|
Copyright (c) 2003-2008 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly 2.1.1-DEVELOPMENT #2: Tue Dec 16 20:48:33 EST 2008
|
|
petr@elevator.homenetwork.org:/usr/obj/usr/src/sys/ZZZ
|
|
Calibrating clock(s) ... TSC clock: 1799947970 Hz, i8254 clock: 1193105 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: AMD Athlon(tm) 64 Processor 3000+ (1800.08-MHz 686-class CPU)
|
|
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
|
|
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
|
|
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
|
|
Data TLB: 32 entries, fully associative
|
|
Instruction TLB: 32 entries, fully associative
|
|
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
|
|
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
|
|
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
|
|
real memory = 1072562176 (1047424K bytes)
|
|
Physical memory chunk(s):
|
|
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
|
|
0x00f64000 - 0x3fecffff, 1056358400 bytes (257900 pages)
|
|
avail memory = 1020375040 (996460K bytes)
|
|
bios32: Found BIOS32 Service Directory header at 0xc00fb880
|
|
bios32: Entry = 0xf1e40 (c00f1e40) Rev = 0 Len = 1
|
|
pcibios: PCI BIOS entry at 0x1e70
|
|
pnpbios: Found PnP BIOS data at 0xc00fc4d0
|
|
pnpbios: Entry = f0000:c500 Rev = 1.0
|
|
Other BIOS signatures found:
|
|
Preloaded elf kernel "/kernel.old" at 0xc0f37000.
|
|
Preloaded elf module "/modules/nvidia.ko" at 0xc0f37298.
|
|
Preloaded elf module "/modules/acpi.ko" at 0xc0f37340.
|
|
crypto: <crypto core>
|
|
wlan: <802.11 Link Layer>
|
|
Pentium Pro MTRR support enabled
|
|
md0: Malloc disk
|
|
Math emulator present
|
|
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804
|
|
pci_open(1a): mode1res=0x80000000 (0x80000000)
|
|
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=02381106)
|
|
pcibios: BIOS version 3.00
|
|
Using $PIR table, 18 entries at 0xc00fde40
|
|
PCI-Only Interrupts: 3 5 7 11
|
|
Location Bus Device Pin Link IRQs
|
|
slot 1 0 11 A 0x01 3 4 5 7 9 10 11 12 14 15
|
|
slot 1 0 11 B 0x02 3 4 5 7 9 10 11 12 14 15
|
|
slot 1 0 11 C 0x03 3 4 5 7 9 10 11 12 14 15
|
|
slot 1 0 11 D 0x05 3 4 5 7 9 10 11 12 14 15
|
|
slot 2 0 12 A 0x02 3 4 5 7 9 10 11 12 14 15
|
|
slot 2 0 12 B 0x03 3 4 5 7 9 10 11 12 14 15
|
|
slot 2 0 12 C 0x05 3 4 5 7 9 10 11 12 14 15
|
|
slot 2 0 12 D 0x01 3 4 5 7 9 10 11 12 14 15
|
|
slot 3 0 13 A 0x03 3 4 5 7 9 10 11 12 14 15
|
|
slot 3 0 13 B 0x05 3 4 5 7 9 10 11 12 14 15
|
|
slot 3 0 13 C 0x01 3 4 5 7 9 10 11 12 14 15
|
|
slot 3 0 13 D 0x02 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 8 B 0x01 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 8 C 0x01 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 8 D 0x01 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 10 B 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 10 C 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 10 D 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 7 A 0x02 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 7 B 0x02 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 7 C 0x02 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 7 D 0x02 3 4 5 7 9 10 11 12 14 15
|
|
slot 4 2 0 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 4 2 0 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 4 2 0 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 4 2 0 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 5 3 0 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 5 3 0 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 5 3 0 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 5 3 0 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 6 4 0 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 6 4 0 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 6 4 0 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 6 4 0 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 5 0 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 5 0 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 5 0 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 5 0 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 7 6 0 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 7 6 0 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 7 6 0 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
slot 7 6 0 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 15 C 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 15 D 0x05 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 16 D 0x05 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 2 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 2 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 2 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 2 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 A 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 B 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 C 0x09 3 4 5 7 9 10 11 12 14 15
|
|
embedded 0 3 D 0x09 3 4 5 7 9 10 11 12 14 15
|
|
ACPI: RSDP @ 0x0xf7ba0/0x0014 (v 0 K8T890)
|
|
ACPI: RSDT @ 0x0x3fee3040/0x0030 (v 1 K8T890 AWRDACPI 0x42302E31 AWRD 0x00000000)
|
|
ACPI: FACP @ 0x0x3fee30c0/0x0074 (v 1 K8T890 AWRDACPI 0x42302E31 AWRD 0x00000000)
|
|
ACPI: DSDT @ 0x0x3fee3180/0x79C5 (v 1 K8T890 AWRDACPI 0x00001000 MSFT 0x0100000E)
|
|
ACPI: FACS @ 0x0x3fee0000/0x0040
|
|
ACPI: MCFG @ 0x0x3feeac80/0x003C (v 1 K8T890 AWRDACPI 0x42302E31 AWRD 0x00000000)
|
|
ACPI: APIC @ 0x0x3feeabc0/0x0066 (v 1 K8T890 AWRDACPI 0x42302E31 AWRD 0x00000000)
|
|
sched_ithd: stray interrupt 7 on cpu 0
|
|
npx0.nexus0.root0
|
|
npx0: <math processor> [tentative] on motherboard
|
|
npx0: INT 16 interface
|
|
Using XMM optimized bcopy/copyin/copyout
|
|
npx0: <math processor> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <K8T890 AWRDACPI> [tentative] on motherboard
|
|
AcpiOsDerivePciId: bus 0 dev 17 func 0
|
|
AcpiOsDerivePciId: bus 0 dev 15 func 1
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
AcpiOsDerivePciId: bus 0 dev 17 func 1
|
|
AcpiOsDerivePciId: bus 0 dev 15 func 0
|
|
AcpiOsDerivePciId: bus 2 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 3 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 4 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 5 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 6 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 0 dev 17 func 0
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x4008-0x400b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x4008-0x400b on acpi0
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu0: switching to generic Cx mode
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
acpi_tz0.acpi0.nexus0.root0
|
|
acpi_tz0: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz0: <Thermal Zone> [attached!] on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
fdc0.acpi0.nexus0.root0
|
|
fdc0: <NEC 72065B or clone> [tentative] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
|
|
fdc0: FIFO enabled, 8 bytes threshold
|
|
fdc0: <NEC 72065B or clone> [attached!] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi0: <K8T890 AWRDACPI> [attached!] at irq 9 on motherboard
|
|
legacypci0.nexus0.root0
|
|
legacypci0 [tentative] on motherboard
|
|
pcib0.legacypci0.nexus0.root0
|
|
pcib0: <Host to PCI bridge> [tentative] on legacypci0
|
|
pci0.pcib0.legacypci0.nexus0.root0
|
|
pci0: <PCI bus> [tentative] on pcib0
|
|
pci0: pci_attach() physical bus=0
|
|
map[10]: type 1, range 32, base c0000000, size 27
|
|
found-> vendor=0x1106, dev=0x0238, revid=0x00
|
|
bus=0, slot=0, func=0
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x1238, revid=0x00
|
|
bus=0, slot=0, func=1
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x2238, revid=0x00
|
|
bus=0, slot=0, func=2
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x3238, revid=0x00
|
|
bus=0, slot=0, func=3
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x4238, revid=0x00
|
|
bus=0, slot=0, func=4
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x5238, revid=0x00
|
|
bus=0, slot=0, func=5
|
|
class=[BASEPERIPH]08-00-20, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0x7238, revid=0x00
|
|
bus=0, slot=0, func=7
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1106, dev=0xb188, revid=0x00
|
|
bus=0, slot=1, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
|
|
subordinatebus=1 secondarybus=1
|
|
found-> vendor=0x1106, dev=0xa238, revid=0x00
|
|
bus=0, slot=2, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
|
|
subordinatebus=2 secondarybus=2
|
|
intpin=a, irq=11
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x1106, dev=0xc238, revid=0x00
|
|
bus=0, slot=3, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=3 secondarybus=3
|
|
intpin=a, irq=11
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x1106, dev=0xd238, revid=0x00
|
|
bus=0, slot=3, func=1
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=4 secondarybus=4
|
|
intpin=b, irq=11
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x1106, dev=0xe238, revid=0x00
|
|
bus=0, slot=3, func=2
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=5 secondarybus=5
|
|
intpin=c, irq=11
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x1106, dev=0xf238, revid=0x00
|
|
bus=0, slot=3, func=3
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=6 secondarybus=6
|
|
intpin=d, irq=11
|
|
PCI Express ver.1 cap=0x0041
|
|
map[10]: type 1, range 32, base d8026000, size 11
|
|
map[14]: type 1, range 32, base d8020000, size 14
|
|
found-> vendor=0x104c, dev=0x8023, revid=0x00
|
|
bus=0, slot=8, func=0
|
|
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=3
|
|
map[10]: type 1, range 32, base 0000b000, size 5
|
|
found-> vendor=0x1102, dev=0x0002, revid=0x07
|
|
bus=0, slot=11, func=0
|
|
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=3
|
|
map[10]: type 1, range 32, base 0000b400, size 3
|
|
found-> vendor=0x1102, dev=0x7002, revid=0x07
|
|
bus=0, slot=11, func=1
|
|
class=[INPUTDEV]09-80-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
map[10]: type 1, range 32, base d8024000, size 13
|
|
map[14]: type 1, range 32, base d8000000, size 17
|
|
found-> vendor=0x104c, dev=0x9066, revid=0x00
|
|
bus=0, slot=12, func=0
|
|
class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=5
|
|
map[10]: type 1, range 32, base d8027000, size 12
|
|
found-> vendor=0x109e, dev=0x036e, revid=0x11
|
|
bus=0, slot=13, func=0
|
|
class=[MULTIMEDIA]04-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=7
|
|
map[10]: type 1, range 32, base d8028000, size 12
|
|
found-> vendor=0x109e, dev=0x0878, revid=0x11
|
|
bus=0, slot=13, func=1
|
|
class=[MULTIMEDIA]04-80-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=7
|
|
map[10]: type 1, range 32, base 0000b800, size 3
|
|
map[14]: type 1, range 32, base 0000bc00, size 2
|
|
map[18]: type 1, range 32, base 0000c000, size 3
|
|
map[1c]: type 1, range 32, base 0000c400, size 2
|
|
map[20]: type 1, range 32, base 0000c800, size 4
|
|
map[24]: type 1, range 32, base 0000cc00, size 8
|
|
found-> vendor=0x1106, dev=0x3149, revid=0x80
|
|
bus=0, slot=15, func=0
|
|
class=[STORAGE]01-01-8f, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=b, irq=11
|
|
map[20]: type 1, range 32, base 0000d000, size 4
|
|
found-> vendor=0x1106, dev=0x0571, revid=0x06
|
|
bus=0, slot=15, func=1
|
|
class=[STORAGE]01-01-8a, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=255
|
|
map[20]: type 1, range 32, base 0000d400, size 5
|
|
found-> vendor=0x1106, dev=0x3038, revid=0x81
|
|
bus=0, slot=16, func=0
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=3
|
|
map[20]: type 1, range 32, base 0000d800, size 5
|
|
found-> vendor=0x1106, dev=0x3038, revid=0x81
|
|
bus=0, slot=16, func=1
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=3
|
|
map[20]: type 1, range 32, base 0000dc00, size 5
|
|
found-> vendor=0x1106, dev=0x3038, revid=0x81
|
|
bus=0, slot=16, func=2
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=b, irq=5
|
|
map[20]: type 1, range 32, base 0000e000, size 5
|
|
found-> vendor=0x1106, dev=0x3038, revid=0x81
|
|
bus=0, slot=16, func=3
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=b, irq=5
|
|
map[10]: type 1, range 32, base d8029000, size 8
|
|
found-> vendor=0x1106, dev=0x3104, revid=0x86
|
|
bus=0, slot=16, func=4
|
|
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=7
|
|
found-> vendor=0x1106, dev=0x3227, revid=0x00
|
|
bus=0, slot=17, func=0
|
|
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1022, dev=0x1100, revid=0x00
|
|
bus=0, slot=24, func=0
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1022, dev=0x1101, revid=0x00
|
|
bus=0, slot=24, func=1
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1022, dev=0x1102, revid=0x00
|
|
bus=0, slot=24, func=2
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
found-> vendor=0x1022, dev=0x1103, revid=0x00
|
|
bus=0, slot=24, func=3
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
agp0.pci0.pcib0.legacypci0.nexus0.root0
|
|
agp0: <VIA 3238 host to PCI bridge> [tentative] mem 0xc0000000-0xc7ffffff at device 0.0 on pci0
|
|
agp0: 1 Miscellaneous Control unit(s) found.
|
|
agp0: allocating GATT for aperture of size 128M
|
|
agp0: <VIA 3238 host to PCI bridge> [attached!] mem 0xc0000000-0xc7ffffff at device 0.0 on pci0
|
|
pci0: <unknown card> (vendor=0x1106, dev=0x5238) at 0.5
|
|
pcib1.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [tentative] at device 1.0 on pci0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xf000-0xfff
|
|
pcib1: memory decode 0xfff00000-0xfffff
|
|
pcib1: prefetched decode 0xfff00000-0xfffff
|
|
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci1: <PCI bus> [tentative] on pcib1
|
|
pci1: pci_attach() physical bus=1
|
|
pci1: <PCI bus> [attached!] on pcib1
|
|
pcib1: <PCI to PCI bridge (vendor=1106 device=b188)> [attached!] at device 1.0 on pci0
|
|
pcib2.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib2: <PCI to PCI bridge (vendor=1106 device=a238)> [tentative] irq 11 at device 2.0 on pci0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: memory decode 0xd0000000-0xd7ffffff
|
|
pcib2: prefetched decode 0xc8000000-0xcfffffff
|
|
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci2: <PCI bus> [tentative] on pcib2
|
|
pci2: pci_attach() physical bus=2
|
|
map[10]: type 1, range 32, base d0000000, size 26
|
|
map[14]: type 1, range 64, base c8000000, size 27
|
|
map[1c]: type 1, range 64, base d4000000, size 24
|
|
found-> vendor=0x10de, dev=0x0140, revid=0xa2
|
|
bus=2, slot=0, func=0
|
|
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=11
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
nvidia0.pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
|
|
nvidia0: <GeForce 6600 GT> [tentative] mem 0xd4000000-0xd4ffffff,0xc8000000-0xcfffffff,0xd0000000-0xd3ffffff irq 11 at device 0.0 on pci2
|
|
pcib2: device nvidia0 requested decoded memory range 0xd0000000-0xd3ffffff
|
|
pcib2: device nvidia0 requested decoded memory range 0xc8000000-0xcfffffff
|
|
pcib2: device nvidia0 requested decoded memory range 0xd4000000-0xd4ffffff
|
|
nvidia0: <GeForce 6600 GT> [attached!] mem 0xd4000000-0xd4ffffff,0xc8000000-0xcfffffff,0xd0000000-0xd3ffffff irq 11 at device 0.0 on pci2
|
|
pci2: <PCI bus> [attached!] on pcib2
|
|
pcib2: <PCI to PCI bridge (vendor=1106 device=a238)> [attached!] irq 11 at device 2.0 on pci0
|
|
pcib3.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib3: <PCI to PCI bridge (vendor=1106 device=c238)> [tentative] irq 11 at device 3.0 on pci0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0x0-0x0
|
|
pcib3: memory decode 0x0-0x0
|
|
pcib3: prefetched decode 0x0-0x0
|
|
pci3.pcib3.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci3: <PCI bus> [tentative] on pcib3
|
|
pci3: pci_attach() physical bus=3
|
|
pci3: <PCI bus> [attached!] on pcib3
|
|
pcib3: <PCI to PCI bridge (vendor=1106 device=c238)> [attached!] irq 11 at device 3.0 on pci0
|
|
pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib4: <PCI to PCI bridge (vendor=1106 device=d238)> [tentative] irq 11 at device 3.1 on pci0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0x0-0x0
|
|
pcib4: memory decode 0x0-0x0
|
|
pcib4: prefetched decode 0x0-0x0
|
|
pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci4: <PCI bus> [tentative] on pcib4
|
|
pci4: pci_attach() physical bus=4
|
|
pci4: <PCI bus> [attached!] on pcib4
|
|
pcib4: <PCI to PCI bridge (vendor=1106 device=d238)> [attached!] irq 11 at device 3.1 on pci0
|
|
pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib5: <PCI to PCI bridge (vendor=1106 device=e238)> [tentative] irq 11 at device 3.2 on pci0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0x0-0x0
|
|
pcib5: memory decode 0x0-0x0
|
|
pcib5: prefetched decode 0x0-0x0
|
|
pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci5: <PCI bus> [tentative] on pcib5
|
|
pci5: pci_attach() physical bus=5
|
|
pci5: <PCI bus> [attached!] on pcib5
|
|
pcib5: <PCI to PCI bridge (vendor=1106 device=e238)> [attached!] irq 11 at device 3.2 on pci0
|
|
pcib6.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib6: <PCI to PCI bridge (vendor=1106 device=f238)> [tentative] irq 11 at device 3.3 on pci0
|
|
pcib6: secondary bus 6
|
|
pcib6: subordinate bus 6
|
|
pcib6: I/O decode 0x0-0x0
|
|
pcib6: memory decode 0x0-0x0
|
|
pcib6: prefetched decode 0x0-0x0
|
|
pci6.pcib6.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci6: <PCI bus> [tentative] on pcib6
|
|
pci6: pci_attach() physical bus=6
|
|
pci6: <PCI bus> [attached!] on pcib6
|
|
pcib6: <PCI to PCI bridge (vendor=1106 device=f238)> [attached!] irq 11 at device 3.3 on pci0
|
|
pci0: <unknown card> (vendor=0x104c, dev=0x8023) at 8.0 irq 3
|
|
pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 11.0 irq 3
|
|
pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 11.1
|
|
acx0.pci0.pcib0.legacypci0.nexus0.root0
|
|
acx0: <Texas Instruments TNETW1130 Wireless Adapter> [tentative] mem 0xd8000000-0xd801ffff,0xd8024000-0xd8025fff irq 5 at device 12.0 on pci0
|
|
acx0: radio type 16
|
|
acx0: EEPROM version 5
|
|
acx0: bpf attached
|
|
acx0: MAC address: 00:11:95:5f:2b:ab
|
|
acx0: bpf attached
|
|
acx0: bpf attached
|
|
acx0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 22Mbps
|
|
acx0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 22Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
|
|
acx0: <Texas Instruments TNETW1130 Wireless Adapter> [attached!] mem 0xd8000000-0xd801ffff,0xd8024000-0xd8025fff irq 5 at device 12.0 on pci0
|
|
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 13.0 irq 7
|
|
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 7
|
|
atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
atapci0: <VIA 6420 SATA150 controller> [tentative] port 0xcc00-0xccff,0xc800-0xc80f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 irq 11 at device 15.0 on pci0
|
|
ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata2: <ATA channel 0> [tentative] on atapci0
|
|
ata2: SATA connect time=0ms
|
|
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
|
|
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
|
|
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
|
|
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
|
|
ad4: VIA check1 failed
|
|
ad4: Adaptec check1 failed
|
|
ad4: LSI (v3) check1 failed
|
|
ad4: LSI (v2) check1 failed
|
|
ad4: FreeBSD check1 failed
|
|
ad4: 476940MB <Seagate ST3500320AS SD15> at ata2-master SATA150
|
|
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata2: <ATA channel 0> [attached!] on atapci0
|
|
ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata3: <ATA channel 1> [tentative] on atapci0
|
|
ata3: SATA connect time=0ms
|
|
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
|
|
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
|
|
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
|
|
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
|
|
ad6: VIA check1 failed
|
|
ad6: Adaptec check1 failed
|
|
ad6: LSI (v3) check1 failed
|
|
ad6: LSI (v2) check1 failed
|
|
ad6: FreeBSD check1 failed
|
|
ad6: 76293MB <WDC WD800JD-75JNA0 05.01C05> at ata3-master SATA150
|
|
ad6: 156250000 sectors [155009C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata3: <ATA channel 1> [attached!] on atapci0
|
|
atapci0: <VIA 6420 SATA150 controller> [attached!] port 0xcc00-0xccff,0xc800-0xc80f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 irq 11 at device 15.0 on pci0
|
|
atapci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
atapci1: <VIA 8237 UDMA133 controller> [tentative] port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
|
|
ata0.atapci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata0: <ATA channel 0> [tentative] on atapci1
|
|
atapci1: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
|
|
atapci1: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
|
|
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
|
|
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
|
|
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
|
|
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
|
|
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
|
|
ad0: setting PIO4 on 8237 chip
|
|
ad0: setting UDMA100 on 8237 chip
|
|
ad0: VIA check1 failed
|
|
ad0: Adaptec check1 failed
|
|
ad0: LSI (v3) check1 failed
|
|
ad0: LSI (v2) check1 failed
|
|
ad0: FreeBSD check1 failed
|
|
ad0: 38166MB <WDC WD400JB-00ENA0 05.03E05> at ata0-master UDMA100
|
|
ad0: 78165360 sectors [77545C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata0: <ATA channel 0> [attached!] on atapci1
|
|
ata1.atapci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata1: <ATA channel 1> [tentative] on atapci1
|
|
atapci1: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
|
|
atapci1: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
|
|
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
|
|
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
|
|
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
|
|
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
|
|
acd0: setting PIO4 on 8237 chip
|
|
acd0: setting UDMA66 on 8237 chip
|
|
acd0: <PIONEER DVD-RW DVR-109/1.57> DVDR drive at ata1 as master
|
|
acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UDMA66
|
|
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
|
|
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
|
|
acd0: Audio: play, 256 volume levels
|
|
acd0: Mechanism: ejectable tray, unlocked
|
|
acd0: Medium: no/blank disc
|
|
ata1: <ATA channel 1> [attached!] on atapci1
|
|
atapci1: <VIA 8237 UDMA133 controller> [attached!] port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
|
|
uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci0: <VIA 83C572 USB controller> [tentative] port 0xd400-0xd41f irq 3 at device 16.0 on pci0
|
|
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb0: <VIA 83C572 USB controller> [tentative] on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
|
|
usb0: <VIA 83C572 USB controller> [attached!] on uhci0
|
|
uhci0: <VIA 83C572 USB controller> [attached!] port 0xd400-0xd41f irq 3 at device 16.0 on pci0
|
|
uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci1: <VIA 83C572 USB controller> [tentative] port 0xd800-0xd81f irq 3 at device 16.1 on pci0
|
|
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb1: <VIA 83C572 USB controller> [tentative] on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
|
|
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
|
|
(probe0:ata3:0:0:0): error 22
|
|
(probe0:ata3:0:0:0): Unretryable Error
|
|
ukbd0.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> [tentative] on uhub1
|
|
kbd: new array size 4
|
|
kbd1 at ukbd0
|
|
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
|
|
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> [attached!] on uhub1
|
|
ums0.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> [tentative] on uhub1
|
|
ums0: 16 buttons and Z dir.
|
|
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/30.07, addr 2> [attached!] on uhub1
|
|
usb1: <VIA 83C572 USB controller> [attached!] on uhci1
|
|
uhci1: <VIA 83C572 USB controller> [attached!] port 0xd800-0xd81f irq 3 at device 16.1 on pci0
|
|
uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci2: <VIA 83C572 USB controller> [tentative] port 0xdc00-0xdc1f irq 5 at device 16.2 on pci0
|
|
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb2: <VIA 83C572 USB controller> [tentative] on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
|
|
usb2: <VIA 83C572 USB controller> [attached!] on uhci2
|
|
uhci2: <VIA 83C572 USB controller> [attached!] port 0xdc00-0xdc1f irq 5 at device 16.2 on pci0
|
|
uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci3: <VIA 83C572 USB controller> [tentative] port 0xe000-0xe01f irq 5 at device 16.3 on pci0
|
|
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb3: <VIA 83C572 USB controller> [tentative] on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
|
|
umass0.uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub3
|
|
umass0:4:0:-1: Attached to scbus4
|
|
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub3
|
|
usb3: <VIA 83C572 USB controller> [attached!] on uhci3
|
|
uhci3: <VIA 83C572 USB controller> [attached!] port 0xe000-0xe01f irq 5 at device 16.3 on pci0
|
|
pci0: <USB controller> (vendor=0x1106, dev=0x3104) at 16.4 irq 7
|
|
isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> [tentative] at device 17.0 on pci0
|
|
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> [attached!] at device 17.0 on pci0
|
|
pci0: <PCI bus> [attached!] on pcib0
|
|
pcib0: <Host to PCI bridge> [attached!] on legacypci0
|
|
legacypci0 [attached!] on motherboard
|
|
fdc-: fdc0 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
ahc_isa_probe 11: ioport 0xbc00 alloc failed
|
|
ahc_isa_probe 12: ioport 0xcc00 alloc failed
|
|
ahc_isa_probe 13: ioport 0xdc00 alloc failed
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
fdc1: cannot reserve I/O port range
|
|
fdc1 [tentative] failed to probe at port 0x3f0 irq 6 drq 2 on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
bt0: Failed Status Reg Test - 2
|
|
bt_isa_probe: Probe failed at 0x330
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x334
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x230
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x234
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x130
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x134
|
|
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aha0: status reg test failed 2
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
|
|
atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
|
|
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0047
|
|
atkbd: keyboard ID 0xffffffff (1)
|
|
atkbd: failed to reset the keyboard.
|
|
device_probe_and_attach: atkbd0 attach returned 6
|
|
psm0: current command byte:0047
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
|
|
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
atkbd: the current kbd controller command byte 0047
|
|
atkbd: keyboard ID 0xffffffff (1)
|
|
atkbd: failed to reset the keyboard.
|
|
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290 on isa0
|
|
it0 [tentative] failed to probe at port 0x290 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
ie0: not probed (disabled)
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
BIOS Geometries:
|
|
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
|
|
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
|
|
2:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
|
|
3:03e60f20 0..998=999 cylinders, 0..15=16 heads, 1..32=32 sectors
|
|
0 accounted for
|
|
Device configuration finished.
|
|
crypto: assign driver 0, flags 2
|
|
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
|
|
ppp0: bpf attached
|
|
sl0: bpf attached
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
(probe0:ata3:0:0:0): error 6
|
|
(probe0:ata3:0:0:0): Unretryable Error
|
|
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00 0x01
|
|
(probe0:ata3:0:0:0): error 22
|
|
(probe0:ata3:0:0:0): Unretryable Error
|
|
pass0 at ata3 bus 0 target 0 lun 0
|
|
pass0: <PIONEER DVD-RW DVR-109 1.57> Removable CD-ROM SCSI-0 device
|
|
pass0: 66.000MB/s transfers
|
|
pass1 at umass-sim0 bus 0 target 0 lun 0
|
|
pass1: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
|
|
pass1: 1.000MB/s transfers
|
|
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:ad4s1d
|
|
(cd0:ata3:0:0:0): error 6
|
|
(cd0:ata3:0:0:0): Unretryable Error
|
|
cd0 at ata3 bus 0 target 0 lun 0
|
|
cd0: <PIONEER DVD-RW DVR-109 1.57> Removable CD-ROM SCSI-0 device
|
|
cd0: 66.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present
|
|
da0 at umass-sim0 bus 0 target 0 lun 0
|
|
da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
|
|
da0: 1.000MB/s transfers
|
|
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
|
|
ad4s1: type 0xa5, start 63, end = 976773167, size 976773105 : OK
|
|
start_init: trying /sbin/init
|
|
acx0: base firmware loaded
|
|
acx0: MAC address (from firmware): 00:11:95:5f:2b:ab
|
|
acx0: regdom 30
|
|
acx0: antenna 4a
|
|
acx0: sensitivity 00
|
|
acx0: fw rev 01020030, hw id 03010101
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
Linux ELF exec handler installed
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
sched_ithd: stray interrupt 7 on cpu 0
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
acx0: basic rates: 0x0027
|
|
acx0: join BSS/IBSS on channel 11
|
|
|
