|
Copyright (c) 2003-2009 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly 7949e03-DEVELOPMENT #0: Sat Aug 22 01:30:43 CEST 2009
|
|
root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
|
|
Calibrating clock(s) ... TSC clock: 2493991065 Hz, i8254 clock: 1193297 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2493.76-MHz 686-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
|
|
Hyperthreading: 4 logical CPUs
|
|
real memory = 1073283072 (1048128K bytes)
|
|
Physical memory chunk(s):
|
|
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
|
|
0x00855000 - 0x3ff7ffff, 1064480768 bytes (259883 pages)
|
|
avail memory = 1027813376 (1003724K bytes)
|
|
bios32: Found BIOS32 Service Directory header at 0xc00f0000
|
|
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
|
|
pcibios: PCI BIOS entry at 0x31
|
|
pnpbios: Found PnP BIOS data at 0xc00f5d80
|
|
pnpbios: Entry = f0000:6e0a Rev = 1.0
|
|
Other BIOS signatures found:
|
|
Preloaded elf kernel "/boot/kernel" at 0xc0828000.
|
|
Preloaded elf module "/boot/modules/acpi.ko" at 0xc08282c4.
|
|
crypto: <crypto core>
|
|
wlan: <802.11 Link Layer>
|
|
Pentium Pro MTRR support enabled
|
|
fildesc_drvinit() building stdin, stdout, stderr:
|
|
md0: Malloc disk
|
|
Math emulator present
|
|
ACPI: RSDP 0xf9be0 00024 (v2 HP )
|
|
ACPI: XSDT 0x3ffa0100 0007C (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: FACP 0x3ffa0290 000F4 (v4 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: DSDT 0x3ffa0690 04EDE (v2 HP ProLiant 00000073 INTL 20051117)
|
|
ACPI: FACS 0x3ffae000 00040
|
|
ACPI: APIC 0x3ffa0390 00092 (v2 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: MCFG 0x3ffa0480 0003C (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: SPMI 0x3ffa04c0 00041 (v5 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: SLIC 0x3ffa0510 00176 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: OEMB 0x3ffae040 00071 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: HPET 0x3ffa5570 00038 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: EINJ 0x3ffa55b0 00130 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: BERT 0x3ffa5740 00030 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: ERST 0x3ffa5770 001B0 (v1 HP ProLiant 20081002 HP 00000097)
|
|
ACPI: HEST 0x3ffa5920 000A8 (v1 HP ProLiant 20081002 HP 00000097)
|
|
npx0.nexus0.root0
|
|
npx0: <math processor> [tentative] on motherboard
|
|
npx0: INT 16 interface
|
|
Using XMM optimized bcopy/copyin/copyout
|
|
npx0: <math processor> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <HP ProLiant> [tentative] on motherboard
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008058
|
|
pci_open(1a): mode1res=0x80000000 (0x80000000)
|
|
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=65c08086)
|
|
pcibios: BIOS version 3.00
|
|
AcpiOsDerivePciId: bus 0 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 0 dev 31 func 0
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
ACPI timer looks GOOD min = 3, max = 4, width = 1
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
cpu_cst0: switching to generic Cx mode
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: configured irq 4 not in bitmap of probed irqs 0
|
|
sio0: irq maps: 0 0 0 0
|
|
sio0.acpi0.nexus0.root0
|
|
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi0: <HP ProLiant> [attached!] at irq 9 on motherboard
|
|
pcib0.legacy0.nexus0.root0
|
|
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
|
|
pir0.legacy0.nexus0.root0
|
|
pir0: <PCI Interrupt Routing Table: 21 Entries> [tentative] on motherboard
|
|
$PIR: Links after initial probe:
|
|
Link IRQ Rtd Ref IRQs
|
|
0x60 255 N 17 5 6 7 10 11 12 14 15
|
|
0x61 255 N 16 5 6 7 10 11 12 14 15
|
|
0x62 255 N 19 5 6 7 10 11 12 14 15
|
|
0x63 255 N 18 5 6 7 10 11 12 14 15
|
|
0x68 255 N 1 5 6 7 10 11 12 14 15
|
|
0x6b 255 N 1 5 6 7 10 11 12 14 15
|
|
0x69 255 N 1 5 6 7 10 11 12 14 15
|
|
$PIR: Found matching pin for 0.31.INTB at func 2: 5
|
|
$PIR: Found matching pin for 0.31.INTC at func 3: 15
|
|
$PIR: Found matching pin for 0.29.INTA at func 0: 7
|
|
$PIR: Found matching pin for 0.29.INTB at func 1: 5
|
|
$PIR: Found matching pin for 0.29.INTC at func 2: 15
|
|
$PIR: Found matching pin for 0.26.INTA at func 0: 11
|
|
$PIR: Found matching pin for 0.26.INTB at func 1: 14
|
|
$PIR: Found matching pin for 0.26.INTC at func 7: 15
|
|
$PIR: Found matching pin for 0.26.INTD at func 2: 5
|
|
$PIR: Found matching pin for 0.28.INTA at func 0: 11
|
|
$PIR: Found matching pin for 0.28.INTB at func 5: 10
|
|
$PIR: Found matching pin for 7.0.INTA at func 0: 10
|
|
$PIR: Found matching pin for 8.0.INTA at func 0: 11
|
|
$PIR: Found matching pin for 5.0.INTA at func 0: 11
|
|
$PIR: Links after initial IRQ discovery:
|
|
Link IRQ Rtd Ref IRQs
|
|
0x60 11 Y 17 5 6 7 10 11 12 14 15
|
|
0x61 10 Y 16 5 6 7 10 11 12 14 15
|
|
0x62 15 Y 19 5 6 7 10 11 12 14 15
|
|
0x63 5 Y 18 5 6 7 10 11 12 14 15
|
|
0x68 255 N 1 5 6 7 10 11 12 14 15
|
|
0x6b 7 Y 1 5 6 7 10 11 12 14 15
|
|
0x69 14 Y 1 5 6 7 10 11 12 14 15
|
|
$PIR: IRQs used by BIOS: 5 7 10 11 14 15
|
|
$PIR: Interrupt Weights:
|
|
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
|
|
[ 0 0 0 0 0 18 0 1 0 0 16 17 0 0 1 19 ]
|
|
pir0: <PCI Interrupt Routing Table: 21 Entries> [attached!] on motherboard
|
|
pci0.pcib0.legacy0.nexus0.root0
|
|
pci0: <PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x65c0, revid=0x80
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x8086, dev=0x65e2, revid=0x80
|
|
domain=0, bus=0, slot=2, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00200c80
|
|
found-> vendor=0x8086, dev=0x65e3, revid=0x80
|
|
domain=0, bus=0, slot=3, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00180c80
|
|
found-> vendor=0x8086, dev=0x65f8, revid=0x80
|
|
domain=0, bus=0, slot=4, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00300cdf[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x65e5, revid=0x80
|
|
domain=0, bus=0, slot=5, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x8086, dev=0x65e6, revid=0x80
|
|
domain=0, bus=0, slot=6, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00280cdf[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x65e7, revid=0x80
|
|
domain=0, bus=0, slot=7, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x8086, dev=0x65f0, revid=0x80
|
|
domain=0, bus=0, slot=16, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f0, revid=0x80
|
|
domain=0, bus=0, slot=16, func=1
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f0, revid=0x80
|
|
domain=0, bus=0, slot=16, func=2
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f1, revid=0x80
|
|
domain=0, bus=0, slot=17, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f3, revid=0x80
|
|
domain=0, bus=0, slot=19, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f5, revid=0x80
|
|
domain=0, bus=0, slot=21, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x65f6, revid=0x80
|
|
domain=0, bus=0, slot=22, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2937, revid=0x02
|
|
domain=0, bus=0, slot=26, func=0
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2938, revid=0x02
|
|
domain=0, bus=0, slot=26, func=1
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=14
|
|
map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2939, revid=0x02
|
|
domain=0, bus=0, slot=26, func=2
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=5
|
|
map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x293c, revid=0x02
|
|
domain=0, bus=0, slot=26, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=15
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xfccffc00, size 10, enabled
|
|
found-> vendor=0x8086, dev=0x2940, revid=0x02
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2948, revid=0x02
|
|
domain=0, bus=0, slot=28, func=4
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x4810, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x294a, revid=0x02
|
|
domain=0, bus=0, slot=28, func=5
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2934, revid=0x02
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
map[20]: type I/O Port, range 32, base 0xd080, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2935, revid=0x02
|
|
domain=0, bus=0, slot=29, func=1
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=5
|
|
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2936, revid=0x02
|
|
domain=0, bus=0, slot=29, func=2
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=15
|
|
map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x244e, revid=0x92
|
|
domain=0, bus=0, slot=30, func=0
|
|
class=06-04-01, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2916, revid=0x02
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2920, revid=0x02
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=01-01-8f, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=5
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
|
|
map[24]: type I/O Port, range 32, base 0xb400, size 4, enabled
|
|
found-> vendor=0x8086, dev=0x2930, revid=0x02
|
|
domain=0, bus=0, slot=31, func=3
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=15
|
|
map[10]: type Memory, range 64, base 0xffffffc00, size 8, enabled
|
|
pci0: pci0:0:31:3 bar 0x10 too many address bits map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2926, revid=0x02
|
|
domain=0, bus=0, slot=31, func=5
|
|
class=01-01-85, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=5
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0xcc00, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0xc880, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xc800, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xc480, size 4, enabled
|
|
map[24]: type I/O Port, range 32, base 0xc400, size 4, enabled
|
|
pcib1.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib1: <PCIBIOS PCI-PCI bridge> [tentative] at device 2.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0x0-0x0
|
|
pcib1: no prefetched decode
|
|
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
|
|
pci1: <PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
pci1: <PCI bus> [attached!] on pcib1
|
|
pcib1: <PCIBIOS PCI-PCI bridge> [attached!] at device 2.0 on pci0
|
|
pcib2.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib2: <PCIBIOS PCI-PCI bridge> [tentative] at device 3.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0x0-0x0
|
|
pcib2: no prefetched decode
|
|
pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
|
|
pci2: <PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
pci2: <PCI bus> [attached!] on pcib2
|
|
pcib2: <PCIBIOS PCI-PCI bridge> [attached!] at device 3.0 on pci0
|
|
pcib3.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib3: <PCIBIOS PCI-PCI bridge> [tentative] at device 4.0 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0x0-0x0
|
|
pcib3: no prefetched decode
|
|
pcib3: Disable PCI Express hot-plug interrupts(0x002f)
|
|
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
|
|
pci3: <PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
pci3: <PCI bus> [attached!] on pcib3
|
|
pcib3: <PCIBIOS PCI-PCI bridge> [attached!] at device 4.0 on pci0
|
|
pcib4.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib4: <PCI-PCI bridge> [tentative] at device 5.0 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0x0-0x0
|
|
pcib4: no prefetched decode
|
|
pci4.pcib4.pci0.pcib0.legacy0.nexus0.root0
|
|
pci4: <PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
pci4: <PCI bus> [attached!] on pcib4
|
|
pcib4: <PCI-PCI bridge> [attached!] at device 5.0 on pci0
|
|
pcib5.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib5: <PCIBIOS PCI-PCI bridge> [tentative] at device 6.0 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0xe000-0xefff
|
|
pcib5: memory decode 0xfcd00000-0xfcefffff
|
|
pcib5: no prefetched decode
|
|
pcib5: Disable PCI Express hot-plug interrupts(0x002f)
|
|
pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
|
|
pci5: <PCI bus> [tentative] on pcib5
|
|
pci5: domain=0, physical bus=5
|
|
found-> vendor=0x103c, dev=0x3230, revid=0x03
|
|
domain=0, bus=5, slot=0, func=0
|
|
class=01-04-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D1 D3 current D0
|
|
MSI-X supports 4 messages in map 0x10
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
map[10]: type Memory, range 64, base 0xfce00000, size 20, enabled
|
|
pcib5: requested memory range 0xfce00000-0xfcefffff: good
|
|
map[18]: type I/O Port, range 32, base 0xe800, size 8, enabled
|
|
pcib5: requested I/O range 0xe800-0xe8ff: in range
|
|
map[1c]: type Memory, range 64, base 0xfcdff000, size 12, enabled
|
|
pcib5: requested memory range 0xfcdff000-0xfcdfffff: good
|
|
ciss0.pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
|
|
ciss0: <HP Smart Array P400> [tentative] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5
|
|
ciss0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xfce00000
|
|
ciss0: using 256 of 1024 available commands
|
|
ciss0: firmware 4.12
|
|
ciss0: 1 SCSI channels
|
|
ciss0: signature 'CISS'
|
|
ciss0: valence 3
|
|
ciss0: supported I/O methods 0x80000006<simple,performant>
|
|
ciss0: active I/O method 0x3<simple>
|
|
ciss0: 4G page base 0x00000000
|
|
ciss0: interrupt coalesce delay 1000us
|
|
ciss0: interrupt coalesce count 16
|
|
ciss0: max outstanding commands 1024
|
|
ciss0: bus types 0x200000
|
|
ciss0: server name ''
|
|
ciss0: heartbeat 0xdc
|
|
ciss0: 4 physical devices
|
|
ciss0: 1 logical drive
|
|
ciss0: logical drive (b0t0): RAID 5, 858112MB online
|
|
ciss0: <HP Smart Array P400> [attached!] port 0xe800-0xe8ff mem 0xfcdff000-0xfcdfffff,0xfce00000-0xfcefffff irq 11 at device 0.0 on pci5
|
|
pci5: <PCI bus> [attached!] on pcib5
|
|
pcib5: <PCIBIOS PCI-PCI bridge> [attached!] at device 6.0 on pci0
|
|
pcib6.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib6: <PCI-PCI bridge> [tentative] at device 7.0 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 6
|
|
pcib6: subordinate bus 6
|
|
pcib6: I/O decode 0x0-0x0
|
|
pcib6: no prefetched decode
|
|
pci6.pcib6.pci0.pcib0.legacy0.nexus0.root0
|
|
pci6: <PCI bus> [tentative] on pcib6
|
|
pci6: domain=0, physical bus=6
|
|
pci6: <PCI bus> [attached!] on pcib6
|
|
pcib6: <PCI-PCI bridge> [attached!] at device 7.0 on pci0
|
|
uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci0: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd800-0xd81f irq 11 at device 26.0 on pci0
|
|
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
|
|
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
usb0: <Intel 82801I (ICH9) USB controller> [tentative] on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
|
|
usb0: <Intel 82801I (ICH9) USB controller> [attached!] on uhci0
|
|
uhci0: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd800-0xd81f irq 11 at device 26.0 on pci0
|
|
uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci1: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd880-0xd89f irq 14 at device 26.1 on pci0
|
|
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
|
|
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
usb1: <Intel 82801I (ICH9) USB controller> [tentative] on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
|
|
usb1: <Intel 82801I (ICH9) USB controller> [attached!] on uhci1
|
|
uhci1: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd880-0xd89f irq 14 at device 26.1 on pci0
|
|
uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci2: <Intel 82801I (ICH9) USB controller> [tentative] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0
|
|
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
|
|
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
usb2: <Intel 82801I (ICH9) USB controller> [tentative] on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
|
|
usb2: <Intel 82801I (ICH9) USB controller> [attached!] on uhci2
|
|
uhci2: <Intel 82801I (ICH9) USB controller> [attached!] port 0xdc00-0xdc1f irq 5 at device 26.2 on pci0
|
|
pci0: <serial bus, USB> (vendor 0x8086, dev 0x293c) at device 26.7 irq 15
|
|
pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib7: <PCIBIOS PCI-PCI bridge> [tentative] irq 11 at device 28.0 on pci0
|
|
pcib7: domain 0
|
|
pcib7: secondary bus 9
|
|
pcib7: subordinate bus 9
|
|
pcib7: I/O decode 0x0-0x0
|
|
pcib7: no prefetched decode
|
|
pci9.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
pci9: <PCI bus> [tentative] on pcib7
|
|
pci9: domain=0, physical bus=9
|
|
pci9: <PCI bus> [attached!] on pcib7
|
|
pcib7: <PCIBIOS PCI-PCI bridge> [attached!] irq 11 at device 28.0 on pci0
|
|
pcib8.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib8: <PCIBIOS PCI-PCI bridge> [tentative] irq 11 at device 28.4 on pci0
|
|
pcib8: domain 0
|
|
pcib8: secondary bus 8
|
|
pcib8: subordinate bus 8
|
|
pcib8: I/O decode 0xf000-0xfff
|
|
pcib8: memory decode 0xfd000000-0xfdffffff
|
|
pcib8: prefetched decode 0xfb000000-0xfbffffff
|
|
pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0
|
|
pci8: <PCI bus> [tentative] on pcib8
|
|
pci8: domain=0, physical bus=8
|
|
found-> vendor=0x102b, dev=0x0522, revid=0x02
|
|
domain=0, bus=8, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x1010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0011[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 32, base 0xfb000000, size 24, enabled
|
|
pcib8: requested memory range 0xfb000000-0xfbffffff: good
|
|
map[14]: type Memory, range 32, base 0xfdffc000, size 14, enabled
|
|
pcib8: requested memory range 0xfdffc000-0xfdffffff: good
|
|
map[18]: type Memory, range 32, base 0xfd000000, size 23, enabled
|
|
pcib8: requested memory range 0xfd000000-0xfd7fffff: good
|
|
vgapci0.pci8.pcib8.pci0.pcib0.legacy0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8
|
|
vgapci0: <VGA-compatible display> [attached!] mem 0xfd000000-0xfd7fffff,0xfdffc000-0xfdffffff,0xfb000000-0xfbffffff irq 11 at device 0.0 on pci8
|
|
pci8: <PCI bus> [attached!] on pcib8
|
|
pcib8: <PCIBIOS PCI-PCI bridge> [attached!] irq 11 at device 28.4 on pci0
|
|
pcib9.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib9: <PCIBIOS PCI-PCI bridge> [tentative] irq 10 at device 28.5 on pci0
|
|
pcib9: domain 0
|
|
pcib9: secondary bus 7
|
|
pcib9: subordinate bus 7
|
|
pcib9: I/O decode 0x0-0x0
|
|
pcib9: memory decode 0xfcf00000-0xfcffffff
|
|
pcib9: no prefetched decode
|
|
pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
|
|
pci7: <PCI bus> [tentative] on pcib9
|
|
pci7: domain=0, physical bus=7
|
|
found-> vendor=0x14e4, dev=0x165a, revid=0x00
|
|
domain=0, bus=7, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
map[10]: type Memory, range 64, base 0xfcff0000, size 16, enabled
|
|
pcib9: requested memory range 0xfcff0000-0xfcffffff: good
|
|
bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
|
|
bge0: <Broadcom BCM5722 Gigabit Ethernet> [tentative] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7
|
|
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfcff0000
|
|
bge0: adjust device control 0x2000 -> 0x5000
|
|
bge0: CHIP ID 0xa2000000; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
|
|
bge0: Disabling fastboot
|
|
alignment check failed
|
|
miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on bge0
|
|
ukphy0.miibus0.bge0.pci7.pcib9.pci0.pcib0.legacy0.nexus0.root0
|
|
ukphy0: <Generic IEEE 802.3u media interface> [tentative] on miibus0
|
|
ukphy0: OUI 0x0050ef, model 0x002d, rev. 0
|
|
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
ukphy0: <Generic IEEE 802.3u media interface> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on bge0
|
|
md0: reading primary partition table: error accessing offset 000000000000 for 512
|
|
bge0: bpf attached
|
|
bge0: MAC address: 00:21:5a:bc:34:29
|
|
bge0: <Broadcom BCM5722 Gigabit Ethernet> [attached!] mem 0xfcff0000-0xfcffffff irq 10 at device 0.0 on pci7
|
|
pci7: <PCI bus> [attached!] on pcib9
|
|
pcib9: <PCIBIOS PCI-PCI bridge> [attached!] irq 10 at device 28.5 on pci0
|
|
uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci3: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd080-0xd09f irq 7 at device 29.0 on pci0
|
|
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd080
|
|
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
usb3: <Intel 82801I (ICH9) USB controller> [tentative] on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
|
|
usb3: <Intel 82801I (ICH9) USB controller> [attached!] on uhci3
|
|
uhci3: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd080-0xd09f irq 7 at device 29.0 on pci0
|
|
uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci4: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd400-0xd41f irq 5 at device 29.1 on pci0
|
|
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
|
|
usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
usb4: <Intel 82801I (ICH9) USB controller> [tentative] on uhci4
|
|
usb4: USB revision 1.0
|
|
uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
|
|
usb4: <Intel 82801I (ICH9) USB controller> [attached!] on uhci4
|
|
uhci4: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd400-0xd41f irq 5 at device 29.1 on pci0
|
|
uhci5.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci5: <Intel 82801I (ICH9) USB controller> [tentative] port 0xd480-0xd49f irq 15 at device 29.2 on pci0
|
|
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480
|
|
usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
|
|
usb5: <Intel 82801I (ICH9) USB controller> [tentative] on uhci5
|
|
usb5: USB revision 1.0
|
|
uhub5.usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5
|
|
uhub5: 2 ports with 2 removable, self powered
|
|
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5
|
|
usb5: <Intel 82801I (ICH9) USB controller> [attached!] on uhci5
|
|
uhci5: <Intel 82801I (ICH9) USB controller> [attached!] port 0xd480-0xd49f irq 15 at device 29.2 on pci0
|
|
pcib10.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib10: <PCIBIOS PCI-PCI bridge> [tentative] at device 30.0 on pci0
|
|
pcib10: domain 0
|
|
pcib10: secondary bus 10
|
|
pcib10: subordinate bus 10
|
|
pcib10: I/O decode 0x0-0x0
|
|
pcib10: no prefetched decode
|
|
pcib10: Subtractively decoded bridge.
|
|
pci10.pcib10.pci0.pcib0.legacy0.nexus0.root0
|
|
pci10: <PCI bus> [tentative] on pcib10
|
|
pci10: domain=0, physical bus=10
|
|
pci10: <PCI bus> [attached!] on pcib10
|
|
pcib10: <PCIBIOS PCI-PCI bridge> [attached!] at device 30.0 on pci0
|
|
isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
atapci0: <Intel ICH9 SATA300 controller> [tentative] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0
|
|
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
|
|
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb400
|
|
ata2.atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ata2: <ATA channel 0> [tentative] on atapci0
|
|
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
|
|
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
|
|
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
|
|
ata2: <ATA channel 0> [attached!] on atapci0
|
|
ata3.atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ata3: <ATA channel 1> [tentative] on atapci0
|
|
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
|
|
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
|
|
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
|
|
ata3: <ATA channel 1> [attached!] on atapci0
|
|
atapci0: <Intel ICH9 SATA300 controller> [attached!] port 0xb400-0xb40f,0xb480-0xb48f,0xb800-0xb803,0xb880-0xb887,0xbc00-0xbc03,0xc000-0xc007 irq 5 at device 31.2 on pci0
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2930) at device 31.3 irq 15
|
|
atapci1.pci0.pcib0.legacy0.nexus0.root0
|
|
atapci1: <Intel ICH9 SATA300 controller> [tentative] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0
|
|
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc480
|
|
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc400
|
|
ata4.atapci1.pci0.pcib0.legacy0.nexus0.root0
|
|
ata4: <ATA channel 0> [tentative] on atapci1
|
|
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd000
|
|
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc00
|
|
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
|
|
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
|
|
ata4: reiniting channel ..
|
|
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
|
|
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
|
|
ata4: reinit done ..
|
|
ukbd0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [tentative] on uhub3
|
|
kbd: new array size 4
|
|
kbd1 at ukbd0
|
|
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
|
|
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [attached!] on uhub3
|
|
ums0.uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [tentative] on uhub3
|
|
ums0: 8 buttons and Z dir.
|
|
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> [attached!] on uhub3
|
|
ata4: reiniting channel ..
|
|
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
|
|
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
|
|
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
|
|
ata4: reinit done ..
|
|
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
|
|
acd0: <Optiarc DVD RW AD-7561S/AH52> DVDR drive at ata4 as master
|
|
acd0: read 4134KB/s (4134KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, SATA150
|
|
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
|
|
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
|
|
acd0: Audio: play, 256 volume levels
|
|
acd0: Mechanism: ejectable tray, unlocked
|
|
acd0: Medium: CD-RW 120mm data disc
|
|
ata4: <ATA channel 0> [attached!] on atapci1
|
|
ata5.atapci1.pci0.pcib0.legacy0.nexus0.root0
|
|
ata5: <ATA channel 1> [tentative] on atapci1
|
|
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc880
|
|
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc800
|
|
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
|
|
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
|
|
ata5: <ATA channel 1> [attached!] on atapci1
|
|
atapci1: <Intel ICH9 SATA300 controller> [attached!] port 0xc400-0xc40f,0xc480-0xc48f,0xc800-0xc803,0xc880-0xc887,0xcc00-0xcc03,0xd000-0xd007 irq 5 at device 31.5 on pci0
|
|
pci0: <PCI bus> [attached!] on pcib0
|
|
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
|
|
ex_isa_identify()
|
|
ahc_isa_probe 0: ioport 0xc00 alloc failed
|
|
ahc_isa_probe 11: ioport 0xbc00 alloc failed
|
|
ahc_isa_probe 12: ioport 0xcc00 alloc failed
|
|
ahc_isa_probe 13: ioport 0xdc00 alloc failed
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
fdc0: ready for input in output
|
|
fdc0: cmd 3 failed at out byte 1 of 3
|
|
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x330
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x334
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x230
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x234
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x130
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x134
|
|
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: keyboard ID 0x41ab (2)
|
|
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
ppc0: parallel port not found.
|
|
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
ed0: not probed (disabled)
|
|
fe0: not probed (disabled)
|
|
ie0: not probed (disabled)
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
BIOS Geometries:
|
|
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
|
|
0 accounted for
|
|
Device configuration finished.
|
|
acd0: reading primary partition table: error accessing offset 000000000000 for 2048
|
|
sl0: bpf attached
|
|
crypto: assign driver 0, flags 2
|
|
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
(probe0:ata2:0:0:0): error 22
|
|
(probe0:ata2:0:0:0): Unretryable Error
|
|
ppp0: bpf attached
|
|
ip: MPSAFE
|
|
arp: MPSAFE
|
|
(probe1:ata2:0:0:0): error 22
|
|
(probe1:ata2:0:0:0): Unretryable Error
|
|
pass0 at ciss0 bus 0 target 0 lun 0
|
|
pass0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
pass0: Serial Number PA53COMPAQ RAID
|
|
pass0: 135.168MB/s transfers
|
|
pass1 at ata2 bus 0 target 0 lun 0
|
|
pass1: <Optiarc DVD RW AD-7561S AH52> Removable CD-ROM SCSI-0 device
|
|
pass1: 3.300MB/s transfers
|
|
da0 at ciss0 bus 0 target 0 lun 0
|
|
da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
da0: Serial Number PA53COMPAQ RAID
|
|
da0: 135.168MB/s transfers
|
|
da0: 858210MB (1757614684 512 byte sectors: 255H 32S/T 65535C)
|
|
cd0 at ata2 bus 0 target 0 lun 0
|
|
cd0: <Optiarc DVD RW AD-7561S AH52> Removable CD-ROM SCSI-0 device
|
|
cd0: 3.300MB/s transfers
|
|
cd0: cd present [235950 x 2048 byte records]
|
|
bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1
|
|
ATA PseudoRAID loaded
|
|
tempname: type 0xa5, start 63, end = 1757613311, size 1757613249 : OK
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
Mounting root from cd9660:cd0
|
|
tryroot cd0
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
iso_mountroot(): using session at block 0
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
tempname: invalid primary partition table: no magic
|
|
umass0.uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
umass0: <Imation Imation USB, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub4
|
|
umass0:6:0:-1: Attached to scbus6
|
|
umass0: <Imation Imation USB, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub4
|
|
pass8 at umass-sim0 bus 0 target 0 lun 0
|
|
pass8: <Imation Imation USB PMAP> Removable Direct Access SCSI-0 device
|
|
pass8: 1.000MB/s transfers
|
|
da8 at umass-sim0 bus 0 target 0 lun 0
|
|
da8: <Imation Imation USB PMAP> Removable Direct Access SCSI-0 device
|
|
da8: 1.000MB/s transfers
|
|
da8: 983MB (2013184 512 byte sectors: 64H 32S/T 983C)
|
|
tempname: type 0xe, start 32, end = 2013183, size 2013152 : OK
|