Copyright (c) 2003-2013 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v3.7.1.126.g0b576d-DEVELOPMENT #61: Wed Nov 27 18:36:18 MST 2013
    root@blueagave.timdarby.com:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 2812535874 Hz, i8254 clock: 1193225 Hz
CPU: AMD Phenom(tm) II X6 1055T Processor (2812.45-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100fa0  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
real memory  = 8049410048 (7676 MB)
avail memory = 7541837824 (7192 MB)
LAPIC: AMD LINTEN on
lapic: divisor index 0, frequency 100444311 Hz
Initialize MI interrupts
cpu0: AMD C1E detected
cpu2: AMD C1E detected
cpu5: AMD C1E detected
cpu1: AMD C1E detected
cpu4: AMD C1E detected
cpu3: AMD C1E detected
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Preloaded image <initrd.img> 15728640 bytes at 0xffffffff81f348b8
disk scheduler: set policy of md0 to noop
disk scheduler: set policy of md1 to noop
md1: Malloc disk
ACPI: RSDP 0xf5e80 00014 (v00 GBT   )
ACPI: RSDT 0xcfcf1000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0xcfcf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0xcfcf1100 076BC (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0xcfcf0000 00040
ACPI: SSDT 0xcfcf8880 00EDC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 0xcfcf9780 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0xcfcf97c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0xcfcf9800 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 0xcfcf9870 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 0xcfcf87c0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
cryptosoft0: <software crypto> on motherboard
acpi0: <GBT GBTUACPI> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xfdd00000-0xfddfffff,0xfdee0000-0xfdeeffff,0xd0000000-0xdfffffff irq 18 at device 5.0 on pci1
pci1: <multimedia, HDA> (vendor 0x1002, dev 0x970f) at device 5.1 irq 19
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <serial bus, USB> (vendor 0x1033, dev 0x0194) at device 0.0 irq 17
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdff8000-0xfdffbfff,0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci3
re0: Hardware rev. 0x28000000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: 6c:f0:49:ed:10:94
ahci0: <AHCI-PCI-SATA> port 0xfb00-0xfb0f,0xfc00-0xfc03,0xfd00-0xfd07,0xfe00-0xfe03,0xff00-0xff07 mem 0xfe02f000-0xfe02f3ff irq 19 at device 17.0 on pci0
ahci0: AHCI 1.2 cap 0xf732ff05<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 2006<MPSS,POD,SUD>
ahci0.1: Caps 2006<MPSS,POD,SUD>
ahci0.2: Caps 2006<MPSS,POD,SUD>
ahci0.3: Caps 2006<MPSS,POD,SUD>
ahci0.4: Caps 2006<MPSS,POD,SUD>
ahci0.5: Caps 2006<MPSS,POD,SUD>
ahci0.3: PMPROBE(2) No Port Multiplier was found.
ahci0.5: PMPROBE(2) No Port Multiplier was found.
ahci0.4: PMPROBE(2) No Port Multiplier was found.
ahci0.2: PMPROBE(2) No Port Multiplier was found.
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.5: PMPROBE(2) No Port Multiplier was found.
ahci0.3: PMPROBE(2) No Port Multiplier was found.
ahci0.4: PMPROBE(2) No Port Multiplier was found.
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.2: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.0: Found SSD "INTEL SSDSA2M040G2GC 2CV102HD" serial="CVGB038601QT040NGN"
ahci0.0: tags=32/32 satacap=0506 satacap2=0000 satafea=0048 NCQ=YES capacity=38166.67MB
ahci0.0: f85=7469 f86=bc01 f87=6163 WC=enabled RA=enabled SEC=freezing
ahci0.1: Found DISK "ST4000DM000-1F2168 CC52" serial="Z300J7Y1"
ahci0.1: tags=32/32 satacap=850e satacap2=0006 satafea=004c NCQ=YES capacity=3815447.83MB
ahci0.1: f85=3469 f86=bc49 f87=4163 WC=enabled RA=enabled SEC=freezing
ahci0.2: Found DISK "ST2000DL003-9VT166 CC3C" serial="5YD6X7CG"
ahci0.2: tags=32/32 satacap=850e satacap2=0006 satafea=0048 NCQ=YES capacity=1907729.08MB
ahci0.2: f85=3469 f86=be01 f87=4163 WC=enabled RA=enabled SEC=freezing
ahci0.3: Found DISK "ST4000DM000-1F2168 CC51" serial="Z3009Y5K"
ahci0.3: tags=32/32 satacap=850e satacap2=0006 satafea=004c NCQ=YES capacity=3815447.83MB
ahci0.3: f85=3469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=freezing
ahci0.4: Found DISK "ST4000DM000-1F2168 CC52" serial="Z300JPC7"
ahci0.4: tags=32/32 satacap=850e satacap2=0006 satafea=004c NCQ=YES capacity=3815447.83MB
ahci0.4: f85=3469 f86=bc49 f87=4163 WC=enabled RA=enabled SEC=freezing
ahci0.5: Found DISK "SAMSUNG HD204UI 1AQ10001" serial="S2H7JD1B219473"
ahci0.5: tags=32/32 satacap=1706 satacap2=0000 satafea=004c NCQ=YES capacity=1907729.08MB
ahci0.5: f85=7469 f86=bc41 f87=4123 WC=enabled RA=enabled SEC=freezing
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 18 at device 18.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 5 ports with 5 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02d000-0xfe02d0ff irq 17 at device 18.2 on pci0
usb1: EHCI version 1.0
usb1: companion controller, 5 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 5 ports with 5 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.0 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 5 ports with 5 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02b000-0xfe02b0ff irq 17 at device 19.2 on pci0
usb3: EHCI version 1.0
usb3: companion controller, 5 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 5 ports with 5 removable, self powered
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 16
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <simple comms, parallel port> (vendor 0x9710, dev 0x9865) at device 6.0 irq 20
pci4: <simple comms, parallel port> (vendor 0x9710, dev 0x9865) at device 6.2 irq 22
fwohci0: <Texas Instruments TSB43AB23> mem 0xfdcf4000-0xfdcf7fff,0xfdcfb000-0xfdcfb7ff irq 22 at device 14.0 on pci4
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:eb:a7:04:00:6c:f0:49
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:eb:a7:6c:f0:49
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
Unknown tcode 14
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ohci2: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 20.5 on pci0
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci2
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
atapci0: <JMicron JMB363 SATA300 controller> port 0xab00-0xab0f,0xac00-0xac03,0xad00-0xad07,0xae00-0xae03,0xaf00-0xaf07 mem 0xfd9fe000-0xfd9fffff irq 17 at device 0.0 on pci5
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
disk scheduler: set policy of acd0 to noop
acd0: DVDR <ATAPI iHAS424 B/GL14> at ata3-master SATA150
ata4: <ATA channel 2> on atapci0
disk scheduler: set policy of acd1 to noop
acd1: DVDROM <NEC DV-5800A/1.07> at ata4-master UDMA33
ohci3: <OHCI (generic) USB controller> mem 0xfe029000-0xfe029fff irq 18 at device 22.0 on pci0
usb5: OHCI version 1.0, legacy support
usb5: <OHCI (generic) USB controller> on ohci3
usb5: USB revision 1.0
uhub5: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 4 ports with 4 removable, self powered
ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfe028000-0xfe0280ff irq 17 at device 22.2 on pci0
usb6: EHCI version 1.0
usb6: companion controller, 4 ports each: usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci2
usb6: USB revision 2.0
uhub6: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 4 ports with 4 removable, self powered
umass0: <Kingston DT Secure, class 0/0, rev 2.00/2.00, addr 2> on uhub6
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
cpu4: <ACPI CPU> on acpi0
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu_pst4: <ACPI CPU P-State> on cpu4
cpu5: <ACPI CPU> on acpi0
cpu_cst5: <ACPI CPU C-State> on cpu5
cpu_pst5: <ACPI CPU P-State> on cpu5
orm0: <Option ROM> at iomem 0xd5000-0xd5fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
it3 at port 0x228-0x22f on isa0
sio2: can't drain, serial port might not exist, disabling
ppc0: cannot reserve I/O port range
hpt27xx: no controller detected.
CAM: Configuring 11 busses
(probe15:umass-sim0:0:0:0): Uninitialized Transport 5:ffffffe0?
CAM: finished configuring all busses
no B_DEVMAGIC (bootdev=0)
Device Mapper version 4.16.0 loaded
dm_target_zero: Successfully initialized
disk scheduler: set policy of da0 to noop
dm_target_crypt: Successfully initialized
disk scheduler: set policy of da1 to noop
dm_target_error: Successfully initialized
disk scheduler: set policy of da2 to noop
disk scheduler: set policy of da3 to noop
disk scheduler: set policy of da4 to noop
disk scheduler: set policy of da5 to noop
disk scheduler: set policy of da8 to noop
disk scheduler: set policy of cd0 to noop
disk scheduler: set policy of cd1 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA INTEL SSDSA2M040 2CV1> Fixed Direct Access SCSI-4 device 
da0: Serial Number CVGB038601QT040NGN
da0: 300.000MB/s transfers
da0: 38166MB (78165360 512 byte sectors: 255H 63S/T 4865C)
da0: supports TRIM
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA ST4000DM000-1F21 CC52> Fixed Direct Access SCSI-4 device 
da1: Serial Number Z300J7Y1
da1: 600.000MB/s transfers
da1: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA ST2000DL003-9VT1 CC3C> Fixed Direct Access SCSI-4 device 
da2: Serial Number 5YD6X7CG
da2: 600.000MB/s transfers
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at ahci0 bus 3 target 0 lun 0
da3: <SATA ST4000DM000-1F21 CC51> Fixed Direct Access SCSI-4 device 
da3: Serial Number Z3009Y5K
da3: 600.000MB/s transfers
da3: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da4 at ahci0 bus 4 target 0 lun 0
da4: <SATA ST4000DM000-1F21 CC52> Fixed Direct Access SCSI-4 device 
da4: Serial Number Z300JPC7
da4: 600.000MB/s transfers
da4: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da5 at ahci0 bus 5 target 0 lun 0
da5: <SATA SAMSUNG HD204UI 1AQ1> Fixed Direct Access SCSI-4 device 
da5: Serial Number S2H7JD1B219473
da5: 300.000MB/s transfers
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Kingston DT Secure 6.51> Removable Direct Access SCSI-0 device 
da8: 40.000MB/s transfers
da8: 961MB (1970175 512 byte sectors: 64H 32S/T 961C)
cd1 at ata2 bus 0 target 0 lun 0
cd1: <_NEC DV-5800A 1.07> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <ATAPI iHAS424   B GL14> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:md0s0
DMA space used: 14512k, remaining available: 16384k
Mounting devfs
(da3:ahci0:3:0:0): daclose() called on an already closed device!
(da4:ahci0:4:0:0): daclose() called on an already closed device!
(da8:umass-sim0:0:0:0): daclose() called on an already closed device!
(da8:umass-sim0:0:0:0): daclose() called on an already closed device!
disk scheduler: set policy of mapper/temporary-cryptsetup-17 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-17 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/root to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
HAMMER(ROOT) recovery check seqno=07b82b09
HAMMER(ROOT) recovery range 300000001c1ea880-300000001c1ea880
HAMMER(ROOT) recovery nexto 300000001c1ea880 endseqno=07b82b0a
HAMMER(ROOT) mounted clean, no recovery needed
chroot_kernel: set new rootnch/rootvnode to /new_root
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/data to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/data2 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/swap to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/backup to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/temporary-cryptsetup-59 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
disk scheduler: set policy of mapper/backup2 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/74
HAMMER read-only -> read-write
HAMMER(DATA) recovery check seqno=03f464c2
HAMMER(DATA) recovery range 300000003e09d200-300000003e09d200
HAMMER(DATA) recovery nexto 300000003e09d200 endseqno=03f464c3
HAMMER(DATA) mounted clean, no recovery needed
HAMMER(DATA2) recovery check seqno=3cfe8ce1
HAMMER(DATA2) recovery range 300000003d6dfb68-300000003d6dfb68
HAMMER(DATA2) recovery nexto 300000003d6dfb68 endseqno=3cfe8ce2
HAMMER(DATA2) mounted clean, no recovery needed
HAMMER(BACKUP) recovery check seqno=027e6b38
HAMMER(BACKUP) recovery range 300000000f070f08-300000000f070f08
HAMMER(BACKUP) recovery nexto 300000000f070f08 endseqno=027e6b39
HAMMER(BACKUP) mounted clean, no recovery needed
HAMMER(BACKUP2) recovery check seqno=00479b40
HAMMER(BACKUP2) recovery range 3000000005d39c50-3000000005d39c50
HAMMER(BACKUP2) recovery nexto 3000000005d39c50 endseqno=00479b41
HAMMER(BACKUP2) mounted clean, no recovery needed