|
Copyright (c) 2003-2009 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly v2.4.1-RELEASE #7: Wed Sep 30 18:16:27 PDT 2009
|
|
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src-misc/sys/AMD64_GENERIC
|
|
Calibrating clock(s) ... TSC clock: 2394039420 Hz, i8254 clock: 1193201 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
AMD Features=0x20100800<SYSCALL,NX,LM>
|
|
AMD Features2=0x1<LAHF>
|
|
Cores per package: 2
|
|
real memory = 5301600256 (5177344K bytes)
|
|
Physical memory chunk(s):
|
|
0x00001000 - 0x00098fff, 622592 bytes (152 pages)
|
|
0x00f32000 - 0xbfeaffff, 3203915776 bytes (782206 pages)
|
|
0x100000000 - 0x13bfeffff, 1006567424 bytes (245744 pages)
|
|
avail memory = 3939692544 (3847356K bytes)
|
|
Preloaded elf kernel "/boot/kernel" at 0xffffffff80f08000.
|
|
Preloaded elf obj module "/boot/modules/acpi.ko" at 0xffffffff80f083e8.
|
|
crypto: <crypto core>
|
|
wlan: <802.11 Link Layer>
|
|
kbd: new array size 4
|
|
kbd1 at kbdmux0
|
|
fildesc_drvinit() building stdin, stdout, stderr:
|
|
md0: Malloc disk
|
|
ACPI: RSDP 0xf68c0 00024 (v2 LENOVO)
|
|
ACPI: XSDT 0xbfebb62b 00094 (v1 LENOVO TP-7L 00002260 LTP 00000000)
|
|
ACPI: FACP 0xbfebb700 000F4 (v3 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-625
|
|
ACPI Warning: Optional field Gpe1Block has zero address or length: 0 102C/0 20090521 tbfadt-655
|
|
ACPI: DSDT 0xbfebbb1d 10025 (v1 LENOVO TP-7L 00002260 MSFT 03000000)
|
|
ACPI: FACS 0xbfee4000 00040
|
|
ACPI: SSDT 0xbfebb8b4 00269 (v1 LENOVO TP-7L 00002260 MSFT 03000000)
|
|
ACPI: ECDT 0xbfecbb42 00052 (v1 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI: TCPA 0xbfecbb94 00032 (v2 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI: APIC 0xbfecbbc6 00068 (v1 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI: MCFG 0xbfecbc2e 0003C (v1 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI: HPET 0xbfecbc6a 00038 (v1 LENOVO TP-7L 00002260 LNVO 00000001)
|
|
ACPI: SLIC 0xbfecbdf0 00176 (v1 LENOVO TP-7L 00002260 LTP 00000000)
|
|
ACPI: BOOT 0xbfecbf66 00028 (v1 LENOVO TP-7L 00002260 LTP 00000001)
|
|
ACPI: ASF! 0xbfecbf8e 00072 (v16 LENOVO TP-7L 00002260 PTL 00000001)
|
|
ACPI: SSDT 0xbfee271b 0025F (v1 LENOVO TP-7L 00002260 INTL 20050513)
|
|
ACPI: SSDT 0xbfee297a 000A6 (v1 LENOVO TP-7L 00002260 INTL 20050513)
|
|
ACPI: SSDT 0xbfee2a20 004F7 (v1 LENOVO TP-7L 00002260 INTL 20050513)
|
|
ACPI: SSDT 0xbfee2f17 001D8 (v1 LENOVO TP-7L 00002260 INTL 20050513)
|
|
acpi0.nexus0.root0
|
|
acpi0: <LENOVO TP-7L> [tentative] on motherboard
|
|
acpi_ec0.acpi0.nexus0.root0
|
|
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [tentative] port 0x66,0x62 on acpi0
|
|
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> [attached!] port 0x66,0x62 on acpi0
|
|
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f880
|
|
pci_open(1a): mode1res=0x80000000 (0x80000000)
|
|
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086)
|
|
AcpiOsDerivePciId: bus 0 dev 0 func 0
|
|
AcpiOsDerivePciId: bus 0 dev 29 func 7
|
|
AcpiOsDerivePciId: bus 0 dev 26 func 7
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
AcpiOsDerivePciId: bus 0 dev 31 func 0
|
|
acpi_ec0: info: new max delay is 80 us
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 5, width = 0
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
ACPI timer looks GOOD min = 5, max = 6, width = 1
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
ACPI: SSDT 0xbfee1ebd 0085E (v1 PmRef Cpu0Cst 00000100 INTL 20050513)
|
|
ACPI: SSDT 0xbfee1b32 00306 (v1 PmRef Cpu0Ist 00000100 INTL 20050513)
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: Unsupported _PSD NumProcessors (2)
|
|
device_probe_and_attach: cpu_pst0 attach returned 6
|
|
cpu0: <ACPI CPU> [attached!] port 0x1015,0x1014 on acpi0
|
|
acpi_tz0.acpi0.nexus0.root0
|
|
acpi_tz0: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz0: <Thermal Zone> [attached!] on acpi0
|
|
acpi_tz1.acpi0.nexus0.root0
|
|
acpi_tz1: <Thermal Zone> [tentative] on acpi0
|
|
acpi_tz1: <Thermal Zone> [attached!] on acpi0
|
|
acpi_lid0.acpi0.nexus0.root0
|
|
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
|
|
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Sleep Button> [tentative] on acpi0
|
|
acpi_button0: <Sleep Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
acpi_ec0: info: new max delay is 90 us
|
|
acpi_ec0: info: new max delay is 120 us
|
|
unknown: not probed (disabled)
|
|
atkbdc0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0.atkbdc0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0047
|
|
atkbd: keyboard ID 0x54ab (2)
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
|
|
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
|
|
psm0: current command byte:0047
|
|
psm0.atkbdc0.acpi0.nexus0.root0
|
|
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
|
|
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
|
|
psm0: config:00000000, flags:00000000, packet size:3
|
|
psm0: syncmask:c0, syncbits:00
|
|
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: irq maps: 0 0x10 0 0
|
|
sio0.acpi0.nexus0.root0
|
|
sio0 [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0 [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
ppc0: using extended I/O port range
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
battery0.acpi0.nexus0.root0
|
|
battery0: <ACPI Control Method Battery> [tentative] on acpi0
|
|
battery0: <ACPI Control Method Battery> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
acpi_acad0.acpi0.nexus0.root0
|
|
acpi_acad0: <AC Adapter> [tentative] on acpi0
|
|
acpi_acad0: <AC Adapter> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ppc0: using extended I/O port range
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi0: <LENOVO TP-7L> [attached!] at irq 9 on motherboard
|
|
pcib0.legacy0.nexus0.root0
|
|
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
|
|
pci0.pcib0.legacy0.nexus0.root0
|
|
pci0: <PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x2a00, revid=0x0c
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2a01, revid=0x0c
|
|
domain=0, bus=0, slot=1, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=6
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x000c25c0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x1049, revid=0x03
|
|
domain=0, bus=0, slot=25, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 32, base 0xfe200000, size 17, enabled
|
|
map[14]: type Memory, range 32, base 0xfe225000, size 12, enabled
|
|
map[18]: type I/O Port, range 32, base 0x1840, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2834, revid=0x03
|
|
domain=0, bus=0, slot=26, func=0
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2835, revid=0x03
|
|
domain=0, bus=0, slot=26, func=1
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=3
|
|
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x283a, revid=0x03
|
|
domain=0, bus=0, slot=26, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xfe226c00, size 10, enabled
|
|
found-> vendor=0x8086, dev=0x284b, revid=0x03
|
|
domain=0, bus=0, slot=27, func=0
|
|
class=04-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0091
|
|
map[10]: type Memory, range 64, base 0xfe220000, size 14, enabled
|
|
found-> vendor=0x8086, dev=0x283f, revid=0x03
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2841, revid=0x03
|
|
domain=0, bus=0, slot=28, func=1
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=3
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2843, revid=0x03
|
|
domain=0, bus=0, slot=28, func=2
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0020a0e0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2845, revid=0x03
|
|
domain=0, bus=0, slot=28, func=3
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0028a0e0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2847, revid=0x03
|
|
domain=0, bus=0, slot=28, func=4
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
|
|
found-> vendor=0x8086, dev=0x2830, revid=0x03
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=6
|
|
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2831, revid=0x03
|
|
domain=0, bus=0, slot=29, func=1
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2832, revid=0x03
|
|
domain=0, bus=0, slot=29, func=2
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled
|
|
found-> vendor=0x8086, dev=0x2836, revid=0x03
|
|
domain=0, bus=0, slot=29, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xfe227000, size 10, enabled
|
|
found-> vendor=0x8086, dev=0x2448, revid=0xf3
|
|
domain=0, bus=0, slot=30, func=0
|
|
class=06-04-01, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2811, revid=0x03
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x2850, revid=0x03
|
|
domain=0, bus=0, slot=31, func=1
|
|
class=01-01-8a, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=255
|
|
map[20]: type I/O Port, range 32, base 0x1830, size 4, enabled
|
|
found-> vendor=0x8086, dev=0x2829, revid=0x03
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=6
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 4 messages
|
|
map[10]: type I/O Port, range 32, base 0x1c48, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0x1c1c, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0x1c40, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0x1c18, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0x1c20, size 5, enabled
|
|
map[24]: type Memory, range 32, base 0xfe226000, size 11, enabled
|
|
found-> vendor=0x8086, dev=0x283e, revid=0x03
|
|
domain=0, bus=0, slot=31, func=3
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
map[10]: type Memory, range 32, base 0xfe227400, size 8, enabled
|
|
map[20]: type I/O Port, range 32, base 0x1c60, size 5, enabled
|
|
pcib1.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib1: <PCI-PCI bridge> [tentative] irq 6 at device 1.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0x2000-0x2fff
|
|
pcib1: memory decode 0xd0000000-0xd2ffffff
|
|
pcib1: prefetched decode 0xe0000000-0xefffffff
|
|
pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
|
|
pci1: <PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
found-> vendor=0x10de, dev=0x040c, revid=0xa1
|
|
domain=0, bus=1, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=6
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
map[10]: type Memory, range 32, base 0xd2000000, size 24, enabled
|
|
pcib1: requested memory range 0xd2000000-0xd2ffffff: good
|
|
map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
|
|
pcib1: requested memory range 0xe0000000-0xefffffff: good
|
|
map[1c]: type Memory, range 64, base 0xd0000000, size 25, enabled
|
|
pcib1: requested memory range 0xd0000000-0xd1ffffff: good
|
|
map[24]: type I/O Port, range 32, base 0x2000, size 7, enabled
|
|
pcib1: requested I/O range 0x2000-0x207f: in range
|
|
vgapci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0x2000-0x207f mem 0xd0000000-0xd1ffffff,0xe0000000-0xefffffff,0xd2000000-0xd2ffffff irq 6 at device 0.0 on pci1
|
|
vgapci0: <VGA-compatible display> [attached!] port 0x2000-0x207f mem 0xd0000000-0xd1ffffff,0xe0000000-0xefffffff,0xd2000000-0xd2ffffff irq 6 at device 0.0 on pci1
|
|
pci1: <PCI bus> [attached!] on pcib1
|
|
pcib1: <PCI-PCI bridge> [attached!] irq 6 at device 1.0 on pci0
|
|
em0.pci0.pcib0.legacy0.nexus0.root0
|
|
em0: <Intel(R) PRO/1000 Network Connection ICH8_IGP_M_AMT 6.9.6> [tentative] port 0x1840-0x185f mem 0xfe225000-0xfe225fff,0xfe200000-0xfe21ffff irq 5 at device 25.0 on pci0
|
|
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe200000
|
|
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe225000
|
|
battery0: battery initialization start
|
|
acpi_ec0: info: new max delay is 270 us
|
|
battery0: battery initialization done, tried 1 times
|
|
acpi_acad0: acline initialization start
|
|
acpi_acad0: On Line
|
|
acpi_acad0: acline initialization done, tried 1 times
|
|
em0: bpf attached
|
|
em0: MAC address: 00:1c:25:1e:00:6d
|
|
em0: <Intel(R) PRO/1000 Network Connection ICH8_IGP_M_AMT 6.9.6> [attached!] port 0x1840-0x185f mem 0xfe225000-0xfe225fff,0xfe200000-0xfe21ffff irq 5 at device 25.0 on pci0
|
|
uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci0: <Intel 82801H (ICH8) USB controller USB-D> [tentative] port 0x1860-0x187f irq 5 at device 26.0 on pci0
|
|
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
|
|
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
usb0: <Intel 82801H (ICH8) USB controller USB-D> [tentative] on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
|
|
usb0: <Intel 82801H (ICH8) USB controller USB-D> [attached!] on uhci0
|
|
uhci0: <Intel 82801H (ICH8) USB controller USB-D> [attached!] port 0x1860-0x187f irq 5 at device 26.0 on pci0
|
|
uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci1: <Intel 82801H (ICH8) USB controller USB-E> [tentative] port 0x1880-0x189f irq 3 at device 26.1 on pci0
|
|
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
|
|
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
usb1: <Intel 82801H (ICH8) USB controller USB-E> [tentative] on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
|
|
usb1: <Intel 82801H (ICH8) USB controller USB-E> [attached!] on uhci1
|
|
uhci1: <Intel 82801H (ICH8) USB controller USB-E> [attached!] port 0x1880-0x189f irq 3 at device 26.1 on pci0
|
|
pci0: <serial bus, USB> (vendor 0x8086, dev 0x283a) at device 26.7 irq 11
|
|
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 11
|
|
pcib2.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib2: <PCI-PCI bridge> [tentative] irq 5 at device 28.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0x3000-0x3fff
|
|
pcib2: memory decode 0xdc100000-0xdf2fffff
|
|
pcib2: prefetched decode 0xdfd00000-0xdfdfffff
|
|
pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0
|
|
pci2: <PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
found-> vendor=0x8086, dev=0x444e, revid=0x01
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=05-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0211[LEGDEV]
|
|
map[10]: type Memory, range 32, base 0xdf2ffc00, size 10, enabled
|
|
pcib2: requested memory range 0xdf2ffc00-0xdf2fffff: good
|
|
map[18]: type I/O Port, range 32, base 0x3000, size 7, enabled
|
|
pcib2: requested I/O range 0x3000-0x307f: in range
|
|
pci2: <memory> (vendor 0x8086, dev 0x444e) at device 0.0 irq 5
|
|
pci2: <PCI bus> [attached!] on pcib2
|
|
pcib2: <PCI-PCI bridge> [attached!] irq 5 at device 28.0 on pci0
|
|
pcib3.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib3: <PCI-PCI bridge> [tentative] irq 3 at device 28.1 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0x4000-0x4fff
|
|
pcib3: memory decode 0xd4000000-0xd7dfffff
|
|
pcib3: prefetched decode 0xdfa00000-0xdfafffff
|
|
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
|
|
pci3: <PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
found-> vendor=0x8086, dev=0x4230, revid=0x61
|
|
domain=0, bus=3, slot=0, func=0
|
|
class=02-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=3
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
map[10]: type Memory, range 64, base 0xd7dfe000, size 13, enabled
|
|
pcib3: requested memory range 0xd7dfe000-0xd7dfffff: good
|
|
pci3: <network> (vendor 0x8086, dev 0x4230) at device 0.0 irq 3
|
|
pci3: <PCI bus> [attached!] on pcib3
|
|
pcib3: <PCI-PCI bridge> [attached!] irq 3 at device 28.1 on pci0
|
|
pcib4.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib4: <PCI-PCI bridge> [tentative] irq 11 at device 28.2 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0x5000-0x5fff
|
|
pcib4: memory decode 0xfc000000-0xfdffffff
|
|
pcib4: prefetched decode 0xf8000000-0xf80fffff
|
|
pci4.pcib4.pci0.pcib0.legacy0.nexus0.root0
|
|
pci4: <PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
pci4: <PCI bus> [attached!] on pcib4
|
|
pcib4: <PCI-PCI bridge> [attached!] irq 11 at device 28.2 on pci0
|
|
pcib5.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib5: <PCI-PCI bridge> [tentative] irq 10 at device 28.3 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 12
|
|
pcib5: I/O decode 0x6000-0x6fff
|
|
pcib5: memory decode 0xd8000000-0xd9ffffff
|
|
pcib5: prefetched decode 0xdf700000-0xdf7fffff
|
|
pcib5: Disable PCI Express hot-plug interrupts(0x0028)
|
|
pci5.pcib5.pci0.pcib0.legacy0.nexus0.root0
|
|
pci5: <PCI bus> [tentative] on pcib5
|
|
pci5: domain=0, physical bus=5
|
|
pci5: <PCI bus> [attached!] on pcib5
|
|
pcib5: <PCI-PCI bridge> [attached!] irq 10 at device 28.3 on pci0
|
|
pcib6.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib6: <PCI-PCI bridge> [tentative] irq 5 at device 28.4 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 13
|
|
pcib6: subordinate bus 20
|
|
pcib6: I/O decode 0x7000-0x7fff
|
|
pcib6: memory decode 0xcc000000-0xcdffffff
|
|
pcib6: prefetched decode 0xdf400000-0xdf4fffff
|
|
pci13.pcib6.pci0.pcib0.legacy0.nexus0.root0
|
|
pci13: <PCI bus> [tentative] on pcib6
|
|
pci13: domain=0, physical bus=13
|
|
pci13: <PCI bus> [attached!] on pcib6
|
|
pcib6: <PCI-PCI bridge> [attached!] irq 5 at device 28.4 on pci0
|
|
uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci2: <Intel 82801H (ICH8) USB controller USB-A> [tentative] port 0x18a0-0x18bf irq 6 at device 29.0 on pci0
|
|
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
|
|
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
usb2: <Intel 82801H (ICH8) USB controller USB-A> [tentative] on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
|
|
usb2: <Intel 82801H (ICH8) USB controller USB-A> [attached!] on uhci2
|
|
uhci2: <Intel 82801H (ICH8) USB controller USB-A> [attached!] port 0x18a0-0x18bf irq 6 at device 29.0 on pci0
|
|
uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci3: <Intel 82801H (ICH8) USB controller USB-B> [tentative] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
|
|
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
|
|
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
usb3: <Intel 82801H (ICH8) USB controller USB-B> [tentative] on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
|
|
usb3: <Intel 82801H (ICH8) USB controller USB-B> [attached!] on uhci3
|
|
uhci3: <Intel 82801H (ICH8) USB controller USB-B> [attached!] port 0x18c0-0x18df irq 11 at device 29.1 on pci0
|
|
uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
uhci4: <Intel 82801H (ICH8) USB controller USB-C> [tentative] port 0x18e0-0x18ff irq 7 at device 29.2 on pci0
|
|
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0
|
|
usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
usb4: <Intel 82801H (ICH8) USB controller USB-C> [tentative] on uhci4
|
|
usb4: USB revision 1.0
|
|
uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
|
|
uhub4: 2 ports with 2 removable, self powered
|
|
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
|
|
usb4: <Intel 82801H (ICH8) USB controller USB-C> [attached!] on uhci4
|
|
uhci4: <Intel 82801H (ICH8) USB controller USB-C> [attached!] port 0x18e0-0x18ff irq 7 at device 29.2 on pci0
|
|
pci0: <serial bus, USB> (vendor 0x8086, dev 0x2836) at device 29.7 irq 11
|
|
pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
pcib7: <PCI-PCI bridge> [tentative] at device 30.0 on pci0
|
|
pcib7: domain 0
|
|
pcib7: secondary bus 21
|
|
pcib7: subordinate bus 24
|
|
pcib7: I/O decode 0x8000-0xbfff
|
|
pcib7: no prefetched decode
|
|
pcib7: Subtractively decoded bridge.
|
|
pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
pci21: <PCI bus> [tentative] on pcib7
|
|
pci21: domain=0, physical bus=21
|
|
found-> vendor=0x1180, dev=0x0476, revid=0xba
|
|
domain=0, bus=21, slot=0, func=0
|
|
class=06-07-00, hdrtype=0x02, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
|
|
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
|
|
intpin=a, irq=6
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8100000, size 12, enabled
|
|
pcib7: requested memory range 0xf8100000-0xf8100fff: good
|
|
found-> vendor=0x1180, dev=0x0832, revid=0x04
|
|
domain=0, bus=21, slot=0, func=1
|
|
class=0c-00-10, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8101000, size 11, enabled
|
|
pcib7: requested memory range 0xf8101000-0xf81017ff: good
|
|
found-> vendor=0x1180, dev=0x0822, revid=0x21
|
|
domain=0, bus=21, slot=0, func=2
|
|
class=08-05-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8101800, size 8, enabled
|
|
pcib7: requested memory range 0xf8101800-0xf81018ff: good
|
|
found-> vendor=0x1180, dev=0x0843, revid=0x11
|
|
domain=0, bus=21, slot=0, func=3
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8101c00, size 8, enabled
|
|
pcib7: requested memory range 0xf8101c00-0xf8101cff: good
|
|
found-> vendor=0x1180, dev=0x0592, revid=0x11
|
|
domain=0, bus=21, slot=0, func=4
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8102000, size 8, enabled
|
|
pcib7: requested memory range 0xf8102000-0xf81020ff: good
|
|
found-> vendor=0x1180, dev=0x0852, revid=0x11
|
|
domain=0, bus=21, slot=0, func=5
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf8102400, size 8, enabled
|
|
pcib7: requested memory range 0xf8102400-0xf81024ff: good
|
|
cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
cbb0: <RF5C476 PCI-CardBus Bridge> [tentative] mem 0xf8100000-0xf8100fff irq 6 at device 0.0 on pci21
|
|
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8100000
|
|
cardbus0.cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
cardbus0: <CardBus bus> [tentative] on cbb0
|
|
cardbus0: <CardBus bus> [attached!] on cbb0
|
|
pccard0.cbb0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
pccard0: <16-bit PCCard bus> [tentative] on cbb0
|
|
pccard0: <16-bit PCCard bus> [attached!] on cbb0
|
|
cbb0: PCI Configuration space:
|
|
0x00: 0x04761180 0x02100007 0x060700ba 0x00822008
|
|
0x10: 0xf8100000 0x020000dc 0xb0181615 0xfffff000
|
|
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
|
|
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000106
|
|
0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000
|
|
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
|
|
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
|
|
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
|
|
0x80: 0x04a00001 0x00000000 0x04630463 0x00000000
|
|
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
|
|
0xa0: 0x00000000 0x09000000 0x00f00000 0x00000003
|
|
0xb0: 0x00000000 0x60000000 0x00003000 0x00000000
|
|
0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000
|
|
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
|
|
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
|
|
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
|
|
cbb0: <RF5C476 PCI-CardBus Bridge> [attached!] mem 0xf8100000-0xf8100fff irq 6 at device 0.0 on pci21
|
|
fwohci0: vendor=1180, dev=832
|
|
fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
fwohci0: <1394 Open Host Controller Interface> [tentative] mem 0xf8101000-0xf81017ff irq 11 at device 0.1 on pci21
|
|
fwohci0: latency timer 32 -> 32.
|
|
fwohci0: cache size 0 -> 8.
|
|
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8101000
|
|
fwohci0: OHCI version 1.10 (ROM=0)
|
|
fwohci0: No. of Isochronous channel is 4.
|
|
fwohci0: EUI64 00:01:6c:20:00:37:0b:88
|
|
fwohci0: resetting OHCI...done (loop=0)
|
|
fwohci0: fwphy_rddata: 0x2 loop=22, retry=0
|
|
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
|
|
fwohci0: Phy 1394a available S400, 1 ports.
|
|
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
|
|
fwohci0: Enable 1394a Enhancements
|
|
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
|
|
fwohci0: Link S400, max_rec 2048 bytes.
|
|
fwohci0: BUS_OPT 0xf864a242 -> 0xf864a242
|
|
fwohci0: fwohci_set_intr: 1
|
|
firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
|
|
fwe0.firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
fwe0: <Ethernet over FireWire> [tentative] on firewire0
|
|
fwe0: bpf attached
|
|
fwe0: MAC address: 02:01:6c:37:0b:88
|
|
fwe0: <Ethernet over FireWire> [attached!] on firewire0
|
|
sbp0.firewire0.fwohci0.pci21.pcib7.pci0.pcib0.legacy0.nexus0.root0
|
|
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
|
|
sbp_attach (cold=1)
|
|
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
|
|
sbp_post_busreset
|
|
fwohci0: Initiate bus reset
|
|
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
|
|
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
|
|
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
|
|
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
|
|
firewire0: bus manager 0 (me)
|
|
send phy_config root_node=-1 gap_count=5
|
|
fwohci0: maxdesc: 2
|
|
fwohci0: start AT DMA status=0
|
|
Current DB 0
|
|
ch = 0
|
|
Current OP KEY INT BR len Addr Depend Stat: Cnt
|
|
0117c000 OUTL ST2 ALL ALL 12 00000000 0117c080 8411:000a RUN,ACTIVE, ack complete(11)
|
|
0x000000e0 0x00450000 0xffbaffff 0x00000000
|
|
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
|
|
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
|
|
fwohci0: <1394 Open Host Controller Interface> [attached!] mem 0xf8101000-0xf81017ff irq 11 at device 0.1 on pci21
|
|
pci21: <base peripheral, SD host controller> (vendor 0x1180, dev 0x0822) at device 0.2 irq 7
|
|
pci21: <base peripheral> (vendor 0x1180, dev 0x0843) at device 0.3 irq 7
|
|
pci21: <base peripheral> (vendor 0x1180, dev 0x0592) at device 0.4 irq 7
|
|
pci21: <base peripheral> (vendor 0x1180, dev 0x0852) at device 0.5 irq 7
|
|
pci21: <PCI bus> [attached!] on pcib7
|
|
pcib7: <PCI-PCI bridge> [attached!] at device 30.0 on pci0
|
|
isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
atapci0: <Intel ATA controller> [tentative] port 0x1830-0x183f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
|
|
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1830
|
|
ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ata0: <ATA channel 0> [tentative] on atapci0
|
|
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
|
|
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
|
|
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
|
|
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
|
|
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
|
|
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
|
|
uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub5: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [tentative] on uhub1
|
|
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
|
|
uhub5: 7 ports with 7 removable, self powered
|
|
uhub5: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [attached!] on uhub1
|
|
ad0: Intel check1 failed
|
|
ad0: Adaptec check1 failed
|
|
ad0: LSI (v3) check1 failed
|
|
ad0: LSI (v2) check1 failed
|
|
ugen0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [tentative] on uhub0
|
|
ad0: FreeBSD check1 failed
|
|
ad0: 238475MB <SAMSUNG HM251JJ 2AA00 00> at ata0-master UDMA33
|
|
ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
|
|
ata0: <ATA channel 0> [attached!] on atapci0
|
|
ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ata1: <ATA channel 1> [tentative] on atapci0
|
|
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
|
|
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
|
|
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
|
|
ata1: <ATA channel 1> [attached!] on atapci0
|
|
atapci0: <Intel ATA controller> [attached!] port 0x1830-0x183f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
|
|
ahci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0x1c20-0x1c3f,0x1c18-0x1c1b,0x1c40-0x1c47,0x1c1c-0x1c1f,0x1c48-0x1c4f mem 0xfe226000-0xfe2267ff irq 6 at device 31.2 on pci0
|
|
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfe226000
|
|
ad0: invalid primary partition table: no magic
|
|
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [attached!] on uhub0
|
|
bus_explore done
|
|
sbp_post_explore
|
|
umass0.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
umass0: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [tentative] on uhub5
|
|
umass0:3:0:-1: Attached to scbus3
|
|
umass0: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [attached!] on uhub5
|
|
uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [tentative] on uhub5
|
|
uhub6: 4 ports with 4 removable, self powered
|
|
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [attached!] on uhub5
|
|
ukbd0.uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub6
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x350000
|
|
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub6
|
|
ums0.uhub6.uhub5.uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
|
|
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub6
|
|
ums0: 5 buttons and Z dir.
|
|
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub6
|
|
ahci0: Intel hocus pocus
|
|
ahci0: AHCI 1.1 capabilities 0xe710ff82<S64A,NCQ,SSNTF,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS>, 3 ports, 32 tags/port, gen 1 (1.5Gbps)
|
|
ahci0.0: START HARDRESET
|
|
ahci0.0: END HARDRESET 0
|
|
ahci0.0: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.0: sig 00000101
|
|
ahci0.0: END SOFTRESET
|
|
ahci0.2: START HARDRESET
|
|
ahci0.0: Found DISK "HITACHI HTS722016K9SA00 DCDZC75A" serial="071103DP1D10DGG5YHJP"
|
|
ahci0.0: tags=32/32 satacap=1702 satafea=005e NCQ=YES capacity=152627.83MB
|
|
ahci0.0: f85=7469 f86=bc09 f87=6163 WC=enabled RA=enabled SEC=frozen
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
ahci0.2: Port appears to be unplugged
|
|
ahci0.2: No device detected
|
|
ahci0.2: END HARDRESET 19
|
|
(probe0:ahci0:2:0:0): error 22
|
|
(probe0:ahci0:2:0:0): Unretryable Error
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0x1c20-0x1c3f,0x1c18-0x1c1b,0x1c40-0x1c47,0x1c1c-0x1c1f,0x1c48-0x1c4f mem 0xfe226000-0xfe2267ff irq 6 at device 31.2 on pci0
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 10
|
|
pci0: <PCI bus> [attached!] on pcib0
|
|
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
|
|
ex_isa_identify()
|
|
ahc_isa_probe 1: ioport 0x1c00 alloc failed
|
|
atkbdc-: atkbdc0 exists, using next available unit number
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x330
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x334
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x230
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x234
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x130
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x134
|
|
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0: status reg test failed ff
|
|
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aic0 [tentative] failed to probe on isa0
|
|
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
|
|
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
ppc0: cannot reserve I/O port range
|
|
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
intr 3 at 40001/40000 hz, livelocked limit engaged!
|
|
sl0: bpf attached
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
crypto: assign driver 0, flags 2
|
|
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
|
|
ppp0: bpf attached
|
|
ip: MPSAFE
|
|
arp: MPSAFE
|
|
CAM: Configuring bus: sbp0
|
|
CAM: Configuring bus: ata0
|
|
CAM: Configuring bus: ata1
|
|
CAM: Configuring bus: umass-sim0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 6 busses
|
|
(probe0:sbp0:0:0:0): error 22
|
|
(probe0:sbp0:0:0:0): Unretryable Error
|
|
(probe0:sbp0:0:1:0): error 22
|
|
(probe0:sbp0:0:1:0): Unretryable Error
|
|
(probe0:sbp0:0:2:0): error 22
|
|
(probe0:sbp0:0:2:0): Unretryable Error
|
|
(probe0:sbp0:0:3:0): error 22
|
|
(probe0:sbp0:0:3:0): Unretryable Error
|
|
(probe0:sbp0:0:4:0): error 22
|
|
(probe0:sbp0:0:4:0): Unretryable Error
|
|
(probe0:sbp0:0:5:0): error 22
|
|
(probe0:sbp0:0:5:0): Unretryable Error
|
|
(probe0:sbp0:0:6:0): error 22
|
|
(probe0:sbp0:0:6:0): Unretryable Error
|
|
CAM: Finished configuring bus: sbp0
|
|
CAM: Finished configuring bus: ata0
|
|
CAM: Finished configuring bus: ata1
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:2:0:0): error 22
|
|
(probe0:ahci0:2:0:0): Unretryable Error
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: Finished configuring bus: umass-sim0
|
|
CAM: finished configuring all busses (0 left)
|
|
pass8 at umass-sim0 bus 0 target 0 lun 0
|
|
pass8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
pass8: 1.000MB/s transfers
|
|
pass0 at ahci0 bus 0 target 0 lun 0
|
|
pass0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device
|
|
pass0: Serial Number 071103DP1D10DGG5YHJP
|
|
pass0: 150.000MB/s transfers
|
|
sg8 at umass-sim0 bus 0 target 0 lun 0
|
|
sg8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
sg8: 1.000MB/s transfers
|
|
sg0 at ahci0 bus 0 target 0 lun 0
|
|
sg0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device
|
|
sg0: Serial Number 071103DP1D10DGG5YHJP
|
|
sg0: 150.000MB/s transfers
|
|
da0 at ahci0 bus 0 target 0 lun 0
|
|
da0: <SATA HITACHI HTS72201 DCDZ> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number 071103DP1D10DGG5YHJP
|
|
da0: 150.000MB/s transfers
|
|
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
cd8 at umass-sim0 bus 0 target 0 lun 0
|
|
cd8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
cd8: 1.000MB/s transfers
|
|
cd8: cd present [284219 x 2048 byte records]
|
|
da0: type 0x27, start 2048, end = 13860863, size 13858816 : OK
|
|
da0: type 0x7, start 13865040, end = 312575759, size 298710720 : OK
|
|
intr 3 at 0/20000 hz, livelock removed
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
Mounting root from cd9660:cd0
|
|
tryroot cd0
|
|
no disk named 'cd0'
|
|
setrootbyname failed
|
|
iso_mountroot: can't find rootvp
|
|
Root mount failed: 6
|
|
Mounting root from cd9660:acd0
|
|
tryroot acd0
|
|
no disk named 'acd0'
|
|
setrootbyname failed
|
|
iso_mountroot: can't find rootvp
|
|
Root mount failed: 6
|
|
Mounting root from cd9660:cd1
|
|
tryroot cd1
|
|
no disk named 'cd1'
|
|
setrootbyname failed
|
|
iso_mountroot: can't find rootvp
|
|
Root mount failed: 6
|
|
Mounting root from cd9660:acd1
|
|
tryroot acd1
|
|
no disk named 'acd1'
|
|
setrootbyname failed
|
|
iso_mountroot: can't find rootvp
|
|
Root mount failed: 6
|
|
Mounting root from cd9660:cd8
|
|
tryroot cd8
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
iso_mountroot(): using session at block 0
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
mountmsdosfs(): bad FAT32 filesystem
|
|
umass1.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
|
|
umass1: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub2
|
|
umass1:6:1:-1: Attached to scbus6
|
|
umass1: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub2
|
|
sg9 at umass-sim1 bus 1 target 0 lun 0
|
|
sg9: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
sg9: 1.000MB/s transfers
|
|
pass9 at umass-sim1 bus 1 target 0 lun 0
|
|
pass9: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
pass9: 1.000MB/s transfers
|
|
da8 at umass-sim1 bus 1 target 0 lun 0
|
|
da8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
da8: 1.000MB/s transfers
|
|
da8: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
|
|
da8: type 0xc, start 63, end = 31455647, size 31455585 : OK
|
|
pci0: driver added
|
|
found-> vendor=0x8086, dev=0x283a, revid=0x03
|
|
domain=0, bus=0, slot=26, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
pci0:0:26:7: reprobing on driver added
|
|
ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ehci0: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe226c00-0xfe226fff irq 11 at device 26.7 on pci0
|
|
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe226c00
|
|
usb5: EHCI version 1.0
|
|
usb5: companion controllers, 2 ports each: usb0 usb1
|
|
usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
usb5: <EHCI (generic) USB 2.0 controller> [tentative] on ehci0
|
|
usb5: USB revision 2.0
|
|
ugen0: at uhub0 port 2 (addr 2) disconnected
|
|
devfs: Please check that only the right ugen devices were removed !!!
|
|
ugen0: detached
|
|
uhub5: at uhub1 port 2 (addr 2) disconnected
|
|
(cd8:umass-sim0:0:0:0): lost device
|
|
(cd8:umass-sim0:0:0:0): removing device entry
|
|
(sg8:umass-sim0:0:0:0): lost device
|
|
(sg8:umass-sim0:0:0:0): removing device entry
|
|
(pass8:umass-sim0:0:0:0): lost device
|
|
(pass8:umass-sim0:0:0:0): removing device entry
|
|
uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb5
|
|
uhub7: 4 ports with 4 removable, self powered
|
|
umass0: detached
|
|
ukbd0: detached
|
|
ums0: detached
|
|
uhub6: detached
|
|
uhub5: detached
|
|
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb5
|
|
usb5: <EHCI (generic) USB 2.0 controller> [attached!] on ehci0
|
|
ehci0: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe226c00-0xfe226fff irq 11 at device 26.7 on pci0
|
|
found-> vendor=0x8086, dev=0x284b, revid=0x03
|
|
domain=0, bus=0, slot=27, func=0
|
|
class=04-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0091
|
|
pci0:0:27:0: reprobing on driver added
|
|
found-> vendor=0x8086, dev=0x2836, revid=0x03
|
|
domain=0, bus=0, slot=29, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
pci0:0:29:7: reprobing on driver added
|
|
ehci1.pci0.pcib0.legacy0.nexus0.root0
|
|
ehci1: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xfe227000-0xfe2273ff irq 11 at device 29.7 on pci0
|
|
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe227000
|
|
usb6: EHCI version 1.0
|
|
usb6: companion controllers, 2 ports each: usb2 usb3 usb4
|
|
usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
|
|
usb6: <EHCI (generic) USB 2.0 controller> [tentative] on ehci1
|
|
usb6: USB revision 2.0
|
|
umass1: at uhub2 port 1 (addr 2) disconnected
|
|
(pass9:umass-sim1:1:0:0): lost device
|
|
(pass9:umass-sim1:1:0:0): removing device entry
|
|
(sg9:umass-sim1:1:0:0): lost device
|
|
(sg9:umass-sim1:1:0:0): removing device entry
|
|
(da8:umass-sim1:1:0:0): lost device
|
|
(da8:umass-sim1:1:0:0): removing device entry
|
|
uhub5.usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub5: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb6
|
|
uhub5: 6 ports with 6 removable, self powered
|
|
umass1: detached
|
|
uhub5: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb6
|
|
usb6: <EHCI (generic) USB 2.0 controller> [attached!] on ehci1
|
|
ehci1: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xfe227000-0xfe2273ff irq 11 at device 29.7 on pci0
|
|
found-> vendor=0x8086, dev=0x283e, revid=0x03
|
|
domain=0, bus=0, slot=31, func=3
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
pci0:0:31:3: reprobing on driver added
|
|
pci1: driver added
|
|
pci2: driver added
|
|
found-> vendor=0x8086, dev=0x444e, revid=0x01
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=05-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0211[LEGDEV]
|
|
pci0:2:0:0: reprobing on driver added
|
|
pci3: driver added
|
|
found-> vendor=0x8086, dev=0x4230, revid=0x61
|
|
domain=0, bus=3, slot=0, func=0
|
|
class=02-80-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0106, statreg=0x4010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=3
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0001[DEVICE]
|
|
pci0:3:0:0: reprobing on driver added
|
|
pci4: driver added
|
|
pci5: driver added
|
|
pci13: driver added
|
|
pci21: driver added
|
|
found-> vendor=0x1180, dev=0x0822, revid=0x21
|
|
domain=0, bus=21, slot=0, func=2
|
|
class=08-05-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
pci0:21:0:2: reprobing on driver added
|
|
found-> vendor=0x1180, dev=0x0843, revid=0x11
|
|
domain=0, bus=21, slot=0, func=3
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
pci0:21:0:3: reprobing on driver added
|
|
found-> vendor=0x1180, dev=0x0592, revid=0x11
|
|
domain=0, bus=21, slot=0, func=4
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
pci0:21:0:4: reprobing on driver added
|
|
found-> vendor=0x1180, dev=0x0852, revid=0x11
|
|
domain=0, bus=21, slot=0, func=5
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
pci0:21:0:5: reprobing on driver added
|
|
umass0.uhub5.usb6.ehci1.pci0.pcib0.legacy0.nexus0.root0
|
|
umass0: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub5
|
|
umass0:7:0:-1: Attached to scbus7
|
|
umass0: <3System USB FlashDisk, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub5
|
|
uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub6: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [tentative] on uhub7
|
|
uhub6: multiple transaction translators
|
|
uhub6: 7 ports with 7 removable, self powered
|
|
ugen0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [tentative] on uhub0
|
|
ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2> [attached!] on uhub0
|
|
uhub6: <vendor 0x04b3 product 0x4486, class 9/0, rev 2.00/0.01, addr 2> [attached!] on uhub7
|
|
sg8 at umass-sim0 bus 0 target 0 lun 0
|
|
sg8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
sg8: 40.000MB/s transfers
|
|
pass8 at umass-sim0 bus 0 target 0 lun 0
|
|
pass8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
pass8: 40.000MB/s transfers
|
|
da8 at umass-sim0 bus 0 target 0 lun 0
|
|
da8: <3System USB FlashDisk 1.00> Removable Direct Access SCSI-2 device
|
|
da8: 40.000MB/s transfers
|
|
da8: 15360MB (31457280 512 byte sectors: 255H 63S/T 1958C)
|
|
da8: type 0xc, start 63, end = 31455647, size 31455585 : OK
|
|
umass1.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
umass1: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [tentative] on uhub6
|
|
umass1:8:1:-1: Attached to scbus8
|
|
umass1: <IBM CY4611B V2.50RC16, class 0/0, rev 2.00/0.07, addr 3> [attached!] on uhub6
|
|
sg9 at umass-sim1 bus 1 target 0 lun 0
|
|
sg9: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
sg9: 40.000MB/s transfers
|
|
pass9 at umass-sim1 bus 1 target 0 lun 0
|
|
pass9: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
pass9: 40.000MB/s transfers
|
|
cd8 at umass-sim1 bus 1 target 0 lun 0
|
|
cd8: <Optiarc DVD RW AD-7910A 1.D0> Removable CD-ROM SCSI-0 device
|
|
cd8: 40.000MB/s transfers
|
|
cd8: cd present [284219 x 2048 byte records]
|
|
uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [tentative] on uhub6
|
|
uhub8: single transaction translator
|
|
uhub8: 4 ports with 4 removable, self powered
|
|
uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/9.01, addr 4> [attached!] on uhub6
|
|
ukbd0.uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub8
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x350000
|
|
ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub8
|
|
ums0.uhub8.uhub6.uhub7.usb5.ehci0.pci0.pcib0.legacy0.nexus0.root0
|
|
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [tentative] on uhub8
|
|
ums0: 5 buttons and Z dir.
|
|
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> [attached!] on uhub8
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
cd8: invalid primary partition table: no magic
|
|
|