Copyright (c) 2003-2011 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly v2.10.1.1.gf7ba0-RELEASE #1: Mon Apr 25 19:48:10 UTC 2011
    root@pkgbox32.dragonflybsd.org:/usr/obj/usr/src/sys/GENERIC
TSC clock: 863355177 Hz, i8254 clock: 1193104 Hz
CPU: Intel Pentium III (863.42-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 804842496 (767 MB)
avail memory = 763658240 (728 MB)
module_register: module pci/ahci already exists!
Module pci/ahci failed to register: 17
FQ scheduler policy version 1.0 loaded
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd1 at kbdmux0
ACPI: RSDP 0xf6ec0 00014 (v0 PTLTD )
ACPI: RSDT 0x2fefc9a3 0002C (v1 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 0x2fefc9cf 00074 (v1 FSC    D1235/36 06040000      000F4240)
ACPI: DSDT 0x2fefca43 02595 (v1 FSC    D1235/36 06040000 MSFT 0100000C)
ACPI: FACS 0x2fefffc0 00040
ACPI: BOOT 0x2fefefd8 00028 (v1 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/low
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8633 (Pro 266) host to PCI bridge> mem 0xea000000-0xea1fffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xea200000-0xea27ffff,0xf0000000-0xf7ffffff,0xe9000000-0xe9ffffff irq 11 at device 0.0 on pci1
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0xe8000800-0xe80008ff irq 10 at device 12.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:30:bd:b2:2d:7d
rl1: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xe8000c00-0xe8000cff irq 5 at device 14.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: MAC address: 00:05:1c:05:fa:20
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 9 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8001000-0xe80010ff irq 10 at device 16.2 on pci0
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
umass0: <Western Digital External HDD, class 0/0, rev 2.00/1.08, addr 2> on uhub2
fwohci0: <VIA Fire II (VT6306)> port 0x2000-0x207f mem 0xe8000000-0xe80007ff irq 9 at device 16.3 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:11:06:66:00:00:07:a7
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:11:06:00:07:a7
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port 0x3400-0x340f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
disk scheduler: set policy of ad0 to noop
ad0: 78533MB <Hitachi HDS728080PLAT20 PF2OA21B> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
firewire0: New S400 device ID:0010b92100f30500
disk scheduler: set policy of ad2 to noop
ad2: 19073MB <Maxtor 32049H2 YAH814Y0> at ata1-master UDMA100
acd0: DMA limited to UDMA33, device found non-ATA66 cable
disk scheduler: set policy of acd0 to noop
acd0: DVDR <ATAPI DVD A DH20A4P/9P53> at ata1-slave UDMA33
uhci2: <VIA 83C572 USB controller> port 0x2400-0x241f irq 9 at device 17.2 on pci0
usb3: <VIA 83C572 USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x2800-0x281f irq 9 at device 17.3 on pci0
usb4: <VIA 83C572 USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <VIA 83C572 USB controller> port 0x2c00-0x2c1f irq 9 at device 17.4 on pci0
usb5: <VIA 83C572 USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> (vendor 0x1106, dev 0x3059) at device 17.5 irq 5
cbb0: <TI1410 PCI-CardBus Bridge> at device 18.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on uhub3
uhub6: 4 ports with 4 removable, self powered
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 880C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc1: cannot reserve I/O port range
intr 9 at 40001/40000 hz, livelocked limit engaged!
intr 9 at 1/20000 hz, livelock removed
CAM: Configuring 4 busses
CAM: finished configuring all busses
disk scheduler: set policy of da8 to noop
disk scheduler: set policy of da0 to noop
disk scheduler: set policy of cd0 to noop
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <WD 2500JB External 0108> Fixed Direct Access SCSI-0 device 
da8: 40.000MB/s transfers
da8: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
da0 at sbp0 bus 0 target 0 lun 0
da0: <Maxtor OneTouch III 2804> Fixed Direct Access SCSI-4 device 
da0: Serial Number TB05GHHC
da0: 50.000MB/s transfers
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
cd0 at ata1 bus 0 target 1 lun 0
cd0: <ATAPI DVD A  DH20A4P 9P53> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.26, addr 3> on uhub6
disk scheduler: set policy of da9 to noop
da9 at umass-sim1 bus 1 target 0 lun 0
da9: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da9: 1.000MB/s transfers
da9: Attempt to query device size failed: NOT READY, Medium not present
disk scheduler: set policy of da10 to noop
da10 at umass-sim1 bus 1 target 0 lun 1
da10: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da10: 1.000MB/s transfers
da10: Attempt to query device size failed: NOT READY, Medium not present
disk scheduler: set policy of da11 to noop
da11 at umass-sim1 bus 1 target 0 lun 2
da11: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da11: 1.000MB/s transfers
da11: Attempt to query device size failed: NOT READY, Medium not present
disk scheduler: set policy of da12 to noop
da12 at umass-sim1 bus 1 target 0 lun 3
da12: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da12: 1.000MB/s transfers
da12: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer:serno/PFD200S2R4KK4B.s1b
tryroot serno/PFD200S2R4KK4B.s1b
HAMMER(ROOT) recovery check seqno=002c1ea3
HAMMER(ROOT) recovery range 3000000010101430-3000000010101430
HAMMER(ROOT) recovery nexto 3000000010101430 endseqno=002c1ea4
HAMMER(ROOT) mounted clean, no recovery needed
Mounting devfs
