Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.4.0-RELEASE #0: Thu Jan 26 09:56:41 CST 2006
    root@robin.christeson.net:/usr/obj/usr/src/sys/ROBIN
TSC clock: 400950493 Hz, i8254 clock: 1193305 Hz
CPU: AMD-K6(tm) 3D+ Processor (400.95-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x591  Stepping = 1
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 402587648 (393152K bytes)
avail memory = 383283200 (374300K bytes)
Preloaded elf kernel "/kernel" at 0xc0423000.
Preloaded elf module "/modules/acpi.ko" at 0xc04231e8.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
    ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc1402488), AE_AML_BUFFER_LIMIT
    ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc1402488), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_BUFFER_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_button0: <Power Button> on acpi0
compare 0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 15
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
sym0: <895> port 0xd800-0xd8ff mem 0xed001000-0xed001fff,0xed004000-0xed0040ff irq 10 at device 9.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
pci0: <unknown card> (vendor=0x4005, dev=0x4000) at 10.0 irq 5
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe000-0xe0ff mem 0xed000000-0xed000fff irq 9 at device 11.0 on pci0
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: MAC address: 00:02:e3:12:c9:63
sym1: <875> port 0xe400-0xe4ff mem 0xed003000-0xed003fff,0xed002000-0xed0020ff irq 5 at device 12.0 on pci0
sym1: Tekram NVRAM, ID 7, Fast-20, SE, NO parity
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 19458MB <ST320420A> [39535/16/63] at ata0-master UDMA66
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 1 lun 0
da0: <IBM DRVS09D 0100> Fixed Direct Access SCSI-3 device 
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8754MB (17928698 512 byte sectors: 255H 63S/T 1116C)
WARNING: #da/0x20000 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20003 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20004 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20005 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20006 si_iosize_max=0, using DFLTPHYS.
pflog0: promiscuous mode enabled
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-R   PX-R820T 1.57> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at sym0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device 
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <MicroAdv QuickiDrive64M 2.00> Removable Direct Access SCSI-2 device 
da1: 1.000MB/s transfers
da1: 62MB (128000 512 byte sectors: 64H 32S/T 62C)