|
Copyright (c) 2003-2010 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly v2.8.2-RELEASE #2: Fri Oct 29 08:03:52 PDT 2010
|
|
root@test29.backplane.com:/usr/obj/usr/src-misc/sys/X86_64_GENERIC_SMP
|
|
TSC clock: 1662938730 Hz, i8254 clock: 1193366 Hz
|
|
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1662.70-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
|
|
AMD Features=0x20100800<SYSCALL,NX,LM>
|
|
AMD Features2=0x1<LAHF>
|
|
Cores per package: 2
|
|
Logical CPUs per core: 2
|
|
real memory = 534969344 (510 MB)
|
|
avail memory = 488312832 (465 MB)
|
|
Changing APIC ID for IO APIC #0 from 1 to 4 in MP table
|
|
Changing APIC ID for IO APIC #0 from 1 to 4 on chip
|
|
Programming 24 pins in IOAPIC #0
|
|
lapic: divisor index 0, frequency 83134451 Hz
|
|
DragonFly/MP: Multiprocessor motherboard
|
|
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
|
|
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
|
|
cpu2 (AP): apic id: 2, version: 0x00050014, at 0xfee00000
|
|
cpu3 (AP): apic id: 3, version: 0x00050014, at 0xfee00000
|
|
io0 (APIC): apic id: 4, version: 0x00170020, at 0xfec00000
|
|
APIC_IO: Testing 8254 interrupt delivery
|
|
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
|
|
SMP: AP CPU #1 Launched!
|
|
SMP: AP CPU #2 Launched!
|
|
SMP: AP CPU #3 Launched!
|
|
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->64
|
|
module_register: module pci/ahci already exists!
|
|
Module pci/ahci failed to register: 17
|
|
FQ scheduler policy version 1.0 loaded
|
|
No policy for md0 specified, or policy not found
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
kbd0 at kbdmux0
|
|
ACPI: RSDP 0xf99f0 00024 (v2 ACPIAM)
|
|
ACPI: XSDT 0x1fe90100 0004C (v1 082510 XSDT0909 20100825 MSFT 00000097)
|
|
ACPI: FACP 0x1fe90290 000F4 (v4 082510 FACP0909 20100825 MSFT 00000097)
|
|
ACPI: DSDT 0x1fe90440 04F38 (v2 A140PA A140PA22 00000022 INTL 20051117)
|
|
ACPI: FACS 0x1fe9e000 00040
|
|
ACPI: APIC 0x1fe90390 0006C (v2 082510 APIC0909 20100825 MSFT 00000097)
|
|
ACPI: MCFG 0x1fe90400 0003C (v1 082510 OEMMCFG 20100825 MSFT 00000097)
|
|
ACPI: OEMB 0x1fe9e040 00082 (v1 082510 OEMB0909 20100825 MSFT 00000097)
|
|
ACPI: HPET 0x1fe9a440 00038 (v1 082510 OEMHPET 20100825 MSFT 00000097)
|
|
cryptosoft0: <software crypto> on motherboard
|
|
acpi0: <082510 XSDT0909> on motherboard
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: frequency 14318180
|
|
acpi_button0: <Power Button> on acpi0
|
|
cpu0: <ACPI CPU> on acpi0
|
|
cpu_cst0: <ACPI CPU C-State> on cpu0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
cpu_cst1: <ACPI CPU C-State> on cpu1
|
|
cpu2: <ACPI CPU> on acpi0
|
|
cpu_cst2: <ACPI CPU C-State> on cpu2
|
|
cpu3: <ACPI CPU> on acpi0
|
|
cpu_cst3: <ACPI CPU C-State> on cpu3
|
|
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
|
|
pci0: <PCI bus> on pcib0
|
|
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 5
|
|
pcib1: <MPTable PCI-PCI bridge> irq 5 at device 28.0 on pci0
|
|
pci1: <PCI bus> on pcib1
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbffc000-0xfbffffff,0xfbffb000-0xfbffbfff irq 5 at device 0.0 on pci1
|
|
re0: Hardware rev. 0x28000000; MAC ver. 0x2a; PCI-E 125MHz
|
|
miibus0: <MII bus> on re0
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
|
|
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
re0: MAC address: 00:01:2e:bc:70:32
|
|
pcib2: <MPTable PCI-PCI bridge> irq 10 at device 28.1 on pci0
|
|
pci2: <PCI bus> on pcib2
|
|
pci2: <network> (vendor 0x168c, dev 0x002b) at device 0.0 irq 10
|
|
pcib3: <MPTable PCI-PCI bridge> irq 11 at device 28.2 on pci0
|
|
pci3: <PCI bus> on pcib3
|
|
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xce000000-0xcfffffff,0xd0000000-0xdfffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci3
|
|
pci3: <multimedia, HDA> (vendor 0x10de, dev 0x0be3) at device 0.1 irq 11
|
|
uhci0: <Intel 82801G (ICH7) USB controller> port 0xcc00-0xcc1f irq 14 at device 29.0 on pci0
|
|
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhci1: <Intel 82801G (ICH7) USB controller> port 0xc880-0xc89f irq 2 at device 29.1 on pci0
|
|
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhci2: <Intel 82801G (ICH7) USB controller> port 0xc800-0xc81f irq 11 at device 29.2 on pci0
|
|
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhci3: <Intel 82801G (ICH7) USB controller> port 0xc480-0xc49f irq 5 at device 29.3 on pci0
|
|
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xfe9fbc00-0xfe9fbfff irq 14 at device 29.7 on pci0
|
|
usb4: EHCI version 1.0
|
|
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
|
|
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
|
|
usb4: USB revision 2.0
|
|
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
|
|
uhub4: 8 ports with 8 removable, self powered
|
|
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.63, addr 2> on uhub4
|
|
uhub5: single transaction translator
|
|
uhub5: 4 ports with 4 removable, self powered
|
|
ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 2> on uhub1
|
|
kbd1 at ukbd0
|
|
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/2.20, addr 2> on uhub1
|
|
umass0: <Western Digital My Book, class 0/0, rev 2.00/1.65, addr 3> on uhub5
|
|
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
|
|
pci4: <PCI bus> on pcib4
|
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
atapci0: <Intel ICH7 SATA300 controller> port 0xbc00-0xbc0f,0xc000-0xc003,0xc080-0xc087,0xc400-0xc403,0xb880-0xb887 mem 0xfe9fb800-0xfe9fbbff irq 2 at device 31.2 on pci0
|
|
ata2: <ATA channel 0> on atapci0
|
|
No policy for ad4 specified, or policy not found
|
|
disk scheduler: set policy of ad4 to noop
|
|
ad4: 238475MB <Hitachi HTS545025B9SA02 PB2AC60W> at ata2-master SATA150
|
|
ata3: <ATA channel 1> on atapci0
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 2
|
|
pmtimer0 on isa0
|
|
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
|
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0: <System console> at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sio0: can't drain, serial port might not exist, disabling
|
|
sio1: can't drain, serial port might not exist, disabling
|
|
ppc0: cannot reserve I/O port range
|
|
CAM: Configuring 3 busses
|
|
(probe8:umass-sim0:0:0:0): Uninitialized Transport 5:0?
|
|
CAM: finished configuring all busses
|
|
No policy for da8 specified, or policy not found
|
|
disk scheduler: set policy of da8 to noop
|
|
no B_DEVMAGIC (bootdev=0)
|
|
da8 at umass-sim0 bus 0 target 0 lun 0
|
|
da8: <WD 10EAVS External 1.65> Fixed Direct Access SCSI-4 device
|
|
da8: Serial Number WD-WCAU40147705
|
|
da8: 40.000MB/s transfers
|
|
da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
|
|
Mounting root from hammer:serno/100508PBL2003SK0LDHX_.s3d
|
|
tryroot serno/100508PBL2003SK0LDHX_.s3d
|
|
HAMMER(ROOT) recovery check seqno=0036b162
|
|
HAMMER(ROOT) recovery range 30000000009aab30-30000000009c5190
|
|
HAMMER(ROOT) recovery nexto 30000000009b98a0 endseqno=0036b288
|
|
HAMMER(ROOT) recovery undo 30000000009aab30-30000000009c5190 (108128 bytes)(RW)
|
|
HAMMER(ROOT) Found REDO_SYNC 30000000009b98a0
|
|
HAMMER(ROOT) Ignoring extra REDO_SYNC records in UNDO/REDO FIFO.
|
|
HAMMER(ROOT) recovery complete
|
|
HAMMER(ROOT) recovery redo 30000000009aab30-30000000009c5190 (108128 bytes)(RW)
|
|
HAMMER(ROOT) Embedded extended redo 30000000009b98a0, -60784 extbytes
|
|
HAMMER(ROOT) End redo recovery
|
|
Mounting devfs
|
|
HAMMER(Backup) recovery check seqno=001dffff
|
|
HAMMER(Backup) recovery range 3000000000000000-3000000000000000
|
|
HAMMER(Backup) recovery nexto 3000000000000000 endseqno=001e0000
|
|
HAMMER(Backup) mounted clean, no recovery needed
|
|
unmount(/usr): Cannot unmount: 26 process references still present
|
|
unmount(/tmp): Cannot unmount: 2 process references still present
|
|
unmount(/var): Cannot unmount: 39 process references still present
|
|
da8s4: cannot find label (no disk label)
|
|
HAMMER(Backup) recovery check seqno=001dffff
|
|
HAMMER(Backup) recovery range 3000000000000000-3000000000000000
|
|
HAMMER(Backup) recovery nexto 3000000000000000 endseqno=001e0000
|
|
HAMMER(Backup) mounted clean, no recovery needed
|