Copyright (c) 2003-2015 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v4.1.0.1549.g1186f3-DEVELOPMENT #0: Tue Jun  2 13:23:38 UTC 2015
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC clock: 1861914306 Hz, i8254 clock: 1193127 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     L9400  @ 1.86GHz (1862.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Thermal and PM Features=0x3<SENSOR,TURBO>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 8478800896 (8086 MB)
avail memory = 7921262592 (7554 MB)
lapic: divisor index 0, frequency 133000447 Hz
Initialize MI interrupts
VMM: VMENTRY_LOAD_IA32_EFER not supported by this CPU
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
disk scheduler: set policy of vn0 to noop
disk scheduler: set policy of vn1 to noop
disk scheduler: set policy of vn2 to noop
disk scheduler: set policy of vn3 to noop
md0: Preloaded image <initrd.img> 15728640 bytes at 0xffffffff82b98b08
disk scheduler: set policy of md0 to noop
disk scheduler: set policy of md1 to noop
md1: Malloc disk
ACPI: RSDP 0x00000000000F7290 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BD95B712 00009C (v01 LENOVO TP-6D    00003220  LTP 00000000)
ACPI: FACP 0x00000000BD95B800 0000F4 (v03 LENOVO TP-6D    00003220 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150515/tbfadt-646)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150515/tbfadt-728)
ACPI: DSDT 0x00000000BD95BBF4 00DF43 (v01 LENOVO TP-6D    00003220 MSFT 03000000)
ACPI: FACS 0x00000000BD98E000 000040
ACPI: SSDT 0x00000000BD95B9B4 000240 (v01 LENOVO TP-6D    00003220 MSFT 03000000)
ACPI: ECDT 0x00000000BD969B37 000052 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
ACPI: APIC 0x00000000BD969B89 000078 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
ACPI: MCFG 0x00000000BD969C01 00003C (v01 LENOVO TP-6D    00003220 LNVO 00000001)
ACPI: HPET 0x00000000BD969C3D 000038 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
ACPI: SLIC 0x00000000BD969DC2 000176 (v01 LENOVO TP-6D    00003220  LTP 00000000)
ACPI: BOOT 0x00000000BD969F38 000028 (v01 LENOVO TP-6D    00003220  LTP 00000001)
ACPI: ASF! 0x00000000BD969F60 0000A0 (v16 LENOVO TP-6D    00003220 PTL  00000001)
ACPI: SSDT 0x00000000BD98D1EA 000578 (v01 LENOVO TP-6D    00003220 INTL 20050513)
ACPI: TCPA 0x00000000BD707000 000032 (v00                 00000000      00000000)
ACPI: DMAR 0x00000000BD706000 000120 (v01        ?        00000001      00000000)
ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef  ApTst    00003000 INTL 20050624)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <LENOVO TP-6D> on motherboard
ACPI: All ACPI Tables successfully acquired
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x66,0x62 on acpi0
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd0000000-0xdfffffff,0xf2000000-0xf23fffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0
pci0: <simple comms> (vendor 0x8086, dev 0x2a44) at device 3.0 irq 16
em0: <Intel(R) PRO/1000 Network Connection ICH9_IGP_M_AMT 7.4.2> port 0x1840-0x185f mem 0xf2925000-0xf2925fff,0xf2700000-0xf271ffff irq 20 at device 25.0 on pci0
em0: MAC address: 00:26:2d:f2:69:8f
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2926c00-0xf2926fff irq 23 at device 26.7 on pci0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: EHCI version 1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x293e) at device 27.0 irq 17
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf2500000-0xf2501fff irq 17 at device 0.0 on pci3
usbus3: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pci4: <memory> (vendor 0x8086, dev 0x444e) at device 0.0 irq 18
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0028)
pci5: <ACPI PCI bus> on pcib4
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf1f00000-0xf1f01fff irq 19 at device 0.0 on pci5
xhci0: 64 bytes context size, 64-bit DMA
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
usbus4 on xhci0
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
usbus4: 5.0Gbps Super Speed USB v3.0
ugen4.1: <0x1912> at usbus4
uhub4: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
usbus5: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
usbus5: 12Mbps Full Speed USB v1.0
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1: 2 ports with 2 removable, self powered
usbus6: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
usbus6: 12Mbps Full Speed USB v1.0
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub2: 2 ports with 2 removable, self powered
uhub4: 4 ports with 4 removable, self powered
usbus7: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2927000-0xf29273ff irq 19 at device 29.7 on pci0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: EHCI version 1.0
ugen7.1: <Intel> at usbus7
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
usbus8: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <MPTABLE PCI-PCI bridge> at device 30.0 on pci0
pci13: <PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0x1c20-0x1c3f,0x1838-0x183b,0x1c40-0x1c47,0x183c-0x183f,0x1c48-0x1c4f mem 0xf2926000-0xf29267ff irq 16 at device 31.2 on pci0
usbus8: 480Mbps High Speed USB v2.0
ugen8.1: <Intel> at usbus8
uhub8: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.2 cap 0xef20ffa3<S64A,NCQ,SSNTF,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS,SXS>, 4 ports, 32 tags/port, gen 2 (3Gbps)
ahci0.0: Caps 4<POD>
ahci0.1: Caps 240004<ESP,HPCP,POD>
uhub3: 6 ports with 6 removable, self powered
uhub8: 6 ports with 6 removable, self powered
ahci0.0: Found SSD "INTEL SSDSC2CT080A4 335u" serial="CVKI336600YX080AGN"
ahci0.0: tags=32/32 satacap=0706 satacap2=0004 satafea=004c NCQ=YES capacity=76319.08MB
ahci0.0: f85=7469 f86=b409 f87=6163 WC=enabled RA=enabled SEC=frozen
ahci0.1: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2930) at device 31.3 irq 23
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE055778FC0 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0EEC13300 00087A (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE01C236120 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE01C0C9180 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
ACPI: Enabled 3 GPEs in block 00 to 3F
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 2 busses
CAM: finished configuring all busses
disk scheduler: set policy of da0 to noop
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA INTEL SSDSC2CT08 335u> Fixed Direct Access SCSI-4 device 
da0: Serial Number CVKI336600YX080AGN
da0: 300.000MB/s transfers
da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
da0: supports TRIM
system power profile changed to 'economy'
no B_DEVMAGIC (bootdev=0)
Device Mapper version 4.16.0 loaded
dm_target_zero: Successfully initialized
dm_target_crypt: Successfully initialized
dm_target_error: Successfully initialized
Mounting root from ufs:md0s0
DMA space used: 19312k, remaining available: 16384k
Mounting devfs
disk scheduler: set policy of mapper/temporary-cryptsetup-17 to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/78
disk scheduler: set policy of mapper/root to noop
dm_target_crypt: Setting min/max mpipe buffers: 2/78
HAMMER(ROOT) recovery check seqno=00106906
HAMMER(ROOT) recovery range 30000000012f2908-30000000012f2908
HAMMER(ROOT) recovery nexto 30000000012f2908 endseqno=00106907
HAMMER(ROOT) mounted clean, no recovery needed
chroot_kernel: set new rootnch/rootvnode to /new_root
HAMMER read-only -> read-write
ugen3.2: <vendor 0x13fe> at usbus3
umass0: <vendor 0x13fe Patriot Memory, class 0/0, rev 2.10/1.00, addr 2> on usbus3
disk scheduler: set policy of da8 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: < Patriot Memory PMAP> Removable Direct Access SCSI-6 device 
da8: 40.000MB/s transfers
da8: 30176MB (61800448 512 byte sectors: 255H 63S/T 3846C)
da8: reading primary partition table: error accessing offset 000000000000 for 512