Copyright (c) 2003-2009 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 7949e03-DEVELOPMENT #0: Sat Aug 22 01:30:43 CEST 2009 root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC Calibrating clock(s) ... TSC clock: 2493991065 Hz, i8254 clock: 1193297 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2493.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff Features2=0xce3bd Hyperthreading: 4 logical CPUs real memory = 1073283072 (1048128K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00855000 - 0x3ff7ffff, 1064480768 bytes (259883 pages) avail memory = 1027813376 (1003724K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x31 pnpbios: Found PnP BIOS data at 0xc00f5d80 pnpbios: Entry = f0000:6e0a Rev = 1.0 Other BIOS signatures found: Preloaded elf kernel "/boot/kernel" at 0xc0828000. Preloaded elf module "/boot/modules/acpi.ko" at 0xc08282c4. crypto: wlan: <802.11 Link Layer> Pentium Pro MTRR support enabled fildesc_drvinit() building stdin, stdout, stderr: md0: Malloc disk Math emulator present ACPI: RSDP 0xf9be0 00024 (v2 HP ) ACPI: XSDT 0x3ffa0100 0007C (v1 HP ProLiant 20081002 HP 00000097) ACPI: FACP 0x3ffa0290 000F4 (v4 HP ProLiant 20081002 HP 00000097) ACPI: DSDT 0x3ffa0690 04EDE (v2 HP ProLiant 00000073 INTL 20051117) ACPI: FACS 0x3ffae000 00040 ACPI: APIC 0x3ffa0390 00092 (v2 HP ProLiant 20081002 HP 00000097) ACPI: MCFG 0x3ffa0480 0003C (v1 HP ProLiant 20081002 HP 00000097) ACPI: SPMI 0x3ffa04c0 00041 (v5 HP ProLiant 20081002 HP 00000097) ACPI: SLIC 0x3ffa0510 00176 (v1 HP ProLiant 20081002 HP 00000097) ACPI: OEMB 0x3ffae040 00071 (v1 HP ProLiant 20081002 HP 00000097) ACPI: HPET 0x3ffa5570 00038 (v1 HP ProLiant 20081002 HP 00000097) ACPI: EINJ 0x3ffa55b0 00130 (v1 HP ProLiant 20081002 HP 00000097) ACPI: BERT 0x3ffa5740 00030 (v1 HP ProLiant 20081002 HP 00000097) ACPI: ERST 0x3ffa5770 001B0 (v1 HP ProLiant 20081002 HP 00000097) ACPI: HEST 0x3ffa5920 000A8 (v1 HP ProLiant 20081002 HP 00000097) npx0.nexus0.root0 npx0: [tentative] on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout npx0: [attached!] on motherboard acpi0.nexus0.root0 acpi0: [tentative] on motherboard acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both pci_open(1): mode 1 addr port (0x0cf8) is 0x80008058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=65c08086) pcibios: BIOS version 3.00 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 acpi_timer0.acpi0.nexus0.root0 acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0 cpu0.acpi0.nexus0.root0 cpu0: [tentative] on acpi0 cpu_cst0.cpu0.acpi0.nexus0.root0 cpu_cst0: [tentative] on cpu0 cpu_cst0: switching to generic Cx mode cpu_cst0: [attached!] on cpu0 cpu_pst0: Can't get _PCT package - AE_NOT_FOUND cpu0: [attached!] on acpi0 unknown: not probed (disabled) acpi_button0.acpi0.nexus0.root0 acpi_button0: [tentative] on acpi0 acpi_button0: [attached!] on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0 0 0 0 sio0.acpi0.nexus0.root0 sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) acpi0: [attached!] at irq 9 on motherboard pcib0.legacy0.nexus0.root0 pcib0: [tentative] pcibus 0 on motherboard pir0.legacy0.nexus0.root0 pir0: [tentative] on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x60 255 N 17 5 6 7 10 11 12 14 15 0x61 255 N 16 5 6 7 10 11 12 14 15 0x62 255 N 19 5 6 7 10 11 12 14 15 0x63 255 N 18 5 6 7 10 11 12 14 15 0x68 255 N 1 5 6 7 10 11 12 14 15 0x6b 255 N 1 5 6 7 10 11 12 14 15 0x69 255 N 1 5 6 7 10 11 12 14 15 $PIR: Found matching pin for 0.31.INTB at func 2: 5 $PIR: Found matching pin for 0.31.INTC at func 3: 15 $PIR: Found matching pin for 0.29.INTA at func 0: 7 $PIR: Found matching pin for 0.29.INTB at func 1: 5 $PIR: Found matching pin for 0.29.INTC at func 2: 15 $PIR: Found matching pin for 0.26.INTA at func 0: 11 $PIR: Found matching pin for 0.26.INTB at func 1: 14 $PIR: Found matching pin for 0.26.INTC at func 7: 15 $PIR: Found matching pin for 0.26.INTD at func 2: 5 $PIR: Found matching pin for 0.28.INTA at func 0: 11 $PIR: Found matching pin for 0.28.INTB at func 5: 10 $PIR: Found matching pin for 7.0.INTA at func 0: 10 $PIR: Found matching pin for 8.0.INTA at func 0: 11 $PIR: Found matching pin for 5.0.INTA at func 0: 11 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x60 11 Y 17 5 6 7 10 11 12 14 15 0x61 10 Y 16 5 6 7 10 11 12 14 15 0x62 15 Y 19 5 6 7 10 11 12 14 15 0x63 5 Y 18 5 6 7 10 11 12 14 15 0x68 255 N 1 5 6 7 10 11 12 14 15 0x6b 7 Y 1 5 6 7 10 11 12 14 15 0x69 14 Y 1 5 6 7 10 11 12 14 15 $PIR: IRQs used by BIOS: 5 7 10 11 14 15 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 18 0 1 0 0 16 17 0 0 1 19 ] pir0: [attached!] on motherboard pci0.pcib0.legacy0.nexus0.root0 pci0: [tentative] on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x65c0, revid=0x80 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0041 found-> vendor=0x8086, dev=0x65e2, revid=0x80 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00200c80 found-> vendor=0x8086, dev=0x65e3, revid=0x80 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00180c80 found-> vendor=0x8086, dev=0x65f8, revid=0x80 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00300cdf[HOTPLUG] found-> vendor=0x8086, dev=0x65e5, revid=0x80 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0041 found-> vendor=0x8086, dev=0x65e6, revid=0x80 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00280cdf[HOTPLUG] found-> vendor=0x8086, dev=0x65e7, revid=0x80 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0041 found-> vendor=0x8086, dev=0x65f0, revid=0x80 domain=0, bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f0, revid=0x80 domain=0, bus=0, slot=16, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f0, revid=0x80 domain=0, bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f1, revid=0x80 domain=0, bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f3, revid=0x80 domain=0, bus=0, slot=19, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f5, revid=0x80 domain=0, bus=0, slot=21, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x65f6, revid=0x80 domain=0, bus=0, slot=22, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2937, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled found-> vendor=0x8086, dev=0x2938, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=14 map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled found-> vendor=0x8086, dev=0x2939, revid=0x02 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled found-> vendor=0x8086, dev=0x293c, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfccffc00, size 10, enabled found-> vendor=0x8086, dev=0x2940, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG] found-> vendor=0x8086, dev=0x2948, revid=0x02 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x4810, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG] found-> vendor=0x8086, dev=0x294a, revid=0x02 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG] found-> vendor=0x8086, dev=0x2934, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[20]: type I/O Port, range 32, base 0xd080, size 5, enabled found-> vendor=0x8086, dev=0x2935, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled found-> vendor=0x8086, dev=0x2936, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled found-> vendor=0x8086, dev=0x244e, revid=0x92 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2916, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2920, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled map[24]: type I/O Port, range 32, base 0xb400, size 4, enabled found-> vendor=0x8086, dev=0x2930, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[10]: type Memory, range 64, base 0xffffffc00, size 8, enabled pci0: pci0:0:31:3 bar 0x10 too many address bits map[20]: type I/O Port, range 32, base 0x400, size 5, enabled found-> vendor=0x8086, dev=0x2926, revid=0x02 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled map[14]: type I/O Port, range 32, base 0xcc00, size 2, enabled map[18]: type I/O Port, range 32, base 0xc880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xc800, size 2, enabled map[20]: type I/O Port, range 32, base 0xc480, size 4, enabled map[24]: type I/O Port, range 32, base 0xc400, size 4, enabled pcib1.pci0.pcib0.legacy0.nexus0.root0 pcib1: [tentative] at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 pci1: [tentative] on pcib1 pci1: domain=0, physical bus=1 pci1: [attached!] on pcib1 pcib1: [attached!] at device 2.0 on pci0 pcib2.pci0.pcib0.legacy0.nexus0.root0 pcib2: [tentative] at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0 pci2: [tentative] on pcib2 pci2: domain=0, physical bus=2 pci2: [attached!] on pcib2 pcib2: [attached!] at device 3.0 on pci0 pcib3.pci0.pcib0.legacy0.nexus0.root0 pcib3: [tentative] at device 4.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pcib3: Disable PCI Express hot-plug interrupts(0x002f) pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0 pci3: [tentative] on pcib3 pci3: domain=0, physical bus=3 pci3: [attached!] on pcib3 pcib3: [attached!] at device 4.0 on pci0 pcib4.pci0.pcib0.legacy0.nexus0.root0 pcib4: [tentative] at device 5.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: no prefetched decode pci4.pcib4.pci0.pcib0.legacy0.nexus0.root0 pci4: [tentative] on pcib4 pci4: domain=0, physical bus=4 pci4: [attached!] on pcib4 pcib4: [attached!] at device 5.0 on pci0 pcib5.pci0.pcib0.legacy0.nexus0.root0 pcib5: [tentative] at device 6.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xe000-0xefff pcib5: memory decode 0xfcd00000-0xfcefffff pcib5: no prefetched decode pcib5: Disable PCI Express hot-plug interrupts(0x002f) pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0 pci5: [tentative] on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x103c, dev=0x3230, revid=0x03 domain=0, bus=5, slot=0, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 MSI-X supports 4 messages in map 0x10 PCI Express ver.1 cap=0x0001[DEVICE] map[10]: type Memory, range 64, base 0xfce00000, size 20, enabled pcib5: requested memory range 0xfce00000-0xfcefffff: good map[18]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib5: requested I/O range 0xe800-0xe8ff: in range map[1c]: type Memory, range 64, base 0xfcdff000, size 12, enabled pcib5: requested memory range 0xfcdff000-0xfcdfffff: good ciss0.pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0 ciss0: [tentative] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5 ciss0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xfce00000 ciss0: using 256 of 1024 available commands ciss0: firmware 4.12 ciss0: 1 SCSI channels ciss0: signature 'CISS' ciss0: valence 3 ciss0: supported I/O methods 0x80000006 ciss0: active I/O method 0x3 ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x200000 ciss0: server name '' ciss0: heartbeat 0xdc ciss0: 4 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 5, 858112MB online ciss0: [attached!] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5 pci5: [attached!] on pcib5 pcib5: [attached!] at device 6.0 on pci0 pcib6.pci0.pcib0.legacy0.nexus0.root0 pcib6: [tentative] at device 7.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pci6.pcib6.pci0.pcib0.legacy0.nexus0.root0 pci6: [tentative] on pcib6 pci6: domain=0, physical bus=6 pci6: [attached!] on pcib6 pcib6: [attached!] at device 7.0 on pci0 uhci0.pci0.pcib0.legacy0.nexus0.root0 uhci0: [tentative] port 0xd800-0xd81f irq 11 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0 usb0: [tentative] on uhci0 usb0: USB revision 1.0 uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0 uhub0: [tentative] on usb0 uhub0: 2 ports with 2 removable, self powered uhub0: [attached!] on usb0 usb0: [attached!] on uhci0 uhci0: [attached!] port 0xd800-0xd81f irq 11 at device 26.0 on pci0 uhci1.pci0.pcib0.legacy0.nexus0.root0 uhci1: [tentative] port 0xd880-0xd89f irq 14 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0 usb1: [tentative] on uhci1 usb1: USB revision 1.0 uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0 uhub1: [tentative] on usb1 uhub1: 2 ports with 2 removable, self powered uhub1: [attached!] on usb1 usb1: [attached!] on uhci1 uhci1: [attached!] port 0xd880-0xd89f irq 14 at device 26.1 on pci0 uhci2.pci0.pcib0.legacy0.nexus0.root0 uhci2: [tentative] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0 usb2: [tentative] on uhci2 usb2: USB revision 1.0 uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0 uhub2: [tentative] on usb2 uhub2: 2 ports with 2 removable, self powered uhub2: [attached!] on usb2 usb2: [attached!] on uhci2 uhci2: [attached!] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0 pci0: (vendor 0x8086, dev 0x293c) at device 26.7 irq 15 pcib7.pci0.pcib0.legacy0.nexus0.root0 pcib7: [tentative] irq 11 at device 28.0 on pci0 pcib7: domain 0 pcib7: secondary bus 9 pcib7: subordinate bus 9 pcib7: I/O decode 0x0-0x0 pcib7: no prefetched decode pci9.pcib7.pci0.pcib0.legacy0.nexus0.root0 pci9: [tentative] on pcib7 pci9: domain=0, physical bus=9 pci9: [attached!] on pcib7 pcib7: [attached!] irq 11 at device 28.0 on pci0 pcib8.pci0.pcib0.legacy0.nexus0.root0 pcib8: [tentative] irq 11 at device 28.4 on pci0 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0xfd000000-0xfdffffff pcib8: prefetched decode 0xfb000000-0xfbffffff pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0 pci8: [tentative] on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x102b, dev=0x0522, revid=0x02 domain=0, bus=8, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message PCI Express ver.1 cap=0x0011[LEGDEV] map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled pcib8: requested memory range 0xfb000000-0xfbffffff: good map[14]: type Memory, range 32, base 0xfdffc000, size 14, enabled pcib8: requested memory range 0xfdffc000-0xfdffffff: good map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled pcib8: requested memory range 0xfd000000-0xfd7fffff: good vgapci0.pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0 vgapci0: [tentative] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8 vgapci0: [attached!] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8 pci8: [attached!] on pcib8 pcib8: [attached!] irq 11 at device 28.4 on pci0 pcib9.pci0.pcib0.legacy0.nexus0.root0 pcib9: [tentative] irq 10 at device 28.5 on pci0 pcib9: domain 0 pcib9: secondary bus 7 pcib9: subordinate bus 7 pcib9: I/O decode 0x0-0x0 pcib9: memory decode 0xfcf00000-0xfcffffff pcib9: no prefetched decode pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0 pci7: [tentative] on pcib9 pci7: domain=0, physical bus=7 found-> vendor=0x14e4, dev=0x165a, revid=0x00 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit PCI Express ver.1 cap=0x0001[DEVICE] map[10]: type Memory, range 64, base 0xfcff0000, size 16, enabled pcib9: requested memory range 0xfcff0000-0xfcffffff: good bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0 bge0: [tentative] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcff0000 bge0: adjust device control 0x2000 -> 0x5000 bge0: CHIP ID 0xa2000000; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E bge0: Disabling fastboot alignment check failed miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0 miibus0: [tentative] on bge0 ukphy0.miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0 ukphy0: [tentative] on miibus0 ukphy0: OUI 0x0050ef, model 0x002d, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ukphy0: [attached!] on miibus0 miibus0: [attached!] on bge0 md0: reading primary partition table: error accessing offset 000000000000 for 512 bge0: bpf attached bge0: MAC address: 00:21:5a:bc:34:29 bge0: [attached!] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7 pci7: [attached!] on pcib9 pcib9: [attached!] irq 10 at device 28.5 on pci0 uhci3.pci0.pcib0.legacy0.nexus0.root0 uhci3: [tentative] port 0xd080-0xd09f irq 7 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd080 usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0 usb3: [tentative] on uhci3 usb3: USB revision 1.0 uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0 uhub3: [tentative] on usb3 uhub3: 2 ports with 2 removable, self powered uhub3: [attached!] on usb3 usb3: [attached!] on uhci3 uhci3: [attached!] port 0xd080-0xd09f irq 7 at device 29.0 on pci0 uhci4.pci0.pcib0.legacy0.nexus0.root0 uhci4: [tentative] port 0xd400-0xd41f irq 5 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0 usb4: [tentative] on uhci4 usb4: USB revision 1.0 uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0 uhub4: [tentative] on usb4 uhub4: 2 ports with 2 removable, self powered uhub4: [attached!] on usb4 usb4: [attached!] on uhci4 uhci4: [attached!] port 0xd400-0xd41f irq 5 at device 29.1 on pci0 uhci5.pci0.pcib0.legacy0.nexus0.root0 uhci5: [tentative] port 0xd480-0xd49f irq 15 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480 usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0 usb5: [tentative] on uhci5 usb5: USB revision 1.0 uhub5.usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0 uhub5: [tentative] on usb5 uhub5: 2 ports with 2 removable, self powered uhub5: [attached!] on usb5 usb5: [attached!] on uhci5 uhci5: [attached!] port 0xd480-0xd49f irq 15 at device 29.2 on pci0 pcib10.pci0.pcib0.legacy0.nexus0.root0 pcib10: [tentative] at device 30.0 on pci0 pcib10: domain 0 pcib10: secondary bus 10 pcib10: subordinate bus 10 pcib10: I/O decode 0x0-0x0 pcib10: no prefetched decode pcib10: Subtractively decoded bridge. pci10.pcib10.pci0.pcib0.legacy0.nexus0.root0 pci10: [tentative] on pcib10 pci10: domain=0, physical bus=10 pci10: [attached!] on pcib10 pcib10: [attached!] at device 30.0 on pci0 isab0.pci0.pcib0.legacy0.nexus0.root0 isab0: [tentative] at device 31.0 on pci0 isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 isa0: [tentative] on isab0 isa0: [attached!] on isab0 isab0: [attached!] at device 31.0 on pci0 atapci0.pci0.pcib0.legacy0.nexus0.root0 atapci0: [tentative] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480 atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb400 ata2.atapci0.pci0.pcib0.legacy0.nexus0.root0 ata2: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00 ata2: reset tp1 mask=03 ostat0=7f ostat1=7f ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff ata2: reset tp2 stat0=ff stat1=ff devices=0x0 ata2: [attached!] on atapci0 ata3.atapci0.pci0.pcib0.legacy0.nexus0.root0 ata3: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [attached!] on atapci0 atapci0: [attached!] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0 pci0: (vendor 0x8086, dev 0x2930) at device 31.3 irq 15 atapci1.pci0.pcib0.legacy0.nexus0.root0 atapci1: [tentative] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc480 atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc400 ata4.atapci1.pci0.pcib0.legacy0.nexus0.root0 ata4: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc00 ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ukbd0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0 ukbd0: [tentative] on uhub3 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 ukbd0: [attached!] on uhub3 ums0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0 ums0: [tentative] on uhub3 ums0: 8 buttons and Z dir. ums0: [attached!] on uhub3 ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDR drive at ata4 as master acd0: read 4134KB/s (4134KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc ata4: [attached!] on atapci1 ata5.atapci1.pci0.pcib0.legacy0.nexus0.root0 ata5: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc880 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc800 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [attached!] on atapci1 atapci1: [attached!] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0 pci0: [attached!] on pcib0 pcib0: [attached!] pcibus 0 on motherboard ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed sio-: sio0 exists, using next available unit number sio-: sio1 exists, using next available unit number sio-: sio2 exists, using next available unit number sio-: sio3 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 pmtimer0 [tentative] on isa0 pmtimer0 [attached!] on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 adv0 [tentative] failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 [tentative] failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 [tentative] failed to probe at port 0x134-0x137 on isa0 aic0 [tentative] failed to probe at port 0x140-0x15f on isa0 atkbdc0: [tentative] failed to probe at port 0x60 on isa0 vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 vga0: [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vga0: [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 sc0: [tentative] at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sc0: [attached!] at flags 0x100 on isa0 lm0 [tentative] failed to probe at port 0x290-0x297 on isa0 it0 [tentative] failed to probe at port 0x290-0x297 on isa0 it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0 it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0 sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio2: can't drain, serial port might not exist, disabling sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio3: not probed (disabled) sio4: not probed (disabled) ppc0: parallel port not found. ppc0: [tentative] failed to probe at irq 7 on isa0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors 0 accounted for Device configuration finished. acd0: reading primary partition table: error accessing offset 000000000000 for 2048 sl0: bpf attached crypto: assign driver 0, flags 2 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 faith0: bpf attached lo0: bpf attached (probe0:ata2:0:0:0): error 22 (probe0:ata2:0:0:0): Unretryable Error ppp0: bpf attached ip: MPSAFE arp: MPSAFE (probe1:ata2:0:0:0): error 22 (probe1:ata2:0:0:0): Unretryable Error pass0 at ciss0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-5 device pass0: Serial Number PA53COMPAQ RAID pass0: 135.168MB/s transfers pass1 at ata2 bus 0 target 0 lun 0 pass1: Removable CD-ROM SCSI-0 device pass1: 3.300MB/s transfers da0 at ciss0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-5 device da0: Serial Number PA53COMPAQ RAID da0: 135.168MB/s transfers da0: 858210MB (1757614684 512 byte sectors: 255H 32S/T 65535C) cd0 at ata2 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: cd present [235950 x 2048 byte records] bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1 ATA PseudoRAID loaded tempname: type 0xa5, start 63, end = 1757613311, size 1757613249 : OK tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic Mounting root from cd9660:cd0 tryroot cd0 tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic iso_mountroot(): using session at block 0 tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic Mounting devfs start_init: trying /sbin/init tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic tempname: invalid primary partition table: no magic umass0.uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0 umass0: [tentative] on uhub4 umass0:6:0:-1: Attached to scbus6 umass0: [attached!] on uhub4 pass8 at umass-sim0 bus 0 target 0 lun 0 pass8: Removable Direct Access SCSI-0 device pass8: 1.000MB/s transfers da8 at umass-sim0 bus 0 target 0 lun 0 da8: Removable Direct Access SCSI-0 device da8: 1.000MB/s transfers da8: 983MB (2013184 512 byte sectors: 64H 32S/T 983C) tempname: type 0xe, start 32, end = 2013183, size 2013152 : OK