Copyright (c) 2003-2009 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 2.2.1-RELEASE #1: Mon Apr 27 04:19:39 GMT 2009 root@test29.backplane.com:/usr/obj/usr/src/sys/GENERIC TSC clock: 698450516 Hz, i8254 clock: 1193149 Hz CPU: Intel Pentium III (698.47-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff real memory = 536780800 (524200K bytes) avail memory = 507740160 (495840K bytes) Preloaded elf kernel "/boot/kernel" at 0xc07c5000. Preloaded elf module "/boot/modules/acpi.ko" at 0xc07c51c8. Pentium Pro MTRR support enabled md0: Malloc disk pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00fbc20 ACPI: RSDP @ 0x0xfde50/0x0014 (v 0 DELL ) ACPI: RSDT @ 0x0xfde64/0x0028 (v 1 DELL CPi R 0x27D40115 ASL 0x00000061) ACPI: FACP @ 0x0xfde90/0x0074 (v 1 DELL CPi R 0x27D40115 ASL 0x00000061) ACPI: DSDT @ 0x0xfffe4000/0x2B4C (v 1 INT430 SYSFexxx 0x00001001 MSFT 0x0100000E) ACPI: FACS @ 0x0x1ffff800/0x0040 npx0: on motherboard npx0: INT 16 interface Using MMX optimized bcopy/copyin/copyout acpi0: on motherboard Warning: ACPI is disabling APM's device. You can't run both acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 legacypci0 on motherboard pcib0: on legacypci0 pci0: on pcib0 agp0: mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcib2: at device 30.0 on pci0 pci2: on pcib2 pci2: (vendor=0x125d, dev=0x1998) at 3.0 irq 5 xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem 0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 10 at device 6.0 on pci2 miibus0: on xl0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: MAC address: 00:01:03:89:85:bf pci2: (vendor=0x10b7, dev=0x1007) at 6.1 irq 10 cbb0: at device 15.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci_cfgintr: 0:30 INTC routed to irq 3 pcib2: routed slot 15 INTA to irq 3 intr 10 at 40001/40000 hz, livelocked limit engaged! cbb1: at device 15.1 on pci2 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci_cfgintr: 0:30 INTC routed to irq 3 pcib2: routed slot 15 INTA to irq 3 fwohci0: mem 0xf8ff8000-0xf8ffbfff,0xf8ffc800-0xf8ffcfff irq 10 at device 15.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 39:4f:c0:00:1a:82:d4:01 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 fwe0: MAC address: 3a:4f:c0:82:d4:01 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: on atapci0 dc0: port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,0xf4002800-0xf4002fff irq 3 at device 0.0 on cardbus0 miibus1: on dc0 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: MAC address: 00:10:a4:c7:51:4e ad0: 114473MB at ata0-master UDMA100 acd0: DVDROM at ata0-slave UDMA33 ata1: on atapci0 uhci0: port 0xdce0-0xdcff irq 10 at device 31.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered pmtimer0 on isa0 fdc1: cannot reserve I/O port range vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio2: can't drain, serial port might not exist, disabling ppc1: cannot reserve I/O port range intr 10 at 0/20000 hz, livelock removed Mounting root from hammer:/dev/ad0s1a cd0 at ata0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present intr 10 at 40001/40000 hz, livelocked limit engaged! intr 10 at 16203/20000 hz, livelock removed intr 10 at 40001/40000 hz, livelocked limit engaged! intr 10 at 11930/20000 hz, livelock removed intr 10 at 40001/40000 hz, livelocked limit engaged! intr 10 at 4387/20000 hz, livelock removed intr 10 at 40001/40000 hz, livelocked limit engaged! dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout