Copyright (c) 2003-2010 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.5.1.540.g05ee71-DEVELOPMENT #0: Fri Jan  8 06:56:36 UTC 2010
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC
TSC clock: 3000128078 Hz, i8254 clock: 1193190 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
  AMD Features=0x20000800<SYSCALL,LM>
  Logical CPUs per core: 2
real memory  = 9059692544 (8847356K bytes)
avail memory = 8058957824 (7870076K bytes)
md0: Malloc disk
kbd1 at kbdmux0
ACPI: RSDP 0xf4f20 00024 (v2 HP    )
ACPI: XSDT 0xdfff32c0 00044 (v1 HP     P52      00000002   \M-R\^D 0000162E)
ACPI: FACP 0xdfff3340 000F4 (v3 HP     P52      00000002   \M-R\^D 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 20090521 tbfadt-707
ACPI: DSDT 0xdfff3440 018FE (v1 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 0xdfff3100 00040
ACPI: SPCR 0xdfff3140 00050 (v1 HP     SPCRRBSU 00000001   \M-R\^D 0000162E)
ACPI: MCFG 0xdfff31c0 0003C (v1 HP     ProLiant 00000001      00000000)
ACPI: APIC 0xdfff3200 000B6 (v1 HP     00000083 00000002      00000000)
cryptosoft0: <software crypto> on motherboard
acpi0: <HP P52> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
isab0: <ACPI Generic ISA bridge> port 0x280-0x29f,0x220-0x25f,0x4e-0x4f,0x2e-0x2f on acpi0
isa0: <ISA bus> on isab0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci13: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 4.0 on pci0
pci6: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci6
pci7: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.2 on pci6
pci10: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 6.0 on pci0
pci3: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 28.0 on pci0
pci2: <PCI bus> on pcib6
ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdf80000-0xfdfbffff,0xfdff0000-0xfdff1fff irq 5 at device 1.0 on pci2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet> mem 0xfdf70000-0xfdf7ffff irq 5 at device 2.0 on pci2
bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:12:79:95:82:5f
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet> mem 0xfdf60000-0xfdf6ffff irq 5 at device 2.1 on pci2
bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseT PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: MAC address: 00:12:79:95:82:5e
uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 5 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 5 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> (vendor 0x8086, dev 0x25ab) at device 29.4
pci0: <base peripheral, interrupt controller> (vendor 0x8086, dev 0x25ac) at device 29.5
pci0: <serial bus, USB> (vendor 0x8086, dev 0x25ad) at device 29.7 irq 5
pcib7: <PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xfbff0000-0xfbff0fff,0xfc000000-0xfcffffff at device 3.0 on pci1
pci1: <base peripheral> (vendor 0x0e11, dev 0xb203) at device 4.0 irq 5
pci1: <base peripheral> (vendor 0x0e11, dev 0xb204) at device 4.2 irq 5
isab1: <PCI-ISA bridge> at device 31.0 on pci0
isa1: <ISA bus> on isab1
atapci0: <Intel 6300ESB UDMA100 controller> port 0x500-0x50f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4
ata1: <ATA channel 1> on atapci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa1
pmtimer0 on isa1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa1
sc0: <System console> at flags 0x100 on isa1
sc0: VGA <16 virtual consoles, flags=0x300>
sio2 at port 0x2f8-0x2ff irq 3 on isa1
sio2: type 16550A
ppc0: cannot reserve I/O port range
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 4 busses
CAM: finished configuring all busses (0 left)
no B_DEVMAGIC (bootdev=0)
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-4 device 
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
da1 at ciss0 bus 0 target 1 lun 0
da1: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-4 device 
da1: 135.168MB/s transfers
da1: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <COMPAQ CD-ROM SN-124 N104> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub1
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device 
da8: 1.000MB/s transfers
da8: 7656MB (15679488 512 byte sectors: 255H 63S/T 976C)
Mounting root from ufs:da8s1a
tryroot da8s1a
WARNING: /usr/release/mnt was not properly dismounted
Mounting devfs
Loading configuration files.
Loading devfs rules:
 /etc/defaults/devfs.conf
.
Starting file system checks:
WARNING: R/W mount of  denied.  Filesystem is not clean - run fsck
mount: 
/dev/da8s1a
: 
Operation not permitted
WARNING: R/W mount of  denied.  Filesystem is not clean - run fsck
mount: 
/dev/da8s1a
: 
Operation not permitted
Mounting /etc/fstab filesystems failed,  startup aborted

Setting hostname: .
rm: 
dev.db
: 
Read-only file system
rm: 
ld-elf.so.hints
: 
Read-only file system
rm: 
utmp
: 
Read-only file system
cp: 
utmp
: 
Read-only file system
/etc/rc.d/cleanvar: cannot create /var/run/clean_var: Read-only file system
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
Additional routing options:
.
hw.bus.devctl_disable: 
0
 -> 
1

Generating nsswitch.conf.
eval: cannot create /etc/nsswitch.conf: Read-only file system
Generating host.conf.
eval: cannot open /etc/nsswitch.conf: No such file or directory
Mounting NFS file systems:
.
rm: 
dev.db
: 
Read-only file system
rm: 
ld-elf.so.hints
: 
Read-only file system
rm: 
utmp
: 
Read-only file system
cp: 
utmp
: 
Read-only file system
/etc/rc.d/cleanvar: cannot create /var/run/clean_var: Read-only file system
Building databases...
dev_mkdb: 
/var/run/dev.tmp
: 
Read-only file system
install: 
/var/run/utmp
: 
Read-only file system
NFS CLIENT:
 access_cache_timeout=5
 neg_cache_timeout=3
.
eval: cannot create /var/run/dmesg.boot: Read-only file system
ELF ldconfig path: /usr/lib /usr/lib/gcc41 /usr/lib/gcc44 /usr/lib/compat /usr/pkg/lib /usr/local/lib
ldconfig: 
mkstemp(/var/run/ld-elf.so.hints.5Rqa48)
: 
Read-only file system
Starting local daemons:
.
Updating motd.
mktemp: 
mkstemp failed on /tmp/motd.mENNxrXX
: 
Read-only file system
eval: cannot create : No such file or directory
Configuring syscons:
 blanktime
.
sendmail_submit: /etc/mail/aliases.db not present, generating
warning: cannot lock /etc/mail/aliases: Unknown error: 0
Cannot open hash database /etc/mail/aliases.db: Read-only file system
WARNING: cannot open alias database /etc/mail/aliases
Cannot create database for alias file /etc/mail/aliases
sendmail_clientmqueue: /etc/mail/aliases.db not present, generating
warning: cannot lock /etc/mail/aliases: Unknown error: 0
Cannot open hash database /etc/mail/aliases.db: Read-only file system
WARNING: cannot open alias database /etc/mail/aliases
Cannot create database for alias file /etc/mail/aliases
Additional ABI support:
.
Local package initialization:
.
Additional TCP options:
.
Starting pfi...
Looking for pfi.conf on /dev/acd0...
mount_cd9660: 
/dev/acd0
: 
Invalid argument
 not found
Looking for pfi.conf on /dev/cd0...
mount_cd9660: 
/dev/cd0
: 
Invalid argument
 not found
Looking for pfi.conf on /dev/da0s1...
mount_msdos: 
/dev/da0s1
: 
Invalid argument
 not found
Looking for pfi.conf on /dev/da8s1...
mount_msdos: 
/dev/da8s1
: 
Invalid argument
 not found
eval: cannot create /etc/pfi.conf: Read-only file system
cp: 
/etc/rc.conf.orig
: 
Read-only file system
eval: cannot create /etc/rc.conf: Read-only file system
.: Can't open /etc/pfi.conf: No such file or directory
/etc/rc.d/msgs: cannot create /var/msgs/bounds: Read-only file system

Sun Jan 10 15:57:59 UTC 2010
bge0: watchdog timeout -- resetting
bge1: watchdog timeout -- resetting
umass1: <vendor 0x058f USB_DISK, class 0/0, rev 2.00/1.01, addr 3> on uhub1
umass1: Get Max Lun not supported (STALLED)
da9 at umass-sim1 bus 1 target 0 lun 0
da9: <USB_DISK  8.07> Removable Direct Access SCSI-2 device 
da9: 1.000MB/s transfers
da9: 955MB (1957376 512 byte sectors: 64H 32S/T 955C)
da9: slice starts beyond end of the disk: rejecting it
da9: slice starts beyond end of the disk: rejecting it
da9: slice starts beyond end of the disk: rejecting it
da9: slice starts beyond end of the disk: rejecting it
