Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
mptable_pci_int_register: conflict PCI int entry for bus 0, dev 21, pin 1, IOAPIC 0.18 -> 0.21
DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
    root@pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
TSC invariant clock: 999907952 Hz, i8254 clock: 1193073 Hz
CPU: AMD G-T40E Processor (1000.01-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x500f20  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 4262386688 (4064 MB)
avail memory = 3973832704 (3789 MB)
LAPIC: AMD LINTEN on
lapic: divisor index 0, frequency 100002748 Hz
Initialize MI interrupts
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd0 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
disk scheduler: set policy of md0 to noop
md0: Malloc disk
ACPI: RSDP 0x00000000000F2B10 000014 (v00 CORE  )
ACPI: RSDT 0x00000000DF162424 000044 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x00000000DF164838 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x00000000DF1624C8 00232B (v02 PCENG  COREBOOT 00010001 INTL 20121114)
ACPI: FACS 0x00000000DF1647F8 000040
ACPI: SPCR 0x00000000DF16492C 000050 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0x00000000DF164980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x00000000DF1649B8 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: HEST 0x00000000DF164A18 000198 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0x00000000DF164BB0 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
ACPI: SSDT 0x00000000DF166240 00030C (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: SSDT 0x00000000DF166550 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <CORE COREBOOT> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
ACPI: Executed 2 blocks of module-level executable AML code
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xa0000-0xbffff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7800000-0xf7803fff,0xf7900000-0xf7900fff irq 16 at device 0.0 on pci1
re0: Hardware rev. 0x2c000000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: MAC address: XX:XX:XX:XX:XX:XX
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re1: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7a00000-0xf7a03fff,0xf7b00000-0xf7b00fff irq 17 at device 0.0 on pci2
re1: Hardware rev. 0x2c000000; PCI-E 125MHz
miibus1: <MII bus> on re1
rgephy1: <8211B/RTL8169S/8110S media interface> on miibus1
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: MAC address: XX:XX:XX:XX:XX:XX
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re2: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7c00000-0xf7c03fff,0xf7d00000-0xf7d00fff irq 18 at device 0.0 on pci3
re2: Hardware rev. 0x2c000000; PCI-E 125MHz
miibus2: <MII bus> on re2
rgephy2: <8211B/RTL8169S/8110S media interface> on miibus2
rgephy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re2: MAC address: XX:XX:XX:XX:XX:XX
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 9280> mem 0xf7e00000-0xf7e0ffff irq 19 at device 0.0 on pci4
ath0: AR9280 mac XXX.X RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ahci0: <AHCI-PCI-SATA> port 0x4000-0x400f,0x4024-0x4027,0x4018-0x401f,0x4020-0x4023,0x4010-0x4017 mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
ahci0: AHCI 1.2 cap 0xf332ff05<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SPM,PMD,SSC,PSC>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 2006<MPSS,POD,SUD>
ahci0.1: Caps 2006<MPSS,POD,SUD>
ahci0.2: Caps 2006<MPSS,POD,SUD>
ahci0.3: Caps 2006<MPSS,POD,SUD>
ahci0.4: Caps 2006<MPSS,POD,SUD>
ahci0.5: Caps 2006<MPSS,POD,SUD>
ahci0.1: No device detected
ahci0.3: No device detected
ahci0.5: No device detected
ahci0.2: No device detected
ahci0.4: No device detected
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.0: Found SSD "ADATA SP310 2.3" serial="XXXXXXXXXXXX"
ahci0.0: tags=32/32 satacap=e70e satacap2=0086 satafea=014c NCQ=YES capacity=30533.83MB
ahci0.0: f85=7469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
usbus0: <AMD SB7x0/SB8x0/SB9x0 USB controller> on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: EHCI version 1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: <AMD SB7x0/SB8x0/SB9x0 USB controller> on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: EHCI version 1.0
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 5 ports with 5 removable, self powered
usbus4: <AMD SB7x0/SB8x0/SB9x0 USB controller> on ohci2
pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
usbus4: 12Mbps Full Speed USB v1.0
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: 5 ports with 5 removable, self powered
usbus5: <AMD SB7x0/SB8x0/SB9x0 USB controller> on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: EHCI version 1.0
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub4: 2 ports with 2 removable, self powered
usbus6: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> on ehci2
km0: <AMD Family 14h temperature sensor> on hostb4
acpi_button0: <Power Button> on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
ACPI: Enabled 6 GPEs in block 00 to 1F
orm0: <Option ROM> at iomem 0xee800-0xeffff on isa0
pmtimer0 on isa0
amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
wdog: Watchdog AMD southbridge registered, max period = 6553500s , period = 30s
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
device_probe_and_attach: vga0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
usbus6: 480Mbps High Speed USB v2.0
ppc0: cannot reserve I/O port range
ugen6.1: <ATI> at usbus6
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA ADATA SP310 2.3> Fixed Direct Access SCSI-4 device 
da0: Serial Number XXXXXXXXXXXX
da0: 600.000MB/s transfers
da0: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C)
da0: supports TRIM
da0s4: cannot find label (fixlabel: raw partition offset != slice offset)
uhub5: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.2: <vendor 0x090c> at usbus1
umass0: <vendor 0x090c Spaceloop 8GB, class 0/0, rev 2.00/11.00, addr 2> on usbus1
disk scheduler: set policy of da8 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: < Spaceloop 8GB 1100> Removable Direct Access SCSI-0 device 
da8: Serial Number XXXXXXXXXXXXXXXX
da8: 40.000MB/s transfers
da8: 7725MB (15820800 512 byte sectors: 255H 63S/T 984C)
ugen6.2: <Generic> at usbus6
umass1: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
disk scheduler: set policy of da9 to noop
da9 at umass-sim1 bus 1 target 0 lun 0
da9: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-4 device 
da9: Serial Number XXXXXXXXXXXX
da9: 40.000MB/s transfers
da9: Attempt to query device size failed: NOT READY, Medium not present
no B_DEVMAGIC (bootdev=0)
Device Mapper version 4.16.0 loaded
dm_target_error: Successfully initialized
dm_target_zero: Successfully initialized