IC 0.16
MPTABLE: 0:29 INTA -> IOAPIC 0.23
MPTABLE: 0:29 INTB -> IOAPIC 0.19
MPTABLE: 0:29 INTC -> IOAPIC 0.16
MPTABLE: 0:29 INTD -> IOAPIC 0.18
MPTABLE: 0:26 INTA -> IOAPIC 0.16
MPTABLE: 0:26 INTB -> IOAPIC 0.21
MPTABLE: 0:26 INTC -> IOAPIC 0.18
MPTABLE: 0:26 INTD -> IOAPIC 0.19
MPTABLE: 0:27 INTA -> IOAPIC 0.22
MPTABLE: 0:25 INTA -> IOAPIC 0.20
MPTABLE: 0:22 INTA -> IOAPIC 0.16
MPTABLE: 0:22 INTB -> IOAPIC 0.19
MPTABLE: 0:22 INTC -> IOAPIC 0.18
MPTABLE: 0:22 INTD -> IOAPIC 0.17
MPTABLE: 0:28 INTA -> IOAPIC 0.16
MPTABLE: 0:28 INTB -> IOAPIC 0.17
MPTABLE: 0:28 INTC -> IOAPIC 0.18
MPTABLE: 0:28 INTD -> IOAPIC 0.19
MPTABLE: 0:1 INTA -> IOAPIC 0.16
MPTABLE: 0:1 INTB -> IOAPIC 0.17
MPTABLE: 0:1 INTC -> IOAPIC 0.18
MPTABLE: 0:1 INTD -> IOAPIC 0.19
MPTABLE: 0:6 INTA -> IOAPIC 0.19
MPTABLE: 0:6 INTB -> IOAPIC 0.16
MPTABLE: 0:6 INTC -> IOAPIC 0.17
MPTABLE: 0:6 INTD -> IOAPIC 0.18
MPTABLE: 0:4 INTA -> IOAPIC 0.16
MPTABLE: 0:4 INTB -> IOAPIC 0.17
MPTABLE: 0:4 INTC -> IOAPIC 0.18
MPTABLE: 0:4 INTD -> IOAPIC 0.19
MPTABLE: 3:0 INTA -> IOAPIC 0.17
MPTABLE: 3:0 INTB -> IOAPIC 0.18
MPTABLE: 3:0 INTC -> IOAPIC 0.19
MPTABLE: 3:0 INTD -> IOAPIC 0.16
MPTABLE: 2:0 INTA -> IOAPIC 0.16
MPTABLE: 2:0 INTB -> IOAPIC 0.17
MPTABLE: 2:0 INTC -> IOAPIC 0.18
MPTABLE: 2:0 INTD -> IOAPIC 0.19
MPTABLE: 0:2 INTA -> IOAPIC 0.16
MPTABLE: 4:0 INTA -> IOAPIC 0.17
MPTABLE: 4:0 INTB -> IOAPIC 0.18
MPTABLE: 4:0 INTC -> IOAPIC 0.19
MPTABLE: 4:0 INTD -> IOAPIC 0.16
MPTABLE: 4:1 INTA -> IOAPIC 0.18
MPTABLE: 4:1 INTB -> IOAPIC 0.19
MPTABLE: 4:1 INTC -> IOAPIC 0.16
MPTABLE: 4:1 INTD -> IOAPIC 0.17
MPTABLE: 1:0 INTA -> IOAPIC 0.16
MPTABLE: 1:0 INTB -> IOAPIC 0.17
MPTABLE: 1:0 INTC -> IOAPIC 0.18
MPTABLE: 1:0 INTD -> IOAPIC 0.19
Initialize MI interrupts
MWAIT hints (2 C1 hints):
  C1/0 hint 0x0000
  C1/1 hint 0x0001
  C2/0 hint 0x0010
MWAIT deep hints:
  C1/0 hint 0x0000
  C1/1 hint 0x0001
  C2/0 hint 0x0010
  C3/0 hint 0x0020
objcache: magazine cap [6, 134]
Finish MP startup
Active CPU Mask: 000000000000000f
TSC testing MP synchronization ...
cpu0: TSC testing MP synchronization ...
cpu0: TSC is MP synchronized after 55666 tries
cpu1: TSC testing MP synchronization ...
cpu2: TSC testing MP synchronization ...
cpu3: TSC testing MP synchronization ...
cpu1: TSC is MP synchronized after 52079 tries
cpu2: TSC is MP synchronized after 52398 tries
cpu3: TSC is MP synchronized after 52404 tries
TSC is MP synchronized
TSC: cputimer freq 103126194, shift 5
Preloaded elf kernel "kernel" at 0xffffffff825ed000.
Preloaded elf obj module "acpi.ko" at 0xffffffff825ed520.
Preloaded elf obj module "ehci.ko" at 0xffffffff825edeb8.
Preloaded elf obj module "xhci.ko" at 0xffffffff825ee710.
Bits within APICID: logical_CPU_bits: 1; core_bits: 3
CPU Topology: cores_per_chip: 2; threads_per_core: 2; chips_per_package: 1;
Start usched_dfly helpers on cpus:
    cpu0 - HyperThreading available. Core siblings: cpus(0, 2) 
    cpu1 - HyperThreading available. Core siblings: cpus(1, 3) 
    cpu2 - HyperThreading available. Core siblings: cpus(0, 2) 
    cpu3 - HyperThreading available. Core siblings: cpus(1, 3) 
start dummy scheduler helpers on cpus: 0 1 2 3
Start usched_bsd4 helpers on cpus:
    cpu0 - HyperThreading available. Core siblings: cpus(0, 2) 
    cpu1 - HyperThreading available. Core siblings: cpus(1, 3) 
    cpu2 - HyperThreading available. Core siblings: cpus(0, 2) 
    cpu3 - HyperThreading available. Core siblings: cpus(1, 3) 
wdog: In-kernel automatic watchdog reset enabled
sensors: tasks default to cpu3
ath_dfs: WTF module
wlan: <802.11 Link Layer>
ath_rate: <SampleRate bit-rate selection algorithm>
kbd: new array size 4
kbd1 at kbdmux0
crypto: <crypto core>
md0: Malloc disk
md0: invalid primary partition table: no magic
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hpt27xx: RocketRAID 27xx controller driver v1.0
IOAPIC: rman cpu0 0 - 0
IOAPIC: rman cpu0 4 - 4
IOAPIC: rman cpu0 8 - 9
IOAPIC: rman cpu0 12 - 12
IOAPIC: rman cpu0 16 - 95
IOAPIC: rman cpu0 97 - 191
IOAPIC: rman cpu1 1 - 1
IOAPIC: rman cpu1 5 - 5
IOAPIC: rman cpu1 13 - 13
IOAPIC: rman cpu1 16 - 95
IOAPIC: rman cpu1 97 - 191
IOAPIC: rman cpu2 6 - 6
IOAPIC: rman cpu2 10 - 10
IOAPIC: rman cpu2 14 - 14
IOAPIC: rman cpu2 16 - 95
IOAPIC: rman cpu2 97 - 191
IOAPIC: rman cpu3 3 - 3
IOAPIC: rman cpu3 7 - 7
IOAPIC: rman cpu3 11 - 11
IOAPIC: rman cpu3 15 - 95
IOAPIC: rman cpu3 97 - 191
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD858080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD861F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000CD8581A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
ACPI: FACS 0x00000000CD872080 000040
ACPI: APIC 0x00000000CD862068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000CD8620E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: ASF! 0x00000000CD862128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000CD8621D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x00000000CD862210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 0x00000000CD8629F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000CD862AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CD862B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CD862E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000CD863840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000CD8642D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0.nexus0.root0
acpi0: <ALASKA A M I> [tentative] on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
PCIe: Memory Mapped configuration base @ 0xf8000000, bus [0, 63]
PCIe: Using Memory Mapped configuration
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI testing level/high
IOAPIC: irq 9, gsi 9 edge/high -> level/high
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0.acpi0.nexus0.root0
acpi_timer0 [tentative] on acpi0
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] on acpi0
acpi_hpet0.acpi0.nexus0.root0
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086, rev: 0x1, num: 7, opts: legacy_route 64-bit
acpi_hpet0: frequency 14318180
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
unknown: not probed (disabled)
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 6 10 11 12 14 15
  Validation          0    3   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 6 10 11 12 14 15
  Validation          0    3   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pcib0.acpi0.nexus0.root0
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
pci0.pcib0.acpi0.nexus0.root0
pci0: <ACPI PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x0150, revid=0x09
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x0162, revid=0x09
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xf7800000, size 22, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0xf000, size  6, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to GSI 16, IRQ 16
found->	vendor=0x8086, dev=0x1e31, revid=0x04
	domain=0, bus=0, slot=20, func=0
	class=0c-03-30, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xf7c00000, size 16, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to GSI 16, IRQ 16
unknown: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf7c00000
xhci early: xhci is not owned by SMM
found->	vendor=0x8086, dev=0x1e3a, revid=0x04
	domain=0, bus=0, slot=22, func=0
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf7c1a000, size  4, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to GSI 16, IRQ 16
found->	vendor=0x8086, dev=0x1e2d, revid=0x04
	domain=0, bus=0, slot=26, func=0
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf7c18000, size 10, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to GSI 16, IRQ 16
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7c18000
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x1e20, revid=0x04
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0091[ROOTDEV]
	map[10]: type Memory, range 64, base 0xf7c10000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to GSI 22, IRQ 22
found->	vendor=0x8086, dev=0x1e10, revid=0xc4
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0004b200
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
found->	vendor=0x8086, dev=0x1e18, revid=0xc4
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024b200
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
found->	vendor=0x8086, dev=0x244e, revid=0xc4
	domain=0, bus=0, slot=28, func=5
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x002cb200
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to GSI 17, IRQ 17
found->	vendor=0x8086, dev=0x1e26, revid=0x04
	domain=0, bus=0, slot=29, func=0
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf7c17000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to GSI 23, IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7c17000
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x1e44, revid=0x04
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1e02, revid=0x04
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0xf0b0, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xf0a0, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xf090, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xf080, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xf060, size  5, enabled
	map[24]: type Memory, range 32, base 0xf7c16000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to GSI 19, IRQ 19
found->	vendor=0x8086, dev=0x1e22, revid=0x04
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	map[10]: type Memory, range 64, base 0xf7c15000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to GSI 18, IRQ 18
vgapci0.pci0.pcib0.acpi0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
vgapci0: <VGA-compatible display> [attached!] port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
xhci0.pci0.pcib0.acpi0.nexus0.root0
xhci0: <Intel Panther Point USB 3.0 controller> [tentative] mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
alignment check failed
boundary check failed
alignment check failed
xhci0: attempting to allocate 1 MSI vector (8 supported)
alloc MSI intr 16 on cpu1
xhci0: using IRQ 16 on cpu1 for MSI
xhci0: MSI enabled
map MSI intr 16 on cpu1
xhci0: Port routing mask set to 0xffffffff
usbus0.xhci0.pci0.pcib0.acpi0.nexus0.root0
usbus0 [tentative] on xhci0
xhci0: usbpf: Attached
usbus0 [attached!] on xhci0
xhci0: <Intel Panther Point USB 3.0 controller> [attached!] mem 0xf7c00000-0xf7c0ffff irq 16,16 at device 20.0 on pci0
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
ehci0.pci0.pcib0.acpi0.nexus0.root0
ehci0: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7c18000-0xf7c183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
usbus1.ehci0.pci0.pcib0.acpi0.nexus0.root0
usbus1 [tentative] on ehci0
ehci0: usbpf: Attached
usbus1 [attached!] on ehci0
ehci0: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7c18000-0xf7c183ff irq 16 at device 26.0 on pci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
pcib1.pci0.pcib0.acpi0.nexus0.root0
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
pci1: <ACPI PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
pci1: <ACPI PCI bus> [attached!] on pcib1
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
pcib2.pci0.pcib0.acpi0.nexus0.root0
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.4 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xe000-0xefff
pcib2:   prefetched decode 0xf0000000-0xf00fffff
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
pci2: <ACPI PCI bus> [tentative] on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x10ec, dev=0x8168, revid=0x06
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 4 messages in map 0x20
	PCI Express ver.2 cap=0x0202[DEVICE]
	map[10]: type I/O Port, range 32, base 0xe000, size  8, enabled
pcib2: requested I/O range 0xe000-0xe0ff: in range
	map[18]: type Prefetchable Memory, range 64, base 0xf0004000, size 12, enabled
pcib2: requested memory range 0xf0004000-0xf0004fff: good
	map[20]: type Prefetchable Memory, range 64, base 0xf0000000, size 14, enabled
pcib2: requested memory range 0xf0000000-0xf0003fff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to GSI 16, IRQ 16
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
re0.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0xe000-0xe0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf0004000
re0: disable ASPM
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
miibus0.re0.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
miibus0: <MII bus> [tentative] on re0
rgephy0: rev: 5
rgephy0.miibus0.re0.pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
rgephy0: <8211B/RTL8169S/8110S media interface> [tentative] on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rgephy0: <8211B/RTL8169S/8110S media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on re0
usbus1: 480Mbps High Speed USB v2.0
re0: bpf attached
re0: MAC address: bc:5f:f4:49:91:04
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0xe000-0xe0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci2
pci2: <ACPI PCI bus> [attached!] on pcib2
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.4 on pci0
pcib3.pci0.pcib0.acpi0.nexus0.root0
pcib3: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 28.5 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   4
pcib3:   I/O decode        0xf000-0xfff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
pci3: <ACPI PCI bus> [tentative] on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x1b21, dev=0x1080, revid=0x03
	domain=0, bus=3, slot=0, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to GSI 17, IRQ 17
pcib4.pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 0.0 on pci3
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xfff000-0xfff
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pci4.pcib4.pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
pci4: <ACPI PCI bus> [tentative] on pcib4
pci4: domain=0, physical bus=4
pci4: <ACPI PCI bus> [attached!] on pcib4
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 0.0 on pci3
pci3: <ACPI PCI bus> [attached!] on pcib3
pcib3: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 28.5 on pci0
ehci1.pci0.pcib0.acpi0.nexus0.root0
ehci1: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: EHCI version 1.0
usbus2.ehci1.pci0.pcib0.acpi0.nexus0.root0
usbus2 [tentative] on ehci1
ehci1: usbpf: Attached
usbus2 [attached!] on ehci1
ehci1: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0
isab0.pci0.pcib0.acpi0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
ahci0.pci0.pcib0.acpi0.nexus0.root0
ahci0: <AHCI-PCI-SATA> [tentative] port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097,0xf0a0-0xf0a3,0xf0b0-0xf0b7 mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vector (1 supported)
alloc MSI intr 17 on cpu0
ahci0: using IRQ 17 on cpu0 for MSI
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf7c16000
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 40006<HPCP,POD,SUD>
ahci0.0: START HARDRESET
ahci0.1: Caps 40006<HPCP,POD,SUD>
ahci0.1: START HARDRESET
ahci0.2: Caps 40006<HPCP,POD,SUD>
ahci0.3: Caps 40006<HPCP,POD,SUD>
ahci0.3: START HARDRESET
ahci0.4: Caps 40006<HPCP,POD,SUD>
ahci0.4: START HARDRESET
ahci0.5: Caps 40006<HPCP,POD,SUD>
ahci0.5: START HARDRESET
map MSI intr 17 on cpu0
ahci0.2: START HARDRESET
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x1a40> at usbus2
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus2
uhub5: MTT enabled
uhub5: 7 ports with 7 removable, self powered
ahci0.0: Port appears to be unplugged
ahci0.1: Port appears to be unplugged
ahci0.5: Port appears to be unplugged
ahci0.4: END HARDRESET 0
ahci0.2: END HARDRESET 0
ahci0.3: END HARDRESET 0
ahci0.4: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
ahci0.2: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
ahci0.3: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
ahci0.3: sig 00000101
ahci0.4: sig 00000101
ahci0.2: sig 00000101
ahci0.3: END SOFTRESET
ahci0.2: END SOFTRESET
ahci0.4: END SOFTRESET
ugen2.4: <vendor 0x04d9> at usbus2
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
ahci0.1: No device detected
ahci0.0: No device detected
ahci0.5: No device detected
ahci0.0: END HARDRESET 19
ahci0.1: END HARDRESET 19
ahci0.5: END HARDRESET 19
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.2: Set dummy xfer mode to 46
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.3: Set dummy xfer mode to 46
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
ahci0.4: Set dummy xfer mode to 46
ahci0: <AHCI-PCI-SATA> [attached!] port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097,0xf0a0-0xf0a3,0xf0b0-0xf0b7 mem 0xf7c16000-0xf7c167ff irq 17,19 at device 31.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
pci0: <ACPI PCI bus> [attached!] on pcib0
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0xc09 0xc19 0xc09 0xc09
sio0.acpi0.nexus0.root0
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1D5831800 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
cpu_cst0: non-C3 0
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0.cpu0.acpi0.nexus0.root0
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
cpu_pst0: create pkg domain0, coord 0xfe
cpu_pst0: control reg 127 0
cpu_pst0: status reg 127 0
cpu_pst0: freq 3300, pwr 55000, xlat 10, blat 10, cv 00002100, sv 00002100
cpu_pst0: freq 3200, pwr 52199, xlat 10, blat 10, cv 00002000, sv 00002000
cpu_pst0: freq 3100, pwr 49990, xlat 10, blat 10, cv 00001f00, sv 00001f00
cpu_pst0: freq 3000, pwr 47821, xlat 10, blat 10, cv 00001e00, sv 00001e00
cpu_pst0: freq 2800, pwr 43604, xlat 10, blat 10, cv 00001c00, sv 00001c00
cpu_pst0: freq 2700, pwr 41563, xlat 10, blat 10, cv 00001b00, sv 00001b00
cpu_pst0: freq 2600, pwr 39553, xlat 10, blat 10, cv 00001a00, sv 00001a00
cpu_pst0: freq 2500, pwr 37581, xlat 10, blat 10, cv 00001900, sv 00001900
cpu_pst0: freq 2400, pwr 35648, xlat 10, blat 10, cv 00001800, sv 00001800
cpu_pst0: freq 2300, pwr 33754, xlat 10, blat 10, cv 00001700, sv 00001700
cpu_pst0: freq 2200, pwr 31904, xlat 10, blat 10, cv 00001600, sv 00001600
cpu_pst0: freq 2100, pwr 30084, xlat 10, blat 10, cv 00001500, sv 00001500
cpu_pst0: freq 1900, pwr 26557, xlat 10, blat 10, cv 00001300, sv 00001300
cpu_pst0: freq 1800, pwr 24849, xlat 10, blat 10, cv 00001200, sv 00001200
cpu_pst0: freq 1700, pwr 23177, xlat 10, blat 10, cv 00001100, sv 00001100
cpu_pst0: freq 1600, pwr 21545, xlat 10, blat 10, cv 00001000, sv 00001000
cpu_pst0: _PPC 0
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
clockmod0.cpu0.acpi0.nexus0.root0
clockmod0: <CPU clock modulation> [tentative] on cpu0
clock modulation:
  0x0000 100.00%
  0x001f 93.75%
  0x001e 87.50%
  0x001d 81.25%
  0x001c 75.00%
  0x001b 68.75%
  0x001a 62.50%
  0x0019 56.25%
  0x0018 50.00%
  0x0017 43.75%
  0x0016 37.50%
  0x0015 31.25%
  0x0014 25.00%
  0x0013 18.75%
  0x0012 12.50%
  0x0011 6.25%
clockmod0: <CPU clock modulation> [attached!] on cpu0
perfbias0.cpu0.acpi0.nexus0.root0
perfbias0: <CPU perf-energy bias> [tentative] on cpu0
perfbias0: <CPU perf-energy bias> [attached!] on cpu0
coretemp0.cpu0.acpi0.nexus0.root0
coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
coretemp0: Setting TjMax=105
coretemp0: master cpu2, count 2
coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
cpu0: <ACPI CPU> [attached!] on acpi0
cpu1.acpi0.nexus0.root0
cpu1: <ACPI CPU> [tentative] on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0A33BBE00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE033B79A40 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
cpu_cst1.cpu1.acpi0.nexus0.root0
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
cpu_cst1: non-C3 0
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
cpu_pst1.cpu1.acpi0.nexus0.root0
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
cpu_pst1: control reg 127 0
cpu_pst1: status reg 127 0
cpu_pst1: _PPC 0
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
clockmod1.cpu1.acpi0.nexus0.root0
clockmod1: <CPU clock modulation> [tentative] on cpu1
clockmod1: <CPU clock modulation> [attached!] on cpu1
perfbias1.cpu1.acpi0.nexus0.root0
perfbias1: <CPU perf-energy bias> [tentative] on cpu1
perfbias1: <CPU perf-energy bias> [attached!] on cpu1
coretemp1.cpu1.acpi0.nexus0.root0
coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
coretemp1: Setting TjMax=105
coretemp1: master cpu3, count 2
coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
cpu1: <ACPI CPU> [attached!] on acpi0
cpu2.acpi0.nexus0.root0
cpu2: <ACPI CPU> [tentative] on acpi0
cpu_cst2.cpu2.acpi0.nexus0.root0
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
cpu_cst2: non-C3 0
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
cpu_pst2.cpu2.acpi0.nexus0.root0
cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
cpu_pst2: control reg 127 0
cpu_pst2: status reg 127 0
cpu_pst2: _PPC 0
cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
clockmod2.cpu2.acpi0.nexus0.root0
clockmod2: <CPU clock modulation> [tentative] on cpu2
clockmod2: <CPU clock modulation> [attached!] on cpu2
perfbias2.cpu2.acpi0.nexus0.root0
perfbias2: <CPU perf-energy bias> [tentative] on cpu2
perfbias2: <CPU perf-energy bias> [attached!] on cpu2
coretemp2.cpu2.acpi0.nexus0.root0
coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
coretemp2: Setting TjMax=105
coretemp2: master cpu2, count 2
coretemp2: pkg master cpu3
coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
cpu2: <ACPI CPU> [attached!] on acpi0
cpu3.acpi0.nexus0.root0
cpu3: <ACPI CPU> [tentative] on acpi0
cpu_cst3.cpu3.acpi0.nexus0.root0
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
cpu_cst3: non-C3 0
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
cpu_pst3.cpu3.acpi0.nexus0.root0
cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
cpu_pst3: control reg 127 0
cpu_pst3: status reg 127 0
cpu_pst3: _PPC 0
cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
clockmod3.cpu3.acpi0.nexus0.root0
clockmod3: <CPU clock modulation> [tentative] on cpu3
clockmod3: <CPU clock modulation> [attached!] on cpu3
perfbias3.cpu3.acpi0.nexus0.root0
perfbias3: <CPU perf-energy bias> [tentative] on cpu3
perfbias3: <CPU perf-energy bias> [attached!] on cpu3
coretemp3.cpu3.acpi0.nexus0.root0
coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
coretemp3: Setting TjMax=105
coretemp3: master cpu3, count 2
coretemp3: pkg master cpu3
coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
cpu3: <ACPI CPU> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ACPI: Enabled 4 GPEs in block 00 to 3F
acpi0: <ALASKA A M I> [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x72-0x7f,0x80,0x84-0x86,0x88,0x8c-0x8e,0x90-0x9f,0xa2-0xbf,0xe0-0xef,0x4d0-0x4d1,0x290-0x29f,0x454-0x457,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x680-0x69f,0x1000-0x100f,0xffff,0xffff,0x400-0x453,0x458-0x47f,0x500-0x57f,0x164e-0x164f iomem 0x20000000-0x201fffff,0x40004000-0x40004fff,0xfed1c000-0xfed1ffff,0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xff000000-0xffffffff,0xfee00000-0xfeefffff,0xdfa00000-0xdfa00fff,0xfed40000-0xfed44fff irq 9 on motherboard
sio-: sio0 exists, using next available unit number
sio-: sio1 exists, using next available unit number
sio-: sio2 exists, using next available unit number
sio-: sio3 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
adv0 [tentative] failed to probe on isa0
atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
cpu_cst: global Cx count 3
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
psm0: current command byte:0065
psm0: strange result for test aux port (2).
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: no EFI framebuffer found.
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
sc0: <System console> [tentative] at flags 0x500 on isa0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
C2 -> cpu specific C2 sub state 0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x500 on isa0
lm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
lm0: <Winbond W83627DHG Hardware Monitor> [tentative] at port 0x290-0x297 on isa0
lm0: <Winbond W83627DHG Hardware Monitor> [attached!] at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
wbsio0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
wbsio0: <Winbond LPC Super I/O NCT6776F rev 0x33> [tentative] at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
device_probe_and_attach: wbsio0 attach returned 6
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio2: can't drain, serial port might not exist, disabling
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio3: not probed (disabled)
sio4: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
C3 -> cpu specific C3 sub state 0
usbpf: Initialized
lo0: bpf attached
ppp0: bpf attached
sl0: bpf attached
crypto: <crypto device>
faith0: bpf attached
hptrr: no controller detected.
hpt27xx: no controller detected.
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring bus: ahci0
CAM: Configuring 6 busses
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: Finished configuring bus: ahci0
CAM: finished configuring all busses
pass0 at ahci0 bus 2 target 0 lun 0
pass0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
pass0: Serial Number WD-WX41E72JL513
pass0: 300.000MB/s transfers
pass1 at ahci0 bus 3 target 0 lun 0
pass1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
pass1: Serial Number WD-WXP1C42A2867
pass1: 300.000MB/s transfers
pass2 at ahci0 bus 4 target 0 lun 0
pass2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
pass2: Serial Number WD-WMAYP5624974
pass2: 300.000MB/s transfers
sg0 at ahci0 bus 2 target 0 lun 0
sg0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
sg0: Serial Number WD-WX41E72JL513
sg0: 300.000MB/s transfers
sg1 at ahci0 bus 3 target 0 lun 0
sg1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
sg1: Serial Number WD-WXP1C42A2867
sg1: 300.000MB/s transfers
sg2 at ahci0 bus 4 target 0 lun 0
sg2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
sg2: Serial Number WD-WMAYP5624974
sg2: 300.000MB/s transfers
da0: si_iosize_max:131072
da1: si_iosize_max:131072
da2: si_iosize_max:131072
da0 at ahci0 bus 2 target 0 lun 0
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WX41E72JL513
da0: 300.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da1 at ahci0 bus 3 target 0 lun 0
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
da1: Serial Number WD-WXP1C42A2867
da1: 300.000MB/s transfers
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da2 at ahci0 bus 4 target 0 lun 0
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
da2: Serial Number WD-WMAYP5624974
da2: 300.000MB/s transfers
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da0: type 0xa5, start 63, end = 488279609, size 488279547 : OK
da0: type 0xa5, start 488282112, end = 681641983, size 193359872 
da0: C/H/S start 1023/39/46 (16501446) != start 488282112: invalid
da0: C/H/S end 1023/64/2 (16502977) != end 681641983: invalid
da0: type 0xa6, start 681641984, end = 875001855, size 193359872 
da0: C/H/S start 1023/64/3 (16502978) != start 681641984: invalid
da0: C/H/S end 1023/88/22 (16504509) != end 875001855: invalid
da0: type 0x5, start 875003902, end = 1465147391, size 590143490 
da0: C/H/S start 1023/120/53 (16506556) != start 875003902: invalid
da0: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
da0: type 0x83, start 875003904, end = 1070313471, size 195309568 
da0: C/H/S start 1023/254/63 (16515008) != start 875003904: invalid
da0: C/H/S end 1023/254/63 (16515008) != end 1070313471: invalid
da0<extended>: type 0x5, start 1070314560, end = 1136719871, size 66405312 
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1070314560: invalid
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
da0: type 0x82, start 1070315520, end = 1136719871, size 66404352 
da0: C/H/S start 1023/254/63 (16515008) != start 1070315520: invalid
da0: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
da0<extended>: type 0x5, start 1136719872, end = 1302734847, size 166014976 
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1136719872: invalid
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
da0: type 0x83, start 1136721920, end = 1302734847, size 166012928 
da0: C/H/S start 1023/254/63 (16515008) != start 1136721920: invalid
da0: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
da0<extended>: type 0x5, start 1302734848, end = 1458984959, size 156250112 
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1302734848: invalid
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
da0: type 0x83, start 1302736896, end = 1458984959, size 156248064 
da0: C/H/S start 1023/254/63 (16515008) != start 1302736896: invalid
da0: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
da0<extended>: type 0x5, start 1458984960, end = 1465147391, size 6162432 
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1458984960: invalid
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
da0: type 0x83, start 1458987008, end = 1465147391, size 6160384 
da0: C/H/S start 1023/254/63 (16515008) != start 1458987008: invalid
da0: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
da1: type 0xa5, start 126, end = 468750302, size 468750177 : OK
da1: type 0xa6, start 468750336, end = 662110207, size 193359872 
da1: C/H/S start 1023/91/34 (16504710) != start 468750336: invalid
da1: C/H/S end 1023/115/53 (16506241) != end 662110207: invalid
da1: type 0xa9, start 662110208, end = 855470079, size 193359872 
da1: C/H/S start 1023/115/54 (16506242) != start 662110208: invalid
da1: C/H/S end 1023/140/10 (16507773) != end 855470079: invalid
da1: type 0x5, start 855472126, end = 1465147391, size 609675266 
da1: C/H/S start 1023/172/41 (16509820) != start 855472126: invalid
da1: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
da1: type 0x83, start 855472128, end = 1048829951, size 193357824 
da1: C/H/S start 0/0/3 (2) != start 855472128: invalid
da1: C/H/S end 1023/246/53 (16514494) != end 1048829951: invalid
da1<extended>: type 0x5, start 1048829952, end = 1115236351, size 66406400 
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1048829952: invalid
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1115236351: invalid
da1: type 0x82, start 1048832000, end = 1115236351, size 66404352 
da1: C/H/S start 0/32/33 (2048) != start 1048832000: invalid
da1: C/H/S end 1023/154/53 (16508698) != end 1115236351: invalid
da1<extended>: type 0x5, start 1115236352, end = 1291018239, size 175781888 
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1115236352: invalid
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1291018239: invalid
ugen2.5: <Logitech> at usbus2
da1: type 0x83, start 1115238400, end = 1291018239, size 175779840 
da1: C/H/S start 0/32/33 (2048) != start 1115238400: invalid
da1: C/H/S end 1023/233/44 (16513666) != end 1291018239: invalid
da1<extended>: type 0x5, start 1291018240, end = 1457033215, size 166014976 
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1291018240: invalid
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1457033215: invalid
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
da1: type 0x83, start 1291020288, end = 1457033215, size 166012928 
da1: C/H/S start 0/32/33 (2048) != start 1291020288: invalid
da1: C/H/S end 1023/243/22 (16514274) != end 1457033215: invalid
da1<extended>: type 0x5, start 1457033216, end = 1465147391, size 8114176 
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1457033216: invalid
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
da1: type 0x83, start 1457035264, end = 1465147391, size 8112128 
da1: C/H/S start 0/32/33 (2048) != start 1457035264: invalid
da1: C/H/S end 505/21/28 (8145990) != end 1465147391: invalid
da2: type 0xa5, start 63, end = 195035198, size 195035136 : OK
da2: type 0xa9, start 195318270, end = 429690554, size 234372285 
da2: C/H/S start 1023/0/1 (16498944) != start 195318270: invalid
da2: C/H/S end 1023/254/63 (16515008) != end 429690554: invalid
da2: type 0xa5, start 429690555, end = 976760063, size 547069509 : OK
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
Mounting root from hammer:serno/WD-WX41E72JL513.s1d
HAMMER(ROOT) recovery check seqno=726e8dc6
HAMMER(ROOT) recovery range 300000001f2ae030-300000001f2ae030
HAMMER(ROOT) recovery nexto 300000001f2ae030 endseqno=726e8dc7
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 14276k, remaining available: 131072k
Mounting devfs
start_init: trying /sbin/init
kthread 0xffffffe204472980 syncer6 has exited
kthread 0xffffffe204472f00 syncer7 has exited
kthread 0xffffffe1d5982c80 syncer8 has exited
kthread 0xffffffe09dfe0600 syncer9 has exited
kthread 0xffffffe204472f00 syncer10 has exited
kthread 0xffffffe204473480 syncer11 has exited
kthread 0xffffffe204473480 syncer12 has exited
re0: adjust device control 0x2000 -> 0x5000
swap low/high-water marks set to 335543/503314
info: [drm] Initialized drm 1.1.0 20060810
drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
drm0 [tentative] on vgapci0
vgapci0: attempting to allocate 1 MSI vector (1 supported)
alloc MSI intr 18 on cpu1
vgapci0: using IRQ 18 on cpu1 for MSI
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x18) = 0xe0000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x18) = 0x10000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
info: [drm] Memory usable by graphics device = 2048M
iicbus0.iicbb0.intel_iicbb1.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus0: <Philips I2C bus> [tentative] on iicbb0 addr 0xff
iicbus0: <Philips I2C bus> [attached!] on iicbb0 addr 0xff
iicbus2.iicbb1.intel_iicbb2.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus2: <Philips I2C bus> [tentative] on iicbb1 addr 0xff
iicbus2: <Philips I2C bus> [attached!] on iicbb1 addr 0xff
iicbus4.iicbb2.intel_iicbb3.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus4: <Philips I2C bus> [tentative] on iicbb2 addr 0xff
iicbus4: <Philips I2C bus> [attached!] on iicbb2 addr 0xff
iicbus6.iicbb3.intel_iicbb4.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus6: <Philips I2C bus> [tentative] on iicbb3 addr 0xff
iicbus6: <Philips I2C bus> [attached!] on iicbb3 addr 0xff
iicbus8.iicbb4.intel_iicbb5.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus8: <Philips I2C bus> [tentative] on iicbb4 addr 0xff
iicbus8: <Philips I2C bus> [attached!] on iicbb4 addr 0xff
iicbus10.iicbb5.intel_iicbb6.drm0.vgapci0.pci0.pcib0.acpi0.nexus0.root0
iicbus10: <Philips I2C bus> [tentative] on iicbb5 addr 0xff
iicbus10: <Philips I2C bus> [attached!] on iicbb5 addr 0xff
info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
info: [drm] Driver supports precise vblank timestamp query.
map MSI intr 18 on cpu1
tunable drm.video.VGA-1 is not set
tunable drm.video.HDMI-A-1 is not set
tunable drm.video.DP-1 is not set
tunable drm.video.HDMI-A-2 is not set
tunable drm.video.HDMI-A-3 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.DP-3 is not set
drm0: taking over the fictitious range 0xe0000000-0xf0000000
WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))<4>WARN_ON(bitmap_empty(pt->used_ptes, GEN6_PTES))
info: [drm] GMBUS [gmbus bus dpd] timed out, falling back to bit banging on pin 5
info: [drm] GMBUS [gmbus bus dpb] timed out, falling back to bit banging on pin 4
kms console: xpixels 1280 ypixels 1024
kms console: scale-to 16x32 cols=80 rows=32
info: [drm] Initialized i915 1.6.0 20150522
drm0 [attached!] on vgapci0
kms console: xpixels 1280 ypixels 1024
kms console: scale-to 16x32 cols=80 rows=32
boot() called on cpu#2
Switching to cpu #0 for shutdown
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped

syncing disks... 3 7 
done
kthread 0xffffffe09dfe0600 syncer13 has exited
kthread 0xffffffe1d5982700 syncer5 has exited
vflush: Warning, cannot destroy busy device vnode
unmount of filesystem mounted from devfs failed (BUSY)
unmount(0xffffffe1d9a54700): Forced unmount: 0 namecache references still present
unmount(0xffffffe1d9a54700): Forced unmount: 2 mount refs still present
Copyright (c) 2003-2016 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v4.5.0.859.g7ec9f-DEVELOPMENT #0: Sat Apr 23 23:00:50 PDT 2016
    xxxxxx@:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 3300030544 Hz, i8254 clock: 1193185 Hz
CPU: Intel(R) Core(TM) i3-3225 CPU @ 3.30GHz (3300.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x359ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
  Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 16858339328 (16077 MB)
avail memory = 15906553856 (15169 MB)
lapic: divisor index 0, frequency 50000500 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 103126518, shift 5
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD858080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD861F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000CD8581A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
ACPI: FACS 0x00000000CD872080 000040
ACPI: APIC 0x00000000CD862068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000CD8620E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: ASF! 0x00000000CD862128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000CD8621D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x00000000CD862210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 0x00000000CD8629F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000CD862AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CD862B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CD862E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000CD863840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000CD8642D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <ALASKA A M I> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c18000-0xf7c183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
usbus1 on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci2
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus1: 480Mbps High Speed USB v2.0
re0: MAC address: bc:5f:f4:49:91:04
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097,0xf0a0-0xf0a3,0xf0b0-0xf0b7 mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 40006<HPCP,POD,SUD>
ahci0.1: Caps 40006<HPCP,POD,SUD>
ahci0.2: Caps 40006<HPCP,POD,SUD>
ahci0.3: Caps 40006<HPCP,POD,SUD>
ahci0.4: Caps 40006<HPCP,POD,SUD>
ahci0.5: Caps 40006<HPCP,POD,SUD>
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x1a40> at usbus2
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus2
uhub5: MTT enabled
uhub5: 7 ports with 7 removable, self powered
ugen2.4: <vendor 0x04d9> at usbus2
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
kbd2 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
ahci0.1: No device detected
ahci0.0: No device detected
ahci0.5: No device detected
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1D5831800 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0A33BBE00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE033B79A40 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 4 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O NCT6776F rev 0x33> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
device_probe_and_attach: wbsio0 attach returned 6
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
da0 at ahci0 bus 2 target 0 lun 0
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WX41E72JL513
da0: 300.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da1 at ahci0 bus 3 target 0 lun 0
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
da1: Serial Number WD-WXP1C42A2867
da1: 300.000MB/s transfers
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da2 at ahci0 bus 4 target 0 lun 0
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
da2: Serial Number WD-WMAYP5624974
da2: 300.000MB/s transfers
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
ugen2.5: <Logitech> at usbus2
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WMAYP5624974.s3d
HAMMER(ROOT) recovery check seqno=35ce849e
HAMMER(ROOT) recovery range 3000000019fcf4c0-3000000019fcf4c0
HAMMER(ROOT) recovery nexto 3000000019fcf4c0 endseqno=35ce849f
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 14276k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 272628/408942
da0s2: cannot find label (fixlabel: raw partition offset != slice offset)
da1s1: cannot find label (fixlabel: raw partition offset != slice offset)
da2s1: cannot find label (fixlabel: raw partition offset != slice offset)
boot() called on cpu#3
Switching to cpu #0 for shutdown
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped

syncing disks... 
done
vflush: Warning, cannot destroy busy device vnode
unmount of filesystem mounted from devfs failed (BUSY)
unmount(0xffffffe1d9a54700): Forced unmount: 0 namecache references still present
unmount(0xffffffe1d9a54700): Forced unmount: 2 mount refs still present
Copyright (c) 2003-2016 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v4.5.0.859.g7ec9f-DEVELOPMENT #0: Sat Apr 23 23:00:50 PDT 2016
    shasta@:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 3300015204 Hz, i8254 clock: 1193179 Hz
CPU: Intel(R) Core(TM) i3-3225 CPU @ 3.30GHz (3300.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x359ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
  Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 16858339328 (16077 MB)
avail memory = 15906553856 (15169 MB)
lapic: divisor index 0, frequency 50000483 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 103126568, shift 5
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD858080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD861F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000CD8581A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
ACPI: FACS 0x00000000CD872080 000040
ACPI: APIC 0x00000000CD862068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000CD8620E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: ASF! 0x00000000CD862128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000CD8621D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x00000000CD862210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 0x00000000CD8629F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000CD862AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CD862B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CD862E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000CD863840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000CD8642D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <ALASKA A M I> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c18000-0xf7c183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
usbus1 on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci2
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus1: 480Mbps High Speed USB v2.0
re0: MAC address: bc:5f:f4:49:91:04
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097,0xf0a0-0xf0a3,0xf0b0-0xf0b7 mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 40006<HPCP,POD,SUD>
ahci0.1: Caps 40006<HPCP,POD,SUD>
ahci0.2: Caps 40006<HPCP,POD,SUD>
ahci0.3: Caps 40006<HPCP,POD,SUD>
ahci0.4: Caps 40006<HPCP,POD,SUD>
ahci0.5: Caps 40006<HPCP,POD,SUD>
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x1a40> at usbus2
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus2
uhub5: MTT enabled
uhub5: 7 ports with 7 removable, self powered
ugen2.4: <vendor 0x04d9> at usbus2
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
kbd2 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
ahci0.0: No device detected
ahci0.1: No device detected
ahci0.5: No device detected
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1D5831800 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0A33BBE00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE033B79A40 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 4 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O NCT6776F rev 0x33> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
device_probe_and_attach: wbsio0 attach returned 6
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
da0 at ahci0 bus 2 target 0 lun 0
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WX41E72JL513
da0: 300.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da1 at ahci0 bus 3 target 0 lun 0
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
da1: Serial Number WD-WXP1C42A2867
da1: 300.000MB/s transfers
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da2 at ahci0 bus 4 target 0 lun 0
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
da2: Serial Number WD-WMAYP5624974
da2: 300.000MB/s transfers
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
ugen2.5: <Logitech> at usbus2
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WMAYP5624974.s3d
HAMMER(ROOT) recovery check seqno=35d22040
HAMMER(ROOT) recovery range 300000000102f490-300000000102f490
HAMMER(ROOT) recovery nexto 300000000102f490 endseqno=35d22041
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 14276k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 272628/408942
info: [drm] Initialized drm 1.1.0 20060810
drm0 on vgapci0
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x18) = 0xe0000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x18) = 0x10000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
info: [drm] Memory usable by graphics device = 2048M
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
info: [drm] Driver supports precise vblank timestamp query.
tunable drm.video.VGA-1 is not set
tunable drm.video.HDMI-A-1 is not set
tunable drm.video.DP-1 is not set
tunable drm.video.HDMI-A-2 is not set
tunable drm.video.HDMI-A-3 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.DP-3 is not set
drm0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] GMBUS [gmbus bus dpd] timed out, falling back to bit banging on pin 5
info: [drm] GMBUS [gmbus bus dpb] timed out, falling back to bit banging on pin 4
kms console: xpixels 1280 ypixels 1024
kms console: scale-to 16x32 cols=80 rows=32
info: [drm] Initialized i915 1.6.0 20150522
kms console: xpixels 1280 ypixels 1024
kms console: scale-to 16x32 cols=80 rows=32
pid 984 (Xorg), uid 0: exited on signal 6
pid 1002 (Xorg), uid 0: exited on signal 6
pid 1039 (Xorg), uid 0: exited on signal 6
boot() called on cpu#0
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped

syncing disks... 12 9 9 
done
vflush: Warning, cannot destroy busy device vnode
unmount of filesystem mounted from devfs failed (BUSY)
unmount(0xffffffe1d9a54700): Forced unmount: 0 namecache references still present
unmount(0xffffffe1d9a54700): Forced unmount: 2 mount refs still present
Copyright (c) 2003-2016 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v4.5.0.859.g7ec9f-DEVELOPMENT #0: Sat Apr 23 23:00:50 PDT 2016
    shasta@:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC invariant clock: 3300034432 Hz, i8254 clock: 1193186 Hz
CPU: Intel(R) Core(TM) i3-3225 CPU @ 3.30GHz (3300.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x306a9  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x359ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,AVX,F16C>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
  Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
  MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory  = 16858339328 (16077 MB)
avail memory = 15906553856 (15169 MB)
lapic: divisor index 0, frequency 50000508 Hz
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 103126427, shift 5
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CD858080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CD861F58 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000CD8581A0 009DB4 (v02 ALASKA A M I    00000022 INTL 20051117)
ACPI: FACS 0x00000000CD872080 000040
ACPI: APIC 0x00000000CD862068 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000CD8620E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: ASF! 0x00000000CD862128 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000CD8621D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x00000000CD862210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: AAFT 0x00000000CD8629F8 0000EA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 0x00000000CD862AE8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CD862B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CD862E90 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000CD863840 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: BGRT 0x00000000CD8642D8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <ALASKA A M I> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c18000-0xf7c183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus0: 5.0Gbps Super Speed USB v3.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
usbus1 on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci2
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus1: 480Mbps High Speed USB v2.0
re0: MAC address: bc:5f:f4:49:91:04
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf080-0xf083,0xf090-0xf097,0xf0a0-0xf0a3,0xf0b0-0xf0b7 mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 40006<HPCP,POD,SUD>
ahci0.1: Caps 40006<HPCP,POD,SUD>
ahci0.2: Caps 40006<HPCP,POD,SUD>
ahci0.3: Caps 40006<HPCP,POD,SUD>
ahci0.4: Caps 40006<HPCP,POD,SUD>
ahci0.5: Caps 40006<HPCP,POD,SUD>
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen2.3: <vendor 0x1a40> at usbus2
uhub5: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus2
uhub5: MTT enabled
uhub5: 7 ports with 7 removable, self powered
ugen2.4: <vendor 0x04d9> at usbus2
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
kbd2 at ukbd0
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus2
ahci0.1: No device detected
ahci0.0: No device detected
ahci0.5: No device detected
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE1D5831800 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0A33BBE00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE033B79A40 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 4 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O NCT6776F rev 0x33> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
device_probe_and_attach: wbsio0 attach returned 6
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
da0 at ahci0 bus 2 target 0 lun 0
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device 
da0: Serial Number WD-WX41E72JL513
da0: 300.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da1 at ahci0 bus 3 target 0 lun 0
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device 
da1: Serial Number WD-WXP1C42A2867
da1: 300.000MB/s transfers
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
da2 at ahci0 bus 4 target 0 lun 0
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device 
da2: Serial Number WD-WMAYP5624974
da2: 300.000MB/s transfers
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
ugen2.5: <Logitech> at usbus2
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WMAYP5624974.s3d
HAMMER(ROOT) recovery check seqno=35d23a33
HAMMER(ROOT) recovery range 30000000012a4a98-30000000012a4a98
HAMMER(ROOT) recovery nexto 30000000012a4a98 endseqno=35d23a34
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 14276k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 272628/408942
info: [drm] Initialized drm 1.1.0 20060810
drm0 on vgapci0
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x18) = 0xe0000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x18) = 0x10000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_start(0x162, 0x10) = 0xf7800000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x162, 0x10) = 0x400000
info: [drm] Memory usable by graphics device = 2048M
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
info: [drm] Driver supports precise vblank timestamp query.
tunable drm.video.VGA-1 is not set
tunable drm.video.HDMI-A-1 is not set
tunable drm.video.DP-1 is not set
tunable drm.video.HDMI-A-2 is not set
tunable drm.video.HDMI-A-3 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.DP-3 is not set
drm0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] GMBUS [gmbus bus dpd] timed out, falling back to bit banging on pin 5
info: [drm] GMBUS [gmbus bus dpb] timed out, falling back to bit banging on pin 4
kms console: xpixels 1280 ypixels 1024
kms console: scale-to 16x32 cols=80 rows=32
info: [drm] Initialized i915 1.6.0 20150522
pid 1100 (firefox), uid 1001: exited on signal 11 (core dumped)
error: [drm:pid996:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A