Copyright (c) 2003-2010 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 2.8-RELEASE #4: Wed Feb 2 21:07:57 GMT 2011 root@:/usr/obj/usr/src/sys/GENERIC_SMP Calibrating clock(s) ... TSC clock: 2111012128 Hz, i8254 clock: 1193292 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2110.83-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 4294504448 (4095 MB) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x0092f000 - 0xbffcffff, 3211399168 bytes (784033 pages) avail memory = 3106213888 (2962 MB) ACPI MADT: RSDP not in EBDA ACPI MADT: RSDP in BIOS mem ACPI MADT: MADT in RSDT ACPI MADT: LAPIC address 0xfee00000, flags 0x1 lapic: at 0xfee00000 ACPI MADT: BSP apic id 0 ACPI MADT: cpu_id 0, apic_id 0 ACPI MADT: cpu_id 1, apic_id 1 lapic: divisor index 0, frequency 100515457 Hz SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x000000df SVR: 0x000001ff DragonFly/MP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x80050010 cpu1 (AP): apic id: 1, version: 0x80050010 Warning: APIC I/O disabled Finish MP startup SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010000 lint1: 0x00010400 TPR: 0x000000df SVR: 0x000001ff Active CPU Mask: 00000003 sched_ithd: stray interrupt 7 on cpu 0 bios32: Found BIOS32 Service Directory header at 0xc00fa220 bios32: Entry = 0xfa830 (c00fa830) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xa860 pnpbios: Found PnP BIOS data at 0xc00fb3f0 pnpbios: Entry = f0000:b420 Rev = 1.0 Other BIOS signatures found: objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32 Preloaded elf kernel "kernel" at 0xc0902000. Preloaded elf module "acpi.ko" at 0xc0902244. Preloaded elf module "ahci.ko" at 0xc09022e0. Preloaded elf module "ehci.ko" at 0xc090237c. module_register: module pci/ahci already exists! Module pci/ahci failed to register: 17 start dummy scheduler helpers on cpus: 0 1 start scheduler helpers on cpus: 0 1 FQ scheduler policy version 1.0 loaded wlan: <802.11 Link Layer> No policy for md0 specified, or policy not found disk scheduler: set policy of md0 to noop md0: Malloc disk kbd0 at kbdmux0 crypto: Pentium Pro MTRR support enabled md0: invalid primary partition table: no magic Math emulator present ACPI: RSDP 0xf7df0 00014 (v0 Shuttl) ACPI: RSDT 0xbfff3040 0003C (v1 Shuttl Shuttle 42302E31 AWRD 00000000) ACPI: FACP 0xbfff30c0 00074 (v1 Shuttl Shuttle 42302E31 AWRD 00000000) ACPI: DSDT 0xbfff3180 05909 (v1 XPC SN27V10 00001000 MSFT 0100000E) ACPI: FACS 0xbfff0000 00040 ACPI: SSDT 0xbfff8bc0 00206 (v1 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 0xbfff8e40 00038 (v1 Shuttl Shuttle 42302E31 AWRD 00000098) ACPI: MCFG 0xbfff8ec0 0003C (v1 Shuttl Shuttle 42302E31 AWRD 00000000) ACPI: SLIC 0xbfff8f40 00176 (v1 Shuttl Shuttle 42302E31 AWRD 00000000) ACPI: APIC 0xbfff8b00 0007C (v1 Shuttl Shuttle 42302E31 AWRD 00000000) npx0.nexus0.root0 npx0: [tentative] on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout npx0: [attached!] on motherboard cryptosoft0.nexus0.root0 cryptosoft0: [tentative] on motherboard crypto: assign cryptosoft0 driver id 0, flags 234881024 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 cryptosoft0: [attached!] on motherboard acpi0.nexus0.root0 acpi0: [tentative] on motherboard objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both pci_open(1): mode 1 addr port (0x0cf8) is 0x80000888 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=050000] [hdr=00] is there (id=036910de) pcibios: BIOS version 3.00 $PIR: checksum failed! AcpiOsDerivePciId: bus 0 dev 24 func 1 sched_ithd: stray interrupt 7 on cpu 1 AcpiOsDerivePciId: bus 0 dev 1 func 0 ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.TMR_._CRS] (Node 0xc647a7ac), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._CRS] (Node 0xc647a89c), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.RTC_._CRS] (Node 0xc647a964), AE_NOT_FOUND unknown: not probed (disabled) ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI timer looks BAD min = 5, max = 9, width = 4 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks BAD min = 5, max = 10, width = 5 ACPI timer looks BAD min = 5, max = 9, width = 4 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks BAD min = 5, max = 10, width = 5 ACPI timer looks BAD min = 5, max = 10, width = 5 sched_ithd: stray interrupt 7 on cpu 0 ACPI timer looks BAD min = 5, max = 10, width = 5 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks BAD min = 5, max = 10, width = 5 acpi_timer0.acpi0.nexus0.root0 acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1008-0x100b on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1008-0x100b on acpi0 acpi_hpet0.acpi0.nexus0.root0 acpi_hpet0: [tentative] iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x10de, rev: 0x1, num: 2, opts: legacy_route acpi_hpet0: frequency 25000000 acpi_hpet0: [attached!] iomem 0xfed00000-0xfed003ff on acpi0 unknown: not probed (disabled) sched_ithd: stray interrupt 7 on cpu 1 acpi_button0.acpi0.nexus0.root0 acpi_button0: [tentative] on acpi0 acpi_button0: [attached!] on acpi0 acpi_tz0.acpi0.nexus0.root0 acpi_tz0: [tentative] on acpi0 acpi_tz0: [attached!] on acpi0 unknown: not probed (disabled) ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND fdc0.acpi0.nexus0.root0 fdc0: [tentative] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sched_ithd: stray interrupt 7 on cpu 0 sched_ithd: stray interrupt 7 on cpu 1 sched_ithd: stray interrupt 7 on cpu 0 sched_ithd: stray interrupt 7 on cpu 0 sched_ithd: stray interrupt 7 on cpu 0 sched_ithd: 10 stray interrupts 7 on cpu 0 - there will be no further reports fdc0: FIFO enabled, 8 bytes threshold fdc0: [attached!] port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) cpu0.acpi0.nexus0.root0 cpu0: [tentative] on acpi0 cpu_cst0.cpu0.acpi0.nexus0.root0 cpu_cst0: [tentative] on cpu0 cpu_cst0: switching to generic Cx mode cpu_cst0: [attached!] on cpu0 cpu_pst0.cpu0.acpi0.nexus0.root0 cpu_pst0: [tentative] on cpu0 cpu_pst0: create domain0 cpu_pst0: control reg 127 0 cpu_pst0: status reg 127 0 cpu_pst0: freq 2100, pwr 89000, xlat 100, blat 9, cv e820230d, sv 0000030d cpu_pst0: freq 2000, pwr 81405, xlat 100, blat 9, cv e820234c, sv 0000034c cpu_pst0: freq 1800, pwr 67406, xlat 100, blat 9, cv e82023ca, sv 000003ca cpu_pst0: freq 1000, pwr 32819, xlat 100, blat 9, cv e8202482, sv 00000482 cpu_pst0: _PPC 0 cpu_pst0: [attached!] on cpu0 cpu0: [attached!] on acpi0 cpu1.acpi0.nexus0.root0 cpu1: [tentative] on acpi0 cpu_cst1.cpu1.acpi0.nexus0.root0 cpu_cst1: [tentative] on cpu1 cpu_cst1: [attached!] on cpu1 cpu_pst1.cpu1.acpi0.nexus0.root0 cpu_pst1: [tentative] on cpu1 cpu_pst1: control reg 127 0 cpu_pst1: status reg 127 0 cpu_pst1: _PPC 0 cpu_pst1: [attached!] on cpu1 cpu1: [attached!] on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND ACPI Error (psargs-0464): [HPTF] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.HPET._STA] (Node 0xc647a874), AE_NOT_FOUND unknown: not probed (disabled) unknown: not probed (disabled) acpi0: [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x60,0x64,0x62-0x63,0x65-0x6f,0x74-0x7f,0x91-0x93,0xa2-0xbf,0xe0-0xef,0x4d0-0x4d1,0x800-0x805,0x290-0x30f,0x1000-0x107f,0x1080-0x10ff,0x1400-0x147f,0x1480-0x14ff,0x1800-0x187f,0x1880-0x18ff iomem 0xd0000-0xd3fff,0xd5800-0xd7fff,0xf0000-0xfbfff,0xfc000-0xfffff,0xfed00000-0xfed003ff,0xbfff0000-0xbfffffff,0xffff0000-0xffffffff,0-0x9ffff,0x100000-0xbffeffff,0xfec00000-0xfec00fff,0xfee00000-0xfeefffff,0xfefff000-0xfeffffff,0xfff80000-0xfff80fff,0xfff90000-0xfffbffff,0xfffed000-0xfffeffff,0xf0000000-0xf3ffffff irq 9 on motherboard pcib0.legacy0.nexus0.root0 pcib0: [tentative] pcibus 0 on motherboard pci0.pcib0.legacy0.nexus0.root0 pci0: [tentative] on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x0369, revid=0xa1 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0362, revid=0xa2 domain=0, bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0368, revid=0xa2 domain=0, bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x1c00, size 6, enabled map[24]: type I/O Port, range 32, base 0x1c40, size 6, enabled found-> vendor=0x10de, dev=0x036a, revid=0xa2 domain=0, bus=0, slot=1, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x036c, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02f000, size 12, enabled found-> vendor=0x10de, dev=0x036d, revid=0xa2 domain=0, bus=0, slot=2, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe02e000, size 8, enabled found-> vendor=0x10de, dev=0x036e, revid=0xa1 domain=0, bus=0, slot=4, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0xf400, size 4, enabled found-> vendor=0x10de, dev=0x037f, revid=0xa2 domain=0, bus=0, slot=5, func=0 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9f0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbf0, size 2, enabled map[18]: type I/O Port, range 32, base 0x970, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb70, size 2, enabled map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled map[24]: type Memory, range 32, base 0xfe02d000, size 12, enabled found-> vendor=0x10de, dev=0x037f, revid=0xa2 domain=0, bus=0, slot=5, func=1 class=01-01-85, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x9e0, size 3, enabled map[14]: type I/O Port, range 32, base 0xbe0, size 2, enabled map[18]: type I/O Port, range 32, base 0x960, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb60, size 2, enabled map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled map[24]: type Memory, range 32, base 0xfe02c000, size 12, enabled found-> vendor=0x10de, dev=0x0370, revid=0xa2 domain=0, bus=0, slot=6, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x0a (2500 ns) found-> vendor=0x10de, dev=0x0371, revid=0xa2 domain=0, bus=0, slot=6, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0xfe024000, size 14, enabled found-> vendor=0x10de, dev=0x0373, revid=0xa2 domain=0, bus=0, slot=8, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 8 messages, 64 bit, vector masks MSI-X supports 8 messages in maps 0x18 and 0x1c map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled map[14]: type I/O Port, range 32, base 0xc800, size 3, enabled map[18]: type Memory, range 32, base 0xfe02a000, size 8, enabled map[1c]: type Memory, range 32, base 0xfe029000, size 4, enabled found-> vendor=0x10de, dev=0x0377, revid=0xa2 domain=0, bus=0, slot=15, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1c (7000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000000 found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: (vendor 0x10de, dev 0x0369) at device 0.0 isab0.pci0.pcib0.legacy0.nexus0.root0 isab0: [tentative] at device 1.0 on pci0 isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 isa0: [tentative] on isab0 isa0: [attached!] on isab0 isab0: [attached!] at device 1.0 on pci0 pci0: (vendor 0x10de, dev 0x0368) at device 1.1 irq 11 pci0: (vendor 0x10de, dev 0x036a) at device 1.2 ohci0.pci0.pcib0.legacy0.nexus0.root0 ohci0: [tentative] mem 0xfe02f000-0xfe02ffff irq 5 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02f000 usb0: OHCI version 1.0, legacy support usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0 usb0: [tentative] on ohci0 usb0: USB revision 1.0 uhub0.usb0.ohci0.pci0.pcib0.legacy0.nexus0.root0 uhub0: [tentative] on usb0 uhub0: 10 ports with 10 removable, self powered uhub0: [attached!] on usb0 usb0: [attached!] on ohci0 ohci0: [attached!] mem 0xfe02f000-0xfe02ffff irq 5 at device 2.0 on pci0 ehci0.pci0.pcib0.legacy0.nexus0.root0 ehci0: [tentative] mem 0xfe02e000-0xfe02e0ff irq 10 at device 2.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02e000 usb1: waiting for BIOS to give up control usb1: timed out waiting for BIOS usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1.ehci0.pci0.pcib0.legacy0.nexus0.root0 usb1: [tentative] on ehci0 usb1: USB revision 2.0 uhub1.usb1.ehci0.pci0.pcib0.legacy0.nexus0.root0 uhub1: [tentative] on usb1 uhub1: 10 ports with 10 removable, self powered uhub1: [attached!] on usb1 usb1: [attached!] on ehci0 ehci0: [attached!] mem 0xfe02e000-0xfe02e0ff irq 10 at device 2.1 on pci0 atapci0.pci0.pcib0.legacy0.nexus0.root0 atapci0: [tentative] port 0xf400-0xf40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf400 ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0 ata0: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ata0: [attached!] on atapci0 ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0 ata1: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [attached!] on atapci0 atapci0: [attached!] port 0xf400-0xf40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.0 on pci0 atapci1.pci0.pcib0.legacy0.nexus0.root0 atapci1: [tentative] port 0xe000-0xe00f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 mem 0xfe02d000-0xfe02dfff irq 10 at device 5.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02d000 ata2.atapci1.pci0.pcib0.legacy0.nexus0.root0 ata2: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0 ata2: SATA connect status=00000000 ata2: [attached!] on atapci1 ata3.atapci1.pci0.pcib0.legacy0.nexus0.root0 ata3: [tentative] on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70 ata3: SATA connect status=00000000 ata3: [attached!] on atapci1 atapci1: [attached!] port 0xe000-0xe00f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 mem 0xfe02d000-0xfe02dfff irq 10 at device 5.0 on pci0 atapci2.pci0.pcib0.legacy0.nexus0.root0 atapci2: [tentative] port 0xcc00-0xcc0f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 mem 0xfe02c000-0xfe02cfff irq 11 at device 5.1 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfe02c000 ata4.atapci2.pci0.pcib0.legacy0.nexus0.root0 ata4: [tentative] on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata4: SATA connect time=0ms ata4: reset tp1 mask=01 ostat0=50 ostat1=00 ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire No policy for ad8 specified, or policy not found disk scheduler: set policy of ad8 to noop ad8: nVidia check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ad8: 238475MB at ata4-master SATA150 ad8: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ata4: [attached!] on atapci2 ata5.atapci2.pci0.pcib0.legacy0.nexus0.root0 ata5: [tentative] on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata5: SATA connect status=00000000 ata5: [attached!] on atapci2 atapci2: [attached!] port 0xcc00-0xcc0f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 mem 0xfe02c000-0xfe02cfff irq 11 at device 5.1 on pci0 pcib1.pci0.pcib0.legacy0.nexus0.root0 pcib1: [tentative] at device 6.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfde00000-0xfdefffff pcib1: prefetched decode 0xfdd00000-0xfddfffff pcib1: Subtractively decoded bridge. pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 pci1: [tentative] on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1106, dev=0x3044, revid=0x80 domain=0, bus=1, slot=8, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdeff000, size 11, enabled pcib1: requested memory range 0xfdeff000-0xfdeff7ff: good map[14]: type I/O Port, range 32, base 0xbc00, size 7, enabled pcib1: requested I/O range 0xbc00-0xbc7f: in range fwohci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 fwohci0: [tentative] port 0xbc00-0xbc7f mem 0xfdeff000-0xfdeff7ff irq 11 at device 8.0 on pci1 fwohci0: latency timer 0 -> 32. fwohci0: cache size 16 -> 16. fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdeff000 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:00:30:1b:43:fd:f3 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202 fwohci0: fwohci_set_intr: 1 firewire0.fwohci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 firewire0: [tentative] on fwohci0 fwe0.firewire0.fwohci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 fwe0: [tentative] on firewire0 fwe0: bpf attached fwe0: MAC address: 02:00:00:43:fd:f3 fwe0: [attached!] on firewire0 sbp0.firewire0.fwohci0.pci1.pcib1.pci0.pcib0.legacy0.nexus0.root0 sbp0: [tentative] on firewire0 sbp_attach (cold=1) sbp0: [attached!] on firewire0 sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 firewire0: [attached!] on fwohci0 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 fwohci0: [attached!] port 0xbc00-0xbc7f mem 0xfdeff000-0xfdeff7ff irq 11 at device 8.0 on pci1 pci1: [attached!] on pcib1 pcib1: [attached!] at device 6.0 on pci0 pci0: (vendor 0x10de, dev 0x0371) at device 6.1 irq 11 nfe0.pci0.pcib0.legacy0.nexus0.root0 nfe0: [tentative] port 0xc800-0xc807 mem 0xfe029000-0xfe02900f,0xfe02a000-0xfe02a0ff,0xfe02b000-0xfe02bfff irq 10 at device 8.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 miibus0.nfe0.pci0.pcib0.legacy0.nexus0.root0 miibus0: [tentative] on nfe0 e1000phy0.miibus0.nfe0.pci0.pcib0.legacy0.nexus0.root0 e1000phy0: [tentative] on miibus0 e1000phy0: 1000baseT-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX, auto e1000phy0: [attached!] on miibus0 miibus0: [attached!] on nfe0 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt b9077000 OUTL ST2 ALL ALL 12 00000000 b9077080 8411:0008 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 nfe0: bpf attached nfe0: MAC address: 00:30:1b:43:fc:b0 nfe0: [attached!] port 0xc800-0xc807 mem 0xfe029000-0xfe02900f,0xfe02a000-0xfe02a0ff,0xfe02b000-0xfe02bfff irq 10 at device 8.0 on pci0 pcib2.pci0.pcib0.legacy0.nexus0.root0 pcib2: [tentative] at device 15.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xa000-0xafff pcib2: memory decode 0xf8000000-0xfbffffff pcib2: prefetched decode 0xe0000000-0xefffffff pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0 pci2: [tentative] on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x10de, dev=0x0422, revid=0xa1 domain=0, bus=2, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit PCI Express ver.1 cap=0x0001[DEVICE] map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib2: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib2: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled pcib2: requested memory range 0xf8000000-0xf9ffffff: good map[24]: type I/O Port, range 32, base 0xac00, size 7, enabled pcib2: requested I/O range 0xac00-0xac7f: in range vgapci0.pci2.pcib2.pci0.pcib0.legacy0.nexus0.root0 vgapci0: [tentative] port 0xac00-0xac7f mem 0xf8000000-0xf9ffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 5 at device 0.0 on pci2 vgapci0: [attached!] port 0xac00-0xac7f mem 0xf8000000-0xf9ffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 5 at device 0.0 on pci2 pci2: [attached!] on pcib2 pcib2: [attached!] at device 15.0 on pci0 pci0: [attached!] on pcib0 pcib0: [attached!] pcibus 0 on motherboard ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed fdc-: fdc0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 aps_identify: will specify the port ex_isa_identify() isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0 orm0: