|
Copyright (c) 2003-2009 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly 2.1.1-DEVELOPMENT #0: Fri Jan 30 16:10:58 GMT 2009
|
|
corecode@labospc6.epfl.ch:/usr/obj/usr/src/sys/HEDGENOGG
|
|
Calibrating clock(s) ... TSC clock: 2826201329 Hz, i8254 clock: 1193169 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (2826.25-MHz 686-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
|
|
Hyperthreading: 4 logical CPUs
|
|
real memory = 3487567872 (3405828K bytes)
|
|
Physical memory chunk(s):
|
|
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
|
|
0x00d64000 - 0xcfdf0fff, 3473461248 bytes (848013 pages)
|
|
avail memory = 3372544000 (3293500K bytes)
|
|
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
|
|
Programming 24 pins in IOAPIC #0
|
|
IOAPIC #0 intpin 1 -> irq 1
|
|
IOAPIC #0 intpin 2 -> irq 0
|
|
IOAPIC #0 intpin 3 -> irq 3
|
|
IOAPIC #0 intpin 4 -> irq 4
|
|
IOAPIC #0 intpin 5 -> irq 5
|
|
IOAPIC #0 intpin 6 -> irq 6
|
|
IOAPIC #0 intpin 7 -> irq 7
|
|
IOAPIC #0 intpin 8 -> irq 8
|
|
IOAPIC #0 intpin 9 -> irq 9
|
|
IOAPIC #0 intpin 10 -> irq 10
|
|
IOAPIC #0 intpin 11 -> irq 11
|
|
IOAPIC #0 intpin 12 -> irq 12
|
|
IOAPIC #0 intpin 14 -> irq 14
|
|
IOAPIC #0 intpin 15 -> irq 15
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
DragonFly/MP: Multiprocessor motherboard
|
|
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
|
|
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
|
|
cpu2 (AP): apic id: 2, version: 0x00050014, at 0xfee00000
|
|
cpu3 (AP): apic id: 3, version: 0x00050014, at 0xfee00000
|
|
io0 (APIC): apic id: 8, version: 0x00170020, at 0xfec00000
|
|
APIC_IO: Testing 8254 interrupt delivery
|
|
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
|
|
Finish MP startup
|
|
SMP: AP CPU #3 Launched!
|
|
SMP: CPU3 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: AP CPU #1 Launched!
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: AP CPU #2 Launched!
|
|
SMP: CPU2 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
Active CPU Mask: 0000000f
|
|
bios32: Found BIOS32 Service Directory header at 0xc00ffe90
|
|
bios32: Entry = 0xffea0 (c00ffea0) Rev = 0 Len = 1
|
|
pcibios: PCI BIOS entry at 0xb950
|
|
pnpbios: Found PnP BIOS data at 0xc00fe2d0
|
|
pnpbios: Entry = f0000:e2f4 Rev = 1.0
|
|
Other BIOS signatures found:
|
|
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->64
|
|
Preloaded elf kernel "/boot/kernel" at 0xc0d37000.
|
|
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0d372e0.
|
|
Preloaded elf module "/boot/modules/acpi.ko" at 0xc0d3738c.
|
|
start scheduler helpers on cpus: 0 1 2 3
|
|
start dummy scheduler helpers on cpus: 0 1 2 3
|
|
crypto: <crypto core>
|
|
Pentium Pro MTRR support enabled
|
|
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000098
|
|
pci_open(1a): mode1res=0x80000000 (0x80000000)
|
|
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29e08086)
|
|
pcibios: BIOS version 2.10
|
|
Using $PIR table, 15 entries at 0xc00fed10
|
|
PCI-Only Interrupts: none
|
|
Location Bus Device Pin Link IRQs
|
|
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 6 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 6 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 6 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 2 0 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 2 0 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 2 0 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 2 0 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 26 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 26 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 26 C 0x6a 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 26 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 27 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 28 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 28 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 28 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 28 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 29 A 0x6b 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 29 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 0 31 C 0x68 3 4 5 6 7 9 10 11 14 15
|
|
slot 10 1 0 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 10 1 0 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 10 1 0 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 10 1 0 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 4 0 A 0x61 3 4 5 6 7 9 10 11 14 15
|
|
embedded 4 0 B 0x62 3 4 5 6 7 9 10 11 14 15
|
|
embedded 4 0 C 0x63 3 4 5 6 7 9 10 11 14 15
|
|
embedded 4 0 D 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 3 3 0 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 3 3 0 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 3 3 0 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 3 3 0 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 4 3 A 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 4 3 B 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 4 3 C 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 4 4 3 D 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 1 5 0 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 1 5 0 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 1 5 0 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 1 5 0 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 5 5 4 A 0x60 3 4 5 6 7 9 10 11 14 15
|
|
slot 5 5 4 B 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 5 5 4 C 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 5 5 4 D 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 6 5 5 A 0x61 3 4 5 6 7 9 10 11 14 15
|
|
slot 6 5 5 B 0x62 3 4 5 6 7 9 10 11 14 15
|
|
slot 6 5 5 C 0x63 3 4 5 6 7 9 10 11 14 15
|
|
slot 6 5 5 D 0x60 3 4 5 6 7 9 10 11 14 15
|
|
ACPI: RSDP @ 0x0xfebf0/0x0024 (v 2 DELL )
|
|
ACPI: XSDT @ 0x0xfcea8/0x0094 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: FACP @ 0x0xfcfd0/0x00F4 (v 3 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: DSDT @ 0x0xfff5ab5b/0x3794 (v 1 DELL dt_ex 0x00001000 INTL 0x20050624)
|
|
ACPI: FACS @ 0x0xcfe01c00/0x0040
|
|
ACPI: SSDT @ 0x0xfff5e2ef/0x0099 (v 1 DELL st_ex 0x00001000 INTL 0x20050624)
|
|
ACPI: APIC @ 0x0xfd0c4/0x0092 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: BOOT @ 0x0xfd156/0x0028 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: ASF! @ 0x0xfd17e/0x0096 (v 32 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: MCFG @ 0x0xfd214/0x003E (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: HPET @ 0x0xfd252/0x0038 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: TCPA @ 0x0xfd4ae/0x0032 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: SLIC @ 0x0xfd28a/0x0176 (v 1 DELL B9K 0x00000015 ASL 0x00000061)
|
|
ACPI: SSDT @ 0x0xcfe01c40/0x01B7 (v 1 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050624)
|
|
ACPI: SSDT @ 0x0xcfe02049/0x01B7 (v 1 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050624)
|
|
ACPI: SSDT @ 0x0xcfe02452/0x01B7 (v 1 DpgPmm Cpu2Ist 0x00000011 INTL 0x20050624)
|
|
ACPI: SSDT @ 0x0xcfe0285b/0x01B7 (v 1 DpgPmm Cpu3Ist 0x00000011 INTL 0x20050624)
|
|
ACPI: SSDT @ 0x0xcfe02c64/0x0140 (v 1 DpgPmm CpuPm 0x00000010 INTL 0x20050624)
|
|
npx0.nexus0.root0
|
|
npx0: <math processor> [tentative] on motherboard
|
|
npx0: INT 16 interface
|
|
Using XMM optimized bcopy/copyin/copyout
|
|
npx0: <math processor> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <DELL B9K > [tentative] on motherboard
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
acpi_bus_number: root bus has no _BBN, assuming 0
|
|
AcpiOsDerivePciId: bus 0 dev 31 func 0
|
|
acpi_bus_number: root bus has no _BBN, assuming 0
|
|
AcpiOsDerivePciId: bus 0 dev 31 func 0
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks BAD min = 3, max = 6, width = 3
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks BAD min = 3, max = 6, width = 3
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
ACPI timer looks GOOD min = 3, max = 5, width = 2
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu0: switching to generic Cx mode
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
atkbdc0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0.atkbdc0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: keyboard ID 0x41ab (2)
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
|
|
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
|
|
psm0: current command byte:0065
|
|
psm0.atkbdc0.acpi0.nexus0.root0
|
|
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
|
|
psm0: model IntelliMouse, device ID 3-00, 3 buttons
|
|
psm0: config:00000000, flags:00000000, packet size:4
|
|
psm0: syncmask:08, syncbits:08
|
|
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi0: <DELL B9K > [attached!] at irq 9 on motherboard
|
|
legacypci0.nexus0.root0
|
|
legacypci0 [tentative] on motherboard
|
|
pcib0.legacypci0.nexus0.root0
|
|
pcib0: <Host to PCI bridge> [tentative] on legacypci0
|
|
pci0.pcib0.legacypci0.nexus0.root0
|
|
pci0: <PCI bus> [tentative] on pcib0
|
|
pci0: pci_attach() physical bus=0
|
|
found-> vendor=0x8086, dev=0x29e0, revid=0x00
|
|
bus=0, slot=0, func=0
|
|
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
IOAPIC #0 intpin 16 -> irq 2
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
found-> vendor=0x8086, dev=0x29e1, revid=0x00
|
|
bus=0, slot=1, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
|
|
subordinatebus=1 secondarybus=1
|
|
intpin=a, irq=2
|
|
PCI Express ver.2 cap=0x0142
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
found-> vendor=0x8086, dev=0x29e9, revid=0x00
|
|
bus=0, slot=6, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
|
|
subordinatebus=2 secondarybus=2
|
|
intpin=a, irq=2
|
|
PCI Express ver.2 cap=0x0142
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
map[20]: type 1, range 32, base 0000ff20, size 5
|
|
found-> vendor=0x8086, dev=0x2937, revid=0x02
|
|
bus=0, slot=26, func=0
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=2
|
|
IOAPIC #0 intpin 17 -> irq 13
|
|
Freeing (NOT implemented) redirected PCI irq 10.
|
|
Freeing (NOT implemented) redirected PCI irq 10.
|
|
map[20]: type 1, range 32, base 0000ff00, size 5
|
|
found-> vendor=0x8086, dev=0x2938, revid=0x02
|
|
bus=0, slot=26, func=1
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=b, irq=13
|
|
IOAPIC #0 intpin 22 -> irq 16
|
|
Freeing (NOT implemented) redirected PCI irq 9.
|
|
Freeing (NOT implemented) redirected PCI irq 9.
|
|
map[20]: type 1, range 32, base 0000ecc0, size 5
|
|
found-> vendor=0x8086, dev=0x2939, revid=0x02
|
|
bus=0, slot=26, func=2
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=16
|
|
Freeing (NOT implemented) redirected PCI irq 9.
|
|
Freeing (NOT implemented) redirected PCI irq 9.
|
|
map[10]: type 1, range 32, base fdffbc00, size 10
|
|
found-> vendor=0x8086, dev=0x293c, revid=0x02
|
|
bus=0, slot=26, func=7
|
|
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=16
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
map[10]: type 1, range 64, base fdffc000, size 14
|
|
found-> vendor=0x8086, dev=0x293e, revid=0x02
|
|
bus=0, slot=27, func=0
|
|
class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=2
|
|
PCI Express ver.1 cap=0x0091
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
found-> vendor=0x8086, dev=0x2940, revid=0x02
|
|
bus=0, slot=28, func=0
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=3 secondarybus=3
|
|
intpin=a, irq=2
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00180560[HOTPLUG]
|
|
Freeing (NOT implemented) redirected PCI irq 10.
|
|
found-> vendor=0x8086, dev=0x294a, revid=0x02
|
|
bus=0, slot=28, func=5
|
|
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
|
|
subordinatebus=4 secondarybus=4
|
|
intpin=b, irq=13
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
|
|
IOAPIC #0 intpin 23 -> irq 17
|
|
Freeing (NOT implemented) redirected PCI irq 5.
|
|
Freeing (NOT implemented) redirected PCI irq 5.
|
|
map[20]: type 1, range 32, base 0000ff80, size 5
|
|
found-> vendor=0x8086, dev=0x2934, revid=0x02
|
|
bus=0, slot=29, func=0
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=17
|
|
Freeing (NOT implemented) redirected PCI irq 10.
|
|
Freeing (NOT implemented) redirected PCI irq 10.
|
|
map[20]: type 1, range 32, base 0000ff60, size 5
|
|
found-> vendor=0x8086, dev=0x2935, revid=0x02
|
|
bus=0, slot=29, func=1
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=b, irq=13
|
|
IOAPIC #0 intpin 18 -> irq 18
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
map[20]: type 1, range 32, base 0000ff40, size 5
|
|
found-> vendor=0x8086, dev=0x2936, revid=0x02
|
|
bus=0, slot=29, func=2
|
|
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=18
|
|
Freeing (NOT implemented) redirected PCI irq 5.
|
|
Freeing (NOT implemented) redirected PCI irq 5.
|
|
map[10]: type 1, range 32, base ff980800, size 10
|
|
found-> vendor=0x8086, dev=0x293a, revid=0x02
|
|
bus=0, slot=29, func=7
|
|
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=17
|
|
found-> vendor=0x8086, dev=0x244e, revid=0x92
|
|
bus=0, slot=30, func=0
|
|
class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
|
|
subordinatebus=5 secondarybus=5
|
|
found-> vendor=0x8086, dev=0x2916, revid=0x02
|
|
bus=0, slot=31, func=0
|
|
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
|
|
subordinatebus=0 secondarybus=0
|
|
IOAPIC #0 intpin 20 -> irq 19
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
map[10]: type 1, range 32, base 0000fe00, size 3
|
|
map[14]: type 1, range 32, base 0000fe10, size 2
|
|
map[18]: type 1, range 32, base 0000fe20, size 3
|
|
map[1c]: type 1, range 32, base 0000fe30, size 2
|
|
map[20]: type 1, range 32, base 0000fec0, size 5
|
|
map[24]: type 1, range 32, base ff970000, size 11
|
|
found-> vendor=0x8086, dev=0x2922, revid=0x02
|
|
bus=0, slot=31, func=2
|
|
class=[STORAGE]01-06-01, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=19
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
Freeing (NOT implemented) redirected PCI irq 3.
|
|
map[10]: type 1, range 64, base fdffbb00, size 8
|
|
map[20]: type 1, range 32, base 0000ece0, size 5
|
|
found-> vendor=0x8086, dev=0x2930, revid=0x02
|
|
bus=0, slot=31, func=3
|
|
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=19
|
|
pcib1.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib1: <PCI to PCI bridge (vendor=8086 device=29e1)> [tentative] irq 2 at device 1.0 on pci0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xd000-0xdfff
|
|
pcib1: memory decode 0xfa000000-0xfdefffff
|
|
pcib1: prefetched decode 0xd0000000-0xdfffffff
|
|
pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci1: <PCI bus> [tentative] on pcib1
|
|
pci1: pci_attach() physical bus=1
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
map[10]: type 1, range 32, base fc000000, size 24
|
|
map[14]: type 1, range 64, base d0000000, size 28
|
|
map[1c]: type 1, range 64, base fa000000, size 25
|
|
map[24]: type 1, range 32, base 0000dc80, size 7
|
|
found-> vendor=0x10de, dev=0x042f, revid=0xa1
|
|
bus=1, slot=0, func=0
|
|
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=2
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
nvidia0.pci1.pcib1.pci0.pcib0.legacypci0.nexus0.root0
|
|
nvidia0: <Quadro NVS 290> [tentative] port 0xdc80-0xdcff mem 0xfa000000-0xfbffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 2 at device 0.0 on pci1
|
|
pcib1: device nvidia0 requested decoded memory range 0xfc000000-0xfcffffff
|
|
pcib1: device nvidia0 requested decoded memory range 0xd0000000-0xdfffffff
|
|
pcib1: device nvidia0 requested decoded memory range 0xfa000000-0xfbffffff
|
|
nvidia0: <Quadro NVS 290> [attached!] port 0xdc80-0xdcff mem 0xfa000000-0xfbffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 2 at device 0.0 on pci1
|
|
pci1: <PCI bus> [attached!] on pcib1
|
|
pcib1: <PCI to PCI bridge (vendor=8086 device=29e1)> [attached!] irq 2 at device 1.0 on pci0
|
|
pcib2.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib2: <PCI to PCI bridge (vendor=8086 device=29e9)> [tentative] irq 2 at device 6.0 on pci0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: memory decode 0xfff00000-0xfffff
|
|
pcib2: prefetched decode 0xfff00000-0xfffff
|
|
pci2.pcib2.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci2: <PCI bus> [tentative] on pcib2
|
|
pci2: pci_attach() physical bus=2
|
|
pci2: <PCI bus> [attached!] on pcib2
|
|
pcib2: <PCI to PCI bridge (vendor=8086 device=29e9)> [attached!] irq 2 at device 6.0 on pci0
|
|
uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci0: <Intel 82801I (ICH9) USB controller> [tentative] port 0xff20-0xff3f irq 2 at device 26.0 on pci0
|
|
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb0: <Intel 82801I (ICH9) USB controller> [tentative] on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
|
|
usb0: <Intel 82801I (ICH9) USB controller> [attached!] on uhci0
|
|
uhci0: <Intel 82801I (ICH9) USB controller> [attached!] port 0xff20-0xff3f irq 2 at device 26.0 on pci0
|
|
uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci1: <Intel 82801I (ICH9) USB controller> [tentative] port 0xff00-0xff1f irq 13 at device 26.1 on pci0
|
|
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb1: <Intel 82801I (ICH9) USB controller> [tentative] on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
|
|
usb1: <Intel 82801I (ICH9) USB controller> [attached!] on uhci1
|
|
uhci1: <Intel 82801I (ICH9) USB controller> [attached!] port 0xff00-0xff1f irq 13 at device 26.1 on pci0
|
|
uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci2: <Intel 82801I (ICH9) USB controller> [tentative] port 0xecc0-0xecdf irq 16 at device 26.2 on pci0
|
|
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb2: <Intel 82801I (ICH9) USB controller> [tentative] on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
|
|
usb2: <Intel 82801I (ICH9) USB controller> [attached!] on uhci2
|
|
uhci2: <Intel 82801I (ICH9) USB controller> [attached!] port 0xecc0-0xecdf irq 16 at device 26.2 on pci0
|
|
pci0: <USB controller> (vendor=0x8086, dev=0x293c) at 26.7 irq 16
|
|
pci0: <unknown card> (vendor=0x8086, dev=0x293e) at 27.0 irq 2
|
|
pcib3.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib3: <PCI to PCI bridge (vendor=8086 device=2940)> [tentative] irq 2 at device 28.0 on pci0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0xf000-0xfff
|
|
pcib3: memory decode 0xf9f00000-0xf9ffffff
|
|
pcib3: prefetched decode 0xfff00000-0xfffff
|
|
pci3.pcib3.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci3: <PCI bus> [tentative] on pcib3
|
|
pci3: pci_attach() physical bus=3
|
|
pci3: <PCI bus> [attached!] on pcib3
|
|
pcib3: <PCI to PCI bridge (vendor=8086 device=2940)> [attached!] irq 2 at device 28.0 on pci0
|
|
pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib4: <PCI to PCI bridge (vendor=8086 device=294a)> [tentative] irq 13 at device 28.5 on pci0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0xf000-0xfff
|
|
pcib4: memory decode 0xf9e00000-0xf9efffff
|
|
pcib4: prefetched decode 0xfff00000-0xfffff
|
|
pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci4: <PCI bus> [tentative] on pcib4
|
|
pci4: pci_attach() physical bus=4
|
|
map[10]: type 1, range 64, base f9ef0000, size 16
|
|
found-> vendor=0x14e4, dev=0x167a, revid=0x02
|
|
bus=4, slot=0, func=0
|
|
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=10
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
bge0.pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
bge0: <Broadcom BCM5754 Gigabit Ethernet> [tentative] mem 0xf9ef0000-0xf9efffff irq 10 at device 0.0 on pci4
|
|
pcib4: device bge0 requested decoded memory range 0xf9ef0000-0xf9efffff
|
|
bge0: adjust device control 0x2106 -> 0x5106
|
|
bge0: CHIP ID 0xb0020000; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
|
|
bge0: Disabling fastboot
|
|
miibus0.bge0.pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on bge0
|
|
brgphy0.miibus0.bge0.pci4.pcib4.pci0.pcib0.legacypci0.nexus0.root0
|
|
brgphy0: <BCM5787 10/100/1000baseT PHY> [tentative] on miibus0
|
|
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
brgphy0: <BCM5787 10/100/1000baseT PHY> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on bge0
|
|
bge0: bpf attached
|
|
bge0: MAC address: 00:22:19:22:35:3a
|
|
bge0: <Broadcom BCM5754 Gigabit Ethernet> [attached!] mem 0xf9ef0000-0xf9efffff irq 10 at device 0.0 on pci4
|
|
pci4: <PCI bus> [attached!] on pcib4
|
|
pcib4: <PCI to PCI bridge (vendor=8086 device=294a)> [attached!] irq 13 at device 28.5 on pci0
|
|
uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci3: <Intel 82801I (ICH9) USB controller> [tentative] port 0xff80-0xff9f irq 17 at device 29.0 on pci0
|
|
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb3: <Intel 82801I (ICH9) USB controller> [tentative] on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
|
|
usb3: <Intel 82801I (ICH9) USB controller> [attached!] on uhci3
|
|
uhci3: <Intel 82801I (ICH9) USB controller> [attached!] port 0xff80-0xff9f irq 17 at device 29.0 on pci0
|
|
uhci4.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci4: <Intel 82801I (ICH9) USB controller> [tentative] port 0xff60-0xff7f irq 13 at device 29.1 on pci0
|
|
usb4.uhci4.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb4: <Intel 82801I (ICH9) USB controller> [tentative] on uhci4
|
|
usb4: USB revision 1.0
|
|
uhub4.usb4.uhci4.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
|
|
usb4: <Intel 82801I (ICH9) USB controller> [attached!] on uhci4
|
|
uhci4: <Intel 82801I (ICH9) USB controller> [attached!] port 0xff60-0xff7f irq 13 at device 29.1 on pci0
|
|
uhci5.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhci5: <Intel 82801I (ICH9) USB controller> [tentative] port 0xff40-0xff5f irq 18 at device 29.2 on pci0
|
|
usb5.uhci5.pci0.pcib0.legacypci0.nexus0.root0
|
|
usb5: <Intel 82801I (ICH9) USB controller> [tentative] on uhci5
|
|
usb5: USB revision 1.0
|
|
uhub5.usb5.uhci5.pci0.pcib0.legacypci0.nexus0.root0
|
|
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5
|
|
uhub5: 2 ports with 2 removable, self powered
|
|
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5
|
|
usb5: <Intel 82801I (ICH9) USB controller> [attached!] on uhci5
|
|
uhci5: <Intel 82801I (ICH9) USB controller> [attached!] port 0xff40-0xff5f irq 18 at device 29.2 on pci0
|
|
pci0: <USB controller> (vendor=0x8086, dev=0x293a) at 29.7 irq 17
|
|
pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcib5: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [tentative] at device 30.0 on pci0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0xf000-0xfff
|
|
pcib5: memory decode 0xf9d00000-0xf9dfffff
|
|
pcib5: prefetched decode 0xfff00000-0xfffff
|
|
pcib5: Subtractively decoded bridge.
|
|
pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
pci5: <PCI bus> [tentative] on pcib5
|
|
pci5: pci_attach() physical bus=5
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
Freeing (NOT implemented) redirected PCI irq 11.
|
|
map[10]: type 1, range 32, base f9dff000, size 12
|
|
found-> vendor=0x11c1, dev=0x5811, revid=0x70
|
|
bus=5, slot=4, func=0
|
|
class=[SERIALBUS]0c-00-10, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=2
|
|
fwohci0.pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
fwohci0: <Lucent FW322/323> [tentative] mem 0xf9dff000-0xf9dfffff irq 2 at device 4.0 on pci5
|
|
fwohci0: latency timer 64 -> 64.
|
|
fwohci0: cache size 16 -> 16.
|
|
pcib5: device fwohci0 requested decoded memory range 0xf9dff000-0xf9dfffff
|
|
fwohci0: OHCI version 1.0 (ROM=1)
|
|
fwohci0: No. of Isochronous channel is 8.
|
|
fwohci0: EUI64 00:05:3d:00:80:85:2d:27
|
|
fwohci0: resetting OHCI...done (loop=0)
|
|
fwohci0: phy read failed(1).
|
|
fwohci0: fwphy_rddata: 0x2 loop=1, retry=1
|
|
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
|
|
fwohci0: Phy 1394a available S400, 3 ports.
|
|
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
|
|
fwohci0: Enable 1394a Enhancements
|
|
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: Link S400, max_rec 2048 bytes.
|
|
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
|
|
fwohci0: fwohci_set_intr: 1
|
|
firewire0.fwohci0.pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
|
|
fwe0.firewire0.fwohci0.pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
fwe0: <Ethernet over FireWire> [tentative] on firewire0
|
|
fwe0: bpf attached
|
|
fwe0: MAC address: 02:05:3d:85:2d:27
|
|
fwe0: <Ethernet over FireWire> [attached!] on firewire0
|
|
sbp0.firewire0.fwohci0.pci5.pcib5.pci0.pcib0.legacypci0.nexus0.root0
|
|
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
|
|
sbp_attach (cold=1)
|
|
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
|
|
sbp_post_busreset
|
|
fwohci0: Initiate bus reset
|
|
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
|
|
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
|
|
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
|
|
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
|
|
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
|
|
firewire0: bus manager 0 (me)
|
|
send phy_config root_node=-1 gap_count=5
|
|
fwohci0: maxdesc: 2
|
|
fwohci0: start AT DMA status=0
|
|
fwohci0: <Lucent FW322/323> [attached!] mem 0xf9dff000-0xf9dfffff irq 2 at device 4.0 on pci5
|
|
pci5: <PCI bus> [attached!] on pcib5
|
|
pcib5: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> [attached!] at device 30.0 on pci0
|
|
isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI to ISA bridge (vendor=8086 device=2916)> [attached!] at device 31.0 on pci0
|
|
atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
atapci0: <Intel (ID=29228086) AHCI controller> [tentative] port 0xfec0-0xfedf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem 0xff970000-0xff9707ff irq 19 at device 31.2 on pci0
|
|
atapci0: AHCI Version 01.20 controller with 6 ports detected
|
|
ata2.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata2: <ATA channel 0> [tentative] on atapci0
|
|
ata2: SATA connect time=0ms
|
|
ata2: ahci_reset devices=0x1<ATA_MASTER>
|
|
Current DB 0
|
|
ch = 0
|
|
Current OP KEY INT BR len Addr Depend Stat: Cnt
|
|
c6b30000 OUTL ST2 ALL ALL 12 00000000 c6b30080 8411:0007 RUN,ACTIVE, ack complete(11)
|
|
0x000000e0 0x00450000 0xffbaffff 0x00000000
|
|
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
|
|
ad4: Intel check1 failed
|
|
ad4: Adaptec check1 failed
|
|
ad4: LSI (v3) check1 failed
|
|
ad4: LSI (v2) check1 failed
|
|
ad4: FreeBSD check1 failed
|
|
ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA5BA> at ata2-master SATA300
|
|
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata2: <ATA channel 0> [attached!] on atapci0
|
|
ata3.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata3: <ATA channel 1> [tentative] on atapci0
|
|
ata3: SATA connect time=0ms
|
|
ata3: ahci_reset devices=0x1<ATA_MASTER>
|
|
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
|
|
ad6: Intel check1 failed
|
|
ad6: Adaptec check1 failed
|
|
ad6: LSI (v3) check1 failed
|
|
ad6: LSI (v2) check1 failed
|
|
ad6: FreeBSD check1 failed
|
|
ad6: 476940MB <Seagate ST3500620AS DE12> at ata3-master SATA300
|
|
ad6: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata3: <ATA channel 1> [attached!] on atapci0
|
|
ata4.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata4: <ATA channel 2> [tentative] on atapci0
|
|
ata4: SATA connect time=0ms
|
|
ata4: ahci_reset devices=0x4<ATAPI_MASTER>
|
|
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
|
|
ata4: device_reset timeout=170us
|
|
acd0: <HL-DT-ST DVD+/-RW GSA-H73N/C108> DVDR drive at ata4 as master
|
|
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
|
|
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
|
|
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
|
|
acd0: Audio: play, 255 volume levels
|
|
acd0: Mechanism: ejectable tray, unlocked
|
|
acd0: Medium: no/blank disc
|
|
ata4: <ATA channel 2> [attached!] on atapci0
|
|
ata5.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata5: <ATA channel 3> [tentative] on atapci0
|
|
ata5: SATA connect status=00000004
|
|
ata5: ahci_reset devices=0x0
|
|
ata5: <ATA channel 3> [attached!] on atapci0
|
|
ata6.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata6: <ATA channel 4> [tentative] on atapci0
|
|
ata6: SATA connect status=00000004
|
|
ata6: ahci_reset devices=0x0
|
|
ata6: <ATA channel 4> [attached!] on atapci0
|
|
ata7.atapci0.pci0.pcib0.legacypci0.nexus0.root0
|
|
ata7: <ATA channel 5> [tentative] on atapci0
|
|
ata7: SATA connect status=00000004
|
|
ata7: ahci_reset devices=0x0
|
|
ata7: <ATA channel 5> [attached!] on atapci0
|
|
atapci0: <Intel (ID=29228086) AHCI controller> [attached!] port 0xfec0-0xfedf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem 0xff970000-0xff9707ff irq 19 at device 31.2 on pci0
|
|
pci0: <unknown card> (vendor=0x8086, dev=0x2930) at 31.3 irq 19
|
|
pci0: <PCI bus> [attached!] on pcib0
|
|
pcib0: <Host to PCI bridge> [attached!] on legacypci0
|
|
legacypci0 [attached!] on motherboard
|
|
atkbdc-: atkbdc0 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
orm0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xccfff,0xcd000-0xcefff,0xcf000-0xd17ff,0xd1800-0xd3fff on isa0
|
|
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xccfff,0xcd000-0xcefff,0xcf000-0xd17ff,0xd1800-0xd3fff on isa0
|
|
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
|
|
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
isa_probe_children: probing PnP devices
|
|
SMP: enabled INTs: 0, 1, 2, 9, 10, 12, 13, 16, 17, 18, apic_imen: 0x00f8c9f8
|
|
BIOS Geometries:
|
|
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
|
|
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
|
|
0 accounted for
|
|
Device configuration finished.
|
|
bus_explore done
|
|
sbp_post_explore
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
crypto: assign driver 0, flags 2
|
|
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
|
|
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
|
|
(probe0:ata2:0:0:0): error 22
|
|
(probe0:ata2:0:0:0): Unretryable Error
|
|
(probe1:sbp0:0:0:0): error 22
|
|
(probe1:sbp0:0:0:0): Unretryable Error
|
|
(probe1:sbp0:0:1:0): error 22
|
|
(probe1:sbp0:0:1:0): Unretryable Error
|
|
(probe1:sbp0:0:2:0): error 22
|
|
(probe1:sbp0:0:2:0): Unretryable Error
|
|
(probe1:sbp0:0:3:0): error 22
|
|
(probe1:sbp0:0:3:0): Unretryable Error
|
|
(probe1:sbp0:0:4:0): error 22
|
|
(probe1:sbp0:0:4:0): Unretryable Error
|
|
(probe1:sbp0:0:5:0): error 22
|
|
(probe1:sbp0:0:5:0): Unretryable Error
|
|
(probe1:sbp0:0:6:0): error 22
|
|
(probe1:sbp0:0:6:0): Unretryable Error
|
|
(probe0:ata2:0:0:0): error 6
|
|
(probe0:ata2:0:0:0): Unretryable Error
|
|
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
|
|
(probe0:ata2:0:0:0): error 22
|
|
(probe0:ata2:0:0:0): Unretryable Error
|
|
pass0 at ata2 bus 0 target 0 lun 0
|
|
pass0: <HL-DT-ST DVD+-RW GSA-H73N C108> Removable CD-ROM SCSI-0 device
|
|
pass0: 3.300MB/s transfers
|
|
bootdev: a0200000 type=0 unit=0 slice=2 part=0 major=3
|
|
(cd0:ata2:0:0:0): error 6
|
|
(cd0:ata2:0:0:0): Unretryable Error
|
|
cd0 at ata2 bus 0 target 0 lun 0
|
|
cd0: <HL-DT-ST DVD+-RW GSA-H73N C108> Removable CD-ROM SCSI-0 device
|
|
cd0: 3.300MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
|
|
ad4s1: type 0xa5, start 63, end = 976773167, size 976773105 : OK
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:/dev/ad4s1a
|
|
ad4s1: type 0xa5, start 63, end = 976773167, size 976773105 : OK
|
|
start_init: trying /sbin/init
|
|
bge0: Disabling fastboot
|
|
bge0: link UP
|
|
killlwps: waiting for 10 lwps of pid 1120 to die
|
|
killlwps: waiting for 8 lwps of pid 1120 to die
|
|
killlwps: waiting for 6 lwps of pid 1121 to die
|
|
killlwps: waiting for 5 lwps of pid 1121 to die
|
|
killlwps: waiting for 1 lwps of pid 1121 to die
|
|
pci0: driver added
|
|
found-> vendor=0x8086, dev=0x293c, revid=0x02
|
|
bus=0, slot=26, func=7
|
|
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=16
|
|
pci0:26:7: reprobing on driver added
|
|
found-> vendor=0x8086, dev=0x293e, revid=0x02
|
|
bus=0, slot=27, func=0
|
|
class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=2
|
|
PCI Express ver.1 cap=0x0091
|
|
pci0:27:0: reprobing on driver added
|
|
pcm0.pci0.pcib0.legacypci0.nexus0.root0
|
|
pcm0: <Intel 82801I High Definition Audio Controller> [tentative] mem 0xfdffc000-0xfdffffff irq 2 at device 27.0 on pci0
|
|
pcm0: Mixer "vol":
|
|
pcm0: Mixer "pcm":
|
|
pcm0: Mixer "speaker":
|
|
pcm0: Mixer "line":
|
|
pcm0: Mixer "mic":
|
|
pcm0: Mixer "rec":
|
|
pcm0: sndbuf_setmap 18000, 4000; 0xe33d8000 -> 18000
|
|
pcm0: sndbuf_setmap 1c000, 4000; 0xe36d2000 -> 1c000
|
|
pcm0: <HDA Codec: Analog Devices AD1984>
|
|
pcm0: <HDA Driver Revision: 20071129_0050>
|
|
pcm0: <Intel 82801I High Definition Audio Controller> [attached!] mem 0xfdffc000-0xfdffffff irq 2 at device 27.0 on pci0
|
|
found-> vendor=0x8086, dev=0x293a, revid=0x02
|
|
bus=0, slot=29, func=7
|
|
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=a, irq=17
|
|
pci0:29:7: reprobing on driver added
|
|
found-> vendor=0x8086, dev=0x2930, revid=0x02
|
|
bus=0, slot=31, func=3
|
|
class=[SERIALBUS]0c-05-00, hdrtype=0x00, mfdev=0
|
|
subordinatebus=0 secondarybus=0
|
|
intpin=c, irq=19
|
|
pci0:31:3: reprobing on driver added
|
|
pci1: driver added
|
|
pci2: driver added
|
|
pci3: driver added
|
|
pci4: driver added
|
|
pci5: driver added
|
|
killlwps: waiting for 2 lwps of pid 1919 to die
|
|
killlwps: waiting for 1 lwps of pid 1919 to die
|
|
killlwps: waiting for 2 lwps of pid 4790 to die
|
|
killlwps: waiting for 16 lwps of pid 2061 to die
|
|
killlwps: waiting for 12 lwps of pid 2061 to die
|
|
killlwps: waiting for 8 lwps of pid 2061 to die
|
|
killlwps: waiting for 5 lwps of pid 4781 to die
|
|
killlwps: waiting for 2 lwps of pid 4781 to die
|
|
killlwps: waiting for 2 lwps of pid 6853 to die
|
|
killlwps: waiting for 2 lwps of pid 7359 to die
|
|
killlwps: waiting for 2 lwps of pid 7388 to die
|
|
killlwps: waiting for 1 lwps of pid 7388 to die
|
|
killlwps: waiting for 2 lwps of pid 7442 to die
|
|
killlwps: waiting for 1 lwps of pid 7442 to die
|
|
killlwps: waiting for 2 lwps of pid 7456 to die
|
|
killlwps: waiting for 1 lwps of pid 7456 to die
|
|
killlwps: waiting for 2 lwps of pid 7713 to die
|
|
killlwps: waiting for 2 lwps of pid 7993 to die
|
|
killlwps: waiting for 2 lwps of pid 9617 to die
|
|
killlwps: waiting for 1 lwps of pid 9617 to die
|
|
killlwps: waiting for 2 lwps of pid 9775 to die
|
|
killlwps: waiting for 1 lwps of pid 9775 to die
|
|
killlwps: waiting for 2 lwps of pid 57206 to die
|
|
killlwps: waiting for 1 lwps of pid 57206 to die
|
|
killlwps: waiting for 2 lwps of pid 57645 to die
|
|
killlwps: waiting for 1 lwps of pid 57645 to die
|
|
killlwps: waiting for 2 lwps of pid 57659 to die
|
|
killlwps: waiting for 1 lwps of pid 57659 to die
|
|
killlwps: waiting for 2 lwps of pid 57678 to die
|
|
killlwps: waiting for 2 lwps of pid 57700 to die
|
|
killlwps: waiting for 2 lwps of pid 57747 to die
|
|
killlwps: waiting for 1 lwps of pid 57747 to die
|
|
killlwps: waiting for 2 lwps of pid 56879 to die
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 15803/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 17113/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 17019/20000 hz, livelock removed
|
|
bge0: watchdog timeout -- resetting
|
|
bge0: Disabling fastboot
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 17426/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 17344/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 17258/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
intr 13 at 16944/20000 hz, livelock removed
|
|
intr 13 at 40001/40000 hz, livelocked limit engaged!
|
|
bge0: link UP
|
|
intr 13 at 14516/20000 hz, livelock removed
|
|
killlwps: waiting for 3 lwps of pid 57081 to die
|
|
killlwps: waiting for 2 lwps of pid 57081 to die
|
|
killlwps: waiting for 2 lwps of pid 59655 to die
|