Bug #2459

Updated by tuxillo 5 months ago

With the x86_64 snapshot from Oct 30 2012, I am unable to use the NIC or USB

storage drives on a probook 4510s. I have the same trouble with 3.2.1.



If attempting to use the NIC, I get a number of these messages:



msk0: watchdog timeout (missed Tx interrupts) -- recovering



If I plug in a USB drive, it is simply unrecognized. It also appears as if

the port I have plugged it into shuts itself down... I have these drives

that have a light on them when plugged in to a USB; when I plug them in using 3.3

they have the light for about half a second and then shut off.



If I boot with "hw.ioapic_enable=0" I am able to use both the NIC and USB drives.



Here is a verbose dmesg:



Copyright (c) 2003-2012 The DragonFly Project.

Copyright (c) 1992-2003 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

Slab ZoneSize set to 128KB

Leaving critical section, allowing interrupts

ACPI SDT: RSDP not in EBDA

ACPI SDT: RSDP in BIOS mem

ACPI FADT: SCI irq 9, conform/conform

DragonFly v3.3.0.506.gaad8a0-DEVELOPMENT #0: Tue Oct 30 19:01:13 UTC 2012

root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC

Calibrating clock(s) ... TSC clock: 2094746661 Hz, i8254 clock: 1193180 Hz

CLK_USE_I8254_CALIBRATION not specified - using default frequency

CLK_USE_TSC_CALIBRATION not specified - using old calibration method

CPU: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz (2094.77-MHz K8-class CPU)

Origin = "GenuineIntel" Id = 0x1067a Stepping = 10

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>

AMD Features=0x20100800<SYSCALL,NX,LM>

AMD Features2=0x1<LAHF>

real memory = 2072271872 (1976 MB)

Physical memory chunk(s):

0x00020000 - 0x0007ffff, 393216 bytes (96 pages)

0x00100000 - 0x001fffff, 1048576 bytes (256 pages)

0x035a0000 - 0x76b3ffff, 1935278080 bytes (472480 pages)

0x76b60000 - 0x7795ffff, 14680064 bytes (3584 pages)

0x77980000 - 0x7a0fffff, 41418752 bytes (10112 pages)

0x7a320000 - 0x7ba5ffff, 24379392 bytes (5952 pages)

avail memory = 1894744064 (1806 MB)

ACPI MADT: LAPIC address 0xfee00000, flags 0x1

ACPI MADT: BSP apic id 0

ACPI MADT: cpu id 0, apic id 0

ACPI MADT: cpu id 1, apic id 1

lapic: divisor index 0, frequency 99750420 Hz

SMP: CPU0 apic_initialize():

lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff

SMP: Waiting APs LAPIC initialization

SMP: CPU1 apic_initialize():

lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

ACPI MADT: warning invalid intsrc irq 9 trig, level

ACPI MADT: IOAPIC addr 0xfec00000, apic id 1, gsi base 0

ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high

ACPI MADT: SCI irq 9, first test level/high

IOAPIC: idx 0, apic id 2, gsi base 0, npin 24

IOAPIC: irq 1, gsi 1 -> cpu0 (fixed)

IOAPIC: irq 1 -> gsi 1 edge/high

IOAPIC: irq 0, gsi 2 -> cpu0 (0)

IOAPIC: irq 0 -> gsi 2 edge/high

IOAPIC: irq 3, gsi 3 -> cpu0 (fixed)

IOAPIC: irq 3 -> gsi 3 edge/high

IOAPIC: irq 4, gsi 4 -> cpu0 (fixed)

IOAPIC: irq 4 -> gsi 4 edge/high

IOAPIC: irq 5, gsi 5 -> cpu0 (fixed)

IOAPIC: irq 5 -> gsi 5 edge/high

IOAPIC: irq 6, gsi 6 -> cpu0 (fixed)

IOAPIC: irq 6 -> gsi 6 edge/high

IOAPIC: irq 7, gsi 7 -> cpu0 (fixed)

IOAPIC: irq 7 -> gsi 7 edge/high

IOAPIC: irq 8, gsi 8 -> cpu0 (fixed)

IOAPIC: irq 8 -> gsi 8 edge/high

IOAPIC: irq 9, gsi 9 -> cpu0 (sci)

IOAPIC: irq 9 -> gsi 9 edge/high

IOAPIC: irq 10, gsi 10 -> cpu0 (fixed)

IOAPIC: irq 10 -> gsi 10 edge/high

IOAPIC: irq 11, gsi 11 -> cpu0 (fixed)

IOAPIC: irq 11 -> gsi 11 edge/high

IOAPIC: irq 12, gsi 12 -> cpu0 (fixed)

IOAPIC: irq 12 -> gsi 12 edge/high

IOAPIC: irq 13, gsi 13 -> cpu0 (fixed)

IOAPIC: irq 13 -> gsi 13 edge/high

IOAPIC: irq 14, gsi 14 -> cpu0 (fixed)

IOAPIC: irq 14 -> gsi 14 edge/high

IOAPIC: irq 15, gsi 15 -> cpu0 (fixed)

IOAPIC: irq 15 -> gsi 15 edge/high

IOAPIC: irq 16, gsi 16 -> cpu0 (fixed)

IOAPIC: irq 16 -> gsi 16 level/low

IOAPIC: irq 17, gsi 17 -> cpu0 (fixed)

IOAPIC: irq 17 -> gsi 17 level/low

IOAPIC: irq 18, gsi 18 -> cpu0 (fixed)

IOAPIC: irq 18 -> gsi 18 level/low

IOAPIC: irq 19, gsi 19 -> cpu0 (fixed)

IOAPIC: irq 19 -> gsi 19 level/low

IOAPIC: irq 20, gsi 20 -> cpu0 (fixed)

IOAPIC: irq 20 -> gsi 20 level/low

IOAPIC: irq 21, gsi 21 -> cpu0 (fixed)

IOAPIC: irq 21 -> gsi 21 level/low

IOAPIC: irq 22, gsi 22 -> cpu0 (fixed)

IOAPIC: irq 22 -> gsi 22 level/low

IOAPIC: irq 23, gsi 23 -> cpu0 (fixed)

IOAPIC: irq 23 -> gsi 23 level/low

IOAPIC: cpu0 irq 2 reserved

IOAPIC: cpu1 irq 0 reserved

IOAPIC: cpu1 irq 1 reserved

IOAPIC: cpu1 irq 2 reserved

IOAPIC: cpu1 irq 3 reserved

IOAPIC: cpu1 irq 4 reserved

IOAPIC: cpu1 irq 5 reserved

IOAPIC: cpu1 irq 6 reserved

IOAPIC: cpu1 irq 7 reserved

IOAPIC: cpu1 irq 8 reserved

IOAPIC: cpu1 irq 9 reserved

IOAPIC: cpu1 irq 10 reserved

IOAPIC: cpu1 irq 11 reserved

IOAPIC: cpu1 irq 12 reserved

IOAPIC: cpu1 irq 13 reserved

IOAPIC: cpu1 irq 14 reserved

IOAPIC: cpu1 irq 15 reserved

IOAPIC: legacy irq max 24

ELCR Found. ISA IRQs programmed as:

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

E E E E E E E E E E L L E E E E

Initialize MI interrupts

objcache: magazine cap [6, 134]

Finish MP startup

Active CPU Mask: 0000000000000003

ndepotmags=263 x mag_cap=134 for mbuf

ndepotmags=132 x mag_cap=134 for mbuf pkt hdr

ndepotmags=17 x mag_cap=134 for cluster mbuf

ndepotmags=8 x mag_cap=134 for jcluster mbuf

ndepotmags=9 x mag_cap=134 for mbuf + cluster

ndepotmags=6 x mag_cap=46 for mbuf pkt hdr + cluster

ndepotmags=6 x mag_cap=46 for mbuf + jcluster

ndepotmags=6 x mag_cap=22 for mbuf pkt hdr + jcluster

ndepotmags=6 x mag_cap=22 for sf_buf

ndepotmags=2 x mag_cap=6 for exec-args

Preloaded elf kernel "kernel" at 0xffffffff83008000.

Preloaded elf obj module "acpi.ko" at 0xffffffff83008550.

Preloaded elf obj module "ehci.ko" at 0xffffffff83008ee8.

link_elf_obj_obj: symbol atomic_swap_int undefined

KLD file acpi.ko - could not finalize loading

BITS within APICID: logical_CPU_bits: 0; core_bits: 1

CPU Topology: cores_per_chip: 2; threads_per_core: 1; chips_per_package: 1;

Start scheduler helpers on cpus:

cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpu0 cpu1

cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpu0 cpu1

Start scheduler helpers on cpus:

cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpu0 cpu1

cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpu0 cpu1

start dummy scheduler helpers on cpus: 0 1

ndepotmags=6 x mag_cap=6 for thread

ndepotmags=6 x mag_cap=22 for dsched-tdio-cache

ndepotmags=6 x mag_cap=22 for dsched-tdctx-cache

ndepotmags=6 x mag_cap=22 for dsched-diskctx-cache

ndepotmags=6 x mag_cap=6 for vmspace

ndepotmags=6 x mag_cap=22 for devfs-node-cache

ndepotmags=6 x mag_cap=22 for devfs-msg-cache

ndepotmags=6 x mag_cap=22 for devfs-dev-cache

ndepotmags=6 x mag_cap=22 for disk-msg-cache

FQ scheduler policy version 1.1 loaded

ndepotmags=6 x mag_cap=22 for pdict128

ndepotmags=6 x mag_cap=6 for devfs

wdog: In-kernel automatic watchdog reset enabled

ndepotmags=6 x mag_cap=22 for pdict32

ndepotmags=6 x mag_cap=22 for propdata

ndepotmags=6 x mag_cap=22 for pdict16

ndepotmags=6 x mag_cap=22 for propnmbr

ndepotmags=6 x mag_cap=22 for proparay

ndepotmags=6 x mag_cap=22 for propdict

ndepotmags=6 x mag_cap=22 for propstng

ndepotmags=6 x mag_cap=22 for devfs-rule-cache

wlan: <802.11 Link Layer>

ndepotmags=6 x mag_cap=22 for ata_request

ndepotmags=6 x mag_cap=22 for ata_composite

No policy for md0 specified, or policy not found

disk scheduler: set policy of md0 to noop

md0: Malloc disk

kbd: new array size 4

kbd1 at kbdmux0

ndepotmags=6 x mag_cap=22 for crypto op

ndepotmags=6 x mag_cap=22 for crypto desc

crypto: <crypto core>

md0: invalid primary partition table: no magic

hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2

hpt27xx: RocketRAID 27xx controller driver v1.0 (Oct 30 2012 19:00:45)

IOAPIC: rman cpu0 0 - 1

IOAPIC: rman cpu0 3 - 95

IOAPIC: rman cpu0 97 - 191

IOAPIC: rman cpu1 16 - 95

IOAPIC: rman cpu1 97 - 191

cryptosoft0.nexus0.root0

cryptosoft0: <software crypto> [tentative] on motherboard

crypto: assign cryptosoft0 driver id 0, flags 234881024

crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0

cryptosoft0: <software crypto> [attached!] on motherboard

pcib0.legacy0.nexus0.root0

pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard

pci0.pcib0.legacy0.nexus0.root0

pci0: <PCI bus> [tentative] on pcib0

pci0: domain=0, physical bus=0

found-> vendor=0x8086, dev=0x2a40, revid=0x07

domain=0, bus=0, slot=0, func=0

class=06-00-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x2a42, revid=0x07

domain=0, bus=0, slot=2, func=0

class=03-00-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

powerspec 3 supports D0 D3 current D0

MSI supports 1 message

map[10]: type Memory, range 64, base 0x90000000, size 22, enabled

map[18]: type Prefetchable Memory, range 64, base 0x80000000, size 28, enabled

map[20]: type I/O Port, range 32, base 0x70f0, size 3, enabled

MPTABLE: fixed interrupt routing for 0:2 INTA

MPTABLE: 0:2 INTA routed to irq 10

IOAPIC: irq 10, gsi 10 edge/high -> level/low

found-> vendor=0x8086, dev=0x2a43, revid=0x07

domain=0, bus=0, slot=2, func=1

class=03-80-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

powerspec 3 supports D0 D3 current D0

map[10]: type Memory, range 64, base 0x90400000, size 20, enabled

found-> vendor=0x8086, dev=0x2937, revid=0x03

domain=0, bus=0, slot=26, func=0

class=0c-03-00, hdrtype=0x00, mfdev=1

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

map[20]: type I/O Port, range 32, base 0x70c0, size 5, enabled

MPTABLE: fixed interrupt routing for 0:26 INTA

MPTABLE: 0:26 INTA routed to irq 10

found-> vendor=0x8086, dev=0x2938, revid=0x03

domain=0, bus=0, slot=26, func=1

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=11

map[20]: type I/O Port, range 32, base 0x70a0, size 5, enabled

MPTABLE: fixed interrupt routing for 0:26 INTB

MPTABLE: 0:26 INTB routed to irq 11

IOAPIC: irq 11, gsi 11 edge/high -> level/low

found-> vendor=0x8086, dev=0x2939, revid=0x03

domain=0, bus=0, slot=26, func=2

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=c, irq=10

map[20]: type I/O Port, range 32, base 0x7080, size 5, enabled

MPTABLE: fixed interrupt routing for 0:26 INTC

MPTABLE: 0:26 INTC routed to irq 10

found-> vendor=0x8086, dev=0x293c, revid=0x03

domain=0, bus=0, slot=26, func=7

class=0c-03-20, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=d, irq=10

powerspec 2 supports D0 D3 current D0

map[10]: type Memory, range 32, base 0x98904c00, size 10, enabled

MPTABLE: fixed interrupt routing for 0:26 INTD

MPTABLE: 0:26 INTD routed to irq 10

found-> vendor=0x8086, dev=0x293e, revid=0x03

domain=0, bus=0, slot=27, func=0

class=04-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=11

powerspec 2 supports D0 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.1 cap=0x0091[ROOTDEV]

map[10]: type Memory, range 64, base 0x98900000, size 14, enabled

MPTABLE: fixed interrupt routing for 0:27 INTA

MPTABLE: 0:27 INTA routed to irq 11

found-> vendor=0x8086, dev=0x2940, revid=0x03

domain=0, bus=0, slot=28, func=0

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0000a0e0[HOTPLUG]

MPTABLE: fixed interrupt routing for 0:28 INTA

MPTABLE: 0:28 INTA routed to irq 10

found-> vendor=0x8086, dev=0x2942, revid=0x03

domain=0, bus=0, slot=28, func=1

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=11

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0008a0e0[HOTPLUG]

MPTABLE: fixed interrupt routing for 0:28 INTB

MPTABLE: 0:28 INTB routed to irq 11

found-> vendor=0x8086, dev=0x2944, revid=0x03

domain=0, bus=0, slot=28, func=2

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=c, irq=10

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]

MPTABLE: fixed interrupt routing for 0:28 INTC

MPTABLE: 0:28 INTC routed to irq 10

found-> vendor=0x8086, dev=0x2948, revid=0x03

domain=0, bus=0, slot=28, func=4

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0020a0e0[HOTPLUG]

MPTABLE: fixed interrupt routing for 0:28 INTA

MPTABLE: 0:28 INTA routed to irq 10

found-> vendor=0x8086, dev=0x294a, revid=0x03

domain=0, bus=0, slot=28, func=5

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=11

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0028a0e0[HOTPLUG]

MPTABLE: fixed interrupt routing for 0:28 INTB

MPTABLE: 0:28 INTB routed to irq 11

found-> vendor=0x8086, dev=0x2934, revid=0x03

domain=0, bus=0, slot=29, func=0

class=0c-03-00, hdrtype=0x00, mfdev=1

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

map[20]: type I/O Port, range 32, base 0x7060, size 5, enabled

MPTABLE: fixed interrupt routing for 0:29 INTA

MPTABLE: 0:29 INTA routed to irq 10

found-> vendor=0x8086, dev=0x2935, revid=0x03

domain=0, bus=0, slot=29, func=1

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=10

map[20]: type I/O Port, range 32, base 0x7040, size 5, enabled

MPTABLE: fixed interrupt routing for 0:29 INTB

MPTABLE: 0:29 INTB routed to irq 10

found-> vendor=0x8086, dev=0x2936, revid=0x03

domain=0, bus=0, slot=29, func=2

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=c, irq=10

map[20]: type I/O Port, range 32, base 0x7020, size 5, enabled

MPTABLE: fixed interrupt routing for 0:29 INTC

MPTABLE: 0:29 INTC routed to irq 10

found-> vendor=0x8086, dev=0x293a, revid=0x03

domain=0, bus=0, slot=29, func=7

class=0c-03-20, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=d, irq=10

powerspec 2 supports D0 D3 current D0

map[10]: type Memory, range 32, base 0x98904800, size 10, enabled

MPTABLE: fixed interrupt routing for 0:29 INTD

MPTABLE: 0:29 INTD routed to irq 10

found-> vendor=0x8086, dev=0x2448, revid=0x93

domain=0, bus=0, slot=30, func=0

class=06-04-01, hdrtype=0x01, mfdev=0

cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x2919, revid=0x03

domain=0, bus=0, slot=31, func=0

class=06-01-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x2929, revid=0x03

domain=0, bus=0, slot=31, func=2

class=01-06-01, hdrtype=0x00, mfdev=0

cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=10

powerspec 3 supports D0 D3 current D0

MSI supports 16 messages

map[10]: type I/O Port, range 32, base 0x70e8, size 3, enabled

map[14]: type I/O Port, range 32, base 0x70fc, size 2, enabled

map[18]: type I/O Port, range 32, base 0x70e0, size 3, enabled

map[1c]: type I/O Port, range 32, base 0x70f8, size 2, enabled

map[20]: type I/O Port, range 32, base 0x7000, size 5, enabled

map[24]: type Memory, range 32, base 0x98904000, size 11, enabled

MPTABLE: fixed interrupt routing for 0:31 INTA

MPTABLE: 0:31 INTA routed to irq 10

vgapci0.pci0.pcib0.legacy0.nexus0.root0

vgapci0: <VGA-compatible display> [tentative] port 0x70f0-0x70f7 mem 0x80000000-0x8fffffff,0x90000000-0x903fffff irq 10 at device 2.0 on pci0

agp0.vgapci0.pci0.pcib0.legacy0.nexus0.root0

agp0: <Intel GM45 SVGA controller> [tentative] on vgapci0

vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0x80000000

vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0x90000000

agp0: detected 65532k stolen memory

agp0: aperture size is 256M

agp0: <Intel GM45 SVGA controller> [attached!] on vgapci0

vgapci0: <VGA-compatible display> [attached!] port 0x70f0-0x70f7 mem 0x80000000-0x8fffffff,0x90000000-0x903fffff irq 10 at device 2.0 on pci0

vgapci1.pci0.pcib0.legacy0.nexus0.root0

vgapci1: <VGA-compatible display> [tentative] mem 0x90400000-0x904fffff at device 2.1 on pci0

vgapci1: <VGA-compatible display> [attached!] mem 0x90400000-0x904fffff at device 2.1 on pci0

uhci0.pci0.pcib0.legacy0.nexus0.root0

uhci0: <Intel 82801I (ICH9) USB controller> [tentative] port 0x70c0-0x70df irq 10 at device 26.0 on pci0

uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x70c0

usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

usb0: <Intel 82801I (ICH9) USB controller> [tentative] on uhci0

usb0: USB revision 1.0

uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0

uhub0: 2 ports with 2 removable, self powered

uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0

usb0: <Intel 82801I (ICH9) USB controller> [attached!] on uhci0

uhci0: <Intel 82801I (ICH9) USB controller> [attached!] port 0x70c0-0x70df irq 10 at device 26.0 on pci0

uhci1.pci0.pcib0.legacy0.nexus0.root0

uhci1: <Intel 82801I (ICH9) USB controller> [tentative] port 0x70a0-0x70bf irq 11 at device 26.1 on pci0

uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x70a0

usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0

usb1: <Intel 82801I (ICH9) USB controller> [tentative] on uhci1

usb1: USB revision 1.0

uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0

uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1

uhub1: 2 ports with 2 removable, self powered

uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1

usb1: <Intel 82801I (ICH9) USB controller> [attached!] on uhci1

uhci1: <Intel 82801I (ICH9) USB controller> [attached!] port 0x70a0-0x70bf irq 11 at device 26.1 on pci0

uhci2.pci0.pcib0.legacy0.nexus0.root0

uhci2: <Intel 82801I (ICH9) USB controller> [tentative] port 0x7080-0x709f irq 10 at device 26.2 on pci0

uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7080

usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0

usb2: <Intel 82801I (ICH9) USB controller> [tentative] on uhci2

usb2: USB revision 1.0

uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0

uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2

uhub2: 2 ports with 2 removable, self powered

uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2

usb2: <Intel 82801I (ICH9) USB controller> [attached!] on uhci2

uhci2: <Intel 82801I (ICH9) USB controller> [attached!] port 0x7080-0x709f irq 10 at device 26.2 on pci0

ehci0.pci0.pcib0.legacy0.nexus0.root0

ehci0: <EHCI (generic) USB 2.0 controller> [tentative] mem 0x98904c00-0x98904fff irq 10 at device 26.7 on pci0

ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x98904c00

usb3: EHCI version 1.0

usb3: companion controllers, 2 ports each: usb0 usb1 usb2

usb3.ehci0.pci0.pcib0.legacy0.nexus0.root0

usb3: <EHCI (generic) USB 2.0 controller> [tentative] on ehci0

usb3: USB revision 2.0

uhub3.usb3.ehci0.pci0.pcib0.legacy0.nexus0.root0

uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb3

uhub3: 6 ports with 6 removable, self powered

uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb3

usb3: <EHCI (generic) USB 2.0 controller> [attached!] on ehci0

ehci0: <EHCI (generic) USB 2.0 controller> [attached!] mem 0x98904c00-0x98904fff irq 10 at device 26.7 on pci0

pci0: <multimedia, HDA> (vendor 0x8086, dev 0x293e) at device 27.0 irq 11

pcib1.pci0.pcib0.legacy0.nexus0.root0

pcib1: <MPTABLE PCI-PCI bridge> [tentative] irq 10 at device 28.0 on pci0

pcib1: domain 0

pcib1: secondary bus 1

pcib1: subordinate bus 1

pcib1: I/O decode 0xf000-0xfff

pcib1: memory decode 0x98800000-0x988fffff

pcib1: no prefetched decode

pcib1: Disable PCI Express hot-plug interrupts(0x0009)

pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0

pci1: <PCI bus> [tentative] on pcib1

pci1: domain=0, physical bus=1

pci1: <PCI bus> [attached!] on pcib1

pcib1: <MPTABLE PCI-PCI bridge> [attached!] irq 10 at device 28.0 on pci0

pcib2.pci0.pcib0.legacy0.nexus0.root0

pcib2: <MPTABLE PCI-PCI bridge> [tentative] irq 11 at device 28.1 on pci0

pcib2: domain 0

pcib2: secondary bus 2

pcib2: subordinate bus 2

pcib2: I/O decode 0xf000-0xfff

pcib2: memory decode 0x98700000-0x987fffff

pcib2: no prefetched decode

pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0

pci2: <PCI bus> [tentative] on pcib2

pci2: domain=0, physical bus=2

found-> vendor=0x8086, dev=0x4237, revid=0x00

domain=0, bus=2, slot=0, func=0

class=02-80-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=11

powerspec 3 supports D0 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.1 cap=0x0001[DEVICE]

map[10]: type Memory, range 64, base 0x98700000, size 13, enabled

pcib2: requested memory range 0x98700000-0x98701fff: good

MPTABLE: fixed interrupt routing for 0:28 INTA

MPTABLE: 0:28 INTA routed to irq 11

pcib2: slot 0 INTA is routed to irq 11

pci2: <network> (vendor 0x8086, dev 0x4237) at device 0.0 irq 11

pci2: <PCI bus> [attached!] on pcib2

pcib2: <MPTABLE PCI-PCI bridge> [attached!] irq 11 at device 28.1 on pci0

pcib3.pci0.pcib0.legacy0.nexus0.root0

pcib3: <MPTABLE PCI-PCI bridge> [tentative] irq 10 at device 28.2 on pci0

pcib3: domain 0

pcib3: secondary bus 3

pcib3: subordinate bus 67

pcib3: I/O decode 0x5000-0x6fff

pcib3: memory decode 0x94700000-0x986fffff

pcib3: no prefetched decode

pcib3: Disable PCI Express hot-plug interrupts(0x0009)

pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0

pci3: <PCI bus> [tentative] on pcib3

pci3: domain=0, physical bus=3

pci3: <PCI bus> [attached!] on pcib3

pcib3: <MPTABLE PCI-PCI bridge> [attached!] irq 10 at device 28.2 on pci0

pcib4.pci0.pcib0.legacy0.nexus0.root0

pcib4: <MPTABLE PCI-PCI bridge> [tentative] irq 10 at device 28.4 on pci0

pcib4: domain 0

pcib4: secondary bus 68

pcib4: subordinate bus 132

pcib4: I/O decode 0x3000-0x4fff

pcib4: memory decode 0x90700000-0x946fffff

pcib4: no prefetched decode

pcib4: Disable PCI Express hot-plug interrupts(0x0009)

pci68.pcib4.pci0.pcib0.legacy0.nexus0.root0

pci68: <PCI bus> [tentative] on pcib4

pci68: domain=0, physical bus=68

pci68: <PCI bus> [attached!] on pcib4

pcib4: <MPTABLE PCI-PCI bridge> [attached!] irq 10 at device 28.4 on pci0

pcib5.pci0.pcib0.legacy0.nexus0.root0

pcib5: <MPTABLE PCI-PCI bridge> [tentative] irq 11 at device 28.5 on pci0

pcib5: domain 0

pcib5: secondary bus 133

pcib5: subordinate bus 133

pcib5: I/O decode 0x2000-0x2fff

pcib5: memory decode 0x90600000-0x906fffff

pcib5: no prefetched decode

pcib5: Disable PCI Express hot-plug interrupts(0x0009)

pci133.pcib5.pci0.pcib0.legacy0.nexus0.root0

pci133: <PCI bus> [tentative] on pcib5

pci133: domain=0, physical bus=133

found-> vendor=0x11ab, dev=0x436c, revid=0x10

domain=0, bus=133, slot=0, func=0

class=02-00-00, hdrtype=0x00, mfdev=0

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=11

powerspec 3 supports D0 D1 D2 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.2 cap=0x0012[LEGDEV]

map[10]: type Memory, range 64, base 0x90600000, size 14, enabled

pcib5: requested memory range 0x90600000-0x90603fff: good

map[18]: type I/O Port, range 32, base 0x2000, size 8, enabled

pcib5: requested I/O range 0x2000-0x20ff: in range

MPTABLE: fixed interrupt routing for 0:28 INTA

MPTABLE: 0:28 INTA routed to irq 11

pcib5: slot 0 INTA is routed to irq 11

mskc0.pci133.pcib5.pci0.pcib0.legacy0.nexus0.root0

mskc0: <Marvell Yukon 88E8072 Gigabit Ethernet> [tentative] port 0x2000-0x20ff mem 0x90600000-0x90603fff irq 11 at device 0.0 on pci133

mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0x90600000

mskc0: RAM buffer size : 0KB

msk0.mskc0.pci133.pcib5.pci0.pcib0.legacy0.nexus0.root0

msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> [tentative] on mskc0

alignment check failed

alignment check failed

miibus0.msk0.mskc0.pci133.pcib5.pci0.pcib0.legacy0.nexus0.root0

miibus0: <MII bus> [tentative] on msk0

e1000phy0.miibus0.msk0.mskc0.pci133.pcib5.pci0.pcib0.legacy0.nexus0.root0

e1000phy0: <Marvell 88E1149 Gigabit PHY> [tentative] on miibus0

e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

e1000phy0: <Marvell 88E1149 Gigabit PHY> [attached!] on miibus0

miibus0: <MII bus> [attached!] on msk0

msk0: bpf attached

msk0: MAC address: 18:a9:05:cf:b6:67

msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> [attached!] on mskc0

mskc0: <Marvell Yukon 88E8072 Gigabit Ethernet> [attached!] port 0x2000-0x20ff mem 0x90600000-0x90603fff irq 11 at device 0.0 on pci133

pci133: <PCI bus> [attached!] on pcib5

pcib5: <MPTABLE PCI-PCI bridge> [attached!] irq 11 at device 28.5 on pci0

uhci3.pci0.pcib0.legacy0.nexus0.root0

uhci3: <Intel 82801I (ICH9) USB controller> [tentative] port 0x7060-0x707f irq 10 at device 29.0 on pci0

uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7060

usb4.uhci3.pci0.pcib0.legacy0.nexus0.root0

usb4: <Intel 82801I (ICH9) USB controller> [tentative] on uhci3

usb4: USB revision 1.0

uhub4.usb4.uhci3.pci0.pcib0.legacy0.nexus0.root0

uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4

uhub4: 2 ports with 2 removable, self powered

uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4

usb4: <Intel 82801I (ICH9) USB controller> [attached!] on uhci3

uhci3: <Intel 82801I (ICH9) USB controller> [attached!] port 0x7060-0x707f irq 10 at device 29.0 on pci0

uhci4.pci0.pcib0.legacy0.nexus0.root0

uhci4: <Intel 82801I (ICH9) USB controller> [tentative] port 0x7040-0x705f irq 10 at device 29.1 on pci0

uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7040

usb5.uhci4.pci0.pcib0.legacy0.nexus0.root0

usb5: <Intel 82801I (ICH9) USB controller> [tentative] on uhci4

usb5: USB revision 1.0

uhub5.usb5.uhci4.pci0.pcib0.legacy0.nexus0.root0

uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5

uhub5: 2 ports with 2 removable, self powered

uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5

usb5: <Intel 82801I (ICH9) USB controller> [attached!] on uhci4

uhci4: <Intel 82801I (ICH9) USB controller> [attached!] port 0x7040-0x705f irq 10 at device 29.1 on pci0

uhci5.pci0.pcib0.legacy0.nexus0.root0

uhci5: <Intel 82801I (ICH9) USB controller> [tentative] port 0x7020-0x703f irq 10 at device 29.2 on pci0

uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x7020

usb6.uhci5.pci0.pcib0.legacy0.nexus0.root0

usb6: <Intel 82801I (ICH9) USB controller> [tentative] on uhci5

usb6: USB revision 1.0

uhub6.usb6.uhci5.pci0.pcib0.legacy0.nexus0.root0

uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb6

uhub6: 2 ports with 2 removable, self powered

uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb6

usb6: <Intel 82801I (ICH9) USB controller> [attached!] on uhci5

uhci5: <Intel 82801I (ICH9) USB controller> [attached!] port 0x7020-0x703f irq 10 at device 29.2 on pci0

ehci1.pci0.pcib0.legacy0.nexus0.root0

ehci1: <EHCI (generic) USB 2.0 controller> [tentative] mem 0x98904800-0x98904bff irq 10 at device 29.7 on pci0

ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0x98904800

usb7: EHCI version 1.0

usb7: companion controllers, 2 ports each: usb4 usb5 usb6

usb7.ehci1.pci0.pcib0.legacy0.nexus0.root0

usb7: <EHCI (generic) USB 2.0 controller> [tentative] on ehci1

usb7: USB revision 2.0

uhub7.usb7.ehci1.pci0.pcib0.legacy0.nexus0.root0

uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb7

uhub7: 6 ports with 6 removable, self powered

uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb7

usb7: <EHCI (generic) USB 2.0 controller> [attached!] on ehci1

ehci1: <EHCI (generic) USB 2.0 controller> [attached!] mem 0x98904800-0x98904bff irq 10 at device 29.7 on pci0

pcib6.pci0.pcib0.legacy0.nexus0.root0

pcib6: <MPTABLE PCI-PCI bridge> [tentative] at device 30.0 on pci0

pcib6: domain 0

pcib6: secondary bus 134

pcib6: subordinate bus 134

pcib6: I/O decode 0xf000-0xfff

pcib6: memory decode 0x90500000-0x905fffff

pcib6: no prefetched decode

pcib6: Subtractively decoded bridge.

pci134.pcib6.pci0.pcib0.legacy0.nexus0.root0

pci134: <PCI bus> [tentative] on pcib6

pci134: domain=0, physical bus=134

pci134: <PCI bus> [attached!] on pcib6

pcib6: <MPTABLE PCI-PCI bridge> [attached!] at device 30.0 on pci0

isab0.pci0.pcib0.legacy0.nexus0.root0

isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0

isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

isa0: <ISA bus> [tentative] on isab0

isa0: <ISA bus> [attached!] on isab0

isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0

ahci0.pci0.pcib0.legacy0.nexus0.root0

ahci0: <AHCI-PCI-SATA> [tentative] port 0x7000-0x701f,0x70f8-0x70fb,0x70e0-0x70e7,0x70fc-0x70ff,0x70e8-0x70ef mem 0x98904000-0x989047ff irq 10 at device 31.2 on pci0

ahci0: attempting to allocate 1 MSI vector (16 supported)

alloc MSI intr 24 on cpu0

ahci0: using IRQ 24 on cpu0 for MSI

ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0x98904000

ahci0: Intel hocus pocus

ahci0: AHCI 1.2 capabilities 0xef20ffc3<S64A,NCQ,SSNTF,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS,EMS>, 4 ports, 32 tags/port, gen 2 (3Gbps)

ahci0.0: Caps 4<POD>

ahci0.1: Caps 4<POD>

ahci0.5: Caps 40004<HPCP,POD>

ahci0.1: START HARDRESET

ahci0.0: START HARDRESET

map MSI intr 24 on cpu0

ahci0.5: START HARDRESET

ahci0.0: END HARDRESET 0

ahci0.1: END HARDRESET 0

ahci0.0: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>

ahci0.1: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>

ahci0.1: sig eb140101

ahci0.0: sig 00000101

ahci0.1: END SOFTRESET

ahci0.0: END SOFTRESET

ahci0.0: Found DISK "ST9250410AS 0006HPM1" serial="5VG1L845"

ahci0.0: tags=32/32 satacap=0d06 satafea=004c NCQ=YES capacity=238475.17MB

ahci0.0: f85=3069 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen

ahci0.0: Set dummy xfer mode to 45

(probe0:ahci0:0:1:0): error 22

(probe0:ahci0:0:1:0): Unretryable Error

(probe0:ahci0:0:2:0): error 22

(probe0:ahci0:0:2:0): Unretryable Error

(probe0:ahci0:0:3:0): error 22

(probe0:ahci0:0:3:0): Unretryable Error

(probe0:ahci0:0:4:0): error 22

(probe0:ahci0:0:4:0): Unretryable Error

(probe0:ahci0:0:5:0): error 22

(probe0:ahci0:0:5:0): Unretryable Error

(probe0:ahci0:0:6:0): error 22

(probe0:ahci0:0:6:0): Unretryable Error

(probe0:ahci0:0:7:0): error 22

(probe0:ahci0:0:7:0): Unretryable Error

(probe0:ahci0:0:8:0): error 22

(probe0:ahci0:0:8:0): Unretryable Error

(probe0:ahci0:0:9:0): error 22

(probe0:ahci0:0:9:0): Unretryable Error

(probe0:ahci0:0:10:0): error 22

(probe0:ahci0:0:10:0): Unretryable Error

(probe0:ahci0:0:11:0): error 22

(probe0:ahci0:0:11:0): Unretryable Error

(probe0:ahci0:0:12:0): error 22

(probe0:ahci0:0:12:0): Unretryable Error

(probe0:ahci0:0:13:0): error 22

(probe0:ahci0:0:13:0): Unretryable Error

(probe0:ahci0:0:14:0): error 22

(probe0:ahci0:0:14:0): Unretryable Error

ahci0.1: Found ATAPI "hp DVDRAM GT20L DC05" serial="M3Z9AM20223"

ahci0.1: tags=0/32 satacap=0402 satafea=0068 NCQ=NO capacity=1.00MB

ahci0.1: f85=4210 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp

ahci0.1: Set dummy xfer mode to 45

ahci0.1: TFES slot 5 ci_saved = 00000020

ahci0.1: Copying rfis slot 5

ahci0.1: Shortening sense request

(probe0:ahci0:1:0:0): Retrying Command

(probe0:ahci0:1:0:0): error 22

(probe0:ahci0:1:0:0): Unretryable Error

ahci0.1: TFES slot 7 ci_saved = 00000080

ahci0.1: Copying rfis slot 7

(probe0:ahci0:1:1:0): error 22

(probe0:ahci0:1:1:0): Unretryable Error

(probe0:ahci0:1:2:0): error 22

(probe0:ahci0:1:2:0): Unretryable Error

(probe0:ahci0:1:3:0): error 22

(probe0:ahci0:1:3:0): Unretryable Error

(probe0:ahci0:1:4:0): error 22

(probe0:ahci0:1:4:0): Unretryable Error

(probe0:ahci0:1:5:0): error 22

(probe0:ahci0:1:5:0): Unretryable Error

(probe0:ahci0:1:6:0): error 22

(probe0:ahci0:1:6:0): Unretryable Error

(probe0:ahci0:1:7:0): error 22

(probe0:ahci0:1:7:0): Unretryable Error

(probe0:ahci0:1:8:0): error 22

(probe0:ahci0:1:8:0): Unretryable Error

(probe0:ahci0:1:9:0): error 22

(probe0:ahci0:1:9:0): Unretryable Error

(probe0:ahci0:1:10:0): error 22

(probe0:ahci0:1:10:0): Unretryable Error

(probe0:ahci0:1:11:0): error 22

(probe0:ahci0:1:11:0): Unretryable Error

(probe0:ahci0:1:12:0): error 22

(probe0:ahci0:1:12:0): Unretryable Error

(probe0:ahci0:1:13:0): error 22

(probe0:ahci0:1:13:0): Unretryable Error

(probe0:ahci0:1:14:0): error 22

(probe0:ahci0:1:14:0): Unretryable Error

ahci0.5: Port appears to be unplugged

ahci0.5: No device detected

ahci0.5: END HARDRESET 19

(probe0:ahci0:5:0:0): error 22

(probe0:ahci0:5:0:0): Unretryable Error

(probe0:ahci0:5:1:0): error 22

(probe0:ahci0:5:1:0): Unretryable Error

(probe0:ahci0:5:2:0): error 22

(probe0:ahci0:5:2:0): Unretryable Error

(probe0:ahci0:5:3:0): error 22

(probe0:ahci0:5:3:0): Unretryable Error

(probe0:ahci0:5:4:0): error 22

(probe0:ahci0:5:4:0): Unretryable Error

(probe0:ahci0:5:5:0): error 22

(probe0:ahci0:5:5:0): Unretryable Error

(probe0:ahci0:5:6:0): error 22

(probe0:ahci0:5:6:0): Unretryable Error

(probe0:ahci0:5:7:0): error 22

(probe0:ahci0:5:7:0): Unretryable Error

(probe0:ahci0:5:8:0): error 22

(probe0:ahci0:5:8:0): Unretryable Error

(probe0:ahci0:5:9:0): error 22

(probe0:ahci0:5:9:0): Unretryable Error

(probe0:ahci0:5:10:0): error 22

(probe0:ahci0:5:10:0): Unretryable Error

(probe0:ahci0:5:11:0): error 22

(probe0:ahci0:5:11:0): Unretryable Error

(probe0:ahci0:5:12:0): error 22

(probe0:ahci0:5:12:0): Unretryable Error

(probe0:ahci0:5:13:0): error 22

(probe0:ahci0:5:13:0): Unretryable Error

(probe0:ahci0:5:14:0): error 22

(probe0:ahci0:5:14:0): Unretryable Error

ahci0: <AHCI-PCI-SATA> [attached!] port 0x7000-0x701f,0x70f8-0x70fb,0x70e0-0x70e7,0x70fc-0x70ff,0x70e8-0x70ef mem 0x98904000-0x989047ff irq 24,10 at device 31.2 on pci0

pci0: <PCI bus> [attached!] on pcib0

pcib0: <MPTABLE Host-PCI bridge> [attached!] pcibus 0 on motherboard

Trying Read_Port at 203

Trying Read_Port at 243

Trying Read_Port at 283

Trying Read_Port at 2c3

Trying Read_Port at 303

Trying Read_Port at 343

Trying Read_Port at 383

Trying Read_Port at 3c3

ex_isa_identify()

isa_probe_children: disabling PnP devices

isa_probe_children: probing non-PnP devices

orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

orm0: <Option ROMs> [tentative] at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff on isa0

orm0: <Option ROMs> [attached!] at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff on isa0

adv0 [tentative] failed to probe on isa0

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x330

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x334

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x230

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x234

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x130

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x134

bt0 [tentative] failed to probe at port 0x134-0x137 on isa0

atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0

atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0

atkbd: the current kbd controller command byte 0067

atkbd: keyboard ID 0x41ab (2)

kbd0 at atkbd0

kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000

atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0

psm0: current command byte:0067

psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0

psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons

psm0: config:00000000, flags:00000008, packet size:3

psm0: syncmask:c0, syncbits:00

psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0

atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0

vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

fb0: vga0, vga, type:VGA (5), flags:0x7007f

fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000

fb0: init mode:24, bios mode:3, current mode:24

fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k

VGA parameters upon power-up

50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters in BIOS for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters to be used for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

sc0: <System console> [tentative] at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)

sc0: <System console> [attached!] at flags 0x100 on isa0

lm0 [tentative] failed to probe at port 0x290-0x297 on isa0

it0 [tentative] failed to probe at port 0x290-0x297 on isa0

it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0

it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0

it3 [tentative] failed to probe at port 0x228-0x22f on isa0

wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0

wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0

sio0: can't drain, serial port might not exist, disabling

sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

sio1: can't drain, serial port might not exist, disabling

sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0

sio2: not probed (disabled)

sio3: not probed (disabled)

ppc0: cannot reserve I/O port range

ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0

ed0: not probed (disabled)

lnc0: not probed (disabled)

cs0: not probed (disabled)

sn0: not probed (disabled)

isa_probe_children: probing PnP devices

ndepotmags=6 x mag_cap=22 for nameibufs

ndepotmags=6 x mag_cap=22 for NFS mount

ndepotmags=6 x mag_cap=22 for NFS node

ndepotmags=6 x mag_cap=46 for vnodes

lo0: bpf attached

ppp0: bpf attached

sl0: bpf attached

ndepotmags=6 x mag_cap=22 for UFS dirhash

faith0: bpf attached

hptrr: no controller detected.

hpt27xx: no controller detected.

CAM: Configuring bus: ahci0

CAM: Configuring bus: ahci0

CAM: Configuring bus: ahci0

CAM: Configuring 3 busses

(probe0:ahci0:0:1:0): error 22

(probe0:ahci0:0:1:0): Unretryable Error

(probe0:ahci0:0:2:0): error 22

(probe0:ahci0:0:2:0): Unretryable Error

(probe0:ahci0:0:3:0): error 22

(probe0:ahci0:0:3:0): Unretryable Error

(probe0:ahci0:0:4:0): error 22

(probe0:ahci0:0:4:0): Unretryable Error

(probe0:ahci0:0:5:0): error 22

(probe0:ahci0:0:5:0): Unretryable Error

(probe0:ahci0:0:6:0): error 22

(probe0:ahci0:0:6:0): Unretryable Error

(probe0:ahci0:0:7:0): error 22

(probe0:ahci0:0:7:0): Unretryable Error

(probe0:ahci0:0:8:0): error 22

(probe0:ahci0:0:8:0): Unretryable Error

(probe0:ahci0:0:9:0): error 22

(probe0:ahci0:0:9:0): Unretryable Error

(probe0:ahci0:0:10:0): error 22

(probe0:ahci0:0:10:0): Unretryable Error

(probe0:ahci0:0:11:0): error 22

(probe0:ahci0:0:11:0): Unretryable Error

(probe0:ahci0:0:12:0): error 22

(probe0:ahci0:0:12:0): Unretryable Error

(probe0:ahci0:0:13:0): error 22

(probe0:ahci0:0:13:0): Unretryable Error

(probe0:ahci0:0:14:0): error 22

(probe0:ahci0:0:14:0): Unretryable Error

CAM: Finished configuring bus: ahci0

(probe2:ahci0:5:0:0): error 22

(probe2:ahci0:5:0:0): Unretryable Error

(probe0:ahci0:5:1:0): error 22

(probe0:ahci0:5:1:0): Unretryable Error

(probe0:ahci0:5:2:0): error 22

(probe0:ahci0:5:2:0): Unretryable Error

(probe0:ahci0:5:3:0): error 22

(probe0:ahci0:5:3:0): Unretryable Error

(probe0:ahci0:5:4:0): error 22

(probe0:ahci0:5:4:0): Unretryable Error

(probe0:ahci0:5:5:0): error 22

(probe0:ahci0:5:5:0): Unretryable Error

(probe0:ahci0:5:6:0): error 22

(probe0:ahci0:5:6:0): Unretryable Error

(probe0:ahci0:5:7:0): error 22

(probe0:ahci0:5:7:0): Unretryable Error

(probe0:ahci0:5:8:0): error 22

(probe0:ahci0:5:8:0): Unretryable Error

(probe0:ahci0:5:9:0): error 22

(probe0:ahci0:5:9:0): Unretryable Error

(probe0:ahci0:5:10:0): error 22

(probe0:ahci0:5:10:0): Unretryable Error

(probe0:ahci0:5:11:0): error 22

(probe0:ahci0:5:11:0): Unretryable Error

(probe0:ahci0:5:12:0): error 22

(probe0:ahci0:5:12:0): Unretryable Error

(probe0:ahci0:5:13:0): error 22

(probe0:ahci0:5:13:0): Unretryable Error

(probe0:ahci0:5:14:0): error 22

(probe0:ahci0:5:14:0): Unretryable Error

CAM: Finished configuring bus: ahci0

ahci0.1: TFES slot 8 ci_saved = 00000100

ahci0.1: Copying rfis slot 8

ahci0.1: TFES slot 11 ci_saved = 00000800

ahci0.1: Copying rfis slot 11

ahci0.1: Shortening sense request

(probe1:ahci0:1:0:0): Retrying Command

(probe1:ahci0:1:0:0): error 22

(probe1:ahci0:1:0:0): Unretryable Error

ahci0.1: TFES slot 13 ci_saved = 00002000

ahci0.1: Copying rfis slot 13

(probe0:ahci0:1:1:0): error 22

(probe0:ahci0:1:1:0): Unretryable Error

(probe0:ahci0:1:2:0): error 22

(probe0:ahci0:1:2:0): Unretryable Error

(probe0:ahci0:1:3:0): error 22

(probe0:ahci0:1:3:0): Unretryable Error

(probe0:ahci0:1:4:0): error 22

(probe0:ahci0:1:4:0): Unretryable Error

(probe0:ahci0:1:5:0): error 22

(probe0:ahci0:1:5:0): Unretryable Error

(probe0:ahci0:1:6:0): error 22

(probe0:ahci0:1:6:0): Unretryable Error

(probe0:ahci0:1:7:0): error 22

(probe0:ahci0:1:7:0): Unretryable Error

(probe0:ahci0:1:8:0): error 22

(probe0:ahci0:1:8:0): Unretryable Error

(probe0:ahci0:1:9:0): error 22

(probe0:ahci0:1:9:0): Unretryable Error

(probe0:ahci0:1:10:0): error 22

(probe0:ahci0:1:10:0): Unretryable Error

(probe0:ahci0:1:11:0): error 22

(probe0:ahci0:1:11:0): Unretryable Error

(probe0:ahci0:1:12:0): error 22

(probe0:ahci0:1:12:0): Unretryable Error

(probe0:ahci0:1:13:0): error 22

(probe0:ahci0:1:13:0): Unretryable Error

(probe0:ahci0:1:14:0): error 22

(probe0:ahci0:1:14:0): Unretryable Error

CAM: Finished configuring bus: ahci0

CAM: finished configuring all busses

no B_DEVMAGIC (bootdev=0)

pass0 at ahci0 bus 0 target 0 lun 0

ATA PseudoRAID loaded

pass0: <SATA ST9250410AS 0006> Fixed Direct Access SCSI-4 device

pass0: Serial Number 5VG1L845

pass0: 300.000MB/s transfers

pass1 at ahci0 bus 1 target 0 lun 0

pass1: <hp DVDRAM GT20L DC05> Removable CD-ROM SCSI-0 device

pass1: 150.000MB/s transfers

sg0 at ahci0 bus 0 target 0 lun 0

sg0: <SATA ST9250410AS 0006> Fixed Direct Access SCSI-4 device

sg0: Serial Number 5VG1L845

sg0: 300.000MB/s transfers

sg1 at ahci0 bus 1 target 0 lun 0

sg1: <hp DVDRAM GT20L DC05> Removable CD-ROM SCSI-0 device

sg1: 150.000MB/s transfers

No policy for da0 specified, or policy not found

disk scheduler: set policy of da0 to noop

No policy for cd0 specified, or policy not found

disk scheduler: set policy of cd0 to noop

da0 at ahci0 bus 0 target 0 lun 0

da0: <SATA ST9250410AS 0006> Fixed Direct Access SCSI-4 device

da0: Serial Number 5VG1L845

da0: 300.000MB/s transfers

da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)

ahci0.1: TFES slot 14 ci_saved = 00004000

ahci0.1: Copying rfis slot 14

ahci0.1: Shortening sense request

(cd0:ahci0:1:0:0): Retrying Command

(cd0:ahci0:1:0:0): error 6

(cd0:ahci0:1:0:0): Unretryable Error

cd0 at ahci0 bus 1 target 0 lun 0

cd0: <hp DVDRAM GT20L DC05> Removable CD-ROM SCSI-0 device

cd0: 150.000MB/s transfers

cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

da0: type 0xa5, start 63, end = 488388095, size 488388033 : OK

Mounting root from hammer:serno/5VG1L845.s1d

HAMMER(ROOT) recovery check seqno=0010ca77

HAMMER(ROOT) recovery range 3000000001dea7b8-3000000001dea7b8

HAMMER(ROOT) recovery nexto 3000000001dea7b8 endseqno=0010ca78

HAMMER(ROOT) mounted clean, no recovery needed

DMA space used: 4208k, remaining available: 16384k

Mounting devfs

start_init: trying /sbin/init

Back