Copyright (c) 2003-2010 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly v2.8.2.32.g6c20d-RELEASE #6: Sun Mar 13 22:24:36 CET 2011 root@trilian.fritz.box:/usr/obj/usr/src/sys/X86_64_GENERIC TSC clock: 2800221106 Hz, i8254 clock: 1193209 Hz CPU: AMD Athlon(tm) II X2 240e Processor (2800.18-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f62 Stepping = 2 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x37ff Cores per package: 2 real memory = 4024758272 (3838 MB) avail memory = 3742556160 (3569 MB) module_register: module pci/ahci already exists! Module pci/ahci failed to register: 17 FQ scheduler policy version 1.0 loaded No policy for md0 specified, or policy not found disk scheduler: set policy of md0 to noop md0: Malloc disk kbd0 at kbdmux0 ACPI: RSDP 0xfae50 00024 (v2 ACPIAM) ACPI: XSDT 0xcfeb0100 0005C (v1 051710 XSDT1919 20100517 MSFT 00000097) ACPI: FACP 0xcfeb0290 000F4 (v4 051710 FACP1919 20100517 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0 0/1 20090521 tbfadt-655 ACPI: DSDT 0xcfeb0450 09C6C (v2 88GCO 88GCO517 00000001 INTL 20051117) ACPI: FACS 0xcfebe000 00040 ACPI: APIC 0xcfeb0390 0007C (v2 051710 APIC1919 20100517 MSFT 00000097) ACPI: MCFG 0xcfeb0410 0003C (v1 051710 OEMMCFG 20100517 MSFT 00000097) ACPI: OEMB 0xcfebe040 00072 (v1 051710 OEMB1919 20100517 MSFT 00000097) ACPI: SRAT 0xcfeba0c0 000C8 (v3 AMD FAM_F_10 00000002 AMD 00000001) ACPI: HPET 0xcfeba190 00038 (v1 051710 OEMHPET 20100517 MSFT 00000097) ACPI: SSDT 0xcfeba1d0 00458 (v1 A M I POWERNOW 00000001 AMD 00000001) cryptosoft0: on motherboard acpi0: <051710 XSDT1919> on motherboard objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both ACPI HPET table warning: Sequence is non-zero (2) acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: frequency 14318180 acpi_button0: on acpi0 acpi_tz0: on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A cpu0: on acpi0 cpu_cst0: on cpu0 cpu_pst0: on cpu0 cpu_pst0: Unsupported _PSD NumProcessors (2) device_probe_and_attach: cpu_pst0 attach returned 6 pcib0: pcibus 0 on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xd000-0xd0ff mem 0xfe800000-0xfe8fffff,0xfe9f0000-0xfe9fffff,0xd0000000-0xdfffffff irq 11 at device 5.0 on pci1 pcm0: mem 0xfe9e8000-0xfe9ebfff irq 10 at device 5.1 on pci1 pcib2: irq 10 at device 7.0 on pci0 pci2: on pcib2 re0: port 0xe800-0xe8ff mem 0xfdff8000-0xfdffbfff,0xfdfff000-0xfdffffff irq 10 at device 0.0 on pci2 re0: Hardware rev. 0x28000000; MAC ver. 0x2a; PCI-E 125MHz miibus0: on re0 rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: MAC address: 00:30:67:28:40:d3 ahci0: port 0x8000-0x800f,0x9000-0x9003,0xa000-0xa007,0xb000-0xb003,0xc000-0xc007 mem 0xfe7ffc00-0xfe7fffff irq 9 at device 17.0 on pci0 ahci0: AHCI 1.1 capabilities 0xf722ff83, 4 ports, 32 tags/port, gen 1 (1.5Gbps) and 2 (3Gbps) ahci0.0: Caps 42006 ahci0.1: Caps 42006 ahci0.2: Caps 42006 ahci0.3: Caps 42006 ahci0.3: No device detected ahci0.2: No device detected ahci0.0: Failing all commands: 00000002 ahci0.0: PMPROBE(1) No Port Multiplier was found. ahci0.1: Failing all commands: 00000002 ahci0.1: PMPROBE(1) No Port Multiplier was found. ahci0.0: PMPROBE(2) No Port Multiplier was found. ahci0.1: PMPROBE(2) No Port Multiplier was found. ahci0.0: Found DISK "WDC WD1600BJKT-75F4T0 11.01A11" serial="WD-WXC0A9997024" ahci0.0: tags=32/32 satacap=0706 satafea=004c NCQ=YES capacity=152627.83MB ahci0.0: f85=7469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=freezing ahci0.1: Found DISK "ST3320613AS CC4H" serial="9SZ5DSCA" ahci0.1: tags=32/32 satacap=0506 satafea=0048 NCQ=YES capacity=305245.33MB ahci0.1: f85=3469 f86=be01 f87=4163 WC=enabled RA=enabled SEC=freezing ohci0: mem 0xfe7fe000-0xfe7fefff irq 7 at device 18.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfe7fd000-0xfe7fdfff irq 7 at device 18.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xfe7ff800-0xfe7ff8ff irq 10 at device 18.2 on pci0 usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered uhub3: on uhub2 uhub3: multiple transaction translators uhub3: 4 ports with 4 removable, self powered ohci2: mem 0xfe7fc000-0xfe7fcfff irq 11 at device 19.0 on pci0 usb3: OHCI version 1.0, legacy support usb3: on ohci2 usb3: USB revision 1.0 uhub4: on usb3 uhub4: 3 ports with 3 removable, self powered ohci3: mem 0xfe7f7000-0xfe7f7fff irq 11 at device 19.1 on pci0 usb4: OHCI version 1.0, legacy support usb4: on ohci3 usb4: USB revision 1.0 uhub5: on usb4 uhub5: 3 ports with 3 removable, self powered ehci1: mem 0xfe7ff400-0xfe7ff4ff irq 10 at device 19.2 on pci0 usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: on ehci1 usb5: USB revision 2.0 uhub6: on usb5 uhub6: 6 ports with 6 removable, self powered pci0: (vendor 0x1002, dev 0x4385) at device 20.0 atapci0: port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0 ata0: on atapci0 ata1: on atapci0 No policy for acd0 specified, or policy not found disk scheduler: set policy of acd0 to noop acd0: DVDR at ata1-master UDMA33 pcm1: mem 0xfe7f0000-0xfe7f3fff irq 7 at device 20.2 on pci0 isab0: at device 20.3 on pci0 isa0: on isab0 pcib3: at device 20.4 on pci0 pci3: on pcib3 ath0: mem 0xfebf0000-0xfebfffff irq 11 at device 5.0 on pci3 ath0: AR2413 mac 7.8 RF2413 phy 4.5 ohci4: mem 0xfe7f6000-0xfe7f6fff irq 11 at device 20.5 on pci0 usb6: OHCI version 1.0, legacy support usb6: on ohci4 usb6: USB revision 1.0 uhub7: on usb6 uhub7: 2 ports with 2 removable, self powered pmtimer0 on isa0 atkbdc0: at port 0x60,0x64 on isa0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio2: can't drain, serial port might not exist, disabling ppc0: cannot reserve I/O port range ums0: on uhub0 ums0: 3 buttons and Z dir. pcm0: pcm0: pcm1: pcm1: CAM: Configuring 6 busses CAM: finished configuring all busses No policy for cd0 specified, or policy not found disk scheduler: set policy of cd0 to noop No policy for da0 specified, or policy not found disk scheduler: set policy of da0 to noop No policy for da1 specified, or policy not found disk scheduler: set policy of da1 to noop da0 at ahci0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: Serial Number WD-WXC0A9997024 da0: 300.000MB/s transfers da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C) da1 at ahci0 bus 1 target 0 lun 0 da1: Fixed Direct Access SCSI-4 device da1: Serial Number 9SZ5DSCA da1: 300.000MB/s transfers da1: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C) no B_DEVMAGIC (bootdev=0) Device Mapper version 4.16.0 loaded cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ukbd0: on uhub0 kbd1 at ukbd0 uhid0: on uhub0 Mounting root from hammer:serno/WD-WXC0A9997024.s2d tryroot serno/WD-WXC0A9997024.s2d HAMMER(ROOT) recovery check seqno=0276025d HAMMER(ROOT) recovery range 30000000018f8f60-30000000018fd320 HAMMER(ROOT) recovery nexto 30000000018fcc60 endseqno=027602d5 HAMMER(ROOT) recovery undo 30000000018f8f60-30000000018fd320 (17344 bytes)(RW) HAMMER(ROOT) Found REDO_SYNC 30000000018fcc60 HAMMER(ROOT) recovery complete HAMMER(ROOT) recovery redo 30000000018f8f60-30000000018fd320 (17344 bytes)(RW) HAMMER(ROOT) Embedded extended redo 30000000018fcc60, -15616 extbytes HAMMER(ROOT) End redo recovery Mounting devfs HAMMER(DATA) recovery check seqno=011c6170 HAMMER(DATA) recovery range 300000000f8d8b60-300000000f8d8b60 HAMMER(DATA) recovery nexto 300000000f8d8b60 endseqno=011c6171 HAMMER(DATA) mounted clean, no recovery needed wlan0: MAC address: d8:5d:4c:9f:e9:9a ath0: ath_chan_set: unable to reset channel 6 (2437 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 6 (2437 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 7 (2442 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 2 (2417 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 4 (2427 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 8 (2447 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 10 (2457 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 1 (2412 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 11 (2462 MHz, flags 0x480), hal status 3 ath0: ath_chan_set: unable to reset channel 13 (2472 MHz, flags 0x480), hal status 3