Project

General

Profile

Bug #1101 » dmesg.config

polachok, 08/01/2008 01:14 PM

 
1
Copyright (c) 2003-2008 The DragonFly Project.
2
Copyright (c) 1992-2003 The FreeBSD Project.
3
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
4
	The Regents of the University of California. All rights reserved.
5
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
6
    root@test12.backplane.com:/usr/obj/usr/src/sys/GENERIC
7
TSC clock: 799977770 Hz, i8254 clock: 1193146 Hz
8
CPU: Mobile AMD Sempron(tm) Processor 3300+ (800.01-MHz 686-class CPU)
9
  Origin = "AuthenticAMD"  Id = 0x20fc2  Stepping = 2
10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
11
  Features2=0x1<SSE3>
12
  AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
13
real memory  = 468320256 (457344K bytes)
14
FreeBSD Kernel Configuration Utility - Version 1.2
15
 Type "help" for help or "visual" to go to the visual
16
 configuration interface (requires MGA/VGA display or
17
 serial terminal capable of displaying ANSI graphics).
18
config> flags atkbd0 0
19
config> quit
20
avail memory = 440541184 (430216K bytes)
21
Preloaded elf kernel "/kernel" at 0xc083c000.
22
Preloaded elf module "/modules/vesa.ko" at 0xc083c294.
23
Preloaded elf module "/modules/if_ath.ko" at 0xc083c33c.
24
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
25
Preloaded elf module "/modules/ath_hal.ko" at 0xc083c3e4.
26
Preloaded elf module "/modules/ath_rate.ko" at 0xc083c48c.
27
Preloaded elf module "/modules/if_rl.ko" at 0xc083c538 (ignored, already in static kernel)
28
Preloaded elf module "/modules/miibus.ko" at 0xc083c5e0 (ignored, already in static kernel)
29
Preloaded elf module "/modules/snd_atiixp.ko" at 0xc083c688.
30
Preloaded elf module "/modules/sound.ko" at 0xc083c734.
31
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc083c7dc.
32
Preloaded elf module "/modules/acpi.ko" at 0xc083c824.
33
Pentium Pro MTRR support enabled
34
md0: Malloc disk
35
pcibios: BIOS version 2.10
36
ACPI: RSDP @ 0x0xf7ed0/0x0014 (v  0 PTLTD )
37
ACPI: RSDT @ 0x0x1beaa446/0x0034 (v  1 PTLTD    RSDT   0x06040000  LTP 0x00000000)
38
ACPI: FACP @ 0x0x1beaedff/0x0074 (v  1 FUJ    W37      0x06040000 W37  0x000F4240)
39
ACPI: DSDT @ 0x0x1beaa47a/0x4985 (v  1 FUJ    W37      0x06040000 MSFT 0x0100000E)
40
ACPI: FACS @ 0x0x1beaffc0/0x0040
41
ACPI: SSDT @ 0x0x1beaee73/0x00F7 (v  1 PTLTD  POWERNOW 0x06040000  LTP 0x00000001)
42
ACPI: APIC @ 0x0x1beaef6a/0x005A (v  1 PTLTD  	 APIC   0x06040000  LTP 0x00000000)
43
ACPI: MCFG @ 0x0x1beaefc4/0x003C (v  1 PTLTD    MCFG   0x06040000  LTP 0x00000000)
44
npx0: <math processor> on motherboard
45
npx0: INT 16 interface
46
Using XMM optimized bcopy/copyin/copyout
47
acpi0: <PTLTD   RSDT> on motherboard
48
ACPI: DSDT was overridden.
49
ACPI: Table DSDT replaced by host OS
50
ACPI: DSDT @ 0x0/0x4189 (v  1 FUJ    W37      0x06040000 INTL 0x20061109)
51
acpi0: Power Button (fixed)
52
Warning: ACPI is disabling APM's device.  You can't run both
53
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x66,0x62 on acpi0
54
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
55
cpu0: <ACPI CPU (3 Cx states)> on acpi0
56
acpi_tz0: <Thermal Zone> on acpi0
57
acpi_tz1: <Thermal Zone> on acpi0
58
acpi_lid0: <Control Method Lid Switch> on acpi0
59
acpi_button0: <Sleep Button> on acpi0
60
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
61
atkbd0: <AT Keyboard> irq 1 on atkbdc0
62
kbd0 at atkbd0
63
psm0: failed to get data.
64
psm0: failed to get status.
65
psm0: <PS/2 Mouse> irq 12 on atkbdc0
66
psm0: model Generic PS/2 mouse, device ID 0
67
acpi_cmbat0: <Control Method Battery> on acpi0
68
acpi_acad0: <AC Adapter> on acpi0
69
legacypci0 on motherboard
70
pcib0: <Host to PCI bridge> on legacypci0
71
pci0: <PCI bus> on pcib0
72
pcib1: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0
73
pci1: <PCI bus> on pcib1
74
pci1: <ATI model 5955 graphics accelerator> at 5.0 irq 11
75
ohci0: <ATI SB400 USB Controller> mem 0xd0000000-0xd0000fff irq 11 at device 19.0 on pci0
76
usb0: OHCI version 1.0, legacy support
77
usb0: SMM does not respond, resetting
78
sched_ithd: stray interrupt 7 on cpu 0
79
sched_ithd: stray interrupt 7 on cpu 0
80
sched_ithd: stray interrupt 7 on cpu 0
81
sched_ithd: stray interrupt 7 on cpu 0
82
sched_ithd: stray interrupt 7 on cpu 0
83
sched_ithd: stray interrupt 7 on cpu 0
84
sched_ithd: stray interrupt 7 on cpu 0
85
sched_ithd: stray interrupt 7 on cpu 0
86
sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports
87
usb0: <ATI SB400 USB Controller> on ohci0
88
usb0: USB revision 1.0
89
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
90
uhub0: 4 ports with 4 removable, self powered
91
ohci1: <ATI SB400 USB Controller> mem 0xd0001000-0xd0001fff irq 11 at device 19.1 on pci0
92
usb1: OHCI version 1.0, legacy support
93
usb1: SMM does not respond, resetting
94
usb1: <ATI SB400 USB Controller> on ohci1
95
usb1: USB revision 1.0
96
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
97
uhub1: 4 ports with 4 removable, self powered
98
pci0: <USB controller> at 19.2 irq 11
99
pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0
100
atapci0: <ATI IXP400 UDMA133 controller> port 0x8410-0x841f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 20.1 on pci0
101
ata0: <ATA channel 0> on atapci0
102
system power profile changed to 'economy'
103
ad0: 57231MB <SAMSUNG MP0603H UD100-14> at ata0-master UDMA100
104
ata1: <ATA channel 1> on atapci0
105
acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CW02> at ata1-master UDMA33
106
isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0
107
isa0: <ISA bus> on isab0
108
pcib2: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0
109
pci2: <PCI bus> on pcib2
110
ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 5.0 on pci2
111
ath0: MAC address: 00:02:e3:47:d4:dc
112
ath0: mac 7.8 phy 4.5 radio 5.6
113
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0216000-0xd02160ff irq 7 at device 7.0 on pci2
114
miibus0: <MII bus> on rl0
115
rlphy0: <RealTek internal media interface> on miibus0
116
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
117
rl0: MAC address: 00:0a:e4:b2:39:be
118
cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci2
119
cardbus0: <CardBus bus> on cbb0
120
pccard0: <16-bit PCCard bus> on cbb0
121
pcib2: routed slot 9 INTA to irq 255
122
cbb: Unable to map IRQ...
123
device_probe_and_attach: cbb0 attach returned 12
124
fwohci0: vendor=104c, dev=8032
125
fwohci0: <1394 Open Host Controller Interface> mem 0xd0210000-0xd0213fff,0xd0216800-0xd0216fff irq 10 at device 9.2 on pci2
126
fwohci0: OHCI version 1.10 (ROM=0)
127
fwohci0: No. of Isochronous channel is 4.
128
fwohci0: EUI64 00:0a:e4:05:48:10:0b:53
129
fwohci0: Phy 1394a available S400, 2 ports.
130
fwohci0: Link S400, max_rec 2048 bytes.
131
firewire0: <IEEE1394(FireWire) bus> on fwohci0
132
fwe0: <Ethernet over FireWire> on firewire0
133
fwe0: MAC address: 02:0a:e4:10:0b:53
134
sbp0: <SBP-2/SCSI over FireWire> on firewire0
135
fwohci0: Initiate bus reset
136
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
137
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
138
firewire0: bus manager 0 (me)
139
pci2: <unknown card> (vendor=0x104c, dev=0x8033) at 9.3 irq 11
140
pcm0: <ATI IXP 400> mem 0xd0003400-0xd00034ff irq 11 at device 20.5 on pci0
141
pci0: <unknown card> (vendor=0x1002, dev=0x4378) at 20.6 irq 11
142
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
143
pmtimer0 on isa0
144
fdc0: ready for input in output
145
fdc0: cmd 3 failed at out byte 1 of 3
146
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
147
sc0: <System console> at flags 0x100 on isa0
148
sc0: VGA <16 virtual consoles, flags=0x300>
149
sio0: can't drain, serial port might not exist, disabling
150
sio1: can't drain, serial port might not exist, disabling
151
ppc0: parallel port not found.
152
pcm0: <Avance Logic ALC655 AC97 Codec>
153
Mounting root from ufs:/dev/ad0s3a
154
cd0 at ata1 bus 0 target 0 lun 0
155
cd0: <HL-DT-ST DVD-RW GWA-4082N CW02> Removable CD-ROM SCSI-0 device 
156
cd0: 33.000MB/s transfers
157
cd0: Attempt to query device size failed: NOT READY, Medium not present
158
WARNING:  was not properly dismounted
159
Warning: BIOS played with the 8254, resetting it
(1-1/2)