|
Copyright (c) 2003-2011 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
Slab ZoneSize set to 128KB
|
|
Leaving critical section, allowing interrupts
|
|
ACPI SDT: RSDP not in EBDA
|
|
ACPI SDT: RSDP in BIOS mem
|
|
ACPI FADT: SCI irq 9, conform/conform
|
|
MPTABLE: warning duplicated PCI int entry for bus 0, dev 28, pin 0
|
|
DragonFly v2.11.0.673.g0d557-DEVELOPMENT #0: Mon Aug 15 16:08:58 UTC 2011
|
|
root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
|
|
Calibrating clock(s) ... TSC clock: 2400004581 Hz, i8254 clock: 1193142 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2400.09-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
|
|
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
|
|
AMD Features2=0x1<LAHF>
|
|
real memory = 12874212352 (12277 MB)
|
|
Physical memory chunk(s):
|
|
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
|
|
0x01e60000 - 0xdf61ffff, 3715891200 bytes (907200 pages)
|
|
0x100000000 - 0x31ffbffff, 9126543360 bytes (2228160 pages)
|
|
avail memory = 12148203520 (11585 MB)
|
|
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
|
|
ACPI MADT: BSP apic id 0
|
|
ACPI MADT: cpu id 0, apic id 0
|
|
ACPI MADT: cpu id 8, apic id 16
|
|
ACPI MADT: cpu id 4, apic id 4
|
|
ACPI MADT: cpu id 12, apic id 20
|
|
ACPI MADT: cpu id 2, apic id 2
|
|
ACPI MADT: cpu id 10, apic id 18
|
|
ACPI MADT: cpu id 6, apic id 6
|
|
ACPI MADT: cpu id 14, apic id 22
|
|
ACPI MADT: cpu id 1, apic id 1
|
|
ACPI MADT: cpu id 9, apic id 17
|
|
ACPI MADT: cpu id 5, apic id 5
|
|
ACPI MADT: cpu id 13, apic id 21
|
|
ACPI MADT: cpu id 3, apic id 3
|
|
ACPI MADT: cpu id 11, apic id 19
|
|
ACPI MADT: cpu id 7, apic id 7
|
|
ACPI MADT: cpu id 15, apic id 23
|
|
lapic: divisor index 0, frequency 66669291 Hz
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: Waiting APs LAPIC initialization
|
|
SMP: CPU8 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU2 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU10 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU5 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU13 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU12 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU4 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU9 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU6 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU14 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU7 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU3 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU15 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU11 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
ACPI MADT: warning invalid intsrc irq 9 trig, level
|
|
ACPI MADT: IOAPIC addr 0xfec00000, apic id 8, gsi base 0
|
|
ACPI MADT: IOAPIC addr 0xfec80000, apic id 0, gsi base 24
|
|
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
|
|
IOAPIC: idx 0, apic id 8, gsi base 0, npin 24
|
|
IOAPIC: idx 1, apic id 9, gsi base 24, npin 24
|
|
IOAPIC: irq 1 -> gsi 1 edge/high
|
|
IOAPIC: irq 0 -> gsi 2 edge/high
|
|
IOAPIC: irq 3 -> gsi 3 edge/high
|
|
IOAPIC: irq 4 -> gsi 4 edge/high
|
|
IOAPIC: irq 5 -> gsi 5 edge/high
|
|
IOAPIC: irq 6 -> gsi 6 edge/high
|
|
IOAPIC: irq 7 -> gsi 7 edge/high
|
|
IOAPIC: irq 8 -> gsi 8 edge/high
|
|
IOAPIC: irq 9 -> gsi 9 edge/high
|
|
IOAPIC: irq 10 -> gsi 10 edge/high
|
|
IOAPIC: irq 11 -> gsi 11 edge/high
|
|
IOAPIC: irq 12 -> gsi 12 edge/high
|
|
IOAPIC: irq 13 -> gsi 13 edge/high
|
|
IOAPIC: irq 14 -> gsi 14 edge/high
|
|
IOAPIC: irq 15 -> gsi 15 edge/high
|
|
IOAPIC: irq 16 -> gsi 16 level/low
|
|
IOAPIC: irq 17 -> gsi 17 level/low
|
|
IOAPIC: irq 18 -> gsi 18 level/low
|
|
IOAPIC: irq 19 -> gsi 19 level/low
|
|
IOAPIC: irq 20 -> gsi 20 level/low
|
|
IOAPIC: irq 21 -> gsi 21 level/low
|
|
IOAPIC: irq 22 -> gsi 22 level/low
|
|
IOAPIC: irq 23 -> gsi 23 level/low
|
|
IOAPIC: irq 24 -> gsi 24 level/low
|
|
IOAPIC: irq 25 -> gsi 25 level/low
|
|
IOAPIC: irq 26 -> gsi 26 level/low
|
|
IOAPIC: irq 27 -> gsi 27 level/low
|
|
IOAPIC: irq 28 -> gsi 28 level/low
|
|
IOAPIC: irq 29 -> gsi 29 level/low
|
|
IOAPIC: irq 30 -> gsi 30 level/low
|
|
IOAPIC: irq 31 -> gsi 31 level/low
|
|
IOAPIC: irq 32 -> gsi 32 level/low
|
|
IOAPIC: irq 33 -> gsi 33 level/low
|
|
IOAPIC: irq 34 -> gsi 34 level/low
|
|
IOAPIC: irq 35 -> gsi 35 level/low
|
|
IOAPIC: irq 36 -> gsi 36 level/low
|
|
IOAPIC: irq 37 -> gsi 37 level/low
|
|
IOAPIC: irq 38 -> gsi 38 level/low
|
|
IOAPIC: irq 39 -> gsi 39 level/low
|
|
IOAPIC: irq 40 -> gsi 40 level/low
|
|
IOAPIC: irq 41 -> gsi 41 level/low
|
|
IOAPIC: irq 42 -> gsi 42 level/low
|
|
IOAPIC: irq 43 -> gsi 43 level/low
|
|
IOAPIC: irq 44 -> gsi 44 level/low
|
|
IOAPIC: irq 45 -> gsi 45 level/low
|
|
IOAPIC: irq 46 -> gsi 46 level/low
|
|
IOAPIC: irq 47 -> gsi 47 level/low
|
|
IOAPIC: irq 2 reserved
|
|
ELCR Found. ISA IRQs programmed as:
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
E E E E E L E L E E L E E E E E
|
|
MPTABLE: 0:0 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:1 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:3 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:4 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:5 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:6 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:7 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:8 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:9 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:10 INTA -> IOAPIC 1.16
|
|
MPTABLE: 0:28 INTA -> IOAPIC 1.16
|
|
MPTABLE: 2:0 INTA -> IOAPIC 1.16
|
|
MPTABLE: 2:0 INTB -> IOAPIC 1.17
|
|
MPTABLE: 3:0 INTA -> IOAPIC 1.18
|
|
MPTABLE: 3:0 INTB -> IOAPIC 1.19
|
|
MPTABLE: 4:0 INTA -> IOAPIC 0.4
|
|
MPTABLE: 4:0 INTB -> IOAPIC 0.16
|
|
MPTABLE: 6:0 INTA -> IOAPIC 0.9
|
|
MPTABLE: 6:0 INTB -> IOAPIC 0.7
|
|
MPTABLE: 6:0 INTC -> IOAPIC 0.22
|
|
MPTABLE: 6:0 INTD -> IOAPIC 0.21
|
|
MPTABLE: 7:0 INTA -> IOAPIC 0.8
|
|
MPTABLE: 7:0 INTB -> IOAPIC 0.18
|
|
MPTABLE: 7:0 INTC -> IOAPIC 0.23
|
|
MPTABLE: 7:0 INTD -> IOAPIC 0.17
|
|
MPTABLE: 10:0 INTA -> IOAPIC 0.7
|
|
MPTABLE: 10:0 INTB -> IOAPIC 0.15
|
|
MPTABLE: 10:0 INTC -> IOAPIC 0.14
|
|
MPTABLE: 10:0 INTD -> IOAPIC 0.13
|
|
MPTABLE: 13:0 INTA -> IOAPIC 0.6
|
|
MPTABLE: 13:0 INTB -> IOAPIC 0.13
|
|
MPTABLE: 13:0 INTC -> IOAPIC 0.15
|
|
MPTABLE: 13:0 INTD -> IOAPIC 0.14
|
|
MPTABLE: 16:0 INTA -> IOAPIC 0.0
|
|
MPTABLE: 16:0 INTB -> IOAPIC 0.10
|
|
MPTABLE: 16:0 INTC -> IOAPIC 0.11
|
|
MPTABLE: 16:0 INTD -> IOAPIC 0.12
|
|
MPTABLE: 19:0 INTA -> IOAPIC 0.1
|
|
MPTABLE: 19:0 INTB -> IOAPIC 0.11
|
|
MPTABLE: 19:0 INTC -> IOAPIC 0.12
|
|
MPTABLE: 19:0 INTD -> IOAPIC 0.10
|
|
MPTABLE: 20:0 INTA -> IOAPIC 0.2
|
|
MPTABLE: 20:0 INTB -> IOAPIC 0.1
|
|
MPTABLE: 20:0 INTC -> IOAPIC 0.3
|
|
MPTABLE: 20:0 INTD -> IOAPIC 0.5
|
|
MPTABLE: 23:0 INTA -> IOAPIC 0.3
|
|
MPTABLE: 23:0 INTB -> IOAPIC 0.14
|
|
MPTABLE: 23:0 INTC -> IOAPIC 0.13
|
|
MPTABLE: 23:0 INTD -> IOAPIC 0.15
|
|
MPTABLE: 1:4 INTA -> IOAPIC 1.21
|
|
MPTABLE: 1:4 INTB -> IOAPIC 1.22
|
|
MPTABLE: 0:31 INTB -> IOAPIC 1.17
|
|
MPTABLE: 1:3 INTA -> IOAPIC 1.23
|
|
MPTABLE: 0:29 INTA -> IOAPIC 1.20
|
|
MPTABLE: 0:29 INTB -> IOAPIC 1.23
|
|
MPTABLE: 0:29 INTC -> IOAPIC 1.22
|
|
MPTABLE: 0:29 INTD -> IOAPIC 1.23
|
|
Finish MP startup
|
|
Active CPU Mask: 000000000000ffff
|
|
ndepotmags=438 x mag_cap=128 for mbuf
|
|
ndepotmags=219 x mag_cap=128 for mbuf pkt hdr
|
|
ndepotmags=34 x mag_cap=98 for cluster mbuf
|
|
ndepotmags=34 x mag_cap=98 for jcluster mbuf
|
|
ndepotmags=34 x mag_cap=98 for mbuf + cluster
|
|
ndepotmags=33 x mag_cap=13 for mbuf pkt hdr + cluster
|
|
ndepotmags=34 x mag_cap=98 for mbuf + jcluster
|
|
ndepotmags=33 x mag_cap=13 for mbuf pkt hdr + jcluster
|
|
ndepotmags=33 x mag_cap=4 for CCMS
|
|
ndepotmags=33 x mag_cap=4 for sf_buf
|
|
ndepotmags=3 x mag_cap=4 for exec-args
|
|
Preloaded elf kernel "kernel" at 0xffffffff8181a000.
|
|
Preloaded elf obj module "acpi.ko" at 0xffffffff8181a2f0.
|
|
Preloaded elf obj module "ahci.ko" at 0xffffffff8181ac88.
|
|
Preloaded elf obj module "ehci.ko" at 0xffffffff8181b520.
|
|
module_register: module pci/ahci already exists!
|
|
Module pci/ahci failed to register: 17
|
|
start scheduler helpers on cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
start dummy scheduler helpers on cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
ndepotmags=9 x mag_cap=4 for thread
|
|
ndepotmags=33 x mag_cap=4 for dsched-tdio-cache
|
|
ndepotmags=33 x mag_cap=4 for dsched-tdctx-cache
|
|
ndepotmags=33 x mag_cap=4 for dsched-diskctx-cache
|
|
ndepotmags=9 x mag_cap=4 for vmspace
|
|
ndepotmags=33 x mag_cap=4 for disk-msg-cache
|
|
ndepotmags=33 x mag_cap=4 for devfs-node-cache
|
|
ndepotmags=33 x mag_cap=4 for devfs-msg-cache
|
|
ndepotmags=33 x mag_cap=4 for devfs-dev-cache
|
|
FQ scheduler policy version 1.0 loaded
|
|
ndepotmags=33 x mag_cap=4 for pdict32
|
|
ndepotmags=33 x mag_cap=4 for proparay
|
|
ndepotmags=33 x mag_cap=4 for pdict16
|
|
ndepotmags=33 x mag_cap=4 for propnmbr
|
|
ndepotmags=33 x mag_cap=4 for propdict
|
|
ndepotmags=33 x mag_cap=4 for propstng
|
|
ndepotmags=33 x mag_cap=4 for pdict128
|
|
ndepotmags=33 x mag_cap=4 for propdata
|
|
ndepotmags=9 x mag_cap=4 for devfs
|
|
ndepotmags=33 x mag_cap=4 for devfs-rule-cache
|
|
wlan: <802.11 Link Layer>
|
|
ndepotmags=33 x mag_cap=4 for ata_request
|
|
ndepotmags=33 x mag_cap=4 for ata_composite
|
|
No policy for md0 specified, or policy not found
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
kbd: new array size 4
|
|
kbd1 at kbdmux0
|
|
ndepotmags=33 x mag_cap=4 for crypto op
|
|
ndepotmags=33 x mag_cap=4 for crypto desc
|
|
crypto: <crypto core>
|
|
md0: invalid primary partition table: no magic
|
|
ACPI: RSDP 0xf4f00 00024 (v2 HP )
|
|
ACPI: XSDT 0xdf630340 000B4 (v1 HP ProLiant 00000002 ?? 0000162E)
|
|
ACPI: FACP 0xdf630440 000F4 (v3 HP ProLiant 00000002 ?? 0000162E)
|
|
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110211/tbfadt-710)
|
|
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110211/tbfadt-710)
|
|
ACPI: DSDT 0xdf630540 0200D (v1 HP DSDT 00000001 INTL 20030228)
|
|
ACPI: FACS 0xdf62f100 00040
|
|
ACPI: SPCR 0xdf62f140 00050 (v1 HP SPCRRBSU 00000001 ?? 0000162E)
|
|
ACPI: MCFG 0xdf62f1c0 0003C (v1 HP ProLiant 00000001 00000000)
|
|
ACPI: HPET 0xdf62f200 00038 (v1 HP ProLiant 00000002 ?? 0000162E)
|
|
ACPI: FFFF 0xdf62f240 00064 (v2 HP ProLiant 00000002 ?? 0000162E)
|
|
ACPI: SPMI 0xdf62f2c0 00040 (v5 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: ERST 0xdf62f300 001D0 (v1 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: APIC 0xdf62f500 0015E (v1 HP ProLiant 00000002 00000000)
|
|
ACPI: SRAT 0xdf62f680 00570 (v1 HP Proliant 00000001 ?? 0000162E)
|
|
ACPI: FFFF 0xdf62fc00 00176 (v1 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: BERT 0xdf62fd80 00030 (v1 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: HEST 0xdf62fdc0 000BC (v1 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: DMAR 0xdf62fe80 00154 (v1 HP ProLiant 00000001 ?? 0000162E)
|
|
ACPI: SSDT 0xdf632580 00125 (v3 HP CRSPCI0 00000002 HP 00000001)
|
|
ACPI: SSDT 0xdf6326c0 00255 (v3 HP riser1a 00000002 INTL 20061109)
|
|
ACPI: SSDT 0xdf632940 003BB (v1 HP pcc 00000001 INTL 20090625)
|
|
ACPI: SSDT 0xdf632d00 00377 (v1 HP pmab 00000001 INTL 20090625)
|
|
ACPI: SSDT 0xdf633080 022E4 (v1 INTEL PPM RCM 00000001 INTL 20061109)
|
|
cryptosoft0.nexus0.root0
|
|
cryptosoft0: <software crypto> [tentative] on motherboard
|
|
crypto: assign cryptosoft0 driver id 0, flags 234881024
|
|
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
|
|
cryptosoft0: <software crypto> [attached!] on motherboard
|
|
acpi0.nexus0.root0
|
|
acpi0: <HP ProLiant> [tentative] on motherboard
|
|
ndepotmags=33 x mag_cap=4 for Acpi-Namespace
|
|
ndepotmags=33 x mag_cap=4 for Acpi-State
|
|
ndepotmags=33 x mag_cap=4 for Acpi-Parse
|
|
ndepotmags=33 x mag_cap=4 for Acpi-ParseExt
|
|
ndepotmags=33 x mag_cap=4 for Acpi-Operand
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI testing level/low
|
|
IOAPIC: irq 9, gsi 9 edge/high -> level/low
|
|
sched_ithd: stray interrupt 9 on cpu 0
|
|
ACPI FADT: SCI testing level/high
|
|
IOAPIC: irq 9, gsi 9 level/low -> level/high
|
|
ACPI FADT: SCI select level/high
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
|
|
pci_open(1a): mode1res=0x80000000 (0x80000000)
|
|
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=34068086)
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks BAD min = 4, max = 7, width = 3
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
ACPI timer looks GOOD min = 4, max = 5, width = 1
|
|
ACPI timer looks BAD min = 4, max = 8, width = 4
|
|
ACPI timer looks GOOD min = 4, max = 4, width = 0
|
|
ACPI timer looks GOOD min = 4, max = 6, width = 2
|
|
ACPI timer looks BAD min = 4, max = 8, width = 4
|
|
ACPI timer looks BAD min = 4, max = 8, width = 4
|
|
ACPI timer looks GOOD min = 4, max = 4, width = 0
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x908-0x90b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x908-0x90b on acpi0
|
|
acpi_hpet0.acpi0.nexus0.root0
|
|
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: vend: 0x8086, rev: 0x1, num: 3, opts: legacy_route 64-bit
|
|
acpi_hpet0: frequency 14318180
|
|
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
|
|
pci_link0: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 5 7 10 11
|
|
Validation 0 7 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link1: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 5 N 0 5 7 10 11
|
|
Validation 0 5 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link2: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 5 7 10 11
|
|
Validation 0 10 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link3: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 5 7 10 11
|
|
Validation 0 10 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link4: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 5 N 0 5 7 10 11
|
|
Validation 0 5 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link5: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 5 7 10 11
|
|
Validation 0 10 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link6: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 5 7 10 11
|
|
Validation 0 10 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pci_link7: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 7 N 0 5 7 10 11
|
|
Validation 0 7 N 0 5 7 10 11
|
|
After Disable 0 255 N 0 5 7 10 11
|
|
pcib0.acpi0.nexus0.root0
|
|
pcib0: <ACPI Host-PCI bridge> [tentative] on acpi0
|
|
pci0.pcib0.acpi0.nexus0.root0
|
|
pci0: <ACPI PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x3406, revid=0x13
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0140, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x3408, revid=0x13
|
|
domain=0, bus=0, slot=1, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x3409, revid=0x13
|
|
domain=0, bus=0, slot=2, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340a, revid=0x13
|
|
domain=0, bus=0, slot=3, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340b, revid=0x13
|
|
domain=0, bus=0, slot=4, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340c, revid=0x13
|
|
domain=0, bus=0, slot=5, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340d, revid=0x13
|
|
domain=0, bus=0, slot=6, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340e, revid=0x13
|
|
domain=0, bus=0, slot=7, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x340f, revid=0x13
|
|
domain=0, bus=0, slot=8, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x3410, revid=0x13
|
|
domain=0, bus=0, slot=9, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x3411, revid=0x13
|
|
domain=0, bus=0, slot=10, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0547, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 2 messages, vector masks
|
|
PCI Express ver.2 cap=0x0042
|
|
found-> vendor=0x8086, dev=0x343a, revid=0x13
|
|
domain=0, bus=0, slot=13, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x343b, revid=0x13
|
|
domain=0, bus=0, slot=13, func=1
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x343c, revid=0x13
|
|
domain=0, bus=0, slot=13, func=2
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x343d, revid=0x13
|
|
domain=0, bus=0, slot=13, func=3
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3418, revid=0x13
|
|
domain=0, bus=0, slot=13, func=4
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3419, revid=0x13
|
|
domain=0, bus=0, slot=13, func=5
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x341a, revid=0x13
|
|
domain=0, bus=0, slot=13, func=6
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x341c, revid=0x13
|
|
domain=0, bus=0, slot=14, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x341d, revid=0x13
|
|
domain=0, bus=0, slot=14, func=1
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x341e, revid=0x13
|
|
domain=0, bus=0, slot=14, func=2
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x341f, revid=0x13
|
|
domain=0, bus=0, slot=14, func=3
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3439, revid=0x13
|
|
domain=0, bus=0, slot=14, func=4
|
|
class=06-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x342e, revid=0x13
|
|
domain=0, bus=0, slot=20, func=0
|
|
class=08-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3422, revid=0x13
|
|
domain=0, bus=0, slot=20, func=1
|
|
class=08-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3423, revid=0x13
|
|
domain=0, bus=0, slot=20, func=2
|
|
class=08-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
PCI Express ver.2 cap=0x0092
|
|
found-> vendor=0x8086, dev=0x3a40, revid=0x00
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=255
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x8086, dev=0x3a44, revid=0x00
|
|
domain=0, bus=0, slot=28, func=2
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=255
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.1 cap=0x0041
|
|
found-> vendor=0x8086, dev=0x3a34, revid=0x00
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
map[20]: type I/O Port, range 32, base 0x1000, size 5, enabled
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to IRQ 20
|
|
found-> vendor=0x8086, dev=0x3a35, revid=0x00
|
|
domain=0, bus=0, slot=29, func=1
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=7
|
|
map[20]: type I/O Port, range 32, base 0x1020, size 5, enabled
|
|
pcib0: matched entry for 0.29.INTB
|
|
pcib0: slot 29 INTB hardwired to IRQ 23
|
|
found-> vendor=0x8086, dev=0x3a36, revid=0x00
|
|
domain=0, bus=0, slot=29, func=2
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
map[20]: type I/O Port, range 32, base 0x1040, size 5, enabled
|
|
pcib0: matched entry for 0.29.INTC
|
|
pcib0: slot 29 INTC hardwired to IRQ 22
|
|
found-> vendor=0x8086, dev=0x3a39, revid=0x00
|
|
domain=0, bus=0, slot=29, func=3
|
|
class=0c-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=7
|
|
map[20]: type I/O Port, range 32, base 0x1060, size 5, enabled
|
|
pcib0: matched entry for 0.29.INTD
|
|
pcib0: slot 29 INTD hardwired to IRQ 23
|
|
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
|
|
domain=0, bus=0, slot=29, func=7
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=5
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf1df0000, size 10, enabled
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to IRQ 20
|
|
found-> vendor=0x8086, dev=0x244e, revid=0x90
|
|
domain=0, bus=0, slot=30, func=0
|
|
class=06-04-01, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x3a18, revid=0x00
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x3a20, revid=0x00
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=01-01-8f, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0040, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=255
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type I/O Port, range 32, base 0, size 3, port disabled
|
|
map[14]: type I/O Port, range 32, base 0, size 2, port disabled
|
|
map[18]: type I/O Port, range 32, base 0, size 3, port disabled
|
|
map[1c]: type I/O Port, range 32, base 0, size 2, port disabled
|
|
map[20]: type I/O Port, range 32, base 0, size 4, port disabled
|
|
map[24]: type I/O Port, range 32, base 0, size 4, port disabled
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] at device 1.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 4
|
|
pcib1: subordinate bus 4
|
|
pcib1: I/O decode 0x4000-0x4fff
|
|
pcib1: memory decode 0xfbd00000-0xfbffffff
|
|
pcib1: no prefetched decode
|
|
pci4.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib1
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x103c, dev=0x323a, revid=0x01
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=01-04-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 16 messages in map 0x10
|
|
PCI Express ver.2 cap=0x0002
|
|
map[10]: type Memory, range 64, base 0xfbe00000, size 21, enabled
|
|
pcib1: requested memory range 0xfbe00000-0xfbffffff: good
|
|
map[18]: type Memory, range 64, base 0xfbdf0000, size 12, enabled
|
|
pcib1: requested memory range 0xfbdf0000-0xfbdf0fff: good
|
|
map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled
|
|
pcib1: requested I/O range 0x4000-0x40ff: in range
|
|
pcib1: matched entry for 4.0.INTA
|
|
pcib1: slot 0 INTA hardwired to IRQ 28
|
|
ciss0.pci4.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
ciss0: <HP Smart Array P410i> [tentative] port 0x4000-0x40ff mem 0xfbdf0000-0xfbdf0fff,0xfbe00000-0xfbffffff irq 28 at device 0.0 on pci4
|
|
ciss0: Reserved 0x200000 bytes for rid 0x10 type 3 at 0xfbe00000
|
|
ciss0: using 256 of 1024 available commands
|
|
ciss0: firmware 5.06
|
|
ciss0: 1 SCSI channels
|
|
ciss0: signature 'CISS'
|
|
ciss0: valence 3
|
|
ciss0: supported I/O methods 0x78000007<READY,simple,performant>
|
|
ciss0: active I/O method 0x3<simple>
|
|
ciss0: 4G page base 0x00000000
|
|
ciss0: interrupt coalesce delay 1000us
|
|
ciss0: interrupt coalesce count 16
|
|
ciss0: max outstanding commands 1024
|
|
ciss0: bus types 0x200000
|
|
ciss0: server name 'CZC93258DW'
|
|
ciss0: heartbeat 0x48f
|
|
ciss0: 5 physical devices
|
|
ciss0: 2 logical drives
|
|
ciss0: logical drive (b0t0): RAID 1, 139776MB online
|
|
ciss0: logical drive (b0t1): RAID 1, 139776MB online
|
|
ciss0: <HP Smart Array P410i> [attached!] port 0x4000-0x40ff mem 0xfbdf0000-0xfbdf0fff,0xfbe00000-0xfbffffff irq 28 at device 0.0 on pci4
|
|
pci4: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] at device 1.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] at device 2.0 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 5
|
|
pcib2: subordinate bus 5
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: no prefetched decode
|
|
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PT02 - AE_NOT_FOUND
|
|
pci5.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci5: <ACPI PCI bus> [tentative] on pcib2
|
|
pci5: domain=0, physical bus=5
|
|
pci5: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] at device 2.0 on pci0
|
|
pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] at device 3.0 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 16
|
|
pcib3: subordinate bus 18
|
|
pcib3: I/O decode 0xf000-0xfff
|
|
pcib3: no prefetched decode
|
|
pci16.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pci16: <ACPI PCI bus> [tentative] on pcib3
|
|
pci16: domain=0, physical bus=16
|
|
pci16: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] at device 3.0 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] at device 4.0 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 19
|
|
pcib4: subordinate bus 19
|
|
pcib4: I/O decode 0xf000-0xfff
|
|
pcib4: no prefetched decode
|
|
pci19.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci19: <ACPI PCI bus> [tentative] on pcib4
|
|
pci19: domain=0, physical bus=19
|
|
pci19: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] at device 4.0 on pci0
|
|
pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib5: <ACPI PCI-PCI bridge> [tentative] at device 5.0 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 20
|
|
pcib5: subordinate bus 22
|
|
pcib5: I/O decode 0xf000-0xfff
|
|
pcib5: no prefetched decode
|
|
pci20.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pci20: <ACPI PCI bus> [tentative] on pcib5
|
|
pci20: domain=0, physical bus=20
|
|
pci20: <ACPI PCI bus> [attached!] on pcib5
|
|
pcib5: <ACPI PCI-PCI bridge> [attached!] at device 5.0 on pci0
|
|
pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib6: <ACPI PCI-PCI bridge> [tentative] at device 6.0 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 23
|
|
pcib6: subordinate bus 25
|
|
pcib6: I/O decode 0xf000-0xfff
|
|
pcib6: no prefetched decode
|
|
pci23.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci23: <ACPI PCI bus> [tentative] on pcib6
|
|
pci23: domain=0, physical bus=23
|
|
pci23: <ACPI PCI bus> [attached!] on pcib6
|
|
pcib6: <ACPI PCI-PCI bridge> [attached!] at device 6.0 on pci0
|
|
pcib7.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib7: <ACPI PCI-PCI bridge> [tentative] at device 7.0 on pci0
|
|
pcib7: domain 0
|
|
pcib7: secondary bus 13
|
|
pcib7: subordinate bus 15
|
|
pcib7: I/O decode 0xf000-0xfff
|
|
pcib7: no prefetched decode
|
|
pci13.pcib7.pci0.pcib0.acpi0.nexus0.root0
|
|
pci13: <ACPI PCI bus> [tentative] on pcib7
|
|
pci13: domain=0, physical bus=13
|
|
pci13: <ACPI PCI bus> [attached!] on pcib7
|
|
pcib7: <ACPI PCI-PCI bridge> [attached!] at device 7.0 on pci0
|
|
pcib8.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib8: <ACPI PCI-PCI bridge> [tentative] at device 8.0 on pci0
|
|
pcib8: domain 0
|
|
pcib8: secondary bus 10
|
|
pcib8: subordinate bus 12
|
|
pcib8: I/O decode 0xf000-0xfff
|
|
pcib8: no prefetched decode
|
|
pci10.pcib8.pci0.pcib0.acpi0.nexus0.root0
|
|
pci10: <ACPI PCI bus> [tentative] on pcib8
|
|
pci10: domain=0, physical bus=10
|
|
pci10: <ACPI PCI bus> [attached!] on pcib8
|
|
pcib8: <ACPI PCI-PCI bridge> [attached!] at device 8.0 on pci0
|
|
pcib9.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib9: <ACPI PCI-PCI bridge> [tentative] at device 9.0 on pci0
|
|
pcib9: domain 0
|
|
pcib9: secondary bus 7
|
|
pcib9: subordinate bus 9
|
|
pcib9: I/O decode 0xf000-0xfff
|
|
pcib9: no prefetched decode
|
|
pci7.pcib9.pci0.pcib0.acpi0.nexus0.root0
|
|
pci7: <ACPI PCI bus> [tentative] on pcib9
|
|
pci7: domain=0, physical bus=7
|
|
pci7: <ACPI PCI bus> [attached!] on pcib9
|
|
pcib9: <ACPI PCI-PCI bridge> [attached!] at device 9.0 on pci0
|
|
pcib10.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib10: <ACPI PCI-PCI bridge> [tentative] at device 10.0 on pci0
|
|
pcib10: domain 0
|
|
pcib10: secondary bus 6
|
|
pcib10: subordinate bus 6
|
|
pcib10: I/O decode 0xf000-0xfff
|
|
pcib10: no prefetched decode
|
|
pci6.pcib10.pci0.pcib0.acpi0.nexus0.root0
|
|
pci6: <ACPI PCI bus> [tentative] on pcib10
|
|
pci6: domain=0, physical bus=6
|
|
pci6: <ACPI PCI bus> [attached!] on pcib10
|
|
pcib10: <ACPI PCI-PCI bridge> [attached!] at device 10.0 on pci0
|
|
pci0: <base peripheral, interrupt controller> (vendor 0x8086, dev 0x342e) at device 20.0
|
|
pci0: <base peripheral, interrupt controller> (vendor 0x8086, dev 0x3422) at device 20.1
|
|
pci0: <base peripheral, interrupt controller> (vendor 0x8086, dev 0x3423) at device 20.2
|
|
pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib11: <ACPI PCI-PCI bridge> [tentative] at device 28.0 on pci0
|
|
pcib11: domain 0
|
|
pcib11: secondary bus 2
|
|
pcib11: subordinate bus 2
|
|
pcib11: I/O decode 0xf000-0xfff
|
|
pcib11: memory decode 0xf2000000-0xf5ffffff
|
|
pcib11: no prefetched decode
|
|
pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib11
|
|
pci2: domain=0, physical bus=2
|
|
found-> vendor=0x14e4, dev=0x1639, revid=0x20
|
|
domain=0, bus=2, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
MSI-X supports 9 messages in map 0x10
|
|
PCI Express ver.2 cap=0x0002
|
|
map[10]: type Memory, range 64, base 0xf4000000, size 25, enabled
|
|
pcib11: requested memory range 0xf4000000-0xf5ffffff: good
|
|
pcib11: matched entry for 2.0.INTA
|
|
pcib11: slot 0 INTA hardwired to IRQ 16
|
|
found-> vendor=0x14e4, dev=0x1639, revid=0x20
|
|
domain=0, bus=2, slot=0, func=1
|
|
class=02-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=5
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
MSI-X supports 9 messages in map 0x10
|
|
PCI Express ver.2 cap=0x0002
|
|
map[10]: type Memory, range 64, base 0xf2000000, size 25, enabled
|
|
pcib11: requested memory range 0xf2000000-0xf3ffffff: good
|
|
pcib11: matched entry for 2.0.INTB
|
|
pcib11: slot 0 INTB hardwired to IRQ 17
|
|
bce0.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [tentative] mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci2
|
|
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
|
|
alignment check failed
|
|
miibus0.bce0.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on bce0
|
|
brgphy0.miibus0.bce0.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
brgphy0: <BCM5709C 10/100/1000baseT PHY> [tentative] on miibus0
|
|
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
brgphy0: <BCM5709C 10/100/1000baseT PHY> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on bce0
|
|
bce0: bpf attached
|
|
bce0: MAC address: 00:25:b3:21:8e:02
|
|
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Flags(MFW[NCSI 2.0.6])
|
|
bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [attached!] mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci2
|
|
bce1.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [tentative] mem 0xf2000000-0xf3ffffff irq 17 at device 0.1 on pci2
|
|
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf2000000
|
|
alignment check failed
|
|
miibus1.bce1.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus1: <MII bus> [tentative] on bce1
|
|
brgphy1.miibus1.bce1.pci2.pcib11.pci0.pcib0.acpi0.nexus0.root0
|
|
brgphy1: <BCM5709C 10/100/1000baseT PHY> [tentative] on miibus1
|
|
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
brgphy1: <BCM5709C 10/100/1000baseT PHY> [attached!] on miibus1
|
|
miibus1: <MII bus> [attached!] on bce1
|
|
bce1: bpf attached
|
|
bce1: MAC address: 00:25:b3:21:8e:04
|
|
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Flags(MFW[NCSI 2.0.6])
|
|
bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [attached!] mem 0xf2000000-0xf3ffffff irq 17 at device 0.1 on pci2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib11
|
|
pcib11: <ACPI PCI-PCI bridge> [attached!] at device 28.0 on pci0
|
|
pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib12: <ACPI PCI-PCI bridge> [tentative] at device 28.2 on pci0
|
|
pcib12: domain 0
|
|
pcib12: secondary bus 3
|
|
pcib12: subordinate bus 3
|
|
pcib12: I/O decode 0xf000-0xfff
|
|
pcib12: memory decode 0xf6000000-0xf9ffffff
|
|
pcib12: no prefetched decode
|
|
pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib12
|
|
pci3: domain=0, physical bus=3
|
|
found-> vendor=0x14e4, dev=0x1639, revid=0x20
|
|
domain=0, bus=3, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
MSI-X supports 9 messages in map 0x10
|
|
PCI Express ver.2 cap=0x0002
|
|
map[10]: type Memory, range 64, base 0xf8000000, size 25, enabled
|
|
pcib12: requested memory range 0xf8000000-0xf9ffffff: good
|
|
pcib12: matched entry for 3.0.INTA
|
|
pcib12: slot 0 INTA hardwired to IRQ 18
|
|
found-> vendor=0x14e4, dev=0x1639, revid=0x20
|
|
domain=0, bus=3, slot=0, func=1
|
|
class=02-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0046, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 16 messages, 64 bit
|
|
MSI-X supports 9 messages in map 0x10
|
|
PCI Express ver.2 cap=0x0002
|
|
map[10]: type Memory, range 64, base 0xf6000000, size 25, enabled
|
|
pcib12: requested memory range 0xf6000000-0xf7ffffff: good
|
|
pcib12: matched entry for 3.0.INTB
|
|
pcib12: slot 0 INTB hardwired to IRQ 19
|
|
bce2.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [tentative] mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
|
|
bce2: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
miibus2.bce2.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus2: <MII bus> [tentative] on bce2
|
|
brgphy2.miibus2.bce2.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
brgphy2: <BCM5709C 10/100/1000baseT PHY> [tentative] on miibus2
|
|
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
brgphy2: <BCM5709C 10/100/1000baseT PHY> [attached!] on miibus2
|
|
miibus2: <MII bus> [attached!] on bce2
|
|
bce2: bpf attached
|
|
bce2: MAC address: 00:25:b3:21:8e:06
|
|
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3)
|
|
bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [attached!] mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
|
|
bce3.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [tentative] mem 0xf6000000-0xf7ffffff irq 19 at device 0.1 on pci3
|
|
bce3: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf6000000
|
|
alignment check failed
|
|
boundary check failed
|
|
alignment check failed
|
|
miibus3.bce3.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus3: <MII bus> [tentative] on bce3
|
|
brgphy3.miibus3.bce3.pci3.pcib12.pci0.pcib0.acpi0.nexus0.root0
|
|
brgphy3: <BCM5709C 10/100/1000baseT PHY> [tentative] on miibus3
|
|
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
brgphy3: <BCM5709C 10/100/1000baseT PHY> [attached!] on miibus3
|
|
miibus3: <MII bus> [attached!] on bce3
|
|
bce3: bpf attached
|
|
bce3: MAC address: 00:25:b3:21:8e:08
|
|
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3)
|
|
bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> [attached!] mem 0xf6000000-0xf7ffffff irq 19 at device 0.1 on pci3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib12
|
|
pcib12: <ACPI PCI-PCI bridge> [attached!] at device 28.2 on pci0
|
|
uhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
uhci0: <UHCI (generic) USB controller> [tentative] port 0x1000-0x101f irq 20 at device 29.0 on pci0
|
|
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
|
|
usb0.uhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usb0: <UHCI (generic) USB controller> [tentative] on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0.usb0.uhci0.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
|
|
usb0: <UHCI (generic) USB controller> [attached!] on uhci0
|
|
uhci0: <UHCI (generic) USB controller> [attached!] port 0x1000-0x101f irq 20 at device 29.0 on pci0
|
|
uhci1.pci0.pcib0.acpi0.nexus0.root0
|
|
uhci1: <UHCI (generic) USB controller> [tentative] port 0x1020-0x103f irq 23 at device 29.1 on pci0
|
|
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1020
|
|
usb1.uhci1.pci0.pcib0.acpi0.nexus0.root0
|
|
usb1: <UHCI (generic) USB controller> [tentative] on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1.usb1.uhci1.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
|
|
usb1: <UHCI (generic) USB controller> [attached!] on uhci1
|
|
uhci1: <UHCI (generic) USB controller> [attached!] port 0x1020-0x103f irq 23 at device 29.1 on pci0
|
|
uhci2.pci0.pcib0.acpi0.nexus0.root0
|
|
uhci2: <UHCI (generic) USB controller> [tentative] port 0x1040-0x105f irq 22 at device 29.2 on pci0
|
|
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1040
|
|
usb2.uhci2.pci0.pcib0.acpi0.nexus0.root0
|
|
usb2: <UHCI (generic) USB controller> [tentative] on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2.usb2.uhci2.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
|
|
usb2: <UHCI (generic) USB controller> [attached!] on uhci2
|
|
uhci2: <UHCI (generic) USB controller> [attached!] port 0x1040-0x105f irq 22 at device 29.2 on pci0
|
|
uhci3.pci0.pcib0.acpi0.nexus0.root0
|
|
uhci3: <UHCI (generic) USB controller> [tentative] port 0x1060-0x107f irq 23 at device 29.3 on pci0
|
|
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1060
|
|
usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0
|
|
usb3: <UHCI (generic) USB controller> [tentative] on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3.usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
|
|
usb3: <UHCI (generic) USB controller> [attached!] on uhci3
|
|
uhci3: <UHCI (generic) USB controller> [attached!] port 0x1060-0x107f irq 23 at device 29.3 on pci0
|
|
ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci0: <EHCI (generic) USB 2.0 controller> [tentative] mem 0xf1df0000-0xf1df03ff irq 20 at device 29.7 on pci0
|
|
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf1df0000
|
|
usb4: waiting for BIOS to give up control
|
|
usb4: EHCI version 1.0
|
|
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
|
|
usb4.ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usb4: <EHCI (generic) USB 2.0 controller> [tentative] on ehci0
|
|
usb4: USB revision 2.0
|
|
uhub4.usb4.ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb4
|
|
uhub4: 8 ports with 8 removable, self powered
|
|
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb4
|
|
usb4: <EHCI (generic) USB 2.0 controller> [attached!] on ehci0
|
|
ehci0: <EHCI (generic) USB 2.0 controller> [attached!] mem 0xf1df0000-0xf1df03ff irq 20 at device 29.7 on pci0
|
|
pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib13: <ACPI PCI-PCI bridge> [tentative] at device 30.0 on pci0
|
|
pcib13: domain 0
|
|
pcib13: secondary bus 1
|
|
pcib13: subordinate bus 1
|
|
pcib13: I/O decode 0x2000-0x3fff
|
|
pcib13: memory decode 0xf1e00000-0xf1ffffff
|
|
pcib13: prefetched decode 0xe8000000-0xefffffff
|
|
pcib13: Subtractively decoded bridge.
|
|
pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib13
|
|
pci1: domain=0, physical bus=1
|
|
found-> vendor=0x1002, dev=0x515e, revid=0x02
|
|
domain=0, bus=1, slot=3, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=7
|
|
powerspec 2 supports D0 D1 D2 D3 current D0
|
|
map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
|
|
pcib13: requested memory range 0xe8000000-0xefffffff: good
|
|
map[14]: type I/O Port, range 32, base 0x3000, size 8, enabled
|
|
pcib13: requested I/O range 0x3000-0x30ff: in range
|
|
map[18]: type Memory, range 32, base 0xf1ff0000, size 16, enabled
|
|
pcib13: requested memory range 0xf1ff0000-0xf1ffffff: good
|
|
pcib13: matched entry for 1.3.INTA
|
|
pcib13: slot 3 INTA hardwired to IRQ 23
|
|
found-> vendor=0x0e11, dev=0xb203, revid=0x03
|
|
domain=0, bus=1, slot=4, func=0
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type I/O Port, range 32, base 0x2800, size 8, enabled
|
|
pcib13: requested I/O range 0x2800-0x28ff: in range
|
|
map[14]: type Memory, range 32, base 0xf1fe0000, size 9, enabled
|
|
pcib13: requested memory range 0xf1fe0000-0xf1fe01ff: good
|
|
pcib13: matched entry for 1.4.INTA
|
|
pcib13: slot 4 INTA hardwired to IRQ 21
|
|
found-> vendor=0x0e11, dev=0xb204, revid=0x03
|
|
domain=0, bus=1, slot=4, func=2
|
|
class=08-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type I/O Port, range 32, base 0x3400, size 8, enabled
|
|
pcib13: requested I/O range 0x3400-0x34ff: in range
|
|
map[14]: type Memory, range 32, base 0xf1fd0000, size 11, enabled
|
|
pcib13: requested memory range 0xf1fd0000-0xf1fd07ff: good
|
|
map[18]: type Memory, range 32, base 0xf1fc0000, size 14, enabled
|
|
pcib13: requested memory range 0xf1fc0000-0xf1fc3fff: good
|
|
map[1c]: type Memory, range 32, base 0xf1f00000, size 19, enabled
|
|
pcib13: requested memory range 0xf1f00000-0xf1f7ffff: good
|
|
pcib13: matched entry for 1.4.INTB
|
|
pcib13: slot 4 INTB hardwired to IRQ 22
|
|
found-> vendor=0x103c, dev=0x3300, revid=0x00
|
|
domain=0, bus=1, slot=4, func=4
|
|
class=0c-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[20]: type I/O Port, range 32, base 0x3800, size 5, enabled
|
|
pcib13: requested I/O range 0x3800-0x381f: in range
|
|
pcib13: matched entry for 1.4.INTB
|
|
pcib13: slot 4 INTB hardwired to IRQ 22
|
|
found-> vendor=0x103c, dev=0x3302, revid=0x00
|
|
domain=0, bus=1, slot=4, func=6
|
|
class=0c-07-01, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf1ef0000, size 8, enabled
|
|
pcib13: requested memory range 0xf1ef0000-0xf1ef00ff: good
|
|
pcib13: matched entry for 1.4.INTA
|
|
pcib13: slot 4 INTA hardwired to IRQ 21
|
|
vgapci0.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0x3000-0x30ff mem 0xf1ff0000-0xf1ffffff,0xe8000000-0xefffffff irq 23 at device 3.0 on pci1
|
|
vgapci0: <VGA-compatible display> [attached!] port 0x3000-0x30ff mem 0xf1ff0000-0xf1ffffff,0xe8000000-0xefffffff irq 23 at device 3.0 on pci1
|
|
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 21
|
|
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 22
|
|
uhci4.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
uhci4: <UHCI (generic) USB controller> [tentative] port 0x3800-0x381f irq 22 at device 4.4 on pci1
|
|
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3800
|
|
uhci4: (New UHCI DeviceId=0x3300103c)
|
|
usb5.uhci4.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
usb5: <UHCI (generic) USB controller> [tentative] on uhci4
|
|
usb5: USB revision 1.0
|
|
uhub5.usb5.uhci4.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5
|
|
uhub5: 2 ports with 2 removable, self powered
|
|
uhub5: <(0x103c) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5
|
|
usb5: <UHCI (generic) USB controller> [attached!] on uhci4
|
|
uhci4: <UHCI (generic) USB controller> [attached!] port 0x3800-0x381f irq 22 at device 4.4 on pci1
|
|
pci1: <serial bus> (vendor 0x103c, dev 0x3302) at device 4.6 irq 21
|
|
pci1: <ACPI PCI bus> [attached!] on pcib13
|
|
pcib13: <ACPI PCI-PCI bridge> [attached!] at device 30.0 on pci0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
atapci0.pci0.pcib0.acpi0.nexus0.root0
|
|
atapci0: <Intel ATA controller> [tentative] at device 31.2 on pci0
|
|
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0x1080
|
|
pcib0: matched entry for 0.31.INTB
|
|
pcib0: slot 31 INTB hardwired to IRQ 17
|
|
ata2.atapci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ata2: <ATA channel 0> [tentative] on atapci0
|
|
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1090
|
|
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x1098
|
|
ata2: reset tp1 mask=00 ostat0=ff ostat1=ff
|
|
ata2: <ATA channel 0> [attached!] on atapci0
|
|
atapci0: <Intel ATA controller> [attached!] port 0x1098-0x109b,0x1090-0x1097,0x1080-0x108f irq 17 at device 31.2 on pci0
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] on acpi0
|
|
acpi_tz0.acpi0.nexus0.root0
|
|
acpi_tz0: <Thermal Zone> [tentative] on acpi0
|
|
[ACPI Debug] String [0xB] "_CRT Method"
|
|
[ACPI Debug] String [0xB] "_PSV Method"
|
|
acpi_tz0: <Thermal Zone> [attached!] on acpi0
|
|
atkbdc0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0.atkbdc0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: keyboard ID 0xffffffff (1)
|
|
atkbd: failed to reset the keyboard.
|
|
device_probe_and_attach: atkbd0 attach returned 6
|
|
psm0: current command byte:0065
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
|
|
sio0: irq maps: 0x4a1 0x4b1 0x4a1 0x4a1
|
|
sio0.acpi0.nexus0.root0
|
|
sio0: <Standard PC COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0: <Standard PC COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst2.cpu2.acpi0.nexus0.root0
|
|
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
|
|
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
|
|
cpu_pst2: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst3.cpu3.acpi0.nexus0.root0
|
|
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
|
|
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
|
|
cpu_pst3: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
cpu4.acpi0.nexus0.root0
|
|
cpu4: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst4.cpu4.acpi0.nexus0.root0
|
|
cpu_cst4: <ACPI CPU C-State> [tentative] on cpu4
|
|
cpu_cst4: <ACPI CPU C-State> [attached!] on cpu4
|
|
cpu_pst4: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu4: <ACPI CPU> [attached!] on acpi0
|
|
cpu5.acpi0.nexus0.root0
|
|
cpu5: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst5.cpu5.acpi0.nexus0.root0
|
|
cpu_cst5: <ACPI CPU C-State> [tentative] on cpu5
|
|
cpu_cst5: <ACPI CPU C-State> [attached!] on cpu5
|
|
cpu_pst5: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu5: <ACPI CPU> [attached!] on acpi0
|
|
cpu6.acpi0.nexus0.root0
|
|
cpu6: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst6.cpu6.acpi0.nexus0.root0
|
|
cpu_cst6: <ACPI CPU C-State> [tentative] on cpu6
|
|
cpu_cst6: <ACPI CPU C-State> [attached!] on cpu6
|
|
cpu_pst6: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu6: <ACPI CPU> [attached!] on acpi0
|
|
cpu7.acpi0.nexus0.root0
|
|
cpu7: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst7.cpu7.acpi0.nexus0.root0
|
|
cpu_cst7: <ACPI CPU C-State> [tentative] on cpu7
|
|
cpu_cst7: <ACPI CPU C-State> [attached!] on cpu7
|
|
cpu_pst7: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu7: <ACPI CPU> [attached!] on acpi0
|
|
cpu8.acpi0.nexus0.root0
|
|
cpu8: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst8.cpu8.acpi0.nexus0.root0
|
|
cpu_cst8: <ACPI CPU C-State> [tentative] on cpu8
|
|
cpu_cst8: <ACPI CPU C-State> [attached!] on cpu8
|
|
cpu_pst8: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu8: <ACPI CPU> [attached!] on acpi0
|
|
cpu9.acpi0.nexus0.root0
|
|
cpu9: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst9.cpu9.acpi0.nexus0.root0
|
|
cpu_cst9: <ACPI CPU C-State> [tentative] on cpu9
|
|
cpu_cst9: <ACPI CPU C-State> [attached!] on cpu9
|
|
cpu_pst9: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu9: <ACPI CPU> [attached!] on acpi0
|
|
cpu10.acpi0.nexus0.root0
|
|
cpu10: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst10.cpu10.acpi0.nexus0.root0
|
|
cpu_cst10: <ACPI CPU C-State> [tentative] on cpu10
|
|
cpu_cst10: <ACPI CPU C-State> [attached!] on cpu10
|
|
cpu_pst10: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu10: <ACPI CPU> [attached!] on acpi0
|
|
cpu11.acpi0.nexus0.root0
|
|
cpu11: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst11.cpu11.acpi0.nexus0.root0
|
|
cpu_cst11: <ACPI CPU C-State> [tentative] on cpu11
|
|
cpu_cst11: <ACPI CPU C-State> [attached!] on cpu11
|
|
cpu_pst11: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu11: <ACPI CPU> [attached!] on acpi0
|
|
cpu12.acpi0.nexus0.root0
|
|
cpu12: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst12.cpu12.acpi0.nexus0.root0
|
|
cpu_cst12: <ACPI CPU C-State> [tentative] on cpu12
|
|
cpu_cst12: <ACPI CPU C-State> [attached!] on cpu12
|
|
cpu_pst12: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu12: <ACPI CPU> [attached!] on acpi0
|
|
cpu13.acpi0.nexus0.root0
|
|
cpu13: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst13.cpu13.acpi0.nexus0.root0
|
|
cpu_cst13: <ACPI CPU C-State> [tentative] on cpu13
|
|
cpu_cst13: <ACPI CPU C-State> [attached!] on cpu13
|
|
cpu_pst13: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu13: <ACPI CPU> [attached!] on acpi0
|
|
cpu14.acpi0.nexus0.root0
|
|
cpu14: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst14.cpu14.acpi0.nexus0.root0
|
|
cpu_cst14: <ACPI CPU C-State> [tentative] on cpu14
|
|
cpu_cst14: <ACPI CPU C-State> [attached!] on cpu14
|
|
cpu_pst14: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu14: <ACPI CPU> [attached!] on acpi0
|
|
cpu15.acpi0.nexus0.root0
|
|
cpu15: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst15.cpu15.acpi0.nexus0.root0
|
|
cpu_cst15: <ACPI CPU C-State> [tentative] on cpu15
|
|
cpu_cst15: <ACPI CPU C-State> [attached!] on cpu15
|
|
cpu_pst15: Can't get _PCT package - AE_NOT_FOUND
|
|
cpu15: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
acpi0: <HP ProLiant> [attached!] at port 0x70-0x77,0x408-0x40f,0x4d0-0x4d1,0x20-0x3f,0xa0-0xbf,0x90-0x9f,0x50-0x53,0x700-0x71f,0x880-0x8ff,0x900-0x97f,0x10-0x1f,0xc80-0xc83,0xcd4-0xcd7,0xf50-0xf58,0xf0,0xca0-0xca1,0xca4-0xca5,0x2f8-0x2ff iomem 0xe0000000-0xe3ffffff,0xfe000000-0xfebfffff,0xe7ffe000-0xe7ffffff irq 9 on motherboard
|
|
atkbdc-: atkbdc0 exists, using next available unit number
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
aps_identify: will specify the port
|
|
ex_isa_identify()
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xcafff,0xcb000-0xcefff on isa0
|
|
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xcafff,0xcb000-0xcefff on isa0
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x330
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x334
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x230
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x234
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x130
|
|
bt0: Failed Status Reg Test - ff
|
|
bt_isa_probe: Probe failed at 0x134
|
|
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
|
|
aic0 [tentative] failed to probe on isa0
|
|
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 55 86
|
|
b4 1f 00 4f 0d 0e 00 00 07 80 92 08 8f 28 1f 8f
|
|
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: keyboard ID 0xffffffff (1)
|
|
atkbd: failed to reset the keyboard.
|
|
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
aps0 [tentative] failed to probe at port 0x1600-0x161e on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: irq maps: 0x4a1 0x4a9 0x4a1 0x4a1
|
|
sio2.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sio2 [tentative] at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio2: type 16550A
|
|
sio2 [attached!] at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
ppc0: cannot reserve I/O port range
|
|
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
ed0: not probed (disabled)
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
ukbd0.uhub3.usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0
|
|
ukbd0: <Raritan D2CIM-DVUSB, class 0/0, rev 1.10/0.00, addr 2> [tentative] on uhub3
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x350000
|
|
ukbd0: <Raritan D2CIM-DVUSB, class 0/0, rev 1.10/0.00, addr 2> [attached!] on uhub3
|
|
ums0.uhub3.usb3.uhci3.pci0.pcib0.acpi0.nexus0.root0
|
|
ums0: <Raritan D2CIM-DVUSB, class 0/0, rev 1.10/0.00, addr 2> [tentative] on uhub3
|
|
ums0: 3 buttons and Z dir.
|
|
ums0: <Raritan D2CIM-DVUSB, class 0/0, rev 1.10/0.00, addr 2> [attached!] on uhub3
|
|
ukbd1.uhub5.usb5.uhci4.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
ukbd1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> [tentative] on uhub5
|
|
kbd3 at ukbd1
|
|
kbd3: ukbd1, generic (0), config:0x0, flags:0x350000
|
|
ukbd1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> [attached!] on uhub5
|
|
ums1.uhub5.usb5.uhci4.pci1.pcib13.pci0.pcib0.acpi0.nexus0.root0
|
|
ums1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> [tentative] on uhub5
|
|
ums1: 3 buttons
|
|
ums1: <HP Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> [attached!] on uhub5
|
|
ndepotmags=33 x mag_cap=4 for nameibufs
|
|
ndepotmags=33 x mag_cap=4 for NFS mount
|
|
ndepotmags=33 x mag_cap=4 for NFS node
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_CRT Method"
|
|
[ACPI Debug] String [0xB] "_PSV Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_CRT Method"
|
|
[ACPI Debug] String [0xB] "_PSV Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
ndepotmags=33 x mag_cap=8 for vnodes
|
|
ndepotmags=33 x mag_cap=4 for UFS dirhash
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
ppp0: bpf attached
|
|
sl0: bpf attached
|
|
CAM: Configuring bus: ciss0
|
|
CAM: Configuring bus: ciss0
|
|
CAM: Configuring bus: ata0
|
|
CAM: Configuring 3 busses
|
|
CAM: Finished configuring bus: ciss0
|
|
CAM: Finished configuring bus: ata0
|
|
CAM: Finished configuring bus: ciss0
|
|
CAM: finished configuring all busses
|
|
pass0 at ciss0 bus 0 target 0 lun 0
|
|
pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
pass0: Serial Number 5012COMPAQ RAID
|
|
pass0: 135.168MB/s transfers
|
|
pass1 at ciss0 bus 0 target 1 lun 0
|
|
pass1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
pass1: Serial Number 5012COMPAQ RAID
|
|
pass1: 135.168MB/s transfers
|
|
sg0 at ciss0 bus 0 target 0 lun 0
|
|
sg0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
sg0: Serial Number 5012COMPAQ RAID
|
|
sg0: 135.168MB/s transfers
|
|
sg1 at ciss0 bus 0 target 1 lun 0
|
|
sg1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
sg1: Serial Number 5012COMPAQ RAID
|
|
sg1: 135.168MB/s transfers
|
|
No policy for da0 specified, or policy not found
|
|
disk scheduler: set policy of da0 to noop
|
|
No policy for da1 specified, or policy not found
|
|
disk scheduler: set policy of da1 to noop
|
|
da0 at ciss0 bus 0 target 0 lun 0
|
|
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
da0: Serial Number 5012COMPAQ RAID
|
|
da0: 135.168MB/s transfers
|
|
da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
|
|
can't re-use a leaf (5012COMPAQ__RAID)!
|
|
da1 at ciss0 bus 0 target 1 lun 0
|
|
da1: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-5 device
|
|
da1: Serial Number 5012COMPAQ RAID
|
|
da1: 135.168MB/s transfers
|
|
da1: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
da0: type 0xa5, start 63, end = 286675199, size 286675137 : OK
|
|
da1: invalid primary partition table: no magic
|
|
Mounting root from hammer:serno/5012COMPAQ__RAID.s1d
|
|
tryroot serno/5012COMPAQ__RAID.s1d
|
|
HAMMER(ROOT) recovery check seqno=0056e801
|
|
HAMMER(ROOT) recovery range 30000000007a53e0-30000000007a53e0
|
|
HAMMER(ROOT) recovery nexto 30000000007a53e0 endseqno=0056e802
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
bce0: Link is now UP.
|
|
bce0: Link is now DOWN.
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
bce0: Link is now UP.
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|
|
[ACPI Debug] String [0xB] "_TMP Method"
|