irq=10

IOAPIC #0 intpin 18 -> irq 11

Freeing (NOT implemented) redirected PCI irq 9.

Freeing (NOT implemented) redirected PCI irq 9.

        map[10]: type 1, range 64, base 41a21800, size  8

        map[20]: type 1, range 32, base 00002000, size  5

found-> vendor=0x8086, dev=0x2930, revid=0x02

        bus=0, slot=31, func=3

        class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

        intpin=b, irq=11

em0.pci0.pcib0.legacypci0.nexus0.root0

em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [tentative] port 0x2040-0x205f mem 0x41a20000-0x41a20fff,0x41a00000-0x41a1ffff irq 9 at device 25.0 on pci0

em0: bpf attached

em0: MAC address: 00:15:17:26:c1:32

em0: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [attached!] port 0x2040-0x205f mem 0x41a20000-0x41a20fff,0x41a00000-0x41a1ffff irq 9 at device 25.0 on pci0

pcib1.pci0.pcib0.legacypci0.nexus0.root0

pcib1: <PCI to PCI bridge (vendor=8086 device=2940)> [tentative] irq 11 at device 28.0 on pci0

pcib1:   secondary bus     1

pcib1:   subordinate bus   2

pcib1:   I/O decode        0xf000-0xfff

pcib1:   memory decode     0xfff00000-0xfffff

pcib1:   prefetched decode 0xfff00000-0xfffff

pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0

pci1: <PCI bus> [tentative] on pcib1

pci1: pci_attach() physical bus=1

found-> vendor=0x8086, dev=0x032c, revid=0x09

        bus=1, slot=0, func=0

        class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1

        subordinatebus=2        secondarybus=2

        PCI Express ver.1 cap=0x0071[PCIE2PCI]

pcib2.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0

pcib2: <PCI to PCI bridge (vendor=8086 device=032c)> [tentative] at device 0.0 on pci1

pcib2:   secondary bus     2

pcib2:   subordinate bus   2

pcib2:   I/O decode        0xf000-0xfff

pcib2:   memory decode     0xfff00000-0xfffff

pcib2:   prefetched decode 0xfff00000-0xfffff

pci2.pcib2.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0

pci2: <PCI bus> [tentative] on pcib2

pci2: pci_attach() physical bus=2

pci2: <PCI bus> [attached!] on pcib2

pcib2: <PCI to PCI bridge (vendor=8086 device=032c)> [attached!] at device 0.0 on pci1

pci1: <PCI bus> [attached!] on pcib1

pcib1: <PCI to PCI bridge (vendor=8086 device=2940)> [attached!] irq 11 at device 28.0 on pci0

pcib3.pci0.pcib0.legacypci0.nexus0.root0

pcib3: <PCI to PCI bridge (vendor=8086 device=2948)> [tentative] irq 11 at device 28.4 on pci0

pcib3:   secondary bus     3

pcib3:   subordinate bus   3

pcib3:   I/O decode        0xf000-0xfff

pcib3:   memory decode     0x41000000-0x418fffff

pcib3:   prefetched decode 0x40000000-0x40ffffff

pci3.pcib3.pci0.pcib0.legacypci0.nexus0.root0

pci3: <PCI bus> [tentative] on pcib3

pci3: pci_attach() physical bus=3

IOAPIC #0 intpin 16 -> irq 16

Freeing (NOT implemented) redirected PCI irq 11.

Freeing (NOT implemented) redirected PCI irq 11.

        map[10]: type 1, range 32, base 40000000, size 24

        map[14]: type 1, range 32, base 41800000, size 14

        map[18]: type 1, range 32, base 41000000, size 23

found-> vendor=0x102b, dev=0x0522, revid=0x02

        bus=3, slot=0, func=0

        class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

        intpin=a, irq=16

        PCI Express ver.1 cap=0x0011[LEGDEV]

pci3: <Matrox model 0522 graphics accelerator> (vendor=0x102b, dev=0x0522) at 0.0 irq 16

pci3: <PCI bus> [attached!] on pcib3

pcib3: <PCI to PCI bridge (vendor=8086 device=2948)> [attached!] irq 11 at device 28.4 on pci0

pcib4.pci0.pcib0.legacypci0.nexus0.root0

pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [tentative] at device 30.0 on pci0

pcib4:   secondary bus     4

pcib4:   subordinate bus   4

pcib4:   I/O decode        0x1000-0x1fff

pcib4:   memory decode     0x41900000-0x419fffff

pcib4:   prefetched decode 0xfff00000-0xfffff

pcib4:   Subtractively decoded bridge.

pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0

pci4: <PCI bus> [tentative] on pcib4

pci4: pci_attach() physical bus=4

Freeing (NOT implemented) redirected PCI irq 9.

Freeing (NOT implemented) redirected PCI irq 9.

        map[10]: type 1, range 32, base 41920000, size 17

        map[14]: type 1, range 32, base 41900000, size 17

        map[18]: type 1, range 32, base 00001000, size  6

found-> vendor=0x8086, dev=0x1076, revid=0x05

        bus=4, slot=2, func=0

        class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0

        subordinatebus=0        secondarybus=0

        intpin=a, irq=11

em1.pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0

em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [tentative] port 0x1000-0x103f mem 0x41900000-0x4191ffff,0x41920000-0x4193ffff irq 11 at device 2.0 on pci4

pcib4: device em1 requested decoded memory range 0x41920000-0x4193ffff

pcib4: device em1 requested decoded I/O range 0x1000-0x103f

em1: bpf attached

em1: MAC address: 00:15:17:26:c1:30

em1: <Intel(R) PRO/1000 Network Connection, Version - 6.2.9> [attached!] port 0x1000-0x103f mem 0x41900000-0x4191ffff,0x41920000-0x4193ffff irq 11 at device 2.0 on pci4

pci4: <PCI bus> [attached!] on pcib4

pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [attached!] at device 30.0 on pci0

isab0.pci0.pcib0.legacypci0.nexus0.root0

isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [tentative] at device 31.0 on pci0

isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

isa0: <ISA bus> [tentative] on isab0

isa0: <ISA bus> [attached!] on isab0

isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [attached!] at device 31.0 on pci0

atapci0.pci0.pcib0.legacypci0.nexus0.root0

atapci0: <Intel (ID=29228086) AHCI controller> [tentative] port 0x2020-0x203f,0x2070-0x2073,0x2060-0x2067,0x2074-0x2077,0x2068-0x206f mem 0x41a21000-0x41a217ff irq 10 at device 31.2 on pci0

atapci0: AHCI Version 01.20 controller with 6 ports detected

ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata2: <ATA channel 0> [tentative] on atapci0

ata2: SATA connect time=0ms

ata2: ahci_reset devices=0x1<ATA_MASTER>

ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire

ad4: Intel check1 failed

ad4: Adaptec check1 failed

ad4: LSI (v3) check1 failed

ad4: LSI (v2) check1 failed

ad4: FreeBSD check1 failed

ad4: 76319MB <SAMSUNG HD082GJ JE100-19> at ata2-master SATA300

ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue

ata2: <ATA channel 0> [attached!] on atapci0

ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata3: <ATA channel 1> [tentative] on atapci0

ata3: SATA connect time=0ms

ata3: ahci_reset devices=0x1<ATA_MASTER>

ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire

ad6: Intel check1 failed

ad6: Adaptec check1 failed

ad6: LSI (v3) check1 failed

ad6: LSI (v2) check1 failed

ad6: FreeBSD check1 failed

ad6: 953869MB <SAMSUNG HD103UJ 1AA01113> at ata3-master SATA300

ad6: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue

ata3: <ATA channel 1> [attached!] on atapci0

ata4.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata4: <ATA channel 2> [tentative] on atapci0

ata4: SATA connect status=00000000

ata4: ahci_reset devices=0x0

ata4: <ATA channel 2> [attached!] on atapci0

ata5.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata5: <ATA channel 3> [tentative] on atapci0

ata5: SATA connect status=00000000

ata5: ahci_reset devices=0x0

ata5: <ATA channel 3> [attached!] on atapci0

ata6.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata6: <ATA channel 4> [tentative] on atapci0

ata6: SATA connect status=00000000

ata6: ahci_reset devices=0x0

ata6: <ATA channel 4> [attached!] on atapci0

ata7.atapci0.pci0.pcib0.legacypci0.nexus0.root0

ata7: <ATA channel 5> [tentative] on atapci0

ata7: SATA connect status=00000000

ata7: ahci_reset devices=0x0

ata7: <ATA channel 5> [attached!] on atapci0

atapci0: <Intel (ID=29228086) AHCI controller> [attached!] port 0x2020-0x203f,0x2070-0x2073,0x2060-0x2067,0x2074-0x2077,0x2068-0x206f mem 0x41a21000-0x41a217ff irq 10 at device 31.2 on pci0

pci0: <unknown card> (vendor=0x8086, dev=0x2930) at 31.3 irq 11

pci0: <PCI bus> [attached!] on pcib0

pcib0: <Host to PCI bridge> [attached!] on legacypci0

legacypci0 [attached!] on motherboard

Trying Read_Port at 203

Trying Read_Port at 243

Trying Read_Port at 283

Trying Read_Port at 2c3

Trying Read_Port at 303

Trying Read_Port at 343

Trying Read_Port at 383

Trying Read_Port at 3c3

isa_probe_children: disabling PnP devices

isa_probe_children: probing non-PnP devices

orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0

orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0

atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0

atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0

atkbd: the current kbd controller command byte 0065

atkbd: keyboard ID 0x41ab (2)

kbdc: RESET_KBD return code:00fa

kbdc: RESET_KBD status:00aa

kbd0 at atkbd0

kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000

atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0

psm0: current command byte:0065

kbdc: TEST_AUX_PORT status:0000

kbdc: RESET_AUX return code:00fe

kbdc: RESET_AUX return code:00fe

kbdc: RESET_AUX return code:00fe

kbdc: DIAGNOSE status:0055

kbdc: TEST_KBD_PORT status:0000

psm0: failed to reset the aux device.

atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0

vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

fb0: vga0, vga, type:VGA (5), flags:0x7007f

fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000

fb0: init mode:24, bios mode:3, current mode:24

fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k

VGA parameters upon power-up

50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 02 ef 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters in BIOS for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters to be used for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

sc0: <System console> [tentative] at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x100>

sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)

sc0: <System console> [attached!] at flags 0x100 on isa0

lm0 [tentative] failed to probe at port 0x290-0x297 on isa0

it0 [tentative] failed to probe at port 0x290-0x297 on isa0

it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0

it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0

sio0: irq maps: 0x400 0x410 0x400 0x400

sio0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0

sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

sio0: type 16550A, console

sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

sio1: can't drain, serial port might not exist, disabling

sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0

sio2: not probed (disabled)

sio3: not probed (disabled)

ppc0: parallel port not found.

ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0

ie0: not probed (disabled)

lnc0: not probed (disabled)

cs0: not probed (disabled)

sn0: not probed (disabled)

isa_probe_children: probing PnP devices

SMP: enabled INTs: 0, 1, 4, 9, 11, apic_imen: 0x00fff5ec

BIOS Geometries:

 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors

 0 accounted for

Device configuration finished.

crypto: assign driver 0, flags 2

crypto: driver 0 registers alg 1 flags 0 maxoplen 0

crypto: driver 0 registers alg 2 flags 0 maxoplen 0

crypto: driver 0 registers alg 3 flags 0 maxoplen 0

crypto: driver 0 registers alg 4 flags 0 maxoplen 0

crypto: driver 0 registers alg 5 flags 0 maxoplen 0

crypto: driver 0 registers alg 17 flags 0 maxoplen 0

crypto: driver 0 registers alg 6 flags 0 maxoplen 0

crypto: driver 0 registers alg 7 flags 0 maxoplen 0

crypto: driver 0 registers alg 15 flags 0 maxoplen 0

crypto: driver 0 registers alg 8 flags 0 maxoplen 0

crypto: driver 0 registers alg 16 flags 0 maxoplen 0

crypto: driver 0 registers alg 9 flags 0 maxoplen 0

crypto: driver 0 registers alg 10 flags 0 maxoplen 0

crypto: driver 0 registers alg 13 flags 0 maxoplen 0

crypto: driver 0 registers alg 14 flags 0 maxoplen 0

crypto: driver 0 registers alg 11 flags 0 maxoplen 0

crypto: driver 0 registers alg 18 flags 0 maxoplen 0

faith0: bpf attached

lo0: bpf attached

bootdev: a020001e type=30 unit=0 slice=2 part=0 major=-1

ATA PseudoRAID loaded

Manual root filesystem specification:

  <fstype>:<device>  Specify root (e.g. ufs:da0s1a)

  ?                  List valid disk boot devices

  panic              Just panic

  abort              Abort manual input

mountroot> ufs:ad4s1a

Mounting root from ufs:ad4s1a

ad4s1: type 0xa5, start 63, end = 156301487, size 156301425 : OK

start_init: trying /sbin/init

Loading configuration files.

.

kern.seedenable: 0 -> 1

kern.seedenable: 1 -> 0

dumpon: crash dumps to /dev/ad4s1b (116, 0x20021)

swapon: adding /dev/ad4s1b as swap device

Starting file system checks:

/dev/ad4s1a: FILESYSTEM CLEAN; SKIPPING CHECKS

/dev/ad4s1a: clean, 4033474 free (762 frags, 504089 blocks, 0.0% fragmentation)

/dev/ad4s1d: FILESYSTEM CLEAN; SKIPPING CHECKS

/dev/ad4s1d: clean, 8253911 free (159 frags, 1031719 blocks, 0.0% fragmentation)

/dev/ad4s1e: FILESYSTEM CLEAN; SKIPPING CHECKS

/dev/ad4s1e: clean, 8256818 free (106 frags, 1032089 blocks, 0.0% fragmentation)

/dev/ad4s1f: FILESYSTEM CLEAN; SKIPPING CHECKS

/dev/ad4s1f: clean, 4328306 free (30866 frags, 537180 blocks, 0.4% fragmentation)

/dev/ad4s1g: FILESYSTEM CLEAN; SKIPPING CHECKS

/dev/ad4s1g: clean, 7381845 free (1261 frags, 922573 blocks, 0.0% fragmentation)

Setting hostname: border.gpinternet.ru.

kern.sync_on_panic: 1 -> 0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384

        options=3<RXCSUM,TXCSUM>

        inet 127.0.0.1 netmask 0xff000000

        inet6 ::1 prefixlen 128

        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4

Debugger("manual escape to debugger")

CPU0 stopping CPUs: 0x0000000e

 stopped

Stopped at      Debugger+0x34:  movb    $0,db_active+0x4

db> trace

Debugger(c0395dd2) at Debugger+0x34

sc_attach_unit(0,0,0,c04577e0,ff800000) at sc_attach_unit+0xa73

sc_attach_unit(c04577e0,0,d2c58cc0) at sc_attach_unit+0xd5c

atkbd_attach_unit(c04577e0,0) at atkbd_attach_unit+0x612

pci_cfgintr(c04577e0,0) at pci_cfgintr+0x159d

ithread_fast_handler(1,0,0,0,0) at ithread_fast_handler+0x33c

lwkt_exit() at lwkt_exit

db> show map

Task map 0xc03374a0: pmap=0xf0458b00, nentries=-1223704572, version=1354778066

Fatal trap 12: page fault while in kernel mode

mp_lock = 00000000; cpuid = 0; lapic.id = 00000000

fault virtual address   = 0x8300c061

fault code              = supervisor read, page not present

instruction pointer     = 0x8:0xc02d669c

stack pointer           = 0x10:0xd2c04b0c

frame pointer           = 0x10:0xd2c04b18

code segment            = base 0x0, limit 0xfffff, type 0x1b

                        = DPL 0, pres 1, def32 1, gran 1

processor eflags        = resume, IOPL = 0

current process         = Idle

current thread          = pri 60 (CRIT)

 <- SMP: XXX

kernel: type 12 trap, code=0

Stopped at      Debugger+0x34:  movb    $0,db_active+0x4

db> show page

vmstats.v_free_count: 244075

vmstats.v_cache_count: 0

vmstats.v_inactive_count: 1189

vmstats.v_active_count: 276

vmstats.v_wire_count: 9779

vmstats.v_free_reserved: 446

vmstats.v_free_min: 1721

vmstats.v_free_target: 7330

vmstats.v_cache_min: 7330

vmstats.v_inactive_target: 10995

db> n

CPU0 restarting CPUs: 0x0000000e

 restarted

Fatal trap 10: trace trap while in kernel mode

mp_lock = 00000000; cpuid = 0; lapic.id = 00000000

instruction pointer     = 0x8:0xc03374a7

stack pointer           = 0x10:0xd2c04c94

frame pointer           = 0x10:0xd2c04c9c

code segment            = base 0x0, limit 0xfffff, type 0x1b

                        = DPL 0, pres 1, def32 1, gran 1

processor eflags        = trace trap, interrupt enabled, IOPL = 0

current process         = Idle

current thread          = pri 60 (CRIT)

 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e

 stopped

CPU0 restarting CPUs: 0x0000000e

 restarted

Fatal trap 10: trace trap while in kernel mode

mp_lock = 00000000; cpuid = 0; lapic.id = 00000000

instruction pointer     = 0x8:0xc03374aa

stack pointer           = 0x10:0xd2c04c9c

frame pointer           = 0x10:0xd2c04c9c

code segment            = base 0x0, limit 0xfffff, type 0x1b

                        = DPL 0, pres 1, def32 1, gran 1

processor eflags        = trace trap, interrupt enabled, IOPL = 0

current process         = Idle

current thread          = pri 60 (CRIT)

 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e

 stopped

CPU0 restarting CPUs: 0x0000000e

 restarted

Fatal trap 10: trace trap while in kernel mode

mp_lock = 00000000; cpuid = 0; lapic.id = 00000000

instruction pointer     = 0x8:0xc03374ab

stack pointer           = 0x10:0xd2c04ca0

frame pointer           = 0x10:0xd2c04cd8

code segment            = base 0x0, limit 0xfffff, type 0x1b

                        = DPL 0, pres 1, def32 1, gran 1

processor eflags        = trace trap, interrupt enabled, IOPL = 0

current process         = Idle

current thread          = pri 60 (CRIT)

 <- SMP: XXX

CPU0 stopping CPUs: 0x0000000e

 stopped

After 3 instructions (0 loads, 0 stores),

Stopped at      Debugger+0x3f:  ret

db> panic

panic: from debugger

mp_lock = 00000000; cpuid = 0

Trace beginning at frame 0xd2c04ad0

panic(d2c04af4,0,c0362f68,0,d2c04af4) at panic+0x14d

panic(c038361f,d2c04bb8,c014ff38,c03374a0,0) at panic+0x14d

db_set_breakpoints(c03374a0,0,ffffffff,d2c04b2c) at db_set_breakpoints+0x6a

db_command_loop(0,d2c04bdc,c03376aa,3,0) at db_command_loop+0x438

db_trap(3,0,1,1,d2c04c0c) at db_trap+0xa0

kdb_trap(3,0,d2c04c4c) at kdb_trap+0x13e

user_ldt_free(3c,c03f70c4,0,0,f4240) at user_ldt_free+0x58f

trap(d2c04c4c) at trap+0x55

alltraps_with_regs_pushed(c0395dd2) at alltraps_with_regs_pushed+0x1d

sc_attach_unit(18,10,0,c04577e0,ff800000) at sc_attach_unit+0xa73

sc_attach_unit(c04577e0,0,d2c58cc0) at sc_attach_unit+0xd5c

atkbd_attach_unit(c04577e0,0) at atkbd_attach_unit+0x612

pci_cfgintr(c04577e0,0) at pci_cfgintr+0x159d

ithread_fast_handler(1,0,0,0,0) at ithread_fast_handler+0x33c

lwkt_exit() at lwkt_exit

boot() called on cpu#0

Uptime: 1s

dumping to dev #ad/0x20021, blockno 2101128