Bug #1101 » dmesg.config

polachok, 08/01/2008 01:14 PM

Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
TSC clock: 799977770 Hz, i8254 clock: 1193146 Hz
CPU: Mobile AMD Sempron(tm) Processor 3300+ (800.01-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
AMD Features=0xc0500000<NX,AMIE,DSP,3DNow!>
real memory = 468320256 (457344K bytes)
FreeBSD Kernel Configuration Utility - Version 1.2
Type "help" for help or "visual" to go to the visual
configuration interface (requires MGA/VGA display or
serial terminal capable of displaying ANSI graphics).
config> flags atkbd0 0
config> quit
avail memory = 440541184 (430216K bytes)
Preloaded elf kernel "/kernel" at 0xc083c000.
Preloaded elf module "/modules/vesa.ko" at 0xc083c294.
Preloaded elf module "/modules/if_ath.ko" at 0xc083c33c.
ath_hal: (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
Preloaded elf module "/modules/ath_hal.ko" at 0xc083c3e4.
Preloaded elf module "/modules/ath_rate.ko" at 0xc083c48c.
Preloaded elf module "/modules/if_rl.ko" at 0xc083c538 (ignored, already in static kernel)
Preloaded elf module "/modules/miibus.ko" at 0xc083c5e0 (ignored, already in static kernel)
Preloaded elf module "/modules/snd_atiixp.ko" at 0xc083c688.
Preloaded elf module "/modules/sound.ko" at 0xc083c734.
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc083c7dc.
Preloaded elf module "/modules/acpi.ko" at 0xc083c824.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
ACPI: RSDP @ 0x0xf7ed0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x1beaa446/0x0034 (v 1 PTLTD RSDT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x1beaedff/0x0074 (v 1 FUJ W37 0x06040000 W37 0x000F4240)
ACPI: DSDT @ 0x0x1beaa47a/0x4985 (v 1 FUJ W37 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x1beaffc0/0x0040
ACPI: SSDT @ 0x0x1beaee73/0x00F7 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001)
ACPI: APIC @ 0x0x1beaef6a/0x005A (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: MCFG @ 0x0x1beaefc4/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD RSDT> on motherboard
ACPI: DSDT was overridden.
ACPI: Table DSDT replaced by host OS
ACPI: DSDT @ 0x0/0x4189 (v 1 FUJ W37 0x06040000 INTL 0x20061109)
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x66,0x62 on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: failed to get status.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5955 graphics accelerator> at 5.0 irq 11
ohci0: <ATI SB400 USB Controller> mem 0xd0000000-0xd0000fff irq 11 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: stray interrupt 7 on cpu 0
sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd0001000-0xd0001fff irq 11 at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
pci0: <USB controller> at 19.2 irq 11
pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0
atapci0: <ATI IXP400 UDMA133 controller> port 0x8410-0x841f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
system power profile changed to 'economy'
ad0: 57231MB <SAMSUNG MP0603H UD100-14> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CW02> at ata1-master UDMA33
isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0
pci2: <PCI bus> on pcib2
ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 5.0 on pci2
ath0: MAC address: 00:02:e3:47:d4:dc
ath0: mac 7.8 phy 4.5 radio 5.6
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0216000-0xd02160ff irq 7 at device 7.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:0a:e4:b2:39:be
cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: routed slot 9 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem 0xd0210000-0xd0213fff,0xd0216800-0xd0216fff irq 10 at device 9.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0a:e4:05:48:10:0b:53
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:0a:e4:10:0b:53
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <unknown card> (vendor=0x104c, dev=0x8033) at 9.3 irq 11
pcm0: <ATI IXP 400> mem 0xd0003400-0xd00034ff irq 11 at device 20.5 on pci0
pci0: <unknown card> (vendor=0x1002, dev=0x4378) at 20.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
pcm0: <Avance Logic ALC655 AC97 Codec>
Mounting root from ufs:/dev/ad0s3a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4082N CW02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: was not properly dismounted
Warning: BIOS played with the 8254, resetting it