Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.4.1-RELEASE #7: Wed Sep 30 18:16:27 PDT 2009
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src-misc/sys/AMD64_GENERIC
Calibrating clock(s) ... TSC clock: 2399966568 Hz, i8254 clock: 1193190 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2399.96-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
real memory  = 9395240960 (9175040K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009afff, 630784 bytes (154 pages)
0x00f36000 - 0xcffaffff, 3473383424 bytes (847994 pages)
0x100000000 - 0x22ffeffff, 5100208128 bytes (1245168 pages)
avail memory = 8110809088 (7920712K bytes)
Preloaded elf kernel "/kernel" at 0xffffffff80f08000.
Preloaded elf obj module "/modules/acpi.ko" at 0xffffffff80f08290.
crypto: <crypto core>
wlan: <802.11 Link Layer>
kbd0 at kbdmux0
fildesc_drvinit() building stdin, stdout, stderr: 
md0: Malloc disk
ACPI: RSDP 0xfc430 00014 (v0 HPQOEM)
ACPI: RSDT 0xcffb0000 00044 (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: FACP 0xcffb0200 00084 (v2 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: DSDT 0xcffb0440 04E7B (v1 HPQOEM SLIC-CPC 00000000 INTL 20051117)
ACPI: FACS 0xcffbe000 00040
ACPI: APIC 0xcffb0390 0006C (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: MCFG 0xcffb0400 0003C (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: OEMB 0xcffbe040 00071 (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: HPET 0xcffb52c0 00038 (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: GSCI 0xcffbe0c0 02024 (v1 HPQOEM SLIC-CPC 20071231 MSFT 00000097)
ACPI: SLIC 0xcffc00f0 00176 (v1 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: SSDT 0xcffc14b0 0082F (v1 HPQOEM SLIC-CPC 00000012 INTL 20051117)
acpi0.nexus0.root0
acpi0: <HPQOEM SLIC-CPC> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=29c08086)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks BAD  min = 3, max = 6, width = 3
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
cpu_cst0.cpu0.acpi0.nexus0.root0
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
ACPI: SSDT 0xcffc0270 00277 (v1 HPQOEM SLIC-CPC 00000011 INTL 20051117)
cpu_cst0: switching to generic Cx mode
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
cpu_pst0.cpu0.acpi0.nexus0.root0
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
cpu_pst0: Unsupported _PSD NumProcessors (4)
device_probe_and_attach: cpu_pst0 attach returned 6
cpu0: <ACPI CPU> [attached!] on acpi0
unknown: not probed (disabled)
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <HPQOEM SLIC-CPC> [attached!] at irq 9 on motherboard
pcib0.legacy0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x29c0, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x29c1, revid=0x02
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00002580
found->	vendor=0x8086, dev=0x2937, revid=0x02
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xa400, size  5, enabled
found->	vendor=0x8086, dev=0x2938, revid=0x02
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0xa480, size  5, enabled
found->	vendor=0x8086, dev=0x293c, revid=0x02
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf9cfec00, size 10, enabled
found->	vendor=0x8086, dev=0x293e, revid=0x02
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0091
	map[10]: type Memory, range 64, base 0xf9cf4000, size 14, enabled
found->	vendor=0x8086, dev=0x2940, revid=0x02
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found->	vendor=0x8086, dev=0x2942, revid=0x02
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found->	vendor=0x8086, dev=0x2944, revid=0x02
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000560[HOTPLUG]
found->	vendor=0x8086, dev=0x2934, revid=0x02
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	map[20]: type I/O Port, range 32, base 0xa800, size  5, enabled
found->	vendor=0x8086, dev=0x2935, revid=0x02
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=15
	map[20]: type I/O Port, range 32, base 0xa880, size  5, enabled
found->	vendor=0x8086, dev=0x2936, revid=0x02
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[20]: type I/O Port, range 32, base 0xac00, size  5, enabled
found->	vendor=0x8086, dev=0x2939, revid=0x02
	domain=0, bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[20]: type I/O Port, range 32, base 0xb000, size  5, enabled
found->	vendor=0x8086, dev=0x293a, revid=0x02
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf9cff800, size 10, enabled
found->	vendor=0x8086, dev=0x244e, revid=0x92
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2916, revid=0x02
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2822, revid=0x02
	domain=0, bus=0, slot=31, func=2
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=15
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xb880, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xb800, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xb480, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xb400, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xb080, size  5, enabled
	map[24]: type Memory, range 32, base 0xf9cff000, size 11, enabled
found->	vendor=0x8086, dev=0x2930, revid=0x02
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 64, base 0xf9cffc00, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <PCI-PCI bridge> [tentative] irq 11 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     5
pcib1:   subordinate bus   5
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xfa000000-0xfeafffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci5.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib1
pci5: domain=0, physical bus=5
found->	vendor=0x10de, dev=0x0422, revid=0xa1
	domain=0, bus=5, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib1: requested memory range 0xfd000000-0xfdffffff: good
	map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[1c]: type Memory, range 64, base 0xfa000000, size 25, enabled
pcib1: requested memory range 0xfa000000-0xfbffffff: good
	map[24]: type I/O Port, range 32, base 0xdc00, size  7, enabled
pcib1: requested I/O range 0xdc00-0xdc7f: in range
vgapci0.pci5.pcib1.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0xdc00-0xdc7f mem 0xfa000000-0xfbffffff,0xd0000000-0xdfffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci5
vgapci0: <VGA-compatible display> [attached!] port 0xdc00-0xdc7f mem 0xfa000000-0xfbffffff,0xd0000000-0xdfffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci5
pci5: <PCI bus> [attached!] on pcib1
pcib1: <PCI-PCI bridge> [attached!] irq 11 at device 1.0 on pci0
uhci0.pci0.pcib0.legacy0.nexus0.root0
uhci0: <Intel 82801I (ICH9) USB controller> [tentative] port 0xa400-0xa41f irq 11 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa400
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <Intel 82801I (ICH9) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82801I (ICH9) USB controller> [attached!] on uhci0
uhci0: <Intel 82801I (ICH9) USB controller> [attached!] port 0xa400-0xa41f irq 11 at device 26.0 on pci0
uhci1.pci0.pcib0.legacy0.nexus0.root0
uhci1: <Intel 82801I (ICH9) USB controller> [tentative] port 0xa480-0xa49f irq 7 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa480
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <Intel 82801I (ICH9) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <Intel 82801I (ICH9) USB controller> [attached!] on uhci1
uhci1: <Intel 82801I (ICH9) USB controller> [attached!] port 0xa480-0xa49f irq 7 at device 26.1 on pci0
pci0: <serial bus, USB> (vendor 0x8086, dev 0x293c) at device 26.7 irq 10
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x293e) at device 27.0 irq 3
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <PCI-PCI bridge> [tentative] irq 5 at device 28.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci4.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib2
pci4: domain=0, physical bus=4
pci4: <PCI bus> [attached!] on pcib2
pcib2: <PCI-PCI bridge> [attached!] irq 5 at device 28.0 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <PCI-PCI bridge> [tentative] irq 11 at device 28.1 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   memory decode     0xf9e00000-0xf9ffffff
pcib3:   no prefetched decode
pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x14f1, dev=0x8880, revid=0x0f
	domain=0, bus=3, slot=0, func=0
	class=04-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 64, base 0xf9e00000, size 21, enabled
pcib3: requested memory range 0xf9e00000-0xf9ffffff: good
pci3: <multimedia, video> (vendor 0x14f1, dev 0x8880) at device 0.0 irq 5
pci3: <PCI bus> [attached!] on pcib3
pcib3: <PCI-PCI bridge> [attached!] irq 11 at device 28.1 on pci0
pcib4.pci0.pcib0.legacy0.nexus0.root0
pcib4: <PCI-PCI bridge> [tentative] irq 10 at device 28.2 on pci0
pcib4:   domain            0
pcib4:   secondary bus     2
pcib4:   subordinate bus   2
pcib4:   I/O decode        0xe000-0xefff
pcib4:   memory decode     0xfeb00000-0xfebfffff
pcib4:   prefetched decode 0xf8f00000-0xf8ffffff
pci2.pcib4.pci0.pcib0.legacy0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib4
pci2: domain=0, physical bus=2
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	PCI Express ver.1 cap=0x0201[DEVICE]
	map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib4: requested I/O range 0xe800-0xe8ff: in range
	map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled
pcib4: requested memory range 0xfebff000-0xfebfffff: good
	map[20]: type Prefetchable Memory, range 64, base 0xf8ff0000, size 16, enabled
pcib4: requested memory range 0xf8ff0000-0xf8ffffff: good
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
re0.pci2.pcib4.pci0.pcib0.legacy0.nexus0.root0
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0xe800-0xe8ff mem 0xf8ff0000-0xf8ffffff,0xfebff000-0xfebfffff irq 10 at device 0.0 on pci2
pcib4: re0 requested I/O range 0xe800-0xe8ff: in range
re0: Hardware rev. 0x3c000000; MAC ver. 0x25; PCI-E 125MHz
miibus0.re0.pci2.pcib4.pci0.pcib0.legacy0.nexus0.root0
miibus0: <MII bus> [tentative] on re0
rgephy0: rev: 2
rgephy0.miibus0.re0.pci2.pcib4.pci0.pcib0.legacy0.nexus0.root0
rgephy0: <8211B/RTL8169S/8110S media interface> [tentative] on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
rgephy0: <8211B/RTL8169S/8110S media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on re0
re0: bpf attached
re0: MAC address: 00:1e:8c:97:ae:15
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0xe800-0xe8ff mem 0xf8ff0000-0xf8ffffff,0xfebff000-0xfebfffff irq 10 at device 0.0 on pci2
pci2: <PCI bus> [attached!] on pcib4
pcib4: <PCI-PCI bridge> [attached!] irq 10 at device 28.2 on pci0
uhci2.pci0.pcib0.legacy0.nexus0.root0
uhci2: <Intel 82801I (ICH9) USB controller> [tentative] port 0xa800-0xa81f irq 14 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
usb2: <Intel 82801I (ICH9) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <Intel 82801I (ICH9) USB controller> [attached!] on uhci2
uhci2: <Intel 82801I (ICH9) USB controller> [attached!] port 0xa800-0xa81f irq 14 at device 29.0 on pci0
uhci3.pci0.pcib0.legacy0.nexus0.root0
uhci3: <Intel 82801I (ICH9) USB controller> [tentative] port 0xa880-0xa89f irq 15 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa880
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
usb3: <Intel 82801I (ICH9) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <Intel 82801I (ICH9) USB controller> [attached!] on uhci3
uhci3: <Intel 82801I (ICH9) USB controller> [attached!] port 0xa880-0xa89f irq 15 at device 29.1 on pci0
uhci4.pci0.pcib0.legacy0.nexus0.root0
uhci4: <Intel 82801I (ICH9) USB controller> [tentative] port 0xac00-0xac1f irq 10 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xac00
usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
usb4: <Intel 82801I (ICH9) USB controller> [tentative] on uhci4
usb4: USB revision 1.0
uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb4
uhub4: 2 ports with 2 removable, self powered
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb4
usb4: <Intel 82801I (ICH9) USB controller> [attached!] on uhci4
uhci4: <Intel 82801I (ICH9) USB controller> [attached!] port 0xac00-0xac1f irq 10 at device 29.2 on pci0
uhci5.pci0.pcib0.legacy0.nexus0.root0
uhci5: <Intel 82801I (ICH9) USB controller> [tentative] port 0xb000-0xb01f irq 11 at device 29.3 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
usb5: <Intel 82801I (ICH9) USB controller> [tentative] on uhci5
usb5: USB revision 1.0
uhub5.usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb5
uhub5: 2 ports with 2 removable, self powered
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb5
usb5: <Intel 82801I (ICH9) USB controller> [attached!] on uhci5
uhci5: <Intel 82801I (ICH9) USB controller> [attached!] port 0xb000-0xb01f irq 11 at device 29.3 on pci0
pci0: <serial bus, USB> (vendor 0x8086, dev 0x293a) at device 29.7 irq 14
pcib5.pci0.pcib0.legacy0.nexus0.root0
pcib5: <PCI-PCI bridge> [tentative] at device 30.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     1
pcib5:   subordinate bus   1
pcib5:   I/O decode        0xc000-0xcfff
pcib5:   memory decode     0xf9d00000-0xf9dfffff
pcib5:   no prefetched decode
pcib5:   Subtractively decoded bridge.
pci1.pcib5.pci0.pcib0.legacy0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib5
pci1: domain=0, physical bus=1
found->	vendor=0x14f1, dev=0x2f20, revid=0x00
	domain=0, bus=1, slot=0, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf9de0000, size 16, enabled
pcib5: requested memory range 0xf9de0000-0xf9deffff: good
	map[14]: type I/O Port, range 32, base 0xcc00, size  3, enabled
pcib5: requested I/O range 0xcc00-0xcc07: in range
found->	vendor=0x11c1, dev=0x5811, revid=0x70
	domain=0, bus=1, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=4
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf9dff000, size 12, enabled
pcib5: requested memory range 0xf9dff000-0xf9dfffff: good
pci1: <simple comms> (vendor 0x14f1, dev 0x2f20) at device 0.0 irq 5
fwohci0.pci1.pcib5.pci0.pcib0.legacy0.nexus0.root0
fwohci0: <Lucent FW322/323> [tentative] mem 0xf9dff000-0xf9dfffff irq 4 at device 5.0 on pci1
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf9dff000
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:1e:8c:00:00:20:69:1f
fwohci0: resetting OHCI...done (loop=0)
fwohci0: phy read failed(1).
fwohci0: fwphy_rddata: 0x2 loop=1, retry=1
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
fwohci0: BUS_OPT 0x9002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0.fwohci0.pci1.pcib5.pci0.pcib0.legacy0.nexus0.root0
firewire0: <IEEE1394(FireWire) bus> [tentative] on fwohci0
fwe0.firewire0.fwohci0.pci1.pcib5.pci0.pcib0.legacy0.nexus0.root0
fwe0: <Ethernet over FireWire> [tentative] on firewire0
fwe0: bpf attached
fwe0: MAC address: 02:1e:8c:20:69:1f
fwe0: <Ethernet over FireWire> [attached!] on firewire0
sbp0.firewire0.fwohci0.pci1.pcib5.pci0.pcib0.legacy0.nexus0.root0
sbp0: <SBP-2/SCSI over FireWire> [tentative] on firewire0
sbp_attach (cold=1)
sbp0: <SBP-2/SCSI over FireWire> [attached!] on firewire0
sbp_post_busreset
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
Current DB 0
ch = 0
 Current OP   KEY INT BR   len     Addr   Depend Stat: Cnt
014e7000 OUTL ST2 ALL ALL    12 00000000 014e7080 8411:0007 RUN,ACTIVE, ack complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
firewire0: <IEEE1394(FireWire) bus> [attached!] on fwohci0
fwohci0: <Lucent FW322/323> [attached!] mem 0xf9dff000-0xf9dfffff irq 4 at device 5.0 on pci1
pci1: <PCI bus> [attached!] on pcib5
pcib5: <PCI-PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <Intel ICH8 SATA300 controller> [tentative] port 0xb080-0xb09f,0xb400-0xb403,0xb480-0xb487,0xb800-0xb803,0xb880-0xb887 mem 0xf9cff000-0xf9cff7ff irq 15 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf9cff000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci0
intr 15 at 40001/40000 hz, livelocked limit engaged!
ata2: executing CLO failed
ata2: SATA connect time=0ms
ata2: ahci_reset devices=0x1<ATA_MASTER>
intr 15 at 40001/20000 hz, in livelock
bus_explore done
sbp_post_explore
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
umass0.uhub4.usb4.uhci4.pci0.pcib0.legacy0.nexus0.root0
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> [tentative] on uhub4
umass1.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
umass1: <OEM Mass Storage Plus, class 0/0, rev 2.00/0.00, addr 2> [tentative] on uhub2
umass0:1:0:-1: Attached to scbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> [attached!] on uhub4
umass1:2:1:-1: Attached to scbus2
umass1: <OEM Mass Storage Plus, class 0/0, rev 2.00/0.00, addr 2> [attached!] on uhub2
uhid0.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhid0: <OEM Mass Storage Plus, class 0/0, rev 2.00/0.00, addr 2> [tentative] on uhub2
uhid0: <OEM Mass Storage Plus, class 0/0, rev 2.00/0.00, addr 2> [attached!] on uhub2
ums0.uhub5.usb5.uhci5.pci0.pcib0.legacy0.nexus0.root0
ums0: <Logitech Trackball, class 0/0, rev 1.10/2.20, addr 2> [tentative] on uhub5
ums0: 3 buttons and Z dir.
ums0: <Logitech Trackball, class 0/0, rev 1.10/2.20, addr 2> [attached!] on uhub5
ad4: Intel check1 failed
intr 15 at 14/20000 hz, livelock removed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 476940MB <Seagate ST3500630AS 3.CHN> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci0
ata3.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci0
intr 15 at 40001/40000 hz, livelocked limit engaged!
ata3: executing CLO failed
ata3: SATA connect time=0ms
ata3: ahci_reset devices=0x1<ATA_MASTER>
uhub6.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhub6: <Microsoft Microsoft\M-. USB Hub, class 9/0, rev 2.00/1.00, addr 3> [tentative] on uhub2
uhub6: 3 ports with 0 removable, self powered
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: type 0x7, start 63, end = 956606489, size 956606427 : OK
ad4: type 0x7, start 956606490, end = 976768064, size 20161575 : OK
uhub6: <Microsoft Microsoft\M-. USB Hub, class 9/0, rev 2.00/1.00, addr 3> [attached!] on uhub2
intr 15 at 40004/20000 hz, in livelock
intr 15 at 7/20000 hz, livelock removed
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ad6: 953869MB <Seagate ST31000333AS SD35> at ata3-master SATA300
ad6: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata3: <ATA channel 1> [attached!] on atapci0
ata4.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci0
intr 15 at 40001/40000 hz, livelocked limit engaged!
ata4: executing CLO failed
ata4: SATA connect time=0ms
ata4: ahci_reset devices=0x4<ATAPI_MASTER>
intr 15 at 40001/20000 hz, in livelock
ukbd0.uhub6.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
ukbd0: <Microsoft Microsoft\M-. Wireless Entertainment Keyboard 7000, class 0/0, rev 2.00/1.00, addr 4> [tentative] on uhub6
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x350000
ukbd0: <Microsoft Microsoft\M-. Wireless Entertainment Keyboard 7000, class 0/0, rev 2.00/1.00, addr 4> [attached!] on uhub6
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad6: type 0xa5, start 63, end = 1953520127, size 1953520065 : OK
ata4: device_reset timeout=22810us
intr 15 at 14/20000 hz, livelock removed
acd0: <HL-DT-ST DVD-RW GSA-H60L/DC07> DVDR drive at ata4 as master
acd0: read 6890KB/s (6890KB/s) write 6891KB/s (6891KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
ata4: <ATA channel 2> [attached!] on atapci0
ata5.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata5: <ATA channel 3> [tentative] on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: <ATA channel 3> [attached!] on atapci0
ata6.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata6: <ATA channel 4> [tentative] on atapci0
ata6: SATA connect status=00000000
ata6: ahci_reset devices=0x0
ata6: <ATA channel 4> [attached!] on atapci0
ata7.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata7: <ATA channel 5> [tentative] on atapci0
ata7: SATA connect status=00000000
ata7: ahci_reset devices=0x0
ata7: <ATA channel 5> [attached!] on atapci0
atapci0: <Intel ICH8 SATA300 controller> [attached!] port 0xb080-0xb09f,0xb400-0xb403,0xb480-0xb487,0xb800-0xb803,0xb880-0xb887 mem 0xf9cff000-0xf9cff7ff irq 15 at device 31.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x2930) at device 31.3 irq 10
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] pcibus 0 on motherboard
ex_isa_identify()
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
psm0: current command byte:0065
psm0: failed to reset the aux device.
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
intr 14 at 40001/40000 hz, livelocked limit engaged!
sl0: bpf attached
faith0: bpf attached
lo0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
ppp0: bpf attached
ip: MPSAFE
arp: MPSAFE
CAM: Configuring bus: sbp0
CAM: Configuring bus: umass-sim0
CAM: Configuring bus: umass-sim1
CAM: Configuring bus: ata0
CAM: Configuring bus: ata1
CAM: Configuring bus: ata2
CAM: Configuring bus: ata3
CAM: Configuring bus: ata4
CAM: Configuring bus: ata5
CAM: Configuring 9 busses
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe1:sbp0:0:2:0): error 22
(probe1:sbp0:0:2:0): Unretryable Error
(probe1:sbp0:0:3:0): error 22
(probe1:sbp0:0:3:0): Unretryable Error
(probe1:sbp0:0:4:0): error 22
(probe1:sbp0:0:4:0): Unretryable Error
(probe1:sbp0:0:5:0): error 22
(probe1:sbp0:0:5:0): Unretryable Error
(probe1:sbp0:0:6:0): error 22
(probe1:sbp0:0:6:0): Unretryable Error
CAM: Finished configuring bus: sbp0
CAM: Finished configuring bus: ata0
CAM: Finished configuring bus: ata1
CAM: Finished configuring bus: ata3
CAM: Finished configuring bus: ata4
CAM: Finished configuring bus: ata5
(probe0:ata2:0:0:0): error 22
(probe0:ata2:0:0:0): Unretryable Error
(probe0:ata2:0:0:0): error 6
(probe0:ata2:0:0:0): Unretryable Error
(probe0:ata2:0:0:0): error 22
(probe0:ata2:0:0:0): Unretryable Error
CAM: Finished configuring bus: ata2
CAM: Finished configuring bus: umass-sim0
(probe9:umass-sim1:1:0:0): Uninitialized Transport 5:ffffffff?
CAM: Finished configuring bus: umass-sim1
CAM: finished configuring all busses (0 left)
pass8 at umass-sim0 bus 0 target 0 lun 0
pass8: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
pass8: 1.000MB/s transfers
pass9 at umass-sim0 bus 0 target 0 lun 1
pass9: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
pass9: 1.000MB/s transfers
pass10 at umass-sim0 bus 0 target 0 lun 2
pass10: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
pass10: 1.000MB/s transfers
pass11 at umass-sim0 bus 0 target 0 lun 3
pass11: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
pass11: 1.000MB/s transfers
pass12 at umass-sim1 bus 1 target 0 lun 0
pass12: <Ext Hard Disk > Fixed Direct Access SCSI-4 device 
pass12: Serial Number 
pass12: 1.000MB/s transfers
pass0 at ata2 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVD-RW GSA-H60L DC07> Removable CD-ROM SCSI-0 device 
pass0: 3.300MB/s transfers
sg8 at umass-sim0 bus 0 target 0 lun 0
sg8: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
sg8: 1.000MB/s transfers
sg9 at umass-sim0 bus 0 target 0 lun 1
sg9: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
sg9: 1.000MB/s transfers
sg10 at umass-sim0 bus 0 target 0 lun 2
sg10: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
sg10: 1.000MB/s transfers
sg11 at umass-sim0 bus 0 target 0 lun 3
sg11: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
sg11: 1.000MB/s transfers
sg12 at umass-sim1 bus 1 target 0 lun 0
sg12: <Ext Hard Disk > Fixed Direct Access SCSI-4 device 
sg12: Serial Number 
sg12: 1.000MB/s transfers
sg0 at ata2 bus 0 target 0 lun 0
sg0: <HL-DT-ST DVD-RW GSA-H60L DC07> Removable CD-ROM SCSI-0 device 
sg0: 3.300MB/s transfers
no B_DEVMAGIC (bootdev=0)
ATA PseudoRAID loaded
(cd0:ata2:0:0:0): error 6
(cd0:ata2:0:0:0): Unretryable Error
cd0 at ata2 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GSA-H60L DC07> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da8:umass-sim0:0:0:0): error 6
(da8:umass-sim0:0:0:0): Unretryable Error
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da8: 1.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
(da9:umass-sim0:0:0:1): error 6
(da9:umass-sim0:0:0:1): Unretryable Error
da9 at umass-sim0 bus 0 target 0 lun 1
da9: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da9: 1.000MB/s transfers
da9: Attempt to query device size failed: NOT READY, Medium not present
(da10:umass-sim0:0:0:2): error 6
(da10:umass-sim0:0:0:2): Unretryable Error
da10 at umass-sim0 bus 0 target 0 lun 2
da10: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da10: 1.000MB/s transfers
da10: Attempt to query device size failed: NOT READY, Medium not present
(da11:umass-sim0:0:0:3): error 6
(da11:umass-sim0:0:0:3): Unretryable Error
da11 at umass-sim0 bus 0 target 0 lun 3
da11: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da11: 1.000MB/s transfers
da11: Attempt to query device size failed: NOT READY, Medium not present
da12 at umass-sim1 bus 1 target 0 lun 0
da12: <Ext Hard Disk > Fixed Direct Access SCSI-4 device 
da12: Serial Number 
da12: 1.000MB/s transfers
da12: 305245MB (625142448 512 byte sectors: 255H 63S/T 38913C)
da12: type 0x7, start 63, end = 625137344, size 625137282 : OK
uhid1.uhub6.uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhid1: <Microsoft Microsoft\M-. Wireless Laser Mouse 8000, class 0/0, rev 2.00/1.00, addr 5> [tentative] on uhub6
uhid1: <Microsoft Microsoft\M-. Wireless Laser Mouse 8000, class 0/0, rev 2.00/1.00, addr 5> [attached!] on uhub6
intr 14 at 23/20000 hz, livelock removed
Mounting root from hammer:serno/9TE03QNJ.s1d
tryroot serno/9TE03QNJ.s1d
Mounting devfs
start_init: trying /sbin/init
re0: adjust device control 0x2010 -> 0x5010