Bug #1091

Problems with SiI3112A

Added by zb almost 6 years ago. Updated over 5 years ago.

Status:ClosedStart date:
Priority:NormalDue date:
Assignee:-% Done:

0%

Category:-
Target version:-

Description

Hallo,

Didn't try DragonFlyBSD yet; I wanted to give it a shot - but it seems to be
unable to access my harddisk.

I'm using PCI card with Silicon Image 3112A adaptor, with WD 40 GB harddisk.
The disk works without any problems under FreeDOS, Linux, FreeBSD, OpenBSD -
but I noticed a year ago similar problems under NetBSD. Unfortunately,
NetBSD devs weren't interested in fixing the bug. Is DragonFly's SiI3112A
driver taken from NetBSD?

Are DragonFly's devs willing to identify the problem? If so: what other
details could I post here, to help to identify the problem?
--
pozdrawiam / regards

Zbigniew Baniewski

History

#1 Updated by corecode almost 6 years ago

Could you post the complete output of pciconf -lv and dmesg of a verbose
boot (i.e. boot -v on the loader prompt)?

cheers
simon

#2 Updated by zb almost 6 years ago

On Sun, Jul 27, 2008 at 02:37:01PM -0000, Simon 'corecode' Schubert wrote:

agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISBridgeA'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
none1@pci0:9:0: class=0x040100 card=0x005a1102 chip=0x00041102 rev=0x03 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'Creative SB Audigy 2 ZS (WDM) Audigy Audio Processor'
class = multimedia
subclass = audio
none2@pci0:9:1: class=0x098000 card=0x00401102 chip=0x70031102 rev=0x03 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'EMU10K2 Creative Labs SB Audigy MIDI/Game port'
class = input device
fwohci0@pci0:9:2: class=0x0c0010 card=0x00101102 chip=0x40011102 rev=0x01 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'EMU10K1 Audigy IEEE1394a Firewire Controller'
class = serial bus
subclass = FireWire
xl0@pci0:11:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905-TX Fast Etherlink 10/100 PCI TX NIC'
class = network
subclass = ethernet
ohci0@pci0:13:0: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi/ULi)'
device = 'M5273 A1 for windows 98 OpenHCI 1.1 USB to 2.0'
class = serial bus
subclass = USB
ohci1@pci0:13:1: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi/ULi)'
device = 'M5273 A1 for windows 98 OpenHCI 1.1 USB to 2.0'
class = serial bus
subclass = USB
ohci2@pci0:13:2: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi/ULi)'
device = 'M5273 A1 for windows 98 OpenHCI 1.1 USB to 2.0'
class = serial bus
subclass = USB
none3@pci0:13:3: class=0x0c0320 card=0x527210b9 chip=0x523910b9 rev=0x01 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi/ULi)'
device = 'USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
atapci1@pci0:15:0: class=0x010400 card=0x61121095 chip=0x31121095 rev=0x01 hdr=0x00
vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
device = 'SiI 3112 SATALink/SATARaid Controller'
class = mass storage
subclass = RAID
none4@pci0:17:0: class=0x040000 card=0x00011461 chip=0x036e109e rev=0x02 hdr=0x00
vendor = 'Conexant (Was: Brooktree Corp)'
device = 'Bt878/Fusion 878A Mediastream Controller'
class = multimedia
subclass = video
none5@pci0:17:1: class=0x048000 card=0x00011461 chip=0x0878109e rev=0x02 hdr=0x00
vendor = 'Conexant (Was: Brooktree Corp)'
device = '7610144D&REV_02\4&1F7DBC9F&0&09F0 TV Video Capture'
class = multimedia
none6@pci1:0:0: class=0x030000 card=0x200517af chip=0x49661002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV250 Radeon 9000/9000 Pro'
class = display
subclass = VGA
none7@pci1:0:1: class=0x038000 card=0x200417af chip=0x496e1002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV250 Radeon 9000/9000 Pro - Secondary'
class = display

Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 400965286 Hz, i8254 clock: 1193350 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x007c8000 - 0x0ffdffff, 260145152 bytes (63512 pages)
avail memory = 247439360 (241640K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb080
bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb520
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bf00 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc079b000.
Preloaded elf module "/modules/acpi.ko" at 0xc079b1f4.
crypto: <crypto core>
wlan: <802.11 Link Layer>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fde70
PCI-Only Interrupts: 10 11 12 14
Location Bus Device Pin Link IRQs
slot 1 0 19 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 19 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 0 17 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 0 13 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 0 11 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 6 0 9 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 7 0 8 D 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
ACPI: RSDP @ 0x0xf70a0/0x0014 (v 0 IntelR)
ACPI: RSDT @ 0x0xfff3000/0x002C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP @ 0x0xfff3040/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT @ 0x0xfff30c0/0x2311 (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x0100000C)
ACPI: FACS @ 0x0xfff0000/0x0040
ACPI: BOOT @ 0x0xfff5400/0x0028 (v 1 IntelR 0x00000000 0x00000000)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <IntelR AWRDACPI> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x4008-0x400b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x4008-0x400b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU (3 Cx states)> [tentative] on acpi0
cpu0: <ACPI CPU (3 Cx states)> [attached!] port 0x4015,0x4014,0x4010-0x4013 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
fdc0.acpi0.nexus0.root0
fdc0: <NEC 72065B or clone> [tentative] port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0.fdc0.acpi0.nexus0.root0
fd0: <1440-KB 3.5" drive> [tentative] on fdc0 drive 0
fd0: <1440-KB 3.5" drive> [attached!] on fdc0 drive 0
fd1.fdc0.acpi0.nexus0.root0
fd1: <1200-KB 5.25" drive> [tentative] on fdc0 drive 1
fd1: <1200-KB 5.25" drive> [attached!] on fdc0 drive 1
fdc0: <NEC 72065B or clone> [attached!] port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0: irq maps: 0x40 0x50 0x40 0x40
sio0.acpi0.nexus0.root0
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0.acpi0.nexus0.root0
ppc0 [tentative] port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0.ppc0.acpi0.nexus0.root0
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0.ppc0.acpi0.nexus0.root0
plip0: <PLIP network interface> [tentative] on ppbus0
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
ppc0 [attached!] port 0x378-0x37f irq 7 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0067
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <IntelR AWRDACPI> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base d8000000, size 26
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=[STORAGE]01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000a000, size 5
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=[BRIDGE]06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 0000a400, size 5
found-> vendor=0x1102, dev=0x0004, revid=0x03
bus=0, slot=9, func=0
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000a800, size 3
found-> vendor=0x1102, dev=0x7003, revid=0x03
bus=0, slot=9, func=1
class=[INPUTDEV]09-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base df005000, size 11
map[14]: type 1, range 32, base df000000, size 14
found-> vendor=0x1102, dev=0x4001, revid=0x01
bus=0, slot=9, func=2
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=12
map[10]: type 1, range 32, base 0000ac00, size 7
map[14]: type 1, range 32, base df004000, size 7
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=11, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base df006000, size 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=13, func=0
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base df007000, size 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=13, func=1
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=c, irq=12
map[10]: type 1, range 32, base df008000, size 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=13, func=2
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[10]: type 1, range 32, base df009000, size 8
found-> vendor=0x10b9, dev=0x5239, revid=0x01
bus=0, slot=13, func=3
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 0000b000, size 3
map[14]: type 1, range 32, base 0000b400, size 2
map[18]: type 1, range 32, base 0000b800, size 3
map[1c]: type 1, range 32, base 0000bc00, size 2
map[20]: type 1, range 32, base 0000c000, size 4
map[24]: type 1, range 32, base df00a000, size 9
found-> vendor=0x1095, dev=0x3112, revid=0x01
bus=0, slot=15, func=0
class=[STORAGE]01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base df00b000, size 12
found-> vendor=0x109e, dev=0x036e, revid=0x02
bus=0, slot=17, func=0
class=[MULTIMEDIA]04-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base df00c000, size 12
found-> vendor=0x109e, dev=0x0878, revid=0x02
bus=0, slot=17, func=1
class=[MULTIMEDIA]04-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=12
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> [tentative] mem 0xd8000000-0xdbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
agp0: <Intel 82443BX (440 BX) host to PCI bridge> [attached!] mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> [tentative] at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xdc000000-0xddffffff
pcib1: prefetched decode 0xd0000000-0xd7ffffff
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base d0000000, size 26
map[14]: type 1, range 32, base 00009000, size 8
map[18]: type 1, range 32, base dd000000, size 16
found-> vendor=0x1002, dev=0x4966, revid=0x01
bus=1, slot=0, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base d4000000, size 26
map[14]: type 1, range 32, base dd010000, size 16
found-> vendor=0x1002, dev=0x496e, revid=0x01
bus=1, slot=0, func=1
class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci1: <ATI model 4966 graphics accelerator> (vendor=0x1002, dev=0x4966) at 0.0 irq 12
pci1: <ATI model 496e graphics accelerator> (vendor=0x1002, dev=0x496e) at 0.1
pci1: <PCI bus> [attached!] on pcib1
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> [attached!] at device 1.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <Intel 82371AB PCI to ISA bridge> [tentative] at device 7.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <Intel 82371AB PCI to ISA bridge> [attached!] at device 7.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel PIIX4 UDMA33 controller> [tentative] port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: setting UDMA33 on PIIX4 chip
acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master
acd0: read 6876KB/s (6876KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel PIIX4 UDMA33 controller> [attached!] port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> [tentative] port 0xa000-0xa01f irq 10 at device 7.2 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> [attached!] on uhci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> [attached!] port 0xa000-0xa01f irq 10 at device 7.2 on pci0
pci0: <Intel 82371AB Power management controller> (vendor=0x8086, dev=0x7113) at 7.3
pci0: <unknown card> (vendor=0x1102, dev=0x0004) at 9.0 irq 11
pci0: <unknown card> (vendor=0x1102, dev=0x7003) at 9.1
fwohci0: vendor=1102, dev=4001
fwohci0.pci0.pcib0.legacypci0.nexus0.root0
fwohci0: <1394 Open Host Controller Interface> [tentative] mem 0xdf000000-0xdf003fff,0xdf005000-0xdf0057ff irq 12 at device 9.2 on pci0
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3c:00:81:00:e7:1f
fwohci0: resetting OHCI...done (loop=0)
fwohci0: phy read failed(1).
fwohci0: fwphy_rddata: 0x2 loop=1, retry=1
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
fwe0.firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:02:3c:00:e7:1f
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp0.firewire0.fwohci0.pci0.pcib0.legacypci0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434000 OUTL ST2 ALL ALL 12 00000000 0f434080 8411:000d RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <1394 Open Host Controller Interface> [attached!] mem 0xdf000000-0xdf003fff,0xdf005000-0xdf0057ff irq 12 at device 9.2 on pci0
xl0.pci0.pcib0.legacypci0.nexus0.root0
xl0: <3Com 3c905B-TX Fast Etherlink XL> [tentative] port 0xac00-0xac7f mem 0xdf004000-0xdf00407f irq 10 at device 11.0 on pci0
xl0: using port I/O
xl0: type 90XB
xl0: media options word: a
xl0: found MII/AUTO
miibus0.xl0.pci0.pcib0.legacypci0.nexus0.root0
miibus0: <MII bus> [tentative] on xl0
xlphy0.miibus0.xl0.pci0.pcib0.legacypci0.nexus0.root0
xlphy0: <3Com internal media interface> [tentative] on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xlphy0: <3Com internal media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on xl0
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
xl0: bpf attached
xl0: MAC address: 00:50:04:34:fd:c1
xl0: <3Com 3c905B-TX Fast Etherlink XL> [attached!] port 0xac00-0xac7f mem 0xdf004000-0xdf00407f irq 10 at device 11.0 on pci0
ohci0.pci0.pcib0.legacypci0.nexus0.root0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] mem 0xdf006000-0xdf006fff irq 10 at device 13.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1.ohci0.pci0.pcib0.legacypci0.nexus0.root0
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] on ohci0
usb1: USB revision 1.0
uhub1.usb1.ohci0.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] on ohci0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] mem 0xdf006000-0xdf006fff irq 10 at device 13.0 on pci0
ohci1.pci0.pcib0.legacypci0.nexus0.root0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] mem 0xdf007000-0xdf007fff irq 12 at device 13.1 on pci0
usb2: OHCI version 1.0, legacy support
usb2.ohci1.pci0.pcib0.legacypci0.nexus0.root0
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] on ohci1
usb2: USB revision 1.0
uhub2.usb2.ohci1.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] on ohci1
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] mem 0xdf007000-0xdf007fff irq 12 at device 13.1 on pci0
ohci2.pci0.pcib0.legacypci0.nexus0.root0
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] mem 0xdf008000-0xdf008fff irq 11 at device 13.2 on pci0
usb3: OHCI version 1.0, legacy support
usb3.ohci2.pci0.pcib0.legacypci0.nexus0.root0
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] on ohci2
usb3: USB revision 1.0
uhub3.usb3.ohci2.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] on ohci2
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] mem 0xdf008000-0xdf008fff irq 11 at device 13.2 on pci0
pci0: <USB controller> (vendor=0x10b9, dev=0x5239) at 13.3 irq 14
atapci1.pci0.pcib0.legacypci0.nexus0.root0
atapci1: <SiI 3112 SATA150 controller> [tentative] port 0xc000-0xc00f,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 mem 0xdf00a000-0xdf00a1ff irq 11 at device 15.0 on pci0
ata2.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci1
intr 11 at 40001/40000 hz, livelocked limit engaged!
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
bus_explore done
sbp_post_explore
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
intr 11 at 40003/20000 hz, in livelock
ums0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> [tentative] on uhub0
ums0: 4 buttons and Z dir.
ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> [attached!] on uhub0
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150
ad4: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci1
ata3.atapci1.pci0.pcib0.legacypci0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci1
ata3: SATA connect status=00000000
ata3: <ATA channel 1> [attached!] on atapci1
atapci1: <SiI 3112 SATA150 controller> [attached!] port 0xc000-0xc00f,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 mem 0xdf00a000-0xdf00a1ff irq 11 at device 15.0 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 17.0 irq 12
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 17.1 irq 12
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
ahc_isa_probe 10: ioport 0xac00 alloc failed
fdc-: fdc0 exists, using next available unit number
atkbdc-: atkbdc0 exists, using next available unit number
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
ppc-: ppc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
orm0: <Option ROM> [tentative] at iomem 0xc0000-0xccfff on isa0
orm0: <Option ROM> [attached!] at iomem 0xc0000-0xccfff on isa0
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc1: cannot reserve I/O port range
fdc1 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290 on isa0
it0 [tentative] failed to probe at port 0x290 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
ppc1: parallel port found at 0x378
ppc1: cannot reserve I/O port range
ppc1: <Parallel port> [tentative] failed to probe at port 0x378-0x37f irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
intr 11 at 10/20000 hz, livelock removed
faith0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe1:sbp0:0:2:0): error 22
(probe1:sbp0:0:2:0): Unretryable Error
(probe1:sbp0:0:3:0): error 22
(probe1:sbp0:0:3:0): Unretryable Error
(probe1:sbp0:0:4:0): error 22
(probe1:sbp0:0:4:0): Unretryable Error
(probe1:sbp0:0:5:0): error 22
(probe1:sbp0:0:5:0): Unretryable Error
(probe1:sbp0:0:6:0): error 22
(probe1:sbp0:0:6:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST RW/DVD GCC-4480B 1.02> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4480B 1.02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [159291 x 2048 byte records]
bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1
ATA PseudoRAID loaded
Mounting root from cd9660:cd0c
cd0: invalid primary partition table: no magic
iso_mountroot(): using session at block 0
cd0: invalid primary partition table: no magic
start_init: trying /sbin/init
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_tz0: _CRT value is absurd, ignored (200.0C)
fd: si_iosize_max not set!
fd0: hard error reading offset 000000000000 for 2048 (No status)
fd: si_iosize_max not set!
fd1: hard error reading offset 000000000000 for 2048 (No status)
fwohci0: fwohci_set_intr: 1
start IR DMA 0x0
fwohci0: maxdesc: 4
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434080 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434080 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434080 OUTL ST0 ALL ALL 342 06035000 0f434100 8451:b878 RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434100 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434100 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434100 OUTL ST0 ALL ALL 342 0f54a800 0f434180 8451:17e8 RUN,ACTIVE, ack complete(11)
fwohci0: maxdesc: 5
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434180 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x00580000 0x00000000 0x00000000
0f434180 OUTM ST0 NEV NEV 56 0f0306c8 00000000 0000:0000 Nostat
0f434180 OUTM ST0 NEV NEV 8 07f4e74c 00000000 0000:0000 Nostat
0f434180 OUTL ST0 ALL ALL 24 07f4e84c 0f434200 8451:6420 RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434200 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434200 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434200 OUTL ST0 ALL ALL 342 0f54a800 0f434280 8451:97e3 RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434280 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434280 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434280 OUTL ST0 ALL ALL 342 0f54a800 0f434300 8451:57e2 RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434300 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434300 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434300 OUTL ST0 ALL ALL 342 0f54a800 0f434380 8451:97e4 RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434380 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434380 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434380 OUTL ST0 ALL ALL 342 0f54a800 0f434400 8451:d7ed RUN,ACTIVE, ack complete(11)
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
0f434400 OUTM ST2 NEV NEV 8 00000000 00000000 0000:0000 Nostat
0x000201a0 0x01580000 0x00000000 0x00000000
0f434400 OUTM ST0 NEV NEV 2 0f0306fc 00000000 0000:0000 Nostat
0f434400 OUTL ST0 ALL ALL 342 0f54a800 0f434480 8451:77e8 RUN,ACTIVE, ack complete(11)

#3 Updated by zb almost 6 years ago

On Sun, Jul 27, 2008 at 02:37:01PM -0000, Simon 'corecode' Schubert wrote:

Forgive me (most probably) false alarm - I'm just pretty new to DragonFly,
as I wrote.

That three (Net/Open/Free) BSD-s have a bit different (but common for them)
approach, when one types just "fdisk" alone: it reports the partitions of
recognized disk devices (if there were recognized any at all). Under DF
typing just "fdisk" I've got a response: "cannot open any disk devices;
device not configured" (if I memorized correctly). Having in mind that
mentioned NetBSD-issues, I've made an assumption, that it's very similar
case. Additionally: reading about FreeBSD-roots of DF I was expecting very
similar behaviour.

But a while ago I've tried to: "fdisk /dev/ad4" - and voila! The partitions
have been listed. So, although I didn't made the installation to HDD yet
(must save some data first), it seems, that my report wasn't precise. My
fault, sorry - just didn't examine dmesg's output closely enough.
--
pozdrawiam / regards

Zbigniew Baniewski

#4 Updated by aoiko over 5 years ago

Not an actual problem.

Also available in: Atom PDF