Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Tue Jul 29 10:59:07 CEST 2008
    mneumann@nunus.localnet:/usr/src/sys/compile/GENERIC
TSC clock: 2194474370 Hz, i8254 clock: 1193168 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (2194.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,XTPR,RSVD15>
real memory  = 3212509184 (3137216K bytes)
avail memory = 3108274176 (3035424K bytes)
Preloaded elf kernel "/kernel" at 0xc079b000.
Preloaded elf module "/modules/acpi.ko" at 0xc079b328.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
ACPI: RSDP @ 0x0xf7150/0x0024 (v  2 HP    )
ACPI: XSDT @ 0x0xbf7c81d0/0x008C (v  1 HPQOEM SLIC-MPC 0x00000001 HP   0x00000001)
ACPI: FACP @ 0x0xbf7c8084/0x00F4 (v  4 HP     30C0     0x00000003 HP   0x00000001)
ACPI: DSDT @ 0x0xbf7c84e4/0x1313E (v  1 HP       nc75xx 0x00010000 MSFT 0x03000001)
ACPI: FACS @ 0x0xbf7e7d80/0x0040
ACPI: SLIC @ 0x0xbf7c825c/0x0176 (v  1 HPQOEM SLIC-MPC 0x00000001 HP   0x00000001)
ACPI: HPET @ 0x0xbf7c83d4/0x0038 (v  1 HP     30C0     0x00000001 HP   0x00000001)
ACPI: APIC @ 0x0xbf7c840c/0x0068 (v  1 HP     30C0     0x00000001 HP   0x00000001)
ACPI: MCFG @ 0x0xbf7c8474/0x003C (v  1 HP     30C0     0x00000001 HP   0x00000001)
ACPI: TCPA @ 0x0xbf7c84b0/0x0032 (v  2 HP     30C0     0x00000001 HP   0x00000001)
ACPI: SSDT @ 0x0xbf7db622/0x0059 (v  1 HP       HPQNLP 0x00000001 MSFT 0x03000001)
ACPI: SSDT @ 0x0xbf7db67b/0x0328 (v  1 HP       HPQSAT 0x00000001 MSFT 0x03000001)
ACPI: SSDT @ 0x0xbf7db9a3/0x017D (v  1 HP       HPQMRM 0x00000001 MSFT 0x03000001)
ACPI: SSDT @ 0x0xbf7dbb20/0x027F (v  1 HP      Cpu0Ist 0x00003000 INTL 0x20060317)
ACPI: SSDT @ 0x0xbf7dbd9f/0x05FA (v  1 HP      Cpu0Cst 0x00003001 INTL 0x20060317)
ACPI: SSDT @ 0x0xbf7dc399/0x025F (v  1 HP      Cpu0Tst 0x00003000 INTL 0x20060317)
ACPI: SSDT @ 0x0xbf7dc5f8/0x04D7 (v  1 HP        CpuPm 0x00003000 INTL 0x20060317)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x66,0x62 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz3: _CRT value is absurd, ignored (256.0C)
acpi_tz4: <Thermal Zone> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
isab0: <ACPI Generic ISA bridge> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel GM965 SVGA controller> port 0x4000-0x4007 mem 0xd0000000-0xdfffffff,0xe4200000-0xe42fffff irq 10 at device 2.0 on pci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <unknown card> (vendor=0x8086, dev=0x2a03) at 2.1
uhci0: <UHCI (generic) USB controller> port 0x4020-0x403f irq 10 at device 26.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x4040-0x405f irq 10 at device 26.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 26.7 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> irq 10 at device 28.0 on pci0
pci8: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=2843)> irq 11 at device 28.2 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0009)
pci24: <PCI bus> on pcib2
bge0: <Broadcom BCM5787M Gigabit Ethernet> mem 0xe4000000-0xe400ffff irq 11 at device 0.0 on pci24
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0xb0020000; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5787 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:1a:4b:73:f3:9a
pcib3: <PCI to PCI bridge (vendor=8086 device=2847)> irq 10 at device 28.4 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0009)
pci40: <PCI bus> on pcib3
uhci2: <UHCI (generic) USB controller> port 0x4060-0x407f irq 10 at device 29.0 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x4080-0x409f irq 10 at device 29.1 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x40a0-0x40bf irq 11 at device 29.2 on pci0
usb4: <UHCI (generic) USB controller> on uhci4
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4100000-0xe4100fff irq 5 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab1: <PCI to ISA bridge (vendor=8086 device=2815)> at device 31.0 on pci0
isa0: <ISA bus> on isab1
atapci0: <Intel ATA controller> port 0x40c0-0x40cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 10 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/HH18> at ata0-master PIO4
ata1: <ATA channel 1> on atapci0
atapci1: <Intel AHCI controller> port 0x4100-0x411f,0x1574-0x1577,0x1370-0x1377,0x15f4-0x15f7,0x13f0-0x13f7 mem 0xe4409000-0xe44097ff irq 10 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
intr 10 at 40001/40000 hz, livelocked limit engaged!
ata2: executing CLO failed
ad4: 114473MB <Hitachi HTS541612J9SA00 SBDOC7BP> at ata2-master SATA150
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata4: <ATA channel 2> on atapci1
ata4: port not implemented
orm0: <Option ROM> at iomem 0xd0000-0xd0fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
intr 10 at 22/20000 hz, livelock removed
Mounting root from hammer:ad4s1d
cd0 at ata0 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D HH18> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed