|
Copyright (c) 2003-2017 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
Slab ZoneSize set to 128KB
|
|
Leaving critical section, allowing interrupts
|
|
ACPI SDT: RSDP in kenv hint
|
|
ACPI FADT: SCI irq 9, conform/conform
|
|
DragonFly v4.9.0.242.gfa5c6-DEVELOPMENT #0: Fri May 12 12:28:22 UTC 2017
|
|
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
|
|
Calibrating clock(s) ...
|
|
TSC clock: 3191780912 Hz (Method A)
|
|
i8254 clock: 1193100 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
TSC invariant clock: 3192097515 Hz
|
|
CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.10-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x506e3 Stepping = 3
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x77fafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
|
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x121<LAHF,ABM,Prefetch>
|
|
Structured Extended Features=0x29c6fbb<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM,RDSEED,ADX,SMAP>
|
|
Thermal and PM Features=0x27f7<SENSOR,TURBO,ARAT,PLN,ECMD,PTM,HWP>
|
|
MONITOR/MWAIT Features=0x3<CST,INTBRK>
|
|
npx mask: 0x0000ffff
|
|
real memory = 8483803136 (8090 MB)
|
|
Physical memory chunk(s):
|
|
0x00020000 - 0x0003ffff, 131072 bytes (32 pages)
|
|
0x00060000 - 0x0007ffff, 131072 bytes (32 pages)
|
|
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
|
|
0x03120000 - 0x6883ffff, 1701969920 bytes (415520 pages)
|
|
0x688a0000 - 0x688bffff, 131072 bytes (32 pages)
|
|
0x690e0000 - 0x75b3ffff, 212205568 bytes (51808 pages)
|
|
0x100000000 - 0x2847dffff, 6517817344 bytes (1591264 pages)
|
|
avail memory = 7804596224 (7443 MB)
|
|
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
|
|
ACPI MADT: BSP apic id 0
|
|
ACPI MADT: cpu id 0, acpi id 1, apic id 0
|
|
ACPI MADT: cpu id 1, acpi id 2, apic id 2
|
|
ACPI MADT: cpu id 2, acpi id 3, apic id 4
|
|
ACPI MADT: cpu id 3, acpi id 4, apic id 6
|
|
lapic: divisor index 0, frequency 12000166 Hz
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
|
|
Bits within APICID: logical_CPU_bits: 1; core_bits: 3
|
|
CPU Topology: cores_per_chip: 4; threads_per_core: 1; chips_per_package: 1;
|
|
srat_probe: can't locate SRAT
|
|
SMP: Waiting APs LAPIC initialization
|
|
SMP: CPU3 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU2 apic_initialize():
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
ACPI MADT: warning invalid intsrc irq 9 trig, level
|
|
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
|
|
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
|
|
ACPI MADT: SCI irq 9, first test level/high
|
|
IOAPIC: idx 0, apic id 1, gsi base 0, npin 120
|
|
IOAPIC: irq 1, gsi 1 -> cpu1 (auto)
|
|
IOAPIC: irq 1 -> gsi 1 edge/high
|
|
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
|
|
IOAPIC: irq 0 -> gsi 2 edge/high
|
|
IOAPIC: irq 3, gsi 3 -> cpu3 (auto)
|
|
IOAPIC: irq 3 -> gsi 3 edge/high
|
|
IOAPIC: irq 4, gsi 4 -> cpu0 (auto)
|
|
IOAPIC: irq 4 -> gsi 4 edge/high
|
|
IOAPIC: irq 5, gsi 5 -> cpu1 (auto)
|
|
IOAPIC: irq 5 -> gsi 5 edge/high
|
|
IOAPIC: irq 6, gsi 6 -> cpu2 (auto)
|
|
IOAPIC: irq 6 -> gsi 6 edge/high
|
|
IOAPIC: irq 7, gsi 7 -> cpu3 (auto)
|
|
IOAPIC: irq 7 -> gsi 7 edge/high
|
|
IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
|
|
IOAPIC: irq 8 -> gsi 8 edge/high
|
|
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
|
|
IOAPIC: irq 9 -> gsi 9 edge/high
|
|
IOAPIC: irq 10, gsi 10 -> cpu2 (auto)
|
|
IOAPIC: irq 10 -> gsi 10 edge/high
|
|
IOAPIC: irq 11, gsi 11 -> cpu3 (auto)
|
|
IOAPIC: irq 11 -> gsi 11 edge/high
|
|
IOAPIC: irq 12, gsi 12 -> cpu0 (auto)
|
|
IOAPIC: irq 12 -> gsi 12 edge/high
|
|
IOAPIC: irq 13, gsi 13 -> cpu1 (auto)
|
|
IOAPIC: irq 13 -> gsi 13 edge/high
|
|
IOAPIC: irq 14, gsi 14 -> cpu2 (auto)
|
|
IOAPIC: irq 14 -> gsi 14 edge/high
|
|
IOAPIC: irq 15, gsi 15 -> cpu3 (auto)
|
|
IOAPIC: irq 15 -> gsi 15 edge/high
|
|
IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
|
|
IOAPIC: irq 16 -> gsi 16 level/low
|
|
IOAPIC: irq 17, gsi 17 -> cpu1 (auto)
|
|
IOAPIC: irq 17 -> gsi 17 level/low
|
|
IOAPIC: irq 18, gsi 18 -> cpu2 (auto)
|
|
IOAPIC: irq 18 -> gsi 18 level/low
|
|
IOAPIC: irq 19, gsi 19 -> cpu3 (auto)
|
|
IOAPIC: irq 19 -> gsi 19 level/low
|
|
IOAPIC: irq 20, gsi 20 -> cpu0 (auto)
|
|
IOAPIC: irq 20 -> gsi 20 level/low
|
|
IOAPIC: irq 21, gsi 21 -> cpu1 (auto)
|
|
IOAPIC: irq 21 -> gsi 21 level/low
|
|
IOAPIC: irq 22, gsi 22 -> cpu2 (auto)
|
|
IOAPIC: irq 22 -> gsi 22 level/low
|
|
IOAPIC: irq 23, gsi 23 -> cpu3 (auto)
|
|
IOAPIC: irq 23 -> gsi 23 level/low
|
|
IOAPIC: irq 24, gsi 24 -> cpu0 (auto)
|
|
IOAPIC: irq 24 -> gsi 24 level/low
|
|
IOAPIC: irq 25, gsi 25 -> cpu1 (auto)
|
|
IOAPIC: irq 25 -> gsi 25 level/low
|
|
IOAPIC: irq 26, gsi 26 -> cpu2 (auto)
|
|
IOAPIC: irq 26 -> gsi 26 level/low
|
|
IOAPIC: irq 27, gsi 27 -> cpu3 (auto)
|
|
IOAPIC: irq 27 -> gsi 27 level/low
|
|
IOAPIC: irq 28, gsi 28 -> cpu0 (auto)
|
|
IOAPIC: irq 28 -> gsi 28 level/low
|
|
IOAPIC: irq 29, gsi 29 -> cpu1 (auto)
|
|
IOAPIC: irq 29 -> gsi 29 level/low
|
|
IOAPIC: irq 30, gsi 30 -> cpu2 (auto)
|
|
IOAPIC: irq 30 -> gsi 30 level/low
|
|
IOAPIC: irq 31, gsi 31 -> cpu3 (auto)
|
|
IOAPIC: irq 31 -> gsi 31 level/low
|
|
IOAPIC: irq 32, gsi 32 -> cpu0 (auto)
|
|
IOAPIC: irq 32 -> gsi 32 level/low
|
|
IOAPIC: irq 33, gsi 33 -> cpu1 (auto)
|
|
IOAPIC: irq 33 -> gsi 33 level/low
|
|
IOAPIC: irq 34, gsi 34 -> cpu2 (auto)
|
|
IOAPIC: irq 34 -> gsi 34 level/low
|
|
IOAPIC: irq 35, gsi 35 -> cpu3 (auto)
|
|
IOAPIC: irq 35 -> gsi 35 level/low
|
|
IOAPIC: irq 36, gsi 36 -> cpu0 (auto)
|
|
IOAPIC: irq 36 -> gsi 36 level/low
|
|
IOAPIC: irq 37, gsi 37 -> cpu1 (auto)
|
|
IOAPIC: irq 37 -> gsi 37 level/low
|
|
IOAPIC: irq 38, gsi 38 -> cpu2 (auto)
|
|
IOAPIC: irq 38 -> gsi 38 level/low
|
|
IOAPIC: irq 39, gsi 39 -> cpu3 (auto)
|
|
IOAPIC: irq 39 -> gsi 39 level/low
|
|
IOAPIC: irq 40, gsi 40 -> cpu0 (auto)
|
|
IOAPIC: irq 40 -> gsi 40 level/low
|
|
IOAPIC: irq 41, gsi 41 -> cpu1 (auto)
|
|
IOAPIC: irq 41 -> gsi 41 level/low
|
|
IOAPIC: irq 42, gsi 42 -> cpu2 (auto)
|
|
IOAPIC: irq 42 -> gsi 42 level/low
|
|
IOAPIC: irq 43, gsi 43 -> cpu3 (auto)
|
|
IOAPIC: irq 43 -> gsi 43 level/low
|
|
IOAPIC: irq 44, gsi 44 -> cpu0 (auto)
|
|
IOAPIC: irq 44 -> gsi 44 level/low
|
|
IOAPIC: irq 45, gsi 45 -> cpu1 (auto)
|
|
IOAPIC: irq 45 -> gsi 45 level/low
|
|
IOAPIC: irq 46, gsi 46 -> cpu2 (auto)
|
|
IOAPIC: irq 46 -> gsi 46 level/low
|
|
IOAPIC: irq 47, gsi 47 -> cpu3 (auto)
|
|
IOAPIC: irq 47 -> gsi 47 level/low
|
|
IOAPIC: irq 48, gsi 48 -> cpu0 (auto)
|
|
IOAPIC: irq 48 -> gsi 48 level/low
|
|
IOAPIC: irq 49, gsi 49 -> cpu1 (auto)
|
|
IOAPIC: irq 49 -> gsi 49 level/low
|
|
IOAPIC: irq 50, gsi 50 -> cpu2 (auto)
|
|
IOAPIC: irq 50 -> gsi 50 level/low
|
|
IOAPIC: irq 51, gsi 51 -> cpu3 (auto)
|
|
IOAPIC: irq 51 -> gsi 51 level/low
|
|
IOAPIC: irq 52, gsi 52 -> cpu0 (auto)
|
|
IOAPIC: irq 52 -> gsi 52 level/low
|
|
IOAPIC: irq 53, gsi 53 -> cpu1 (auto)
|
|
IOAPIC: irq 53 -> gsi 53 level/low
|
|
IOAPIC: irq 54, gsi 54 -> cpu2 (auto)
|
|
IOAPIC: irq 54 -> gsi 54 level/low
|
|
IOAPIC: irq 55, gsi 55 -> cpu3 (auto)
|
|
IOAPIC: irq 55 -> gsi 55 level/low
|
|
IOAPIC: irq 56, gsi 56 -> cpu0 (auto)
|
|
IOAPIC: irq 56 -> gsi 56 level/low
|
|
IOAPIC: irq 57, gsi 57 -> cpu1 (auto)
|
|
IOAPIC: irq 57 -> gsi 57 level/low
|
|
IOAPIC: irq 58, gsi 58 -> cpu2 (auto)
|
|
IOAPIC: irq 58 -> gsi 58 level/low
|
|
IOAPIC: irq 59, gsi 59 -> cpu3 (auto)
|
|
IOAPIC: irq 59 -> gsi 59 level/low
|
|
IOAPIC: irq 60, gsi 60 -> cpu0 (auto)
|
|
IOAPIC: irq 60 -> gsi 60 level/low
|
|
IOAPIC: irq 61, gsi 61 -> cpu1 (auto)
|
|
IOAPIC: irq 61 -> gsi 61 level/low
|
|
IOAPIC: irq 62, gsi 62 -> cpu2 (auto)
|
|
IOAPIC: irq 62 -> gsi 62 level/low
|
|
IOAPIC: irq 63, gsi 63 -> cpu3 (auto)
|
|
IOAPIC: irq 63 -> gsi 63 level/low
|
|
IOAPIC: irq 64, gsi 64 -> cpu0 (auto)
|
|
IOAPIC: irq 64 -> gsi 64 level/low
|
|
IOAPIC: irq 65, gsi 65 -> cpu1 (auto)
|
|
IOAPIC: irq 65 -> gsi 65 level/low
|
|
IOAPIC: irq 66, gsi 66 -> cpu2 (auto)
|
|
IOAPIC: irq 66 -> gsi 66 level/low
|
|
IOAPIC: irq 67, gsi 67 -> cpu3 (auto)
|
|
IOAPIC: irq 67 -> gsi 67 level/low
|
|
IOAPIC: irq 68, gsi 68 -> cpu0 (auto)
|
|
IOAPIC: irq 68 -> gsi 68 level/low
|
|
IOAPIC: irq 69, gsi 69 -> cpu1 (auto)
|
|
IOAPIC: irq 69 -> gsi 69 level/low
|
|
IOAPIC: irq 70, gsi 70 -> cpu2 (auto)
|
|
IOAPIC: irq 70 -> gsi 70 level/low
|
|
IOAPIC: irq 71, gsi 71 -> cpu3 (auto)
|
|
IOAPIC: irq 71 -> gsi 71 level/low
|
|
IOAPIC: irq 72, gsi 72 -> cpu0 (auto)
|
|
IOAPIC: irq 72 -> gsi 72 level/low
|
|
IOAPIC: irq 73, gsi 73 -> cpu1 (auto)
|
|
IOAPIC: irq 73 -> gsi 73 level/low
|
|
IOAPIC: irq 74, gsi 74 -> cpu2 (auto)
|
|
IOAPIC: irq 74 -> gsi 74 level/low
|
|
IOAPIC: irq 75, gsi 75 -> cpu3 (auto)
|
|
IOAPIC: irq 75 -> gsi 75 level/low
|
|
IOAPIC: irq 76, gsi 76 -> cpu0 (auto)
|
|
IOAPIC: irq 76 -> gsi 76 level/low
|
|
IOAPIC: irq 77, gsi 77 -> cpu1 (auto)
|
|
IOAPIC: irq 77 -> gsi 77 level/low
|
|
IOAPIC: irq 78, gsi 78 -> cpu2 (auto)
|
|
IOAPIC: irq 78 -> gsi 78 level/low
|
|
IOAPIC: irq 79, gsi 79 -> cpu3 (auto)
|
|
IOAPIC: irq 79 -> gsi 79 level/low
|
|
IOAPIC: irq 80, gsi 80 -> cpu0 (auto)
|
|
IOAPIC: irq 80 -> gsi 80 level/low
|
|
IOAPIC: irq 81, gsi 81 -> cpu1 (auto)
|
|
IOAPIC: irq 81 -> gsi 81 level/low
|
|
IOAPIC: irq 82, gsi 82 -> cpu2 (auto)
|
|
IOAPIC: irq 82 -> gsi 82 level/low
|
|
IOAPIC: irq 83, gsi 83 -> cpu3 (auto)
|
|
IOAPIC: irq 83 -> gsi 83 level/low
|
|
IOAPIC: irq 84, gsi 84 -> cpu0 (auto)
|
|
IOAPIC: irq 84 -> gsi 84 level/low
|
|
IOAPIC: irq 85, gsi 85 -> cpu1 (auto)
|
|
IOAPIC: irq 85 -> gsi 85 level/low
|
|
IOAPIC: irq 86, gsi 86 -> cpu2 (auto)
|
|
IOAPIC: irq 86 -> gsi 86 level/low
|
|
IOAPIC: irq 87, gsi 87 -> cpu3 (auto)
|
|
IOAPIC: irq 87 -> gsi 87 level/low
|
|
IOAPIC: irq 88, gsi 88 -> cpu0 (auto)
|
|
IOAPIC: irq 88 -> gsi 88 level/low
|
|
IOAPIC: irq 89, gsi 89 -> cpu1 (auto)
|
|
IOAPIC: irq 89 -> gsi 89 level/low
|
|
IOAPIC: irq 90, gsi 90 -> cpu2 (auto)
|
|
IOAPIC: irq 90 -> gsi 90 level/low
|
|
IOAPIC: irq 91, gsi 91 -> cpu3 (auto)
|
|
IOAPIC: irq 91 -> gsi 91 level/low
|
|
IOAPIC: irq 92, gsi 92 -> cpu0 (auto)
|
|
IOAPIC: irq 92 -> gsi 92 level/low
|
|
IOAPIC: irq 93, gsi 93 -> cpu1 (auto)
|
|
IOAPIC: irq 93 -> gsi 93 level/low
|
|
IOAPIC: irq 94, gsi 94 -> cpu2 (auto)
|
|
IOAPIC: irq 94 -> gsi 94 level/low
|
|
IOAPIC: irq 95, gsi 95 -> cpu3 (auto)
|
|
IOAPIC: irq 95 -> gsi 95 level/low
|
|
IOAPIC: irq 96, gsi 96 -> cpu0 (auto)
|
|
IOAPIC: irq 17, gsi 96 -> cpu0 (auto)
|
|
IOAPIC: irq 17 -> gsi 96 level/low
|
|
IOAPIC: irq 97, gsi 97 -> cpu1 (auto)
|
|
IOAPIC: irq 97 -> gsi 97 level/low
|
|
IOAPIC: irq 98, gsi 98 -> cpu2 (auto)
|
|
IOAPIC: irq 98 -> gsi 98 level/low
|
|
IOAPIC: irq 99, gsi 99 -> cpu3 (auto)
|
|
IOAPIC: irq 99 -> gsi 99 level/low
|
|
IOAPIC: irq 100, gsi 100 -> cpu0 (auto)
|
|
IOAPIC: irq 100 -> gsi 100 level/low
|
|
IOAPIC: irq 101, gsi 101 -> cpu1 (auto)
|
|
IOAPIC: irq 101 -> gsi 101 level/low
|
|
IOAPIC: irq 102, gsi 102 -> cpu2 (auto)
|
|
IOAPIC: irq 102 -> gsi 102 level/low
|
|
IOAPIC: irq 103, gsi 103 -> cpu3 (auto)
|
|
IOAPIC: irq 103 -> gsi 103 level/low
|
|
IOAPIC: irq 104, gsi 104 -> cpu0 (auto)
|
|
IOAPIC: irq 104 -> gsi 104 level/low
|
|
IOAPIC: irq 105, gsi 105 -> cpu1 (auto)
|
|
IOAPIC: irq 105 -> gsi 105 level/low
|
|
IOAPIC: irq 106, gsi 106 -> cpu2 (auto)
|
|
IOAPIC: irq 106 -> gsi 106 level/low
|
|
IOAPIC: irq 107, gsi 107 -> cpu3 (auto)
|
|
IOAPIC: irq 107 -> gsi 107 level/low
|
|
IOAPIC: irq 108, gsi 108 -> cpu0 (auto)
|
|
IOAPIC: irq 108 -> gsi 108 level/low
|
|
IOAPIC: irq 109, gsi 109 -> cpu1 (auto)
|
|
IOAPIC: irq 109 -> gsi 109 level/low
|
|
IOAPIC: irq 110, gsi 110 -> cpu2 (auto)
|
|
IOAPIC: irq 110 -> gsi 110 level/low
|
|
IOAPIC: irq 111, gsi 111 -> cpu3 (auto)
|
|
IOAPIC: irq 111 -> gsi 111 level/low
|
|
IOAPIC: irq 112, gsi 112 -> cpu0 (auto)
|
|
IOAPIC: irq 112 -> gsi 112 level/low
|
|
IOAPIC: irq 113, gsi 113 -> cpu1 (auto)
|
|
IOAPIC: irq 113 -> gsi 113 level/low
|
|
IOAPIC: irq 114, gsi 114 -> cpu2 (auto)
|
|
IOAPIC: irq 114 -> gsi 114 level/low
|
|
IOAPIC: irq 115, gsi 115 -> cpu3 (auto)
|
|
IOAPIC: irq 115 -> gsi 115 level/low
|
|
IOAPIC: irq 116, gsi 116 -> cpu0 (auto)
|
|
IOAPIC: irq 116 -> gsi 116 level/low
|
|
IOAPIC: irq 117, gsi 117 -> cpu1 (auto)
|
|
IOAPIC: irq 117 -> gsi 117 level/low
|
|
IOAPIC: irq 118, gsi 118 -> cpu2 (auto)
|
|
IOAPIC: irq 118 -> gsi 118 level/low
|
|
IOAPIC: irq 119, gsi 119 -> cpu3 (auto)
|
|
IOAPIC: irq 119 -> gsi 119 level/low
|
|
IOAPIC: cpu0 irq 1 reserved
|
|
IOAPIC: cpu0 irq 2 reserved
|
|
IOAPIC: cpu0 irq 3 reserved
|
|
IOAPIC: cpu0 irq 5 reserved
|
|
IOAPIC: cpu0 irq 6 reserved
|
|
IOAPIC: cpu0 irq 7 reserved
|
|
IOAPIC: cpu0 irq 10 reserved
|
|
IOAPIC: cpu0 irq 11 reserved
|
|
IOAPIC: cpu0 irq 13 reserved
|
|
IOAPIC: cpu0 irq 14 reserved
|
|
IOAPIC: cpu0 irq 15 reserved
|
|
IOAPIC: cpu1 irq 0 reserved
|
|
IOAPIC: cpu1 irq 2 reserved
|
|
IOAPIC: cpu1 irq 3 reserved
|
|
IOAPIC: cpu1 irq 4 reserved
|
|
IOAPIC: cpu1 irq 6 reserved
|
|
IOAPIC: cpu1 irq 7 reserved
|
|
IOAPIC: cpu1 irq 8 reserved
|
|
IOAPIC: cpu1 irq 9 reserved
|
|
IOAPIC: cpu1 irq 10 reserved
|
|
IOAPIC: cpu1 irq 11 reserved
|
|
IOAPIC: cpu1 irq 12 reserved
|
|
IOAPIC: cpu1 irq 14 reserved
|
|
IOAPIC: cpu1 irq 15 reserved
|
|
IOAPIC: cpu2 irq 0 reserved
|
|
IOAPIC: cpu2 irq 1 reserved
|
|
IOAPIC: cpu2 irq 2 reserved
|
|
IOAPIC: cpu2 irq 3 reserved
|
|
IOAPIC: cpu2 irq 4 reserved
|
|
IOAPIC: cpu2 irq 5 reserved
|
|
IOAPIC: cpu2 irq 7 reserved
|
|
IOAPIC: cpu2 irq 8 reserved
|
|
IOAPIC: cpu2 irq 9 reserved
|
|
IOAPIC: cpu2 irq 11 reserved
|
|
IOAPIC: cpu2 irq 12 reserved
|
|
IOAPIC: cpu2 irq 13 reserved
|
|
IOAPIC: cpu2 irq 15 reserved
|
|
IOAPIC: cpu3 irq 0 reserved
|
|
IOAPIC: cpu3 irq 1 reserved
|
|
IOAPIC: cpu3 irq 2 reserved
|
|
IOAPIC: cpu3 irq 4 reserved
|
|
IOAPIC: cpu3 irq 5 reserved
|
|
IOAPIC: cpu3 irq 6 reserved
|
|
IOAPIC: cpu3 irq 8 reserved
|
|
IOAPIC: cpu3 irq 9 reserved
|
|
IOAPIC: cpu3 irq 10 reserved
|
|
IOAPIC: cpu3 irq 12 reserved
|
|
IOAPIC: cpu3 irq 13 reserved
|
|
IOAPIC: cpu3 irq 14 reserved
|
|
IOAPIC: legacy irq max 120
|
|
ELCR Found. ISA IRQs programmed as:
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
E E E E E E E E E E E E E E E E
|
|
MPTABLE: 1:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 1:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 1:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 1:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:1 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:1 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:1 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:1 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:20 INTC -> IOAPIC 0.17
|
|
MPTABLE: 0:22 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:22 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:22 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:22 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:23 INTB -> IOAPIC 0.17
|
|
MPTABLE: 2:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 2:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 2:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 2:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:28 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:28 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:28 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:28 INTD -> IOAPIC 0.19
|
|
MPTABLE: 4:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 4:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 4:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 4:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:29 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:29 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:29 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:29 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:31 INTA -> IOAPIC 0.18
|
|
MPTABLE: 0:31 INTD -> IOAPIC 0.23
|
|
Initialize MI interrupts
|
|
MWAIT hints (2 C1 hints):
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
MWAIT deep hints:
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
C3/0 hint 0x0020
|
|
C3/1 hint 0x0021
|
|
C4/0 hint 0x0030
|
|
C4/1 hint 0x0031
|
|
C4/2 hint 0x0032
|
|
C4/3 hint 0x0033
|
|
C5/0 hint 0x0040
|
|
objcache: magazine cap [6, 134]
|
|
Finish MP startup
|
|
Active CPU Mask: 000000000000000f
|
|
TSC testing MP synchronization ...
|
|
cpu0: TSC testing MP synchronization ...
|
|
cpu0: TSC is MP synchronized after 59161 tries
|
|
cpu1: TSC testing MP synchronization ...
|
|
cpu2: TSC testing MP synchronization ...
|
|
cpu3: TSC testing MP synchronization ...
|
|
cpu1: TSC is MP synchronized after 50000 tries
|
|
cpu3: TSC is MP synchronized after 50000 tries
|
|
cpu2: TSC is MP synchronized after 50000 tries
|
|
TSC is MP synchronized
|
|
TSC: cputimer freq 99753047, shift 5
|
|
Preloaded elf kernel "kernel" at 0xffffffff8294d000.
|
|
Preloaded elf obj module "acpi.ko" at 0xffffffff8294d860.
|
|
Preloaded elf obj module "ehci.ko" at 0xffffffff8294e2b8.
|
|
Preloaded elf obj module "xhci.ko" at 0xffffffff8294ebd0.
|
|
VMM: available, disabled by default
|
|
Start usched_dfly helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
start dummy scheduler helpers on cpus: 0 1 2 3
|
|
Start usched_bsd4 helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
sensors: tasks default to cpu3
|
|
wdog: In-kernel automatic watchdog reset enabled
|
|
ath_dfs: WTF module
|
|
wlan: <802.11 Link Layer>
|
|
ath_rate: <SampleRate bit-rate selection algorithm>
|
|
kbd: new array size 4
|
|
kbd1 at kbdmux0
|
|
md0: Malloc disk
|
|
md0: invalid primary partition table: no magic
|
|
crypto: <crypto core>
|
|
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
|
|
hpt27xx: RocketRAID 27xx controller driver v1.0
|
|
interrupt uses mplock: swi_taskq
|
|
IOAPIC: rman cpu0 0 - 0
|
|
IOAPIC: rman cpu0 4 - 4
|
|
IOAPIC: rman cpu0 8 - 9
|
|
IOAPIC: rman cpu0 12 - 12
|
|
IOAPIC: rman cpu0 16 - 95
|
|
IOAPIC: rman cpu0 97 - 191
|
|
IOAPIC: rman cpu1 1 - 1
|
|
IOAPIC: rman cpu1 5 - 5
|
|
IOAPIC: rman cpu1 13 - 13
|
|
IOAPIC: rman cpu1 16 - 95
|
|
IOAPIC: rman cpu1 97 - 191
|
|
IOAPIC: rman cpu2 6 - 6
|
|
IOAPIC: rman cpu2 10 - 10
|
|
IOAPIC: rman cpu2 14 - 14
|
|
IOAPIC: rman cpu2 16 - 95
|
|
IOAPIC: rman cpu2 97 - 191
|
|
IOAPIC: rman cpu3 3 - 3
|
|
IOAPIC: rman cpu3 7 - 7
|
|
IOAPIC: rman cpu3 11 - 11
|
|
IOAPIC: rman cpu3 15 - 95
|
|
IOAPIC: rman cpu3 97 - 191
|
|
ACPI: RSDP 0x00000000772DD000 000024 (v02 DELL )
|
|
ACPI: XSDT 0x00000000772DD0A8 0000D4 (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FACP 0x00000000772FE7D8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: DSDT 0x00000000772DD210 0215C8 (v02 DELL CBX3 01072009 INTL 20120913)
|
|
ACPI: FACS 0x0000000077ABEF80 000040
|
|
ACPI: APIC 0x00000000772FE8E8 000084 (v03 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FPDT 0x00000000772FE970 000044 (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FIDT 0x00000000772FE9B8 00009C (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: MCFG 0x00000000772FEA58 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
|
|
ACPI: HPET 0x00000000772FEA98 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
|
|
ACPI: SSDT 0x00000000772FEAD0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000772FEE40 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
|
|
ACPI: UEFI 0x00000000773041F8 000042 (v01 00000000 00000000)
|
|
ACPI: LPIT 0x0000000077304240 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
|
|
ACPI: SSDT 0x00000000773042D8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
|
|
ACPI: SSDT 0x0000000077304520 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000773070D0 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
|
|
ACPI: DBGP 0x0000000077307D18 000034 (v01 INTEL 00000000 MSFT 0000005F)
|
|
ACPI: DBG2 0x0000000077307D50 000054 (v00 INTEL 00000000 MSFT 0000005F)
|
|
ACPI: SSDT 0x0000000077307DA8 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000773083C0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
|
|
ACPI: MSDM 0x0000000077309218 000055 (v03 DELL CBX3 06222004 AMI 00010013)
|
|
ACPI: SLIC 0x0000000077309270 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
|
|
ACPI: BGRT 0x00000000773093E8 000038 (v00 ?? 01072009 AMI 00010013)
|
|
ACPI: DMAR 0x0000000077309420 000070 (v01 INTEL SKL 00000001 INTL 00000001)
|
|
ACPI: ASF! 0x0000000077309490 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
|
|
cryptosoft0.nexus0.root0
|
|
cryptosoft0: <software crypto> [tentative] on motherboard
|
|
crypto: assign cryptosoft0 driver id 0, flags 234881024
|
|
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
|
|
cryptosoft0: <software crypto> [attached!] on motherboard
|
|
aesni0.nexus0.root0
|
|
aesni0: <AES-CBC,AES-XTS> [tentative] on motherboard
|
|
crypto: assign aesni0 driver id 1, flags 16777216
|
|
crypto: aesni0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: aesni0 registers alg 22 flags 0 maxoplen 0
|
|
aesni0: <AES-CBC,AES-XTS> [attached!] on motherboard
|
|
padlock0: No ACE support.
|
|
rdrand0.nexus0.root0
|
|
rdrand0: <RdRand RNG> [tentative] on motherboard
|
|
rdrand0: <RdRand RNG> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <DELL CBX3 > [tentative] on motherboard
|
|
ACPI: Executed 21 blocks of module-level executable AML code
|
|
ACPI: 8 ACPI AML tables successfully acquired and loaded
|
|
PCIe: Memory Mapped configuration base @ 0xe0000000, bus [0, 255]
|
|
PCIe: Using Memory Mapped configuration
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI testing level/high
|
|
IOAPIC: irq 9, gsi 9 edge/high -> level/high
|
|
ACPI FADT: SCI select level/high
|
|
acpi0: Power Button (fixed)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0 [tentative] on acpi0
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 4, width = 2
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] on acpi0
|
|
acpi_hpet0.acpi0.nexus0.root0
|
|
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: vend: 0x8086, rev: 0x1, num: 7, opts: legacy_route 64-bit
|
|
acpi_hpet0: frequency 24000000
|
|
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
pci_link0: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 7 12
|
|
Validation 0 7 N 0 7 12
|
|
After Disable 0 255 N 0 7 12
|
|
pci_link1: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 3 10
|
|
Validation 0 10 N 0 3 10
|
|
After Disable 0 255 N 0 3 10
|
|
pci_link2: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 5 N 0 4 5
|
|
Validation 0 5 N 0 4 5
|
|
After Disable 0 255 N 0 4 5
|
|
pci_link3: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 6 11
|
|
Validation 0 11 N 0 6 11
|
|
After Disable 0 255 N 0 6 11
|
|
pci_link4: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 7 11
|
|
Validation 0 7 N 0 7 11
|
|
After Disable 0 255 N 0 7 11
|
|
pci_link5: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 3 N 0 3 10
|
|
Validation 0 3 N 0 3 10
|
|
After Disable 0 255 N 0 3 10
|
|
pci_link6: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 4 N 0 4 5
|
|
Validation 0 4 N 0 4 5
|
|
After Disable 0 255 N 0 4 5
|
|
pci_link7: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 6 12
|
|
Validation 0 255 N 0 6 12
|
|
After Disable 0 255 N 0 6 12
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
pcib0.acpi0.nexus0.root0
|
|
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
|
|
pci0.pcib0.acpi0.nexus0.root0
|
|
pci0: <ACPI PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x191f, revid=0x07
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x1901, revid=0x07
|
|
domain=0, bus=0, slot=1, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x00142580
|
|
pcib0: matched entry for 0.1.INTA
|
|
pcib0: slot 1 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa12f, revid=0x31
|
|
domain=0, bus=0, slot=20, func=0
|
|
class=0c-03-30, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 8 messages, 64 bit
|
|
map[10]: type Memory, range 64, base 0xdff20000, size 16, enabled
|
|
pcib0: matched entry for 0.20.INTC
|
|
pcib0: slot 20 INTC hardwired to GSI 18, IRQ 18
|
|
unknown: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdff20000
|
|
xhci early: SMM active, request owner change
|
|
xhci early: handover successful
|
|
found-> vendor=0x8086, dev=0xa131, revid=0x31
|
|
domain=0, bus=0, slot=20, func=2
|
|
class=11-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0102, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type Memory, range 64, base 0xdff3b000, size 12, enabled
|
|
pcib0: matched entry for 0.20.INTC
|
|
pcib0: slot 20 INTC hardwired to GSI 18, IRQ 18
|
|
found-> vendor=0x8086, dev=0xa13a, revid=0x31
|
|
domain=0, bus=0, slot=22, func=0
|
|
class=07-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 64, base 0xdff3a000, size 12, memory disabled
|
|
pcib0: matched entry for 0.22.INTA
|
|
pcib0: slot 22 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa13d, revid=0x31
|
|
domain=0, bus=0, slot=22, func=3
|
|
class=07-00-02, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x00b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type I/O Port, range 32, base 0xf060, size 3, port disabled
|
|
map[14]: type Memory, range 32, base 0xdff39000, size 12, memory disabled
|
|
pcib0: matched entry for 0.22.INTD
|
|
pcib0: slot 22 INTD hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0xa102, revid=0x31
|
|
domain=0, bus=0, slot=23, func=0
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type Memory, range 32, base 0xdff34000, size 13, enabled
|
|
map[14]: type Memory, range 32, base 0xdff38000, size 8, enabled
|
|
map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
|
|
map[24]: type Memory, range 32, base 0xdff37000, size 11, enabled
|
|
pcib0: matched entry for 0.23.INTB
|
|
pcib0: slot 23 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0xa110, revid=0xf1
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x001cb200
|
|
pcib0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa118, revid=0xf1
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024fd00
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa146, revid=0x31
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0xa121, revid=0x31
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=05-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
map[10]: type Memory, range 32, base 0xdff30000, size 14, enabled
|
|
found-> vendor=0x8086, dev=0xa123, revid=0x31
|
|
domain=0, bus=0, slot=31, func=4
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
map[10]: type Memory, range 64, base 0xdff36000, size 8, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
|
|
pcib0: matched entry for 0.31.INTA
|
|
pcib0: slot 31 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x15b7, revid=0x31
|
|
domain=0, bus=0, slot=31, func=6
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 32, base 0xdff00000, size 17, enabled
|
|
pcib0: matched entry for 0.31.INTD
|
|
pcib0: slot 31 INTD hardwired to GSI 19, IRQ 19
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 1.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xe000-0xefff
|
|
pcib1: memory decode 0xdfe00000-0xdfefffff
|
|
pcib1: prefetched decode 0xc0000000-0xcfffffff
|
|
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
found-> vendor=0x1002, dev=0x6610, revid=0x83
|
|
domain=0, bus=1, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
|
|
pcib1: requested memory range 0xc0000000-0xcfffffff: good
|
|
map[18]: type Memory, range 64, base 0xdfe00000, size 18, enabled
|
|
pcib1: requested memory range 0xdfe00000-0xdfe3ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled
|
|
pcib1: requested I/O range 0xe000-0xe0ff: in range
|
|
pcib1: matched entry for 1.0.INTA
|
|
pcib1: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x1002, dev=0xaab0, revid=0x00
|
|
domain=0, bus=1, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xdfe60000, size 14, enabled
|
|
pcib1: requested memory range 0xdfe60000-0xdfe63fff: good
|
|
pcib1: matched entry for 1.0.INTB
|
|
pcib1: slot 0 INTB hardwired to GSI 17, IRQ 17
|
|
vgapci0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0xe000-0xe0ff mem 0xdfe00000-0xdfe3ffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1
|
|
vgapci0: Boot video device
|
|
vgapci0: <VGA-compatible display> [attached!] port 0xe000-0xe0ff mem 0xdfe00000-0xdfe3ffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1
|
|
pci1: <multimedia, HDA> (vendor 0x1002, dev 0xaab0) at device 0.1 irq 17
|
|
pci1: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 1.0 on pci0
|
|
xhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
xhci0: <XHCI (generic) USB 3.0 controller> [tentative] mem 0xdff20000-0xdff2ffff irq 18 at device 20.0 on pci0
|
|
xhci0: 32 bytes context size, 64-bit DMA
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
xhci0: attempting to allocate 1 MSI vector (8 supported)
|
|
alloc MSI intr 18 on cpu0
|
|
xhci0: using IRQ 18 on cpu0 for MSI
|
|
map MSI intr 18 on cpu0
|
|
usbus0.xhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus0 [tentative] on xhci0
|
|
xhci0: usbpf: Attached
|
|
usbus0 [attached!] on xhci0
|
|
xhci0: <XHCI (generic) USB 3.0 controller> [attached!] mem 0xdff20000-0xdff2ffff irq 18,18 at device 20.0 on pci0
|
|
usbus0: 5.0Gbps Super Speed USB v3.0
|
|
pci0: <dasp> (vendor 0x8086, dev 0xa131) at device 20.2 irq 18
|
|
pci0: <simple comms> (vendor 0x8086, dev 0xa13a) at device 22.0 irq 16
|
|
pci0: <simple comms, UART> (vendor 0x8086, dev 0xa13d) at device 22.3 irq 19
|
|
ahci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057 mem 0xdff37000-0xdff377ff,0xdff38000-0xdff380ff,0xdff34000-0xdff35fff irq 17 at device 23.0 on pci0
|
|
ahci0: attempting to allocate 1 MSI vector (1 supported)
|
|
alloc MSI intr 16 on cpu1
|
|
ahci0: using IRQ 16 on cpu1 for MSI
|
|
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xdff37000
|
|
ugen0.1: <0x8086> at usbus0
|
|
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
|
|
ahci0: AE did not auto-clear!
|
|
ahci0: Intel hocus pocus
|
|
ahci0: AHCI 1.3.1 cap 0xe734ff43<S64A,NCQ,SSNTF,SALP,SAL,SCLO,SAM,PMD,SSC,PSC,EMS> cap2 0x3c<DESO,SADM,SDS,APST>, 4 ports, 32 tags/port, gen 3 (6Gbps)
|
|
ahci0.0: START HARDRESET
|
|
ahci0.3: START HARDRESET
|
|
ahci0.2: START HARDRESET
|
|
ahci0.1: START HARDRESET
|
|
map MSI intr 16 on cpu1
|
|
uhub0: 26 ports with 26 removable, self powered
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
alignment check failed
|
|
alignment check failed
|
|
ugen0.2: <Unicomp Inc> at usbus0
|
|
ukbd0: <Boot Ifc Keyboard> on usbus0
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
|
|
ahci0.0: END HARDRESET 0
|
|
ahci0.0: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.1: END HARDRESET 0
|
|
ahci0.1: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.0: SIG 00000101
|
|
ahci0.1: SIG eb140101
|
|
ahci0.0: END SOFTRESET
|
|
ahci0.1: END SOFTRESET
|
|
ahci0.0: Found DISK "ST500DM002-1BD142 KC48" serial="Z6EN1ZZ0"
|
|
ahci0.0: tags=32/32 satacap=850e satacap2=0006 satafea=0048 NCQ=YES capacity=476940.02MB
|
|
ahci0.0: f85=3469 f86=be41 f87=4163 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.0: Set dummy xfer mode to 46
|
|
ahci0.1: Found ATAPI "PLDS DVD+/-RW DU-8A5LH DD11" serial="YYCRW7363957O62CVA03"
|
|
ahci0.1: tags=0/32 satacap=0202 satacap2=0010 satafea=0068 NCQ=NO capacity=1.00MB
|
|
ahci0.1: f85=4210 f86=1000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
|
|
ahci0.1: Set dummy xfer mode to 46
|
|
ahci0.1: TFES slot 5 ci_saved = 00000020
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
(probe0:ahci0:1:0:0): Down reving Protocol Version from 2 to 0?
|
|
ahci0.1: TFES slot 7 ci_saved = 00000080
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.3: Port appears to be unplugged
|
|
ahci0.2: Port appears to be unplugged
|
|
ahci0.3: No device detected
|
|
ahci0.2: No device detected
|
|
ahci0.3: END HARDRESET 19
|
|
ahci0.2: END HARDRESET 19
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057 mem 0xdff37000-0xdff377ff,0xdff38000-0xdff380ff,0xdff34000-0xdff35fff irq 16,17 at device 23.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 3
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: no prefetched decode
|
|
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
found-> vendor=0x104c, dev=0x8240, revid=0x00
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
PCI Express ver.2 cap=0x0072[PCIE2PCI]
|
|
pcib3.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] at device 0.0 on pci2
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0xfff000-0xfff
|
|
pcib3: no prefetched decode
|
|
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.RP01.PXSX - AE_NOT_FOUND
|
|
pci3.pcib3.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] at device 0.0 on pci2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 29.0 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0xd000-0xdfff
|
|
pcib4: memory decode 0xdfd00000-0xdfdfffff
|
|
pcib4: prefetched decode 0xb0000000-0xbfffffff
|
|
pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x1002, dev=0x6771, revid=0x00
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xb0000000, size 28, memory disabled
|
|
pcib4: requested memory range 0xb0000000-0xbfffffff: good
|
|
map[18]: type Memory, range 64, base 0xdfd20000, size 17, enabled
|
|
pcib4: requested memory range 0xdfd20000-0xdfd3ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xd000, size 8, port disabled
|
|
pcib4: requested I/O range 0xd000-0xd0ff: in range
|
|
pcib4: matched entry for 4.0.INTA
|
|
pcib4: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x1002, dev=0xaa98, revid=0x00
|
|
domain=0, bus=4, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xdfd40000, size 14, memory disabled
|
|
pcib4: requested memory range 0xdfd40000-0xdfd43fff: good
|
|
pcib4: matched entry for 4.0.INTB
|
|
pcib4: slot 0 INTB hardwired to GSI 17, IRQ 17
|
|
vgapci1.pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci1: <VGA-compatible display> [tentative] port 0xd000-0xd0ff mem 0xdfd20000-0xdfd3ffff,0xb0000000-0xbfffffff irq 16 at device 0.0 on pci4
|
|
vgapci1: <VGA-compatible display> [attached!] port 0xd000-0xd0ff mem 0xdfd20000-0xdfd3ffff,0xb0000000-0xbfffffff irq 16 at device 0.0 on pci4
|
|
pci4: <multimedia, HDA> (vendor 0x1002, dev 0xaa98) at device 0.1 irq 17
|
|
pci4: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 29.0 on pci0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
pci0: <memory> (vendor 0x8086, dev 0xa121) at device 31.2
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0xa123) at device 31.4 irq 16
|
|
em0.pci0.pcib0.acpi0.nexus0.root0
|
|
em0: <Intel(R) PRO/1000 Network Connection PCH_SPT_I219_LM2 7.4.2> [tentative] mem 0xdff00000-0xdff1ffff irq 19 at device 31.6 on pci0
|
|
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdff00000
|
|
em0: IRQ shared
|
|
em0: bpf attached
|
|
em0: MAC address: 64:00:6a:11:aa:e8
|
|
em0: <Intel(R) PRO/1000 Network Connection PCH_SPT_I219_LM2 7.4.2> [attached!] mem 0xdff00000-0xdff1ffff irq 19 at device 31.6 on pci0
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Sleep Button> [tentative] on acpi0
|
|
acpi_button0: <Sleep Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
acpi_button1.acpi0.nexus0.root0
|
|
acpi_button1: <Power Button> [tentative] on acpi0
|
|
acpi_button1: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_tz0.acpi0.nexus0.root0
|
|
acpi_tz0: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz0: <Thermal Zone> [attached!] on acpi0
|
|
acpi_tz1.acpi0.nexus0.root0
|
|
acpi_tz1: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz1: <Thermal Zone> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: irq maps: 0x1 0x11 0x11 0x11
|
|
sio0.acpi0.nexus0.root0
|
|
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
atkbdc0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0.atkbdc0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
|
|
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
|
|
psm0: current command byte:006d
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF813ADB7AC0 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF81EE123F80 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst0: non-C3 0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: create pkg domain0, coord 0xfe
|
|
cpu_pst0: control reg 127 0
|
|
cpu_pst0: status reg 127 0
|
|
cpu_pst0: freq 3201, pwr 65000, xlat 10, blat 10, cv 00002400, sv 00002400
|
|
cpu_pst0: freq 3200, pwr 65000, xlat 10, blat 10, cv 00002000, sv 00002000
|
|
cpu_pst0: freq 3000, pwr 59079, xlat 10, blat 10, cv 00001e00, sv 00001e00
|
|
cpu_pst0: freq 2900, pwr 56516, xlat 10, blat 10, cv 00001d00, sv 00001d00
|
|
cpu_pst0: freq 2700, pwr 51532, xlat 10, blat 10, cv 00001b00, sv 00001b00
|
|
cpu_pst0: freq 2500, pwr 46744, xlat 10, blat 10, cv 00001900, sv 00001900
|
|
cpu_pst0: freq 2300, pwr 41545, xlat 10, blat 10, cv 00001700, sv 00001700
|
|
cpu_pst0: freq 2200, pwr 39313, xlat 10, blat 10, cv 00001600, sv 00001600
|
|
cpu_pst0: freq 2000, pwr 34990, xlat 10, blat 10, cv 00001400, sv 00001400
|
|
cpu_pst0: freq 1800, pwr 30835, xlat 10, blat 10, cv 00001200, sv 00001200
|
|
cpu_pst0: freq 1700, pwr 28823, xlat 10, blat 10, cv 00001100, sv 00001100
|
|
cpu_pst0: freq 1500, pwr 24402, xlat 10, blat 10, cv 00000f00, sv 00000f00
|
|
cpu_pst0: freq 1300, pwr 20687, xlat 10, blat 10, cv 00000d00, sv 00000d00
|
|
cpu_pst0: freq 1100, pwr 17137, xlat 10, blat 10, cv 00000b00, sv 00000b00
|
|
cpu_pst0: freq 1000, pwr 15427, xlat 10, blat 10, cv 00000a00, sv 00000a00
|
|
cpu_pst0: freq 800, pwr 12119, xlat 10, blat 10, cv 00000800, sv 00000800
|
|
cpu_pst0: _PPC 0
|
|
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
|
|
clockmod0.cpu0.acpi0.nexus0.root0
|
|
clockmod0: <CPU clock modulation> [tentative] on cpu0
|
|
clock modulation:
|
|
0x0000 100.00%
|
|
0x001f 93.75%
|
|
0x001e 87.50%
|
|
0x001d 81.25%
|
|
0x001c 75.00%
|
|
0x001b 68.75%
|
|
0x001a 62.50%
|
|
0x0019 56.25%
|
|
0x0018 50.00%
|
|
0x0017 43.75%
|
|
0x0016 37.50%
|
|
0x0015 31.25%
|
|
0x0014 25.00%
|
|
0x0013 18.75%
|
|
0x0012 12.50%
|
|
0x0011 6.25%
|
|
clockmod0: <CPU clock modulation> [attached!] on cpu0
|
|
perfbias0.cpu0.acpi0.nexus0.root0
|
|
perfbias0: <CPU perf-energy bias> [tentative] on cpu0
|
|
perfbias0: <CPU perf-energy bias> [attached!] on cpu0
|
|
coretemp0.cpu0.acpi0.nexus0.root0
|
|
coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
|
|
coretemp0: Setting TjMax=100
|
|
coretemp0: pkg master cpu3
|
|
coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF81ED705A80 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF8061618060 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst1: non-C3 0
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1.cpu1.acpi0.nexus0.root0
|
|
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
|
|
cpu_pst1: control reg 127 0
|
|
cpu_pst1: status reg 127 0
|
|
cpu_pst1: _PPC 0
|
|
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
|
|
clockmod1.cpu1.acpi0.nexus0.root0
|
|
clockmod1: <CPU clock modulation> [tentative] on cpu1
|
|
clockmod1: <CPU clock modulation> [attached!] on cpu1
|
|
perfbias1.cpu1.acpi0.nexus0.root0
|
|
perfbias1: <CPU perf-energy bias> [tentative] on cpu1
|
|
perfbias1: <CPU perf-energy bias> [attached!] on cpu1
|
|
coretemp1.cpu1.acpi0.nexus0.root0
|
|
coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
|
|
coretemp1: Setting TjMax=100
|
|
coretemp1: pkg master cpu3
|
|
coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst2.cpu2.acpi0.nexus0.root0
|
|
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst2: non-C3 0
|
|
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
|
|
cpu_pst2.cpu2.acpi0.nexus0.root0
|
|
cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
|
|
cpu_pst2: control reg 127 0
|
|
cpu_pst2: status reg 127 0
|
|
cpu_pst2: _PPC 0
|
|
cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
|
|
clockmod2.cpu2.acpi0.nexus0.root0
|
|
clockmod2: <CPU clock modulation> [tentative] on cpu2
|
|
clockmod2: <CPU clock modulation> [attached!] on cpu2
|
|
perfbias2.cpu2.acpi0.nexus0.root0
|
|
perfbias2: <CPU perf-energy bias> [tentative] on cpu2
|
|
perfbias2: <CPU perf-energy bias> [attached!] on cpu2
|
|
coretemp2.cpu2.acpi0.nexus0.root0
|
|
coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
|
|
coretemp2: Setting TjMax=100
|
|
coretemp2: pkg master cpu3
|
|
coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst3.cpu3.acpi0.nexus0.root0
|
|
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst3: non-C3 0
|
|
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
|
|
cpu_pst3.cpu3.acpi0.nexus0.root0
|
|
cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
|
|
cpu_pst3: control reg 127 0
|
|
cpu_pst3: status reg 127 0
|
|
cpu_pst3: _PPC 0
|
|
cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
|
|
clockmod3.cpu3.acpi0.nexus0.root0
|
|
clockmod3: <CPU clock modulation> [tentative] on cpu3
|
|
clockmod3: <CPU clock modulation> [attached!] on cpu3
|
|
perfbias3.cpu3.acpi0.nexus0.root0
|
|
perfbias3: <CPU perf-energy bias> [tentative] on cpu3
|
|
perfbias3: <CPU perf-energy bias> [attached!] on cpu3
|
|
coretemp3.cpu3.acpi0.nexus0.root0
|
|
coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
|
|
coretemp3: Setting TjMax=100
|
|
coretemp3: pkg master cpu3
|
|
coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ACPI: Enabled 5 GPEs in block 00 to 7F
|
|
acpi0: <DELL CBX3 > [attached!] at port 0xff00-0xfffe,0x1854-0x1857,0x800-0x87f,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x680-0x69f,0xffff,0xffff,0xffff,0x1800-0x18fe,0x164e-0x164f,0xa00-0xa3f,0xa40-0xa7f iomem 0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xff000000-0xffffffff,0xfee00000-0xfeefffff,0xdffe0000-0xdfffffff irq 9 on motherboard
|
|
atkbdc-: atkbdc0 exists, using next available unit number
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
orm0: <ISA Option ROMs> [tentative] at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
|
|
orm0: <ISA Option ROMs> [attached!] at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
atkbdc1 [tentative] failed to probe at port 0x60 on isa0
|
|
vga0 [tentative] failed to probe on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x500 on isa0
|
|
cpu_cst: global Cx count 3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
sc0: EFI_FB <16 virtual consoles, flags=0x700>
|
|
sc0:, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x500 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0: wbsio_probe port 0x2e: Device ID 0x00, Rev 0x00
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
lnc0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
usbpf: Initialized
|
|
crypto: <crypto device>
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
lo0: bpf attached
|
|
hptrr: no controller detected.
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 4 busses
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: Finished configuring bus: ahci0
|
|
ahci0.1: TFES slot 8 ci_saved = 00000100
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.1: TFES slot 11 ci_saved = 00000800
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: finished configuring all busses
|
|
da0: si_iosize_max:131072
|
|
da0 at ahci0 bus 0 target 0 lun 0
|
|
da0: <SATA ST500DM002-1BD14 KC48> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number Z6EN1ZZ0
|
|
da0: 600.000MB/s transfers
|
|
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
|
|
ahci0.1: TFES slot 13 ci_saved = 00002000
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
cd0 at ahci0 bus 1 target 0 lun 0
|
|
cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI-0 device
|
|
cd0: 150.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
|
|
da0: Found GPT in slice #1
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:serno/Z6EN1ZZ0.s1d
|
|
HAMMER(ROOT) recovery check seqno=0010d3b1
|
|
HAMMER(ROOT) recovery range 30000000017e22d0-30000000017e22d0
|
|
HAMMER(ROOT) recovery nexto 30000000017e22d0 endseqno=0010d3b2
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 6160k, remaining available: 131072k
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
HAMMER(BUILD) recovery check seqno=0010004b
|
|
HAMMER(BUILD) recovery range 3000000000007400-3000000000007400
|
|
HAMMER(BUILD) recovery nexto 3000000000007400 endseqno=0010004c
|
|
HAMMER(BUILD) mounted clean, no recovery needed
|
|
kthread 0xffffff82f7c58c80 syncer7 has exited
|
|
kthread 0xffffff82f7c59780 syncer9 has exited
|
|
kthread 0xffffff82f7c59200 syncer8 has exited
|
|
kthread 0xffffff82f7c58c80 syncer10 has exited
|
|
kthread 0xffffff813a5d5000 syncer11 has exited
|
|
kthread 0xffffff82f7c59200 syncer12 has exited
|
|
swap low/high-water marks set to 167769/251654
|
|
boot() called on cpu#1
|
|
Switching to cpu #0 for shutdown
|
|
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
|
|
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
|
|
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
|
|
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
|
|
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
|
|
|
|
syncing disks...
|
|
done
|
|
kthread 0xffffff82f7c59780 syncer14 has exited
|
|
kthread 0xffffff82f7c59200 syncer13 has exited
|
|
kthread 0xffffff813a5d5580 syncer6 has exited
|
|
kthread 0xffffff82f7c58700 syncer5 has exited
|
|
vflush: Warning, cannot destroy busy device vnode
|
|
unmount of filesystem mounted from devfs failed (BUSY)
|
|
unmount(0xffffff81ef060840): Forced unmount: 0 namecache references still present
|
|
unmount(0xffffff81ef060840): Forced unmount: 1 mount refs still present
|
|
kthread 0xffffff813a5d0880 syncer3 has exited
|
|
vflush: Warning, cannot destroy busy device vnode
|
|
unmount of filesystem mounted from devfs failed (BUSY)
|
|
Uptime: 4m12s
|
|
usbus0: Controller shutdown
|
|
uhub0: at usbus0, port 1, addr 1 (disconnected)
|
|
ugen0.2: <Unicomp Inc> at usbus0 (disconnected)
|
|
ukbd0: at uhub0, port 5, addr 1 (disconnected)
|
|
ukbd0: detached
|
|
uhub0: detached
|
|
usbus0: Controller shutdown complete
|
|
pcib1: wake_prep disabled wake for \\_SB_.PCI0.PEG0 (S5)
|
|
vgapci0: wake_prep disabled wake for \\_SB_.PCI0.PEG0.PEGP (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.PEG1 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.PEG1.PEGP (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.PEG2 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.PEG2.PEGP (S5)
|
|
atkbdc0: wake_prep disabled wake for \\_SB_.PCI0.LPCB.PS2K (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.LPCB.PS2M (S5)
|
|
pcib4: wake_prep disabled wake for \\_SB_.PCI0.RP09 (S5)
|
|
vgapci1: wake_prep disabled wake for \\_SB_.PCI0.RP09.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP10 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP10.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP11 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP11.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP12 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP12.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP13 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP13.PXSX (S5)
|
|
pcib2: wake_prep disabled wake for \\_SB_.PCI0.RP01 (S5)
|
|
pcib3: wake_prep disabled wake for \\_SB_.PCI0.RP01.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP02 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP02.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP03 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP03.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP04 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP04.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP05 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP05.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP06 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP06.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP07 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP07.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP08 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP08.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP17 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP17.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP18 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP18.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP19 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP19.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP20 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP20.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP14 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP14.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP15 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP15.PXSX (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP16 (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.RP16.PXSX (S5)
|
|
em0: wake_prep disabled wake for \\_SB_.PCI0.GLAN (S5)
|
|
xhci0: wake_prep disabled wake for \\_SB_.PCI0.XHC_ (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.XDCI (S5)
|
|
unknown: wake_prep disabled wake for \\_SB_.PCI0.HDAS (S5)
|
|
Copyright (c) 2003-2017 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
Slab ZoneSize set to 128KB
|
|
Leaving critical section, allowing interrupts
|
|
ACPI SDT: RSDP in kenv hint
|
|
ACPI FADT: SCI irq 9, conform/conform
|
|
DragonFly v4.9.0.242.gfa5c6-DEVELOPMENT #0: Fri May 12 12:28:22 UTC 2017
|
|
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
|
|
Calibrating clock(s) ...
|
|
TSC clock: 3191834651 Hz (Method A)
|
|
i8254 clock: 1193120 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
TSC invariant clock: 3192099032 Hz
|
|
CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (3192.10-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x506e3 Stepping = 3
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x77fafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
|
|
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
|
|
AMD Features2=0x121<LAHF,ABM,Prefetch>
|
|
Structured Extended Features=0x29c6fbb<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM,RDSEED,ADX,SMAP>
|
|
Thermal and PM Features=0x27f7<SENSOR,TURBO,ARAT,PLN,ECMD,PTM,HWP>
|
|
MONITOR/MWAIT Features=0x3<CST,INTBRK>
|
|
npx mask: 0x0000ffff
|
|
real memory = 8483803136 (8090 MB)
|
|
Physical memory chunk(s):
|
|
0x00020000 - 0x0003ffff, 131072 bytes (32 pages)
|
|
0x00060000 - 0x0007ffff, 131072 bytes (32 pages)
|
|
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
|
|
0x03120000 - 0x6883ffff, 1701969920 bytes (415520 pages)
|
|
0x688a0000 - 0x688bffff, 131072 bytes (32 pages)
|
|
0x690e0000 - 0x75b3ffff, 212205568 bytes (51808 pages)
|
|
0x100000000 - 0x2847dffff, 6517817344 bytes (1591264 pages)
|
|
avail memory = 7804596224 (7443 MB)
|
|
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
|
|
ACPI MADT: BSP apic id 0
|
|
ACPI MADT: cpu id 0, acpi id 1, apic id 0
|
|
ACPI MADT: cpu id 1, acpi id 2, apic id 2
|
|
ACPI MADT: cpu id 2, acpi id 3, apic id 4
|
|
ACPI MADT: cpu id 3, acpi id 4, apic id 6
|
|
lapic: divisor index 0, frequency 12000166 Hz
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
|
|
Bits within APICID: logical_CPU_bits: 1; core_bits: 3
|
|
CPU Topology: cores_per_chip: 4; threads_per_core: 1; chips_per_package: 1;
|
|
srat_probe: can't locate SRAT
|
|
SMP: Waiting APs LAPIC initialization
|
|
SMP: CPU3 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU2 apic_initialize():
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
ACPI MADT: warning invalid intsrc irq 9 trig, level
|
|
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
|
|
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
|
|
ACPI MADT: SCI irq 9, first test level/high
|
|
IOAPIC: idx 0, apic id 1, gsi base 0, npin 120
|
|
IOAPIC: irq 1, gsi 1 -> cpu1 (auto)
|
|
IOAPIC: irq 1 -> gsi 1 edge/high
|
|
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
|
|
IOAPIC: irq 0 -> gsi 2 edge/high
|
|
IOAPIC: irq 3, gsi 3 -> cpu3 (auto)
|
|
IOAPIC: irq 3 -> gsi 3 edge/high
|
|
IOAPIC: irq 4, gsi 4 -> cpu0 (auto)
|
|
IOAPIC: irq 4 -> gsi 4 edge/high
|
|
IOAPIC: irq 5, gsi 5 -> cpu1 (auto)
|
|
IOAPIC: irq 5 -> gsi 5 edge/high
|
|
IOAPIC: irq 6, gsi 6 -> cpu2 (auto)
|
|
IOAPIC: irq 6 -> gsi 6 edge/high
|
|
IOAPIC: irq 7, gsi 7 -> cpu3 (auto)
|
|
IOAPIC: irq 7 -> gsi 7 edge/high
|
|
IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
|
|
IOAPIC: irq 8 -> gsi 8 edge/high
|
|
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
|
|
IOAPIC: irq 9 -> gsi 9 edge/high
|
|
IOAPIC: irq 10, gsi 10 -> cpu2 (auto)
|
|
IOAPIC: irq 10 -> gsi 10 edge/high
|
|
IOAPIC: irq 11, gsi 11 -> cpu3 (auto)
|
|
IOAPIC: irq 11 -> gsi 11 edge/high
|
|
IOAPIC: irq 12, gsi 12 -> cpu0 (auto)
|
|
IOAPIC: irq 12 -> gsi 12 edge/high
|
|
IOAPIC: irq 13, gsi 13 -> cpu1 (auto)
|
|
IOAPIC: irq 13 -> gsi 13 edge/high
|
|
IOAPIC: irq 14, gsi 14 -> cpu2 (auto)
|
|
IOAPIC: irq 14 -> gsi 14 edge/high
|
|
IOAPIC: irq 15, gsi 15 -> cpu3 (auto)
|
|
IOAPIC: irq 15 -> gsi 15 edge/high
|
|
IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
|
|
IOAPIC: irq 16 -> gsi 16 level/low
|
|
IOAPIC: irq 17, gsi 17 -> cpu1 (auto)
|
|
IOAPIC: irq 17 -> gsi 17 level/low
|
|
IOAPIC: irq 18, gsi 18 -> cpu2 (auto)
|
|
IOAPIC: irq 18 -> gsi 18 level/low
|
|
IOAPIC: irq 19, gsi 19 -> cpu3 (auto)
|
|
IOAPIC: irq 19 -> gsi 19 level/low
|
|
IOAPIC: irq 20, gsi 20 -> cpu0 (auto)
|
|
IOAPIC: irq 20 -> gsi 20 level/low
|
|
IOAPIC: irq 21, gsi 21 -> cpu1 (auto)
|
|
IOAPIC: irq 21 -> gsi 21 level/low
|
|
IOAPIC: irq 22, gsi 22 -> cpu2 (auto)
|
|
IOAPIC: irq 22 -> gsi 22 level/low
|
|
IOAPIC: irq 23, gsi 23 -> cpu3 (auto)
|
|
IOAPIC: irq 23 -> gsi 23 level/low
|
|
IOAPIC: irq 24, gsi 24 -> cpu0 (auto)
|
|
IOAPIC: irq 24 -> gsi 24 level/low
|
|
IOAPIC: irq 25, gsi 25 -> cpu1 (auto)
|
|
IOAPIC: irq 25 -> gsi 25 level/low
|
|
IOAPIC: irq 26, gsi 26 -> cpu2 (auto)
|
|
IOAPIC: irq 26 -> gsi 26 level/low
|
|
IOAPIC: irq 27, gsi 27 -> cpu3 (auto)
|
|
IOAPIC: irq 27 -> gsi 27 level/low
|
|
IOAPIC: irq 28, gsi 28 -> cpu0 (auto)
|
|
IOAPIC: irq 28 -> gsi 28 level/low
|
|
IOAPIC: irq 29, gsi 29 -> cpu1 (auto)
|
|
IOAPIC: irq 29 -> gsi 29 level/low
|
|
IOAPIC: irq 30, gsi 30 -> cpu2 (auto)
|
|
IOAPIC: irq 30 -> gsi 30 level/low
|
|
IOAPIC: irq 31, gsi 31 -> cpu3 (auto)
|
|
IOAPIC: irq 31 -> gsi 31 level/low
|
|
IOAPIC: irq 32, gsi 32 -> cpu0 (auto)
|
|
IOAPIC: irq 32 -> gsi 32 level/low
|
|
IOAPIC: irq 33, gsi 33 -> cpu1 (auto)
|
|
IOAPIC: irq 33 -> gsi 33 level/low
|
|
IOAPIC: irq 34, gsi 34 -> cpu2 (auto)
|
|
IOAPIC: irq 34 -> gsi 34 level/low
|
|
IOAPIC: irq 35, gsi 35 -> cpu3 (auto)
|
|
IOAPIC: irq 35 -> gsi 35 level/low
|
|
IOAPIC: irq 36, gsi 36 -> cpu0 (auto)
|
|
IOAPIC: irq 36 -> gsi 36 level/low
|
|
IOAPIC: irq 37, gsi 37 -> cpu1 (auto)
|
|
IOAPIC: irq 37 -> gsi 37 level/low
|
|
IOAPIC: irq 38, gsi 38 -> cpu2 (auto)
|
|
IOAPIC: irq 38 -> gsi 38 level/low
|
|
IOAPIC: irq 39, gsi 39 -> cpu3 (auto)
|
|
IOAPIC: irq 39 -> gsi 39 level/low
|
|
IOAPIC: irq 40, gsi 40 -> cpu0 (auto)
|
|
IOAPIC: irq 40 -> gsi 40 level/low
|
|
IOAPIC: irq 41, gsi 41 -> cpu1 (auto)
|
|
IOAPIC: irq 41 -> gsi 41 level/low
|
|
IOAPIC: irq 42, gsi 42 -> cpu2 (auto)
|
|
IOAPIC: irq 42 -> gsi 42 level/low
|
|
IOAPIC: irq 43, gsi 43 -> cpu3 (auto)
|
|
IOAPIC: irq 43 -> gsi 43 level/low
|
|
IOAPIC: irq 44, gsi 44 -> cpu0 (auto)
|
|
IOAPIC: irq 44 -> gsi 44 level/low
|
|
IOAPIC: irq 45, gsi 45 -> cpu1 (auto)
|
|
IOAPIC: irq 45 -> gsi 45 level/low
|
|
IOAPIC: irq 46, gsi 46 -> cpu2 (auto)
|
|
IOAPIC: irq 46 -> gsi 46 level/low
|
|
IOAPIC: irq 47, gsi 47 -> cpu3 (auto)
|
|
IOAPIC: irq 47 -> gsi 47 level/low
|
|
IOAPIC: irq 48, gsi 48 -> cpu0 (auto)
|
|
IOAPIC: irq 48 -> gsi 48 level/low
|
|
IOAPIC: irq 49, gsi 49 -> cpu1 (auto)
|
|
IOAPIC: irq 49 -> gsi 49 level/low
|
|
IOAPIC: irq 50, gsi 50 -> cpu2 (auto)
|
|
IOAPIC: irq 50 -> gsi 50 level/low
|
|
IOAPIC: irq 51, gsi 51 -> cpu3 (auto)
|
|
IOAPIC: irq 51 -> gsi 51 level/low
|
|
IOAPIC: irq 52, gsi 52 -> cpu0 (auto)
|
|
IOAPIC: irq 52 -> gsi 52 level/low
|
|
IOAPIC: irq 53, gsi 53 -> cpu1 (auto)
|
|
IOAPIC: irq 53 -> gsi 53 level/low
|
|
IOAPIC: irq 54, gsi 54 -> cpu2 (auto)
|
|
IOAPIC: irq 54 -> gsi 54 level/low
|
|
IOAPIC: irq 55, gsi 55 -> cpu3 (auto)
|
|
IOAPIC: irq 55 -> gsi 55 level/low
|
|
IOAPIC: irq 56, gsi 56 -> cpu0 (auto)
|
|
IOAPIC: irq 56 -> gsi 56 level/low
|
|
IOAPIC: irq 57, gsi 57 -> cpu1 (auto)
|
|
IOAPIC: irq 57 -> gsi 57 level/low
|
|
IOAPIC: irq 58, gsi 58 -> cpu2 (auto)
|
|
IOAPIC: irq 58 -> gsi 58 level/low
|
|
IOAPIC: irq 59, gsi 59 -> cpu3 (auto)
|
|
IOAPIC: irq 59 -> gsi 59 level/low
|
|
IOAPIC: irq 60, gsi 60 -> cpu0 (auto)
|
|
IOAPIC: irq 60 -> gsi 60 level/low
|
|
IOAPIC: irq 61, gsi 61 -> cpu1 (auto)
|
|
IOAPIC: irq 61 -> gsi 61 level/low
|
|
IOAPIC: irq 62, gsi 62 -> cpu2 (auto)
|
|
IOAPIC: irq 62 -> gsi 62 level/low
|
|
IOAPIC: irq 63, gsi 63 -> cpu3 (auto)
|
|
IOAPIC: irq 63 -> gsi 63 level/low
|
|
IOAPIC: irq 64, gsi 64 -> cpu0 (auto)
|
|
IOAPIC: irq 64 -> gsi 64 level/low
|
|
IOAPIC: irq 65, gsi 65 -> cpu1 (auto)
|
|
IOAPIC: irq 65 -> gsi 65 level/low
|
|
IOAPIC: irq 66, gsi 66 -> cpu2 (auto)
|
|
IOAPIC: irq 66 -> gsi 66 level/low
|
|
IOAPIC: irq 67, gsi 67 -> cpu3 (auto)
|
|
IOAPIC: irq 67 -> gsi 67 level/low
|
|
IOAPIC: irq 68, gsi 68 -> cpu0 (auto)
|
|
IOAPIC: irq 68 -> gsi 68 level/low
|
|
IOAPIC: irq 69, gsi 69 -> cpu1 (auto)
|
|
IOAPIC: irq 69 -> gsi 69 level/low
|
|
IOAPIC: irq 70, gsi 70 -> cpu2 (auto)
|
|
IOAPIC: irq 70 -> gsi 70 level/low
|
|
IOAPIC: irq 71, gsi 71 -> cpu3 (auto)
|
|
IOAPIC: irq 71 -> gsi 71 level/low
|
|
IOAPIC: irq 72, gsi 72 -> cpu0 (auto)
|
|
IOAPIC: irq 72 -> gsi 72 level/low
|
|
IOAPIC: irq 73, gsi 73 -> cpu1 (auto)
|
|
IOAPIC: irq 73 -> gsi 73 level/low
|
|
IOAPIC: irq 74, gsi 74 -> cpu2 (auto)
|
|
IOAPIC: irq 74 -> gsi 74 level/low
|
|
IOAPIC: irq 75, gsi 75 -> cpu3 (auto)
|
|
IOAPIC: irq 75 -> gsi 75 level/low
|
|
IOAPIC: irq 76, gsi 76 -> cpu0 (auto)
|
|
IOAPIC: irq 76 -> gsi 76 level/low
|
|
IOAPIC: irq 77, gsi 77 -> cpu1 (auto)
|
|
IOAPIC: irq 77 -> gsi 77 level/low
|
|
IOAPIC: irq 78, gsi 78 -> cpu2 (auto)
|
|
IOAPIC: irq 78 -> gsi 78 level/low
|
|
IOAPIC: irq 79, gsi 79 -> cpu3 (auto)
|
|
IOAPIC: irq 79 -> gsi 79 level/low
|
|
IOAPIC: irq 80, gsi 80 -> cpu0 (auto)
|
|
IOAPIC: irq 80 -> gsi 80 level/low
|
|
IOAPIC: irq 81, gsi 81 -> cpu1 (auto)
|
|
IOAPIC: irq 81 -> gsi 81 level/low
|
|
IOAPIC: irq 82, gsi 82 -> cpu2 (auto)
|
|
IOAPIC: irq 82 -> gsi 82 level/low
|
|
IOAPIC: irq 83, gsi 83 -> cpu3 (auto)
|
|
IOAPIC: irq 83 -> gsi 83 level/low
|
|
IOAPIC: irq 84, gsi 84 -> cpu0 (auto)
|
|
IOAPIC: irq 84 -> gsi 84 level/low
|
|
IOAPIC: irq 85, gsi 85 -> cpu1 (auto)
|
|
IOAPIC: irq 85 -> gsi 85 level/low
|
|
IOAPIC: irq 86, gsi 86 -> cpu2 (auto)
|
|
IOAPIC: irq 86 -> gsi 86 level/low
|
|
IOAPIC: irq 87, gsi 87 -> cpu3 (auto)
|
|
IOAPIC: irq 87 -> gsi 87 level/low
|
|
IOAPIC: irq 88, gsi 88 -> cpu0 (auto)
|
|
IOAPIC: irq 88 -> gsi 88 level/low
|
|
IOAPIC: irq 89, gsi 89 -> cpu1 (auto)
|
|
IOAPIC: irq 89 -> gsi 89 level/low
|
|
IOAPIC: irq 90, gsi 90 -> cpu2 (auto)
|
|
IOAPIC: irq 90 -> gsi 90 level/low
|
|
IOAPIC: irq 91, gsi 91 -> cpu3 (auto)
|
|
IOAPIC: irq 91 -> gsi 91 level/low
|
|
IOAPIC: irq 92, gsi 92 -> cpu0 (auto)
|
|
IOAPIC: irq 92 -> gsi 92 level/low
|
|
IOAPIC: irq 93, gsi 93 -> cpu1 (auto)
|
|
IOAPIC: irq 93 -> gsi 93 level/low
|
|
IOAPIC: irq 94, gsi 94 -> cpu2 (auto)
|
|
IOAPIC: irq 94 -> gsi 94 level/low
|
|
IOAPIC: irq 95, gsi 95 -> cpu3 (auto)
|
|
IOAPIC: irq 95 -> gsi 95 level/low
|
|
IOAPIC: irq 96, gsi 96 -> cpu0 (auto)
|
|
IOAPIC: irq 17, gsi 96 -> cpu0 (auto)
|
|
IOAPIC: irq 17 -> gsi 96 level/low
|
|
IOAPIC: irq 97, gsi 97 -> cpu1 (auto)
|
|
IOAPIC: irq 97 -> gsi 97 level/low
|
|
IOAPIC: irq 98, gsi 98 -> cpu2 (auto)
|
|
IOAPIC: irq 98 -> gsi 98 level/low
|
|
IOAPIC: irq 99, gsi 99 -> cpu3 (auto)
|
|
IOAPIC: irq 99 -> gsi 99 level/low
|
|
IOAPIC: irq 100, gsi 100 -> cpu0 (auto)
|
|
IOAPIC: irq 100 -> gsi 100 level/low
|
|
IOAPIC: irq 101, gsi 101 -> cpu1 (auto)
|
|
IOAPIC: irq 101 -> gsi 101 level/low
|
|
IOAPIC: irq 102, gsi 102 -> cpu2 (auto)
|
|
IOAPIC: irq 102 -> gsi 102 level/low
|
|
IOAPIC: irq 103, gsi 103 -> cpu3 (auto)
|
|
IOAPIC: irq 103 -> gsi 103 level/low
|
|
IOAPIC: irq 104, gsi 104 -> cpu0 (auto)
|
|
IOAPIC: irq 104 -> gsi 104 level/low
|
|
IOAPIC: irq 105, gsi 105 -> cpu1 (auto)
|
|
IOAPIC: irq 105 -> gsi 105 level/low
|
|
IOAPIC: irq 106, gsi 106 -> cpu2 (auto)
|
|
IOAPIC: irq 106 -> gsi 106 level/low
|
|
IOAPIC: irq 107, gsi 107 -> cpu3 (auto)
|
|
IOAPIC: irq 107 -> gsi 107 level/low
|
|
IOAPIC: irq 108, gsi 108 -> cpu0 (auto)
|
|
IOAPIC: irq 108 -> gsi 108 level/low
|
|
IOAPIC: irq 109, gsi 109 -> cpu1 (auto)
|
|
IOAPIC: irq 109 -> gsi 109 level/low
|
|
IOAPIC: irq 110, gsi 110 -> cpu2 (auto)
|
|
IOAPIC: irq 110 -> gsi 110 level/low
|
|
IOAPIC: irq 111, gsi 111 -> cpu3 (auto)
|
|
IOAPIC: irq 111 -> gsi 111 level/low
|
|
IOAPIC: irq 112, gsi 112 -> cpu0 (auto)
|
|
IOAPIC: irq 112 -> gsi 112 level/low
|
|
IOAPIC: irq 113, gsi 113 -> cpu1 (auto)
|
|
IOAPIC: irq 113 -> gsi 113 level/low
|
|
IOAPIC: irq 114, gsi 114 -> cpu2 (auto)
|
|
IOAPIC: irq 114 -> gsi 114 level/low
|
|
IOAPIC: irq 115, gsi 115 -> cpu3 (auto)
|
|
IOAPIC: irq 115 -> gsi 115 level/low
|
|
IOAPIC: irq 116, gsi 116 -> cpu0 (auto)
|
|
IOAPIC: irq 116 -> gsi 116 level/low
|
|
IOAPIC: irq 117, gsi 117 -> cpu1 (auto)
|
|
IOAPIC: irq 117 -> gsi 117 level/low
|
|
IOAPIC: irq 118, gsi 118 -> cpu2 (auto)
|
|
IOAPIC: irq 118 -> gsi 118 level/low
|
|
IOAPIC: irq 119, gsi 119 -> cpu3 (auto)
|
|
IOAPIC: irq 119 -> gsi 119 level/low
|
|
IOAPIC: cpu0 irq 1 reserved
|
|
IOAPIC: cpu0 irq 2 reserved
|
|
IOAPIC: cpu0 irq 3 reserved
|
|
IOAPIC: cpu0 irq 5 reserved
|
|
IOAPIC: cpu0 irq 6 reserved
|
|
IOAPIC: cpu0 irq 7 reserved
|
|
IOAPIC: cpu0 irq 10 reserved
|
|
IOAPIC: cpu0 irq 11 reserved
|
|
IOAPIC: cpu0 irq 13 reserved
|
|
IOAPIC: cpu0 irq 14 reserved
|
|
IOAPIC: cpu0 irq 15 reserved
|
|
IOAPIC: cpu1 irq 0 reserved
|
|
IOAPIC: cpu1 irq 2 reserved
|
|
IOAPIC: cpu1 irq 3 reserved
|
|
IOAPIC: cpu1 irq 4 reserved
|
|
IOAPIC: cpu1 irq 6 reserved
|
|
IOAPIC: cpu1 irq 7 reserved
|
|
IOAPIC: cpu1 irq 8 reserved
|
|
IOAPIC: cpu1 irq 9 reserved
|
|
IOAPIC: cpu1 irq 10 reserved
|
|
IOAPIC: cpu1 irq 11 reserved
|
|
IOAPIC: cpu1 irq 12 reserved
|
|
IOAPIC: cpu1 irq 14 reserved
|
|
IOAPIC: cpu1 irq 15 reserved
|
|
IOAPIC: cpu2 irq 0 reserved
|
|
IOAPIC: cpu2 irq 1 reserved
|
|
IOAPIC: cpu2 irq 2 reserved
|
|
IOAPIC: cpu2 irq 3 reserved
|
|
IOAPIC: cpu2 irq 4 reserved
|
|
IOAPIC: cpu2 irq 5 reserved
|
|
IOAPIC: cpu2 irq 7 reserved
|
|
IOAPIC: cpu2 irq 8 reserved
|
|
IOAPIC: cpu2 irq 9 reserved
|
|
IOAPIC: cpu2 irq 11 reserved
|
|
IOAPIC: cpu2 irq 12 reserved
|
|
IOAPIC: cpu2 irq 13 reserved
|
|
IOAPIC: cpu2 irq 15 reserved
|
|
IOAPIC: cpu3 irq 0 reserved
|
|
IOAPIC: cpu3 irq 1 reserved
|
|
IOAPIC: cpu3 irq 2 reserved
|
|
IOAPIC: cpu3 irq 4 reserved
|
|
IOAPIC: cpu3 irq 5 reserved
|
|
IOAPIC: cpu3 irq 6 reserved
|
|
IOAPIC: cpu3 irq 8 reserved
|
|
IOAPIC: cpu3 irq 9 reserved
|
|
IOAPIC: cpu3 irq 10 reserved
|
|
IOAPIC: cpu3 irq 12 reserved
|
|
IOAPIC: cpu3 irq 13 reserved
|
|
IOAPIC: cpu3 irq 14 reserved
|
|
IOAPIC: legacy irq max 120
|
|
ELCR Found. ISA IRQs programmed as:
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
E E E E E E E E E E E E E E E E
|
|
MPTABLE: 1:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 1:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 1:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 1:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:1 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:1 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:1 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:1 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:20 INTC -> IOAPIC 0.17
|
|
MPTABLE: 0:22 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:22 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:22 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:22 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:23 INTB -> IOAPIC 0.17
|
|
MPTABLE: 2:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 2:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 2:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 2:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:28 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:28 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:28 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:28 INTD -> IOAPIC 0.19
|
|
MPTABLE: 4:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 4:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 4:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 4:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:29 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:29 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:29 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:29 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:31 INTA -> IOAPIC 0.18
|
|
MPTABLE: 0:31 INTD -> IOAPIC 0.23
|
|
Initialize MI interrupts
|
|
MWAIT hints (2 C1 hints):
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
MWAIT deep hints:
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
C3/0 hint 0x0020
|
|
C3/1 hint 0x0021
|
|
C4/0 hint 0x0030
|
|
C4/1 hint 0x0031
|
|
C4/2 hint 0x0032
|
|
C4/3 hint 0x0033
|
|
C5/0 hint 0x0040
|
|
objcache: magazine cap [6, 134]
|
|
Finish MP startup
|
|
Active CPU Mask: 000000000000000f
|
|
TSC testing MP synchronization ...
|
|
cpu0: TSC testing MP synchronization ...
|
|
cpu0: TSC is MP synchronized after 59197 tries
|
|
cpu1: TSC testing MP synchronization ...
|
|
cpu2: TSC testing MP synchronization ...
|
|
cpu3: TSC testing MP synchronization ...
|
|
cpu1: TSC is MP synchronized after 50000 tries
|
|
cpu3: TSC is MP synchronized after 50000 tries
|
|
cpu2: TSC is MP synchronized after 50000 tries
|
|
TSC is MP synchronized
|
|
TSC: cputimer freq 99753094, shift 5
|
|
Preloaded elf kernel "kernel" at 0xffffffff8294d000.
|
|
Preloaded elf obj module "acpi.ko" at 0xffffffff8294d860.
|
|
Preloaded elf obj module "ehci.ko" at 0xffffffff8294e2b8.
|
|
Preloaded elf obj module "xhci.ko" at 0xffffffff8294ebd0.
|
|
VMM: available, disabled by default
|
|
Start usched_dfly helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
start dummy scheduler helpers on cpus: 0 1 2 3
|
|
Start usched_bsd4 helpers on cpus:
|
|
cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3)
|
|
sensors: tasks default to cpu3
|
|
wdog: In-kernel automatic watchdog reset enabled
|
|
ath_dfs: WTF module
|
|
wlan: <802.11 Link Layer>
|
|
ath_rate: <SampleRate bit-rate selection algorithm>
|
|
kbd: new array size 4
|
|
kbd1 at kbdmux0
|
|
md0: Malloc disk
|
|
md0: invalid primary partition table: no magic
|
|
crypto: <crypto core>
|
|
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
|
|
hpt27xx: RocketRAID 27xx controller driver v1.0
|
|
interrupt uses mplock: swi_taskq
|
|
IOAPIC: rman cpu0 0 - 0
|
|
IOAPIC: rman cpu0 4 - 4
|
|
IOAPIC: rman cpu0 8 - 9
|
|
IOAPIC: rman cpu0 12 - 12
|
|
IOAPIC: rman cpu0 16 - 95
|
|
IOAPIC: rman cpu0 97 - 191
|
|
IOAPIC: rman cpu1 1 - 1
|
|
IOAPIC: rman cpu1 5 - 5
|
|
IOAPIC: rman cpu1 13 - 13
|
|
IOAPIC: rman cpu1 16 - 95
|
|
IOAPIC: rman cpu1 97 - 191
|
|
IOAPIC: rman cpu2 6 - 6
|
|
IOAPIC: rman cpu2 10 - 10
|
|
IOAPIC: rman cpu2 14 - 14
|
|
IOAPIC: rman cpu2 16 - 95
|
|
IOAPIC: rman cpu2 97 - 191
|
|
IOAPIC: rman cpu3 3 - 3
|
|
IOAPIC: rman cpu3 7 - 7
|
|
IOAPIC: rman cpu3 11 - 11
|
|
IOAPIC: rman cpu3 15 - 95
|
|
IOAPIC: rman cpu3 97 - 191
|
|
ACPI: RSDP 0x00000000772DD000 000024 (v02 DELL )
|
|
ACPI: XSDT 0x00000000772DD0A8 0000D4 (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FACP 0x00000000772FE7D8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: DSDT 0x00000000772DD210 0215C8 (v02 DELL CBX3 01072009 INTL 20120913)
|
|
ACPI: FACS 0x0000000077ABEF80 000040
|
|
ACPI: APIC 0x00000000772FE8E8 000084 (v03 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FPDT 0x00000000772FE970 000044 (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: FIDT 0x00000000772FE9B8 00009C (v01 DELL CBX3 01072009 AMI 00010013)
|
|
ACPI: MCFG 0x00000000772FEA58 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
|
|
ACPI: HPET 0x00000000772FEA98 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
|
|
ACPI: SSDT 0x00000000772FEAD0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000772FEE40 0053B2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
|
|
ACPI: UEFI 0x00000000773041F8 000042 (v01 00000000 00000000)
|
|
ACPI: LPIT 0x0000000077304240 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
|
|
ACPI: SSDT 0x00000000773042D8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
|
|
ACPI: SSDT 0x0000000077304520 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000773070D0 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
|
|
ACPI: DBGP 0x0000000077307D18 000034 (v01 INTEL 00000000 MSFT 0000005F)
|
|
ACPI: DBG2 0x0000000077307D50 000054 (v00 INTEL 00000000 MSFT 0000005F)
|
|
ACPI: SSDT 0x0000000077307DA8 000613 (v02 INTEL DELL__MT 00000000 INTL 20120913)
|
|
ACPI: SSDT 0x00000000773083C0 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
|
|
ACPI: MSDM 0x0000000077309218 000055 (v03 DELL CBX3 06222004 AMI 00010013)
|
|
ACPI: SLIC 0x0000000077309270 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
|
|
ACPI: BGRT 0x00000000773093E8 000038 (v00 ?? 01072009 AMI 00010013)
|
|
ACPI: DMAR 0x0000000077309420 000070 (v01 INTEL SKL 00000001 INTL 00000001)
|
|
ACPI: ASF! 0x0000000077309490 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
|
|
cryptosoft0.nexus0.root0
|
|
cryptosoft0: <software crypto> [tentative] on motherboard
|
|
crypto: assign cryptosoft0 driver id 0, flags 234881024
|
|
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
|
|
cryptosoft0: <software crypto> [attached!] on motherboard
|
|
aesni0.nexus0.root0
|
|
aesni0: <AES-CBC,AES-XTS> [tentative] on motherboard
|
|
crypto: assign aesni0 driver id 1, flags 16777216
|
|
crypto: aesni0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: aesni0 registers alg 22 flags 0 maxoplen 0
|
|
aesni0: <AES-CBC,AES-XTS> [attached!] on motherboard
|
|
padlock0: No ACE support.
|
|
rdrand0.nexus0.root0
|
|
rdrand0: <RdRand RNG> [tentative] on motherboard
|
|
rdrand0: <RdRand RNG> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <DELL CBX3 > [tentative] on motherboard
|
|
ACPI: Executed 21 blocks of module-level executable AML code
|
|
ACPI: 8 ACPI AML tables successfully acquired and loaded
|
|
PCIe: Memory Mapped configuration base @ 0xe0000000, bus [0, 255]
|
|
PCIe: Using Memory Mapped configuration
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI testing level/high
|
|
IOAPIC: irq 9, gsi 9 edge/high -> level/high
|
|
ACPI FADT: SCI select level/high
|
|
acpi0: Power Button (fixed)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0 [tentative] on acpi0
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 4, width = 2
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] on acpi0
|
|
acpi_hpet0.acpi0.nexus0.root0
|
|
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: vend: 0x8086, rev: 0x1, num: 7, opts: legacy_route 64-bit
|
|
acpi_hpet0: frequency 24000000
|
|
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
pci_link0: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 7 12
|
|
Validation 0 7 N 0 7 12
|
|
After Disable 0 255 N 0 7 12
|
|
pci_link1: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 3 10
|
|
Validation 0 10 N 0 3 10
|
|
After Disable 0 255 N 0 3 10
|
|
pci_link2: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 5 N 0 4 5
|
|
Validation 0 5 N 0 4 5
|
|
After Disable 0 255 N 0 4 5
|
|
pci_link3: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 6 11
|
|
Validation 0 11 N 0 6 11
|
|
After Disable 0 255 N 0 6 11
|
|
pci_link4: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 7 11
|
|
Validation 0 7 N 0 7 11
|
|
After Disable 0 255 N 0 7 11
|
|
pci_link5: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 3 N 0 3 10
|
|
Validation 0 3 N 0 3 10
|
|
After Disable 0 255 N 0 3 10
|
|
pci_link6: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 4 N 0 4 5
|
|
Validation 0 4 N 0 4 5
|
|
After Disable 0 255 N 0 4 5
|
|
pci_link7: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 6 12
|
|
Validation 0 255 N 0 6 12
|
|
After Disable 0 255 N 0 6 12
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
pcib0.acpi0.nexus0.root0
|
|
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
|
|
pci0.pcib0.acpi0.nexus0.root0
|
|
pci0: <ACPI PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x191f, revid=0x07
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x1901, revid=0x07
|
|
domain=0, bus=0, slot=1, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x00142580
|
|
pcib0: matched entry for 0.1.INTA
|
|
pcib0: slot 1 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa12f, revid=0x31
|
|
domain=0, bus=0, slot=20, func=0
|
|
class=0c-03-30, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 8 messages, 64 bit
|
|
map[10]: type Memory, range 64, base 0xdff20000, size 16, enabled
|
|
pcib0: matched entry for 0.20.INTC
|
|
pcib0: slot 20 INTC hardwired to GSI 18, IRQ 18
|
|
unknown: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdff20000
|
|
xhci early: SMM active, request owner change
|
|
xhci early: handover successful
|
|
found-> vendor=0x8086, dev=0xa131, revid=0x31
|
|
domain=0, bus=0, slot=20, func=2
|
|
class=11-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0102, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type Memory, range 64, base 0xdff3b000, size 12, enabled
|
|
pcib0: matched entry for 0.20.INTC
|
|
pcib0: slot 20 INTC hardwired to GSI 18, IRQ 18
|
|
found-> vendor=0x8086, dev=0xa13a, revid=0x31
|
|
domain=0, bus=0, slot=22, func=0
|
|
class=07-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 64, base 0xdff3a000, size 12, memory disabled
|
|
pcib0: matched entry for 0.22.INTA
|
|
pcib0: slot 22 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa13d, revid=0x31
|
|
domain=0, bus=0, slot=22, func=3
|
|
class=07-00-02, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x00b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type I/O Port, range 32, base 0xf060, size 3, port disabled
|
|
map[14]: type Memory, range 32, base 0xdff39000, size 12, memory disabled
|
|
pcib0: matched entry for 0.22.INTD
|
|
pcib0: slot 22 INTD hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0xa102, revid=0x31
|
|
domain=0, bus=0, slot=23, func=0
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type Memory, range 32, base 0xdff34000, size 13, enabled
|
|
map[14]: type Memory, range 32, base 0xdff38000, size 8, enabled
|
|
map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
|
|
map[24]: type Memory, range 32, base 0xdff37000, size 11, enabled
|
|
pcib0: matched entry for 0.23.INTB
|
|
pcib0: slot 23 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0xa110, revid=0xf1
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x001cb200
|
|
pcib0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa118, revid=0xf1
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024fd00
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0xa146, revid=0x31
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0xa121, revid=0x31
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=05-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
map[10]: type Memory, range 32, base 0xdff30000, size 14, enabled
|
|
found-> vendor=0x8086, dev=0xa123, revid=0x31
|
|
domain=0, bus=0, slot=31, func=4
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
map[10]: type Memory, range 64, base 0xdff36000, size 8, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
|
|
pcib0: matched entry for 0.31.INTA
|
|
pcib0: slot 31 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x15b7, revid=0x31
|
|
domain=0, bus=0, slot=31, func=6
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 32, base 0xdff00000, size 17, enabled
|
|
pcib0: matched entry for 0.31.INTD
|
|
pcib0: slot 31 INTD hardwired to GSI 19, IRQ 19
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 1.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xe000-0xefff
|
|
pcib1: memory decode 0xdfe00000-0xdfefffff
|
|
pcib1: prefetched decode 0xc0000000-0xcfffffff
|
|
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
found-> vendor=0x1002, dev=0x6610, revid=0x83
|
|
domain=0, bus=1, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
|
|
pcib1: requested memory range 0xc0000000-0xcfffffff: good
|
|
map[18]: type Memory, range 64, base 0xdfe00000, size 18, enabled
|
|
pcib1: requested memory range 0xdfe00000-0xdfe3ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled
|
|
pcib1: requested I/O range 0xe000-0xe0ff: in range
|
|
pcib1: matched entry for 1.0.INTA
|
|
pcib1: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x1002, dev=0xaab0, revid=0x00
|
|
domain=0, bus=1, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xdfe60000, size 14, enabled
|
|
pcib1: requested memory range 0xdfe60000-0xdfe63fff: good
|
|
pcib1: matched entry for 1.0.INTB
|
|
pcib1: slot 0 INTB hardwired to GSI 17, IRQ 17
|
|
vgapci0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0xe000-0xe0ff mem 0xdfe00000-0xdfe3ffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1
|
|
vgapci0: Boot video device
|
|
vgapci0: <VGA-compatible display> [attached!] port 0xe000-0xe0ff mem 0xdfe00000-0xdfe3ffff,0xc0000000-0xcfffffff irq 16 at device 0.0 on pci1
|
|
pci1: <multimedia, HDA> (vendor 0x1002, dev 0xaab0) at device 0.1 irq 17
|
|
pci1: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 1.0 on pci0
|
|
xhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
xhci0: <XHCI (generic) USB 3.0 controller> [tentative] mem 0xdff20000-0xdff2ffff irq 18 at device 20.0 on pci0
|
|
xhci0: 32 bytes context size, 64-bit DMA
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
xhci0: attempting to allocate 1 MSI vector (8 supported)
|
|
alloc MSI intr 18 on cpu0
|
|
xhci0: using IRQ 18 on cpu0 for MSI
|
|
map MSI intr 18 on cpu0
|
|
usbus0.xhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus0 [tentative] on xhci0
|
|
xhci0: usbpf: Attached
|
|
usbus0 [attached!] on xhci0
|
|
xhci0: <XHCI (generic) USB 3.0 controller> [attached!] mem 0xdff20000-0xdff2ffff irq 18,18 at device 20.0 on pci0
|
|
usbus0: 5.0Gbps Super Speed USB v3.0
|
|
pci0: <dasp> (vendor 0x8086, dev 0xa131) at device 20.2 irq 18
|
|
pci0: <simple comms> (vendor 0x8086, dev 0xa13a) at device 22.0 irq 16
|
|
pci0: <simple comms, UART> (vendor 0x8086, dev 0xa13d) at device 22.3 irq 19
|
|
ahci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057 mem 0xdff37000-0xdff377ff,0xdff38000-0xdff380ff,0xdff34000-0xdff35fff irq 17 at device 23.0 on pci0
|
|
ahci0: attempting to allocate 1 MSI vector (1 supported)
|
|
alloc MSI intr 16 on cpu1
|
|
ahci0: using IRQ 16 on cpu1 for MSI
|
|
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xdff37000
|
|
ugen0.1: <0x8086> at usbus0
|
|
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
|
|
ahci0: AE did not auto-clear!
|
|
ahci0: Intel hocus pocus
|
|
ahci0: AHCI 1.3.1 cap 0xe734ff43<S64A,NCQ,SSNTF,SALP,SAL,SCLO,SAM,PMD,SSC,PSC,EMS> cap2 0x3c<DESO,SADM,SDS,APST>, 4 ports, 32 tags/port, gen 3 (6Gbps)
|
|
ahci0.0: START HARDRESET
|
|
ahci0.1: START HARDRESET
|
|
ahci0.2: START HARDRESET
|
|
ahci0.3: START HARDRESET
|
|
map MSI intr 16 on cpu1
|
|
uhub0: 26 ports with 26 removable, self powered
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
alignment check failed
|
|
alignment check failed
|
|
ugen0.2: <Unicomp Inc> at usbus0
|
|
ukbd0: <Boot Ifc Keyboard> on usbus0
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
|
|
ahci0.1: END HARDRESET 0
|
|
ahci0.0: END HARDRESET 0
|
|
ahci0.1: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.0: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.0: SIG 00000101
|
|
ahci0.1: SIG eb140101
|
|
ahci0.0: END SOFTRESET
|
|
ahci0.1: END SOFTRESET
|
|
ahci0.0: Found DISK "ST500DM002-1BD142 KC48" serial="Z6EN1ZZ0"
|
|
ahci0.0: tags=32/32 satacap=850e satacap2=0006 satafea=0048 NCQ=YES capacity=476940.02MB
|
|
ahci0.0: f85=3469 f86=be41 f87=4163 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.0: Set dummy xfer mode to 46
|
|
ahci0.1: Found ATAPI "PLDS DVD+/-RW DU-8A5LH DD11" serial="YYCRW7363957O62CVA03"
|
|
ahci0.1: tags=0/32 satacap=0202 satacap2=0010 satafea=0068 NCQ=NO capacity=1.00MB
|
|
ahci0.1: f85=4210 f86=1000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
|
|
ahci0.1: Set dummy xfer mode to 46
|
|
ahci0.1: TFES slot 5 ci_saved = 00000020
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
(probe0:ahci0:1:0:0): Down reving Protocol Version from 2 to 0?
|
|
ahci0.1: TFES slot 7 ci_saved = 00000080
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.2: Port appears to be unplugged
|
|
ahci0.3: Port appears to be unplugged
|
|
ahci0.3: No device detected
|
|
ahci0.2: No device detected
|
|
ahci0.3: END HARDRESET 19
|
|
ahci0.2: END HARDRESET 19
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057 mem 0xdff37000-0xdff377ff,0xdff38000-0xdff380ff,0xdff34000-0xdff35fff irq 16,17 at device 23.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 3
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: no prefetched decode
|
|
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
found-> vendor=0x104c, dev=0x8240, revid=0x00
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x12 (4500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
PCI Express ver.2 cap=0x0072[PCIE2PCI]
|
|
pcib3.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] at device 0.0 on pci2
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0xfff000-0xfff
|
|
pcib3: no prefetched decode
|
|
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.RP01.PXSX - AE_NOT_FOUND
|
|
pci3.pcib3.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] at device 0.0 on pci2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 29.0 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0xd000-0xdfff
|
|
pcib4: memory decode 0xdfd00000-0xdfdfffff
|
|
pcib4: prefetched decode 0xb0000000-0xbfffffff
|
|
pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x1002, dev=0x6771, revid=0x00
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xb0000000, size 28, memory disabled
|
|
pcib4: requested memory range 0xb0000000-0xbfffffff: good
|
|
map[18]: type Memory, range 64, base 0xdfd20000, size 17, enabled
|
|
pcib4: requested memory range 0xdfd20000-0xdfd3ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xd000, size 8, port disabled
|
|
pcib4: requested I/O range 0xd000-0xd0ff: in range
|
|
pcib4: matched entry for 4.0.INTA
|
|
pcib4: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x1002, dev=0xaa98, revid=0x00
|
|
domain=0, bus=4, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xdfd40000, size 14, memory disabled
|
|
pcib4: requested memory range 0xdfd40000-0xdfd43fff: good
|
|
pcib4: matched entry for 4.0.INTB
|
|
pcib4: slot 0 INTB hardwired to GSI 17, IRQ 17
|
|
vgapci1.pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci1: <VGA-compatible display> [tentative] port 0xd000-0xd0ff mem 0xdfd20000-0xdfd3ffff,0xb0000000-0xbfffffff irq 16 at device 0.0 on pci4
|
|
vgapci1: <VGA-compatible display> [attached!] port 0xd000-0xd0ff mem 0xdfd20000-0xdfd3ffff,0xb0000000-0xbfffffff irq 16 at device 0.0 on pci4
|
|
pci4: <multimedia, HDA> (vendor 0x1002, dev 0xaa98) at device 0.1 irq 17
|
|
pci4: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 29.0 on pci0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
pci0: <memory> (vendor 0x8086, dev 0xa121) at device 31.2
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0xa123) at device 31.4 irq 16
|
|
em0.pci0.pcib0.acpi0.nexus0.root0
|
|
em0: <Intel(R) PRO/1000 Network Connection PCH_SPT_I219_LM2 7.4.2> [tentative] mem 0xdff00000-0xdff1ffff irq 19 at device 31.6 on pci0
|
|
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdff00000
|
|
em0: IRQ shared
|
|
em0: bpf attached
|
|
em0: MAC address: 64:00:6a:11:aa:e8
|
|
em0: <Intel(R) PRO/1000 Network Connection PCH_SPT_I219_LM2 7.4.2> [attached!] mem 0xdff00000-0xdff1ffff irq 19 at device 31.6 on pci0
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Sleep Button> [tentative] on acpi0
|
|
acpi_button0: <Sleep Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
acpi_button1.acpi0.nexus0.root0
|
|
acpi_button1: <Power Button> [tentative] on acpi0
|
|
acpi_button1: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi_tz0.acpi0.nexus0.root0
|
|
acpi_tz0: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz0: <Thermal Zone> [attached!] on acpi0
|
|
acpi_tz1.acpi0.nexus0.root0
|
|
acpi_tz1: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz1: <Thermal Zone> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: irq maps: 0x1 0x11 0x11 0x11
|
|
sio0.acpi0.nexus0.root0
|
|
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
atkbdc0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0.atkbdc0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
|
|
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
|
|
psm0: current command byte:006d
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF813ADB7AC0 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF81EE123F80 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst0: non-C3 0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: create pkg domain0, coord 0xfe
|
|
cpu_pst0: control reg 127 0
|
|
cpu_pst0: status reg 127 0
|
|
cpu_pst0: freq 3201, pwr 65000, xlat 10, blat 10, cv 00002400, sv 00002400
|
|
cpu_pst0: freq 3200, pwr 65000, xlat 10, blat 10, cv 00002000, sv 00002000
|
|
cpu_pst0: freq 3000, pwr 59079, xlat 10, blat 10, cv 00001e00, sv 00001e00
|
|
cpu_pst0: freq 2900, pwr 56516, xlat 10, blat 10, cv 00001d00, sv 00001d00
|
|
cpu_pst0: freq 2700, pwr 51532, xlat 10, blat 10, cv 00001b00, sv 00001b00
|
|
cpu_pst0: freq 2500, pwr 46744, xlat 10, blat 10, cv 00001900, sv 00001900
|
|
cpu_pst0: freq 2300, pwr 41545, xlat 10, blat 10, cv 00001700, sv 00001700
|
|
cpu_pst0: freq 2200, pwr 39313, xlat 10, blat 10, cv 00001600, sv 00001600
|
|
cpu_pst0: freq 2000, pwr 34990, xlat 10, blat 10, cv 00001400, sv 00001400
|
|
cpu_pst0: freq 1800, pwr 30835, xlat 10, blat 10, cv 00001200, sv 00001200
|
|
cpu_pst0: freq 1700, pwr 28823, xlat 10, blat 10, cv 00001100, sv 00001100
|
|
cpu_pst0: freq 1500, pwr 24402, xlat 10, blat 10, cv 00000f00, sv 00000f00
|
|
cpu_pst0: freq 1300, pwr 20687, xlat 10, blat 10, cv 00000d00, sv 00000d00
|
|
cpu_pst0: freq 1100, pwr 17137, xlat 10, blat 10, cv 00000b00, sv 00000b00
|
|
cpu_pst0: freq 1000, pwr 15427, xlat 10, blat 10, cv 00000a00, sv 00000a00
|
|
cpu_pst0: freq 800, pwr 12119, xlat 10, blat 10, cv 00000800, sv 00000800
|
|
cpu_pst0: _PPC 0
|
|
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
|
|
clockmod0.cpu0.acpi0.nexus0.root0
|
|
clockmod0: <CPU clock modulation> [tentative] on cpu0
|
|
clock modulation:
|
|
0x0000 100.00%
|
|
0x001f 93.75%
|
|
0x001e 87.50%
|
|
0x001d 81.25%
|
|
0x001c 75.00%
|
|
0x001b 68.75%
|
|
0x001a 62.50%
|
|
0x0019 56.25%
|
|
0x0018 50.00%
|
|
0x0017 43.75%
|
|
0x0016 37.50%
|
|
0x0015 31.25%
|
|
0x0014 25.00%
|
|
0x0013 18.75%
|
|
0x0012 12.50%
|
|
0x0011 6.25%
|
|
clockmod0: <CPU clock modulation> [attached!] on cpu0
|
|
perfbias0.cpu0.acpi0.nexus0.root0
|
|
perfbias0: <CPU perf-energy bias> [tentative] on cpu0
|
|
perfbias0: <CPU perf-energy bias> [attached!] on cpu0
|
|
coretemp0.cpu0.acpi0.nexus0.root0
|
|
coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
|
|
coretemp0: Setting TjMax=100
|
|
coretemp0: pkg master cpu3
|
|
coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF81ED705A80 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFF8061618060 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst1: non-C3 0
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1.cpu1.acpi0.nexus0.root0
|
|
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
|
|
cpu_pst1: control reg 127 0
|
|
cpu_pst1: status reg 127 0
|
|
cpu_pst1: _PPC 0
|
|
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
|
|
clockmod1.cpu1.acpi0.nexus0.root0
|
|
clockmod1: <CPU clock modulation> [tentative] on cpu1
|
|
clockmod1: <CPU clock modulation> [attached!] on cpu1
|
|
perfbias1.cpu1.acpi0.nexus0.root0
|
|
perfbias1: <CPU perf-energy bias> [tentative] on cpu1
|
|
perfbias1: <CPU perf-energy bias> [attached!] on cpu1
|
|
coretemp1.cpu1.acpi0.nexus0.root0
|
|
coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
|
|
coretemp1: Setting TjMax=100
|
|
coretemp1: pkg master cpu3
|
|
coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst2.cpu2.acpi0.nexus0.root0
|
|
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst2: non-C3 0
|
|
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
|
|
cpu_pst2.cpu2.acpi0.nexus0.root0
|
|
cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
|
|
cpu_pst2: control reg 127 0
|
|
cpu_pst2: status reg 127 0
|
|
cpu_pst2: _PPC 0
|
|
cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
|
|
clockmod2.cpu2.acpi0.nexus0.root0
|
|
clockmod2: <CPU clock modulation> [tentative] on cpu2
|
|
clockmod2: <CPU clock modulation> [attached!] on cpu2
|
|
perfbias2.cpu2.acpi0.nexus0.root0
|
|
perfbias2: <CPU perf-energy bias> [tentative] on cpu2
|
|
perfbias2: <CPU perf-energy bias> [attached!] on cpu2
|
|
coretemp2.cpu2.acpi0.nexus0.root0
|
|
coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
|
|
coretemp2: Setting TjMax=100
|
|
coretemp2: pkg master cpu3
|
|
coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst3.cpu3.acpi0.nexus0.root0
|
|
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
cpu_cst3: non-C3 0
|
|
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
|
|
cpu_pst3.cpu3.acpi0.nexus0.root0
|
|
cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
|
|
cpu_pst3: control reg 127 0
|
|
cpu_pst3: status reg 127 0
|
|
cpu_pst3: _PPC 0
|
|
cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
|
|
clockmod3.cpu3.acpi0.nexus0.root0
|
|
clockmod3: <CPU clock modulation> [tentative] on cpu3
|
|
clockmod3: <CPU clock modulation> [attached!] on cpu3
|
|
perfbias3.cpu3.acpi0.nexus0.root0
|
|
perfbias3: <CPU perf-energy bias> [tentative] on cpu3
|
|
perfbias3: <CPU perf-energy bias> [attached!] on cpu3
|
|
coretemp3.cpu3.acpi0.nexus0.root0
|
|
coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
|
|
coretemp3: Setting TjMax=100
|
|
coretemp3: pkg master cpu3
|
|
coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ACPI: Enabled 5 GPEs in block 00 to 7F
|
|
acpi0: <DELL CBX3 > [attached!] at port 0xff00-0xfffe,0x1854-0x1857,0x800-0x87f,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x680-0x69f,0xffff,0xffff,0xffff,0x1800-0x18fe,0x164e-0x164f,0xa00-0xa3f,0xa40-0xa7f iomem 0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xff000000-0xffffffff,0xfee00000-0xfeefffff,0xdffe0000-0xdfffffff irq 9 on motherboard
|
|
atkbdc-: atkbdc0 exists, using next available unit number
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
orm0: <ISA Option ROMs> [tentative] at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
|
|
orm0: <ISA Option ROMs> [attached!] at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
atkbdc1 [tentative] failed to probe at port 0x60 on isa0
|
|
vga0 [tentative] failed to probe on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x500 on isa0
|
|
cpu_cst: global Cx count 3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
sc0: EFI_FB <16 virtual consoles, flags=0x700>
|
|
sc0:, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x500 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0: wbsio_probe port 0x2e: Device ID 0x00, Rev 0x00
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
lnc0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
usbpf: Initialized
|
|
crypto: <crypto device>
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C4 sub state 3
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x40, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C5 sub state 0
|
|
lo0: bpf attached
|
|
hptrr: no controller detected.
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 4 busses
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: Finished configuring bus: ahci0
|
|
ahci0.1: TFES slot 8 ci_saved = 00000100
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.1: TFES slot 11 ci_saved = 00000800
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: finished configuring all busses
|
|
da0: si_iosize_max:131072
|
|
da0 at ahci0 bus 0 target 0 lun 0
|
|
da0: <SATA ST500DM002-1BD14 KC48> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number Z6EN1ZZ0
|
|
da0: 600.000MB/s transfers
|
|
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
|
|
ahci0.1: TFES slot 13 ci_saved = 00002000
|
|
ahci0.1: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
|
|
ahci0.1: Shortening sense request
|
|
cd0 at ahci0 bus 1 target 0 lun 0
|
|
cd0: <PLDS DVD+-RW DU-8A5LH DD11> Removable CD-ROM SCSI-0 device
|
|
cd0: 150.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
|
|
da0: Found GPT in slice #1
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:serno/Z6EN1ZZ0.s1d
|
|
HAMMER(ROOT) recovery check seqno=0010d617
|
|
HAMMER(ROOT) recovery range 3000000001823e38-3000000001823e38
|
|
HAMMER(ROOT) recovery nexto 3000000001823e38 endseqno=0010d618
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 6160k, remaining available: 131072k
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
HAMMER(BUILD) recovery check seqno=0010020f
|
|
HAMMER(BUILD) recovery range 30000000000331b0-30000000000331b0
|
|
HAMMER(BUILD) recovery nexto 30000000000331b0 endseqno=00100210
|
|
HAMMER(BUILD) mounted clean, no recovery needed
|
|
kthread 0xffffff813a5d5580 syncer7 has exited
|
|
kthread 0xffffff81dd3c6380 syncer8 has exited
|
|
kthread 0xffffff82f7c59200 syncer9 has exited
|
|
kthread 0xffffff81dd3c6380 syncer10 has exited
|
|
kthread 0xffffff82f7c58700 syncer11 has exited
|
|
kthread 0xffffff813a5d5580 syncer12 has exited
|
|
em0: Link is up 100 Mbps Full Duplex, Flow control: rxpause
|
|
em0: Link is Down
|
|
em0: Link is up 100 Mbps Full Duplex, Flow control: rxpause
|
|
swap low/high-water marks set to 167769/251654
|