|
SMAP type=01 base=0000000000000000 len=000000000009fc00
|
|
SMAP type=02 base=000000000009fc00 len=0000000000000400
|
|
SMAP type=02 base=00000000000f0000 len=0000000000010000
|
|
SMAP type=01 base=0000000000100000 len=00000000df04e000
|
|
SMAP type=02 base=00000000df14e000 len=0000000000eb2000
|
|
SMAP type=02 base=00000000f8000000 len=0000000001000000
|
|
SMAP type=01 base=0000000100000000 len=000000001f000000
|
|
SMAP type=02 base=000000011f000000 len=0000000001000000
|
|
Copyright (c) 2003-2014 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
Slab ZoneSize set to 128KB
|
|
Leaving critical section, allowing interrupts
|
|
ACPI SDT: RSDP not in EBDA
|
|
ACPI SDT: RSDP in BIOS mem
|
|
ACPI FADT: SCI irq 9, conform/conform
|
|
mptable_pci_int_register: conflict PCI int entry for bus 0, dev 21, pin 1, IOAPIC 0.18 -> 0.21
|
|
DragonFly v4.0.3-RELEASE #27: Thu Jan 22 17:19:56 PST 2015
|
|
root@pkgbox64.dragonflybsd.org:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC
|
|
Calibrating clock(s) ...
|
|
TSC invariant clock: 999905456 Hz, i8254 clock: 1193069 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: AMD G-T40E Processor (1000.01-MHz K8-class CPU)
|
|
Origin = "AuthenticAMD" Id = 0x500f20 Stepping = 0
|
|
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
|
|
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
|
|
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
|
|
MONITOR/MWAIT Features=0x3<CST,INTBRK>
|
|
L1 2MB data TLB: 8 entries, fully associative
|
|
L1 2MB instruction TLB: 8 entries, fully associative
|
|
L1 4KB data TLB: 40 entries, fully associative
|
|
L1 4KB instruction TLB: 0 entries, 0-way associative
|
|
L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
|
|
L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
|
|
L2 2MB unified TLB: 0 entries, disabled/not present
|
|
L2 4KB data TLB: 512 entries, 4-way associative
|
|
L2 4KB instruction TLB: 512 entries, 4-way associative
|
|
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
|
|
npx mask: 0x0002ffff
|
|
real memory = 4262386688 (4064 MB)
|
|
Physical memory chunk(s):
|
|
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
|
|
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
|
|
0x02860000 - 0xdf13ffff, 3700293632 bytes (903392 pages)
|
|
0x100000000 - 0x11efdffff, 519962624 bytes (126944 pages)
|
|
avail memory = 3973832704 (3789 MB)
|
|
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
|
|
ACPI MADT: BSP apic id 0
|
|
ACPI MADT: cpu id 0, apic id 0
|
|
ACPI MADT: cpu id 1, apic id 1
|
|
LAPIC: AMD LINTEN on
|
|
lapic: divisor index 0, frequency 100002660 Hz
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: Waiting APs LAPIC initialization
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
ACPI MADT: warning invalid intsrc irq 9 trig, level
|
|
ACPI MADT: warning invalid intsrc irq 9 pola, low
|
|
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
|
|
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
|
|
ACPI MADT: SCI irq 9, first test level/low
|
|
IOAPIC: idx 0, apic id 2, gsi base 0, npin 24
|
|
IOAPIC: irq 1, gsi 1 -> cpu1 (auto)
|
|
IOAPIC: irq 1 -> gsi 1 edge/high
|
|
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
|
|
IOAPIC: irq 0 -> gsi 2 edge/high
|
|
IOAPIC: irq 3, gsi 3 -> cpu1 (auto)
|
|
IOAPIC: irq 3 -> gsi 3 edge/high
|
|
IOAPIC: irq 4, gsi 4 -> cpu0 (auto)
|
|
IOAPIC: irq 4 -> gsi 4 edge/high
|
|
IOAPIC: irq 5, gsi 5 -> cpu1 (auto)
|
|
IOAPIC: irq 5 -> gsi 5 edge/high
|
|
IOAPIC: irq 6, gsi 6 -> cpu0 (auto)
|
|
IOAPIC: irq 6 -> gsi 6 edge/high
|
|
IOAPIC: irq 7, gsi 7 -> cpu1 (auto)
|
|
IOAPIC: irq 7 -> gsi 7 edge/high
|
|
IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
|
|
IOAPIC: irq 8 -> gsi 8 edge/high
|
|
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
|
|
IOAPIC: irq 9 -> gsi 9 edge/high
|
|
IOAPIC: irq 10, gsi 10 -> cpu0 (auto)
|
|
IOAPIC: irq 10 -> gsi 10 edge/high
|
|
IOAPIC: irq 11, gsi 11 -> cpu1 (auto)
|
|
IOAPIC: irq 11 -> gsi 11 edge/high
|
|
IOAPIC: irq 12, gsi 12 -> cpu0 (auto)
|
|
IOAPIC: irq 12 -> gsi 12 edge/high
|
|
IOAPIC: irq 13, gsi 13 -> cpu1 (auto)
|
|
IOAPIC: irq 13 -> gsi 13 edge/high
|
|
IOAPIC: irq 14, gsi 14 -> cpu0 (auto)
|
|
IOAPIC: irq 14 -> gsi 14 edge/high
|
|
IOAPIC: irq 15, gsi 15 -> cpu1 (auto)
|
|
IOAPIC: irq 15 -> gsi 15 edge/high
|
|
IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
|
|
IOAPIC: irq 16 -> gsi 16 level/low
|
|
IOAPIC: irq 17, gsi 17 -> cpu1 (auto)
|
|
IOAPIC: irq 17 -> gsi 17 level/low
|
|
IOAPIC: irq 18, gsi 18 -> cpu0 (auto)
|
|
IOAPIC: irq 18 -> gsi 18 level/low
|
|
IOAPIC: irq 19, gsi 19 -> cpu1 (auto)
|
|
IOAPIC: irq 19 -> gsi 19 level/low
|
|
IOAPIC: irq 20, gsi 20 -> cpu0 (auto)
|
|
IOAPIC: irq 20 -> gsi 20 level/low
|
|
IOAPIC: irq 21, gsi 21 -> cpu1 (auto)
|
|
IOAPIC: irq 21 -> gsi 21 level/low
|
|
IOAPIC: irq 22, gsi 22 -> cpu0 (auto)
|
|
IOAPIC: irq 22 -> gsi 22 level/low
|
|
IOAPIC: irq 23, gsi 23 -> cpu1 (auto)
|
|
IOAPIC: irq 23 -> gsi 23 level/low
|
|
IOAPIC: cpu0 irq 1 reserved
|
|
IOAPIC: cpu0 irq 2 reserved
|
|
IOAPIC: cpu0 irq 3 reserved
|
|
IOAPIC: cpu0 irq 5 reserved
|
|
IOAPIC: cpu0 irq 7 reserved
|
|
IOAPIC: cpu0 irq 11 reserved
|
|
IOAPIC: cpu0 irq 13 reserved
|
|
IOAPIC: cpu0 irq 15 reserved
|
|
IOAPIC: cpu1 irq 0 reserved
|
|
IOAPIC: cpu1 irq 2 reserved
|
|
IOAPIC: cpu1 irq 4 reserved
|
|
IOAPIC: cpu1 irq 6 reserved
|
|
IOAPIC: cpu1 irq 8 reserved
|
|
IOAPIC: cpu1 irq 9 reserved
|
|
IOAPIC: cpu1 irq 10 reserved
|
|
IOAPIC: cpu1 irq 12 reserved
|
|
IOAPIC: cpu1 irq 14 reserved
|
|
IOAPIC: legacy irq max 24
|
|
ELCR Found. ISA IRQs programmed as:
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
E E E E E E E E E E L L E E E E
|
|
Initialize MI interrupts
|
|
MWAIT hints (0 C1 hints):
|
|
MWAIT deep hints:
|
|
objcache: magazine cap [6, 134]
|
|
Finish MP startup
|
|
Active CPU Mask: 0000000000000003
|
|
Preloaded elf kernel "kernel" at 0xffffffff822a7000.
|
|
Preloaded elf obj module "acpi.ko" at 0xffffffff822a7250.
|
|
Preloaded elf obj module "ehci.ko" at 0xffffffff822a78a8.
|
|
Preloaded elf obj module "xhci.ko" at 0xffffffff822a7e00.
|
|
Preloaded elf obj module "dm.ko" at 0xffffffff822a83d8.
|
|
Preloaded elf obj module "amdsbwd.ko" at 0xffffffff822a8a30.
|
|
Preloaded elf obj module "km.ko" at 0xffffffff822a8f90.
|
|
Bits within APICID: logical_CPU_bits: 0; core_bits: 1
|
|
CPU Topology: cores_per_chip: 2; threads_per_core: 1; chips_per_package: 1;
|
|
Start usched_dfly helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-1)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-1)
|
|
start dummy scheduler helpers on cpus: 0 1
|
|
Start usched_bsd4 helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-1)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-1)
|
|
FQ scheduler policy version 1.1 loaded
|
|
wdog: In-kernel automatic watchdog reset enabled
|
|
wlan: <802.11 Link Layer>
|
|
ath_dfs: WTF module
|
|
ath_rate: <SampleRate bit-rate selection algorithm>
|
|
kbd0 at kbdmux0
|
|
No policy for vn0 specified, or policy not found
|
|
disk scheduler: set policy of vn0 to noop
|
|
No policy for vn1 specified, or policy not found
|
|
disk scheduler: set policy of vn1 to noop
|
|
No policy for vn2 specified, or policy not found
|
|
disk scheduler: set policy of vn2 to noop
|
|
No policy for vn3 specified, or policy not found
|
|
disk scheduler: set policy of vn3 to noop
|
|
crypto: <crypto core>
|
|
No policy for md0 specified, or policy not found
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
md0: invalid primary partition table: no magic
|
|
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
|
|
hpt27xx: RocketRAID 27xx controller driver v1.0 (Jan 22 2015 17:19:06)
|
|
IOAPIC: rman cpu0 0 - 0
|
|
IOAPIC: rman cpu0 4 - 4
|
|
IOAPIC: rman cpu0 6 - 6
|
|
IOAPIC: rman cpu0 8 - 10
|
|
IOAPIC: rman cpu0 12 - 12
|
|
IOAPIC: rman cpu0 14 - 14
|
|
IOAPIC: rman cpu0 16 - 95
|
|
IOAPIC: rman cpu0 97 - 191
|
|
IOAPIC: rman cpu1 1 - 1
|
|
IOAPIC: rman cpu1 3 - 3
|
|
IOAPIC: rman cpu1 5 - 5
|
|
IOAPIC: rman cpu1 7 - 7
|
|
IOAPIC: rman cpu1 11 - 11
|
|
IOAPIC: rman cpu1 13 - 13
|
|
IOAPIC: rman cpu1 15 - 95
|
|
IOAPIC: rman cpu1 97 - 191
|
|
ACPI: RSDP 0x00000000000F2B10 000014 (v00 CORE )
|
|
ACPI: RSDT 0x00000000DF162424 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: FACP 0x00000000DF164838 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: DSDT 0x00000000DF1624C8 00232B (v02 PCENG COREBOOT 00010001 INTL 20121114)
|
|
ACPI: FACS 0x00000000DF1647F8 000040
|
|
ACPI: SPCR 0x00000000DF16492C 000050 (v01 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: HPET 0x00000000DF164980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: APIC 0x00000000DF1649B8 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: HEST 0x00000000DF164A18 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
|
|
ACPI: SSDT 0x00000000DF164BB0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
|
|
ACPI: SSDT 0x00000000DF166240 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
|
|
ACPI: SSDT 0x00000000DF166550 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
|
|
cryptosoft0.nexus0.root0
|
|
cryptosoft0: <software crypto> [tentative] on motherboard
|
|
crypto: assign cryptosoft0 driver id 0, flags 234881024
|
|
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
|
|
cryptosoft0: <software crypto> [attached!] on motherboard
|
|
aesni0: No AESNI support.
|
|
padlock0: No ACE support.
|
|
rdrand0: No RdRand support.
|
|
acpi0.nexus0.root0
|
|
acpi0: <CORE COREBOOT> [tentative] on motherboard
|
|
ACPI: All ACPI Tables successfully acquired
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI testing level/low
|
|
IOAPIC: irq 9, gsi 9 edge/high -> level/low
|
|
ACPI FADT: SCI select level/low
|
|
ACPI: Executed 2 blocks of module-level executable AML code
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
ACPI timer looks BAD min = 4, max = 9, width = 5
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks BAD min = 4, max = 8, width = 4
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <32-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
|
|
acpi_timer0: <32-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
|
|
acpi_hpet0.acpi0.nexus0.root0
|
|
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: vend: 0x4353, rev: 0x10, num: 2, opts: legacy_route
|
|
acpi_hpet0: frequency 14318180
|
|
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
|
|
pci_link0: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link1: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link2: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link3: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link4: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link5: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 9
|
|
Validation 0 255 N 0 9
|
|
After Disable 0 255 N 0 9
|
|
pci_link6: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pci_link7: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
|
|
Validation 0 255 N 0 3 4 5 7 10 11 12 15
|
|
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
|
|
pcib0.acpi0.nexus0.root0
|
|
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff iomem 0xa0000-0xbffff on acpi0
|
|
pci0.pcib0.acpi0.nexus0.root0
|
|
pci0: <ACPI PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x1022, dev=0x1510, revid=0x00
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1512, revid=0x00
|
|
domain=0, bus=0, slot=4, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x00242580
|
|
pcib0: matched entry for 0.4.INTA
|
|
pcib0: slot 4 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x1022, dev=0x1513, revid=0x00
|
|
domain=0, bus=0, slot=5, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x002c2580
|
|
pcib0: matched entry for 0.5.INTA
|
|
pcib0: slot 5 INTA hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x1022, dev=0x1514, revid=0x00
|
|
domain=0, bus=0, slot=6, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x00342580
|
|
pcib0: matched entry for 0.6.INTA
|
|
pcib0: slot 6 INTA hardwired to GSI 18, IRQ 18
|
|
found-> vendor=0x1022, dev=0x1515, revid=0x00
|
|
domain=0, bus=0, slot=7, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x003c2580
|
|
pcib0: matched entry for 0.7.INTA
|
|
pcib0: slot 7 INTA hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x1002, dev=0x4391, revid=0x40
|
|
domain=0, bus=0, slot=17, func=0
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
map[10]: type I/O Port, range 32, base 0x4010, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0x4020, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0x4018, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0x4024, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0x4000, size 4, enabled
|
|
map[24]: type Memory, range 32, base 0xf7f04000, size 10, enabled
|
|
pcib0: matched entry for 0.17.INTA
|
|
pcib0: slot 17 INTA hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x1002, dev=0x4397, revid=0x00
|
|
domain=0, bus=0, slot=18, func=0
|
|
class=0c-03-10, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
map[10]: type Memory, range 32, base 0xf7f00000, size 12, enabled
|
|
pcib0: matched entry for 0.18.INTA
|
|
pcib0: slot 18 INTA hardwired to GSI 18, IRQ 18
|
|
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7f00000
|
|
found-> vendor=0x1002, dev=0x4396, revid=0x00
|
|
domain=0, bus=0, slot=18, func=2
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f04400, size 8, enabled
|
|
pcib0: matched entry for 0.18.INTB
|
|
pcib0: slot 18 INTB hardwired to GSI 17, IRQ 17
|
|
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf7f04400
|
|
found-> vendor=0x1002, dev=0x4397, revid=0x00
|
|
domain=0, bus=0, slot=19, func=0
|
|
class=0c-03-10, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
map[10]: type Memory, range 32, base 0xf7f01000, size 12, enabled
|
|
pcib0: matched entry for 0.19.INTA
|
|
pcib0: slot 19 INTA hardwired to GSI 18, IRQ 18
|
|
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7f01000
|
|
found-> vendor=0x1002, dev=0x4396, revid=0x00
|
|
domain=0, bus=0, slot=19, func=2
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f04500, size 8, enabled
|
|
pcib0: matched entry for 0.19.INTB
|
|
pcib0: slot 19 INTB hardwired to GSI 17, IRQ 17
|
|
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf7f04500
|
|
found-> vendor=0x1002, dev=0x4385, revid=0x42
|
|
domain=0, bus=0, slot=20, func=0
|
|
class=0c-05-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1002, dev=0x439d, revid=0x40
|
|
domain=0, bus=0, slot=20, func=3
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1002, dev=0x4384, revid=0x40
|
|
domain=0, bus=0, slot=20, func=4
|
|
class=06-04-01, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0023, statreg=0x02a0, cachelnsz=0 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1002, dev=0x4399, revid=0x00
|
|
domain=0, bus=0, slot=20, func=5
|
|
class=0c-03-10, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
map[10]: type Memory, range 32, base 0xf7f02000, size 12, enabled
|
|
pcib0: matched entry for 0.20.INTC
|
|
pcib0: slot 20 INTC hardwired to GSI 18, IRQ 18
|
|
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7f02000
|
|
found-> vendor=0x1002, dev=0x43a0, revid=0x00
|
|
domain=0, bus=0, slot=21, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=255
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x1002, dev=0x4397, revid=0x00
|
|
domain=0, bus=0, slot=22, func=0
|
|
class=0c-03-10, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=255
|
|
map[10]: type Memory, range 32, base 0xf7f03000, size 12, enabled
|
|
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7f03000
|
|
found-> vendor=0x1002, dev=0x4396, revid=0x00
|
|
domain=0, bus=0, slot=22, func=2
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=255
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f04600, size 8, enabled
|
|
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf7f04600
|
|
found-> vendor=0x1022, dev=0x1700, revid=0x43
|
|
domain=0, bus=0, slot=24, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1701, revid=0x00
|
|
domain=0, bus=0, slot=24, func=1
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1702, revid=0x00
|
|
domain=0, bus=0, slot=24, func=2
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1703, revid=0x00
|
|
domain=0, bus=0, slot=24, func=3
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1704, revid=0x00
|
|
domain=0, bus=0, slot=24, func=4
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1718, revid=0x00
|
|
domain=0, bus=0, slot=24, func=5
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1716, revid=0x00
|
|
domain=0, bus=0, slot=24, func=6
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x1022, dev=0x1719, revid=0x00
|
|
domain=0, bus=0, slot=24, func=7
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 4.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0x1000-0x1fff
|
|
pcib1: memory decode 0xf7900000-0xf79fffff
|
|
pcib1: prefetched decode 0xf7800000-0xf78fffff
|
|
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
found-> vendor=0x10ec, dev=0x8168, revid=0x06
|
|
domain=0, bus=1, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 4 messages in map 0x20
|
|
PCI Express ver.2 cap=0x0202[DEVICE]
|
|
map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
|
|
pcib1: requested I/O range 0x1000-0x10ff: in range
|
|
map[18]: type Memory, range 64, base 0xf7900000, size 12, enabled
|
|
pcib1: requested memory range 0xf7900000-0xf7900fff: good
|
|
map[20]: type Prefetchable Memory, range 64, base 0xf7800000, size 14, enabled
|
|
pcib1: requested memory range 0xf7800000-0xf7803fff: good
|
|
pcib1: matched entry for 1.0.INTA
|
|
pcib1: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
|
|
re0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0x1000-0x10ff mem 0xf7800000-0xf7803fff,0xf7900000-0xf7900fff irq 16 at device 0.0 on pci1
|
|
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf7900000
|
|
re0: Hardware rev. 0x2c000000; PCI-E 125MHz
|
|
miibus0.re0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on re0
|
|
rgephy0: rev: 4
|
|
rgephy0.miibus0.re0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [tentative] on miibus0
|
|
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on re0
|
|
re0: bpf attached
|
|
re0: MAC address: XX:XX:XX:XX:XX:XX
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0x1000-0x10ff mem 0xf7800000-0xf7803fff,0xf7900000-0xf7900fff irq 16 at device 0.0 on pci1
|
|
pci1: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 4.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 5.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0x2000-0x2fff
|
|
pcib2: memory decode 0xf7b00000-0xf7bfffff
|
|
pcib2: prefetched decode 0xf7a00000-0xf7afffff
|
|
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
found-> vendor=0x10ec, dev=0x8168, revid=0x06
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 4 messages in map 0x20
|
|
PCI Express ver.2 cap=0x0202[DEVICE]
|
|
map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled
|
|
pcib2: requested I/O range 0x2000-0x20ff: in range
|
|
map[18]: type Memory, range 64, base 0xf7b00000, size 12, enabled
|
|
pcib2: requested memory range 0xf7b00000-0xf7b00fff: good
|
|
map[20]: type Prefetchable Memory, range 64, base 0xf7a00000, size 14, enabled
|
|
pcib2: requested memory range 0xf7a00000-0xf7a03fff: good
|
|
pcib2: matched entry for 2.0.INTA
|
|
pcib2: slot 0 INTA hardwired to GSI 17, IRQ 17
|
|
re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000
|
|
re1.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
re1: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0x2000-0x20ff mem 0xf7a00000-0xf7a03fff,0xf7b00000-0xf7b00fff irq 17 at device 0.0 on pci2
|
|
re1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf7b00000
|
|
re1: Hardware rev. 0x2c000000; PCI-E 125MHz
|
|
miibus1.re1.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus1: <MII bus> [tentative] on re1
|
|
rgephy1: rev: 4
|
|
rgephy1.miibus1.re1.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
rgephy1: <8211B/RTL8169S/8110S media interface> [tentative] on miibus1
|
|
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
rgephy1: <8211B/RTL8169S/8110S media interface> [attached!] on miibus1
|
|
miibus1: <MII bus> [attached!] on re1
|
|
re1: bpf attached
|
|
re1: MAC address: XX:XX:XX:XX:XX:XX
|
|
re1: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0x2000-0x20ff mem 0xf7a00000-0xf7a03fff,0xf7b00000-0xf7b00fff irq 17 at device 0.0 on pci2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 5.0 on pci0
|
|
pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] irq 18 at device 6.0 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0x3000-0x3fff
|
|
pcib3: memory decode 0xf7d00000-0xf7dfffff
|
|
pcib3: prefetched decode 0xf7c00000-0xf7cfffff
|
|
pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
found-> vendor=0x10ec, dev=0x8168, revid=0x06
|
|
domain=0, bus=3, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 4 messages in map 0x20
|
|
PCI Express ver.2 cap=0x0202[DEVICE]
|
|
map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled
|
|
pcib3: requested I/O range 0x3000-0x30ff: in range
|
|
map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled
|
|
pcib3: requested memory range 0xf7d00000-0xf7d00fff: good
|
|
map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14, enabled
|
|
pcib3: requested memory range 0xf7c00000-0xf7c03fff: good
|
|
pcib3: matched entry for 3.0.INTA
|
|
pcib3: slot 0 INTA hardwired to GSI 18, IRQ 18
|
|
re2: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
|
|
re2.pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
re2: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0x3000-0x30ff mem 0xf7c00000-0xf7c03fff,0xf7d00000-0xf7d00fff irq 18 at device 0.0 on pci3
|
|
re2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf7d00000
|
|
re2: Hardware rev. 0x2c000000; PCI-E 125MHz
|
|
miibus2.re2.pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus2: <MII bus> [tentative] on re2
|
|
rgephy2: rev: 4
|
|
rgephy2.miibus2.re2.pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
rgephy2: <8211B/RTL8169S/8110S media interface> [tentative] on miibus2
|
|
rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
rgephy2: <8211B/RTL8169S/8110S media interface> [attached!] on miibus2
|
|
miibus2: <MII bus> [attached!] on re2
|
|
re2: bpf attached
|
|
re2: MAC address: XX:XX:XX:XX:XX:XX
|
|
re2: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0x3000-0x30ff mem 0xf7c00000-0xf7c03fff,0xf7d00000-0xf7d00fff irq 18 at device 0.0 on pci3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] irq 18 at device 6.0 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 19 at device 7.0 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0x0-0x0
|
|
pcib4: memory decode 0xf7e00000-0xf7efffff
|
|
pcib4: no prefetched decode
|
|
pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x168c, dev=0x002a, revid=0x01
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=02-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0002, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 2 supports D0 D1 D3 current D0
|
|
MSI supports 1 message
|
|
MSI-X supports 1 message in map 0x10
|
|
PCI Express ver.1 cap=0x0011[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xf7e00000, size 16, enabled
|
|
pcib4: requested memory range 0xf7e00000-0xf7e0ffff: good
|
|
pcib4: matched entry for 4.0.INTA
|
|
pcib4: slot 0 INTA hardwired to GSI 19, IRQ 19
|
|
ath0.pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
ath0: <Atheros 9280> [tentative] mem 0xf7e00000-0xf7e0ffff irq 19 at device 0.0 on pci4
|
|
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7e00000
|
|
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
|
|
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
|
|
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
|
|
ath0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
|
|
ath0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
|
|
ath0: AR9280 mac XXX.X RF5133 phy 13.0
|
|
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
|
|
ath0: Use hw queue 1 for WME_AC_BE traffic
|
|
ath0: Use hw queue 0 for WME_AC_BK traffic
|
|
ath0: Use hw queue 2 for WME_AC_VI traffic
|
|
ath0: Use hw queue 3 for WME_AC_VO traffic
|
|
ath0: Use hw queue 8 for CAB traffic
|
|
ath0: Use hw queue 9 for beacons
|
|
ath0: using multicast key search
|
|
ath0: <Atheros 9280> [attached!] mem 0xf7e00000-0xf7e0ffff irq 19 at device 0.0 on pci4
|
|
pci4: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 19 at device 7.0 on pci0
|
|
ahci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0x4000-0x400f,0x4024-0x4027,0x4018-0x401f,0x4020-0x4023,0x4010-0x4017 mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
|
|
ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf7f04000
|
|
ahci0: AHCI 1.2 cap 0xf332ff05<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SPM,PMD,SSC,PSC>, 6 ports, 32 tags/port, gen 3 (6Gbps)
|
|
ahci0.0: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.1: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.2: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.1: START HARDRESET
|
|
ahci0.3: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.4: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.3: START HARDRESET
|
|
ahci0.5: Caps 2006<MPSS,POD,SUD>
|
|
ahci0.0: START HARDRESET
|
|
ahci0.5: START HARDRESET
|
|
ahci0.2: START HARDRESET
|
|
ahci0.4: START HARDRESET
|
|
ahci0.1: Port appears to be unplugged
|
|
ahci0.3: Port appears to be unplugged
|
|
ahci0.5: Port appears to be unplugged
|
|
ahci0.2: Port appears to be unplugged
|
|
ahci0.4: Port appears to be unplugged
|
|
ahci0.1: No device detected
|
|
ahci0.3: No device detected
|
|
ahci0.5: No device detected
|
|
ahci0.2: No device detected
|
|
ahci0.4: No device detected
|
|
ahci0.1: END HARDRESET 19
|
|
ahci0.3: END HARDRESET 19
|
|
ahci0.2: END HARDRESET 19
|
|
ahci0.5: END HARDRESET 19
|
|
ahci0.4: END HARDRESET 19
|
|
ahci0.0: PMPROBE(2) No Port Multiplier was found.
|
|
ahci0.0: PMPROBE(2) No Port Multiplier was found.
|
|
ahci0.0: END HARDRESET 0
|
|
ahci0.0: START SOFTRESET e017<CR,FR,MPSS,FRE,POD,SUD,ST>
|
|
ahci0.0: sig 00000101
|
|
ahci0.0: END SOFTRESET
|
|
ahci0.0: Found SSD "ADATA SP310 2.3" serial="XXXXXXXXXXXX"
|
|
ahci0.0: tags=32/32 satacap=e70e satacap2=0086 satafea=014c NCQ=YES capacity=30533.83MB
|
|
ahci0.0: f85=7469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.0: Set dummy xfer mode to 45
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
(probe0:ahci0:1:0:0): error 22
|
|
(probe0:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
(probe0:ahci0:2:0:0): error 22
|
|
(probe0:ahci0:2:0:0): Unretryable Error
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
(probe0:ahci0:3:0:0): error 22
|
|
(probe0:ahci0:3:0:0): Unretryable Error
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
(probe0:ahci0:4:0:0): error 22
|
|
(probe0:ahci0:4:0:0): Unretryable Error
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
(probe0:ahci0:5:0:0): error 22
|
|
(probe0:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0x4000-0x400f,0x4024-0x4027,0x4018-0x401f,0x4020-0x4023,0x4010-0x4017 mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
|
|
ohci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
|
|
usbus0.ohci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus0: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] on ohci0
|
|
usbus0: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] on ohci0
|
|
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] mem 0xf7f00000-0xf7f00fff irq 18 at device 18.0 on pci0
|
|
ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
|
|
usbus0: 12Mbps Full Speed USB v1.0
|
|
ehci0: Dropped interrupts workaround enabled
|
|
usbus1: EHCI version 1.0
|
|
ugen0.1: <ATI> at usbus0
|
|
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
|
|
usbus1.ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] on ehci0
|
|
usbus1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] on ehci0
|
|
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] mem 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
|
|
ohci1.pci0.pcib0.acpi0.nexus0.root0
|
|
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
ugen1.1: <ATI> at usbus1
|
|
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
usbus2.ohci1.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus2: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] on ohci1
|
|
usbus2: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] on ohci1
|
|
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] mem 0xf7f01000-0xf7f01fff irq 18 at device 19.0 on pci0
|
|
ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
|
|
usbus2: 12Mbps Full Speed USB v1.0
|
|
ehci1: Dropped interrupts workaround enabled
|
|
usbus3: EHCI version 1.0
|
|
ugen2.1: <ATI> at usbus2
|
|
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
|
|
uhub0: 5 ports with 5 removable, self powered
|
|
usbus3.ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus3: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] on ehci1
|
|
usbus3: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] on ehci1
|
|
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] mem 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
|
|
pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 20.3 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 20.3 on pci0
|
|
pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib5: <ACPI PCI-PCI bridge> [tentative] at device 20.4 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0xf000-0xefff
|
|
pcib5: no prefetched decode
|
|
pcib5: Subtractively decoded bridge.
|
|
pcib5: could not get PCI interrupt routing table for \_SB_.PCI0.HPBR - AE_NOT_FOUND
|
|
pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pci5: <ACPI PCI bus> [tentative] on pcib5
|
|
pci5: domain=0, physical bus=5
|
|
pci5: <ACPI PCI bus> [attached!] on pcib5
|
|
pcib5: <ACPI PCI-PCI bridge> [attached!] at device 20.4 on pci0
|
|
ohci2.pci0.pcib0.acpi0.nexus0.root0
|
|
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
|
|
usbus3: 480Mbps High Speed USB v2.0
|
|
ugen3.1: <ATI> at usbus3
|
|
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
|
|
uhub2: 5 ports with 5 removable, self powered
|
|
usbus4.ohci2.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus4: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] on ohci2
|
|
usbus4: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] on ohci2
|
|
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] mem 0xf7f02000-0xf7f02fff irq 18 at device 20.5 on pci0
|
|
pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib6: <ACPI PCI-PCI bridge> [tentative] at device 21.0 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 6
|
|
pcib6: subordinate bus 6
|
|
pcib6: I/O decode 0x0-0x0
|
|
pcib6: no prefetched decode
|
|
pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci6: <ACPI PCI bus> [tentative] on pcib6
|
|
pci6: domain=0, physical bus=6
|
|
pci6: <ACPI PCI bus> [attached!] on pcib6
|
|
pcib6: <ACPI PCI-PCI bridge> [attached!] at device 21.0 on pci0
|
|
ohci3.pci0.pcib0.acpi0.nexus0.root0
|
|
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] mem 0xf7f03000-0xf7f03fff at device 22.0 on pci0
|
|
pcib0: matched entry for 0.22.INTA
|
|
pcib0: slot 22 INTA hardwired to GSI 18, IRQ 18
|
|
usbus4: 12Mbps Full Speed USB v1.0
|
|
ugen4.1: <ATI> at usbus4
|
|
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
|
|
usbus5.ohci3.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus5: <AMD SB7x0/SB8x0/SB9x0 USB controller> [tentative] on ohci3
|
|
usbus5: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] on ohci3
|
|
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> [attached!] mem 0xf7f03000-0xf7f03fff irq 18 at device 22.0 on pci0
|
|
ehci2.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] mem 0xf7f04600-0xf7f046ff at device 22.2 on pci0
|
|
pcib0: matched entry for 0.22.INTB
|
|
pcib0: slot 22 INTB hardwired to GSI 17, IRQ 17
|
|
usbus5: 12Mbps Full Speed USB v1.0
|
|
ehci2: Dropped interrupts workaround enabled
|
|
usbus6: EHCI version 1.0
|
|
ugen5.1: <ATI> at usbus5
|
|
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
usbus6.ehci2.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus6: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [tentative] on ehci2
|
|
usbus6: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] on ehci2
|
|
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> [attached!] mem 0xf7f04600-0xf7f046ff irq 17 at device 22.2 on pci0
|
|
km0.hostb4.pci0.pcib0.acpi0.nexus0.root0
|
|
km0: <AMD Family 14h temperature sensor> [tentative] on hostb4
|
|
km0: <AMD Family 14h temperature sensor> [attached!] on hostb4
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff iomem 0xa0000-0xbffff on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu0: _OSC failed, using _PDC
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
cpu_cst0: non-C3 0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: create pkg domain0, coord 0xfc
|
|
cpu_pst0: control reg 127 c0010062
|
|
cpu_pst0: status reg 127 0
|
|
cpu_pst0: freq 1000, pwr 1501, xlat 0, blat 0, cv 00000000, sv 00000000
|
|
cpu_pst0: freq 800, pwr 1244, xlat 0, blat 0, cv 00000001, sv 00000001
|
|
cpu_pst0: _PPC 0
|
|
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
|
|
cpu0: <ACPI CPU> [attached!] port 0x841 on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
cpu1: _OSC failed, using _PDC
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
cpu_cst1: non-C3 0
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1.cpu1.acpi0.nexus0.root0
|
|
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
|
|
cpu_pst1: control reg 127 c0010062
|
|
cpu_pst1: status reg 127 0
|
|
cpu_pst1: _PPC 0
|
|
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
|
|
cpu1: <ACPI CPU> [attached!] port 0x841 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ACPI: Enabled 6 GPEs in block 00 to 1F
|
|
acpi0: <CORE COREBOOT> [attached!] at irq 9 on motherboard
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
orm0: <Option ROM> [tentative] at iomem 0xee800-0xeffff on isa0
|
|
orm0: <Option ROM> [attached!] at iomem 0xee800-0xeffff on isa0
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
amdsbwd0: ResetStatus0 = 0xf9
|
|
amdsbwd0: ResetStatus1 = 0x0b
|
|
amdsbwd0: memory base address = 0xfec000f0
|
|
amdsbwd0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
amdsbwd0: <AMD SB8xx Watchdog Timer> [tentative] at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
|
|
amdsbwd0: timeout set to 30 ticks
|
|
amdsbwd0: timer enabled
|
|
wdog: Watchdog AMD southbridge registered, max period = 6553500s , period = 30s
|
|
amdsbwd0: <AMD SB8xx Watchdog Timer> [attached!] at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60,0x64 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
device_probe_and_attach: vga0 attach returned 6
|
|
sc0: no video adapter found.
|
|
sc0: <System console> [tentative] failed to probe at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0: wbsio_probe port 0x2e: Device ID 0xc4, Rev 0x52
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio0: configured irq 4 not in bitmap of probed irqs 0
|
|
sio0: irq maps: 0x1 0x1 0x1 0x1
|
|
sio0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
|
|
sio0: type 16550, console
|
|
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
|
|
sio1: configured irq 3 not in bitmap of probed irqs 0
|
|
sio1: irq maps: 0x1 0x1 0x1 0x1
|
|
sio1.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sio1 [tentative] at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio1: type 16550A
|
|
usbus6: 480Mbps High Speed USB v2.0
|
|
sio1 [attached!] at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio2: not probed (disabled)
|
|
sio3: not probed (disabled)
|
|
ppc0: cannot reserve I/O port range
|
|
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
ugen6.1: <ATI> at usbus6
|
|
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
|
|
cpu_cst: global Cx count 1
|
|
lo0: bpf attached
|
|
ppp0: bpf attached
|
|
sl0: bpf attached
|
|
faith0: bpf attached
|
|
hptrr: no controller detected.
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 6 busses
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
uhub5: (probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
4 ports with 4 removable, self powered
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe1:ahci0:1:0:0): error 22
|
|
(probe1:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe2:ahci0:2:0:0): error 22
|
|
(probe2:ahci0:2:0:0): Unretryable Error
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe3:ahci0:3:0:0): error 22
|
|
(probe3:ahci0:3:0:0): Unretryable Error
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe4:ahci0:4:0:0): error 22
|
|
(probe4:ahci0:4:0:0): Unretryable Error
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe5:ahci0:5:0:0): error 22
|
|
(probe5:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: finished configuring all busses
|
|
pass0 at ahci0 bus 0 target 0 lun 0
|
|
pass0: <SATA ADATA SP310 2.3> Fixed Direct Access SCSI-4 device
|
|
pass0: Serial Number XXXXXXXXXXXX
|
|
pass0: 600.000MB/s transfers
|
|
sg0 at ahci0 bus 0 target 0 lun 0
|
|
sg0: <SATA ADATA SP310 2.3> Fixed Direct Access SCSI-4 device
|
|
sg0: Serial Number XXXXXXXXXXXX
|
|
sg0: 600.000MB/s transfers
|
|
No policy for da0 specified, or policy not found
|
|
disk scheduler: set policy of da0 to noop
|
|
da0: si_iosize_max:131072
|
|
da0 at ahci0 bus 0 target 0 lun 0
|
|
da0: <SATA ADATA SP310 2.3> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number XXXXXXXXXXXX
|
|
da0: 600.000MB/s transfers
|
|
da0: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C)
|
|
da0: supports TRIM
|
|
da0: type 0xa6, start 64, end = 62524979, size 62524916 : OK
|
|
da0s4: cannot find label (fixlabel: raw partition offset != slice offset)
|
|
uhub1: 5 ports with 5 removable, self powered
|
|
uhub3: 5 ports with 5 removable, self powered
|
|
uhub6: 4 ports with 4 removable, self powered
|
|
ugen1.2: <vendor 0x090c> at usbus1
|
|
umass0: <vendor 0x090c Spaceloop 8GB, class 0/0, rev 2.00/11.00, addr 2> on usbus1
|
|
umass0:6:0:-1: Attached to scbus6
|
|
(probe8:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
|
|
No policy for da8 specified, or policy not found
|
|
disk scheduler: set policy of da8 to noop
|
|
da8: si_iosize_max:131072
|
|
sg8 at umass-sim0 bus 0 target 0 lun 0
|
|
sg8: < Spaceloop 8GB 1100> Removable Direct Access SCSI-0 device
|
|
sg8: Serial Number XXXXXXXXXXXXXXXX
|
|
sg8: 40.000MB/s transfers
|
|
pass8 at umass-sim0 bus 0 target 0 lun 0
|
|
pass8: < Spaceloop 8GB 1100> Removable Direct Access SCSI-0 device
|
|
pass8: Serial Number XXXXXXXXXXXXXXXX
|
|
pass8: 40.000MB/s transfers
|
|
da8 at umass-sim0 bus 0 target 0 lun 0
|
|
da8: < Spaceloop 8GB 1100> Removable Direct Access SCSI-0 device
|
|
da8: Serial Number XXXXXXXXXXXXXXXX
|
|
da8: 40.000MB/s transfers
|
|
da8: 7725MB (15820800 512 byte sectors: 255H 63S/T 984C)
|
|
da8: type 0xa5, start 63, end = 3887729, size 3887667 : OK
|
|
ugen6.2: <Generic> at usbus6
|
|
umass1: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
|
|
umass1:7:1:-1: Attached to scbus7
|
|
No policy for da9 specified, or policy not found
|
|
disk scheduler: set policy of da9 to noop
|
|
da9: si_iosize_max:131072
|
|
sg9 at umass-sim1 bus 1 target 0 lun 0
|
|
sg9: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
|
|
sg9: Serial Number XXXXXXXXXXXX
|
|
sg9: 40.000MB/s transfers
|
|
pass9 at umass-sim1 bus 1 target 0 lun 0
|
|
pass9: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
|
|
pass9: Serial Number XXXXXXXXXXXX
|
|
pass9: 40.000MB/s transfers
|
|
(da9:umass-sim1:1:0:0): error 6
|
|
(da9:umass-sim1:1:0:0): Unretryable Error
|
|
da9 at umass-sim1 bus 1 target 0 lun 0
|
|
da9: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
|
|
da9: Serial Number XXXXXXXXXXXX
|
|
da9: 40.000MB/s transfers
|
|
da9: Attempt to query device size failed: NOT READY, Medium not present
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
Device Mapper version 4.16.0 loaded
|
|
dm_target_error: Successfully initialized
|
|
dm_target_zero: Successfully initialized
|
|
Mounting root from ufs:da8s1a
|
|
DMA space used: 24156k, remaining available: 16384k
|
|
Mounting devfs
|