Copyright (c) 2003-2012 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
Slab ZoneSize set to 128KB
Leaving critical section, allowing interrupts
ACPI SDT: RSDP not in EBDA
ACPI SDT: RSDP in BIOS mem
ACPI FADT: SCI irq 9, conform/conform
DragonFly v3.0.2-RELEASE #7: Thu Mar 22 14:05:25 MSK 2012
    root@df64.v12.su:/usr/obj/home/justin/make_30/src/sys/X86_64_GENERIC
Calibrating clock(s) ... TSC clock: 1795554298 Hz, i8254 clock: 1193218 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Mobile AMD Sempron(tm) Processor 3500+ (1795.51-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fc2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x19<LAHF,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2549414912 (2431 MB)
Physical memory chunk(s):
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
0x03340000 - 0x97f7ffff, 2495873024 bytes (609344 pages)
avail memory = 2347630592 (2238 MB)
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
ACPI MADT: BSP apic id 0
ACPI MADT: cpu id 1, apic id 0
lapic: divisor index 0, frequency 99750557 Hz
SMP: CPU0 apic_initialize():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
SMI Frequency (worst case): 27777 Hz (36 us)
SMP: Waiting APs LAPIC initialization
ACPI MADT: warning invalid intsrc irq 9 trig, level
ACPI MADT: warning invalid intsrc irq 9 pola, low
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
IOAPIC: idx 0, apic id 1, gsi base 0, npin 24
IOAPIC: irq 1, gsi 1 -> cpu0 (fixed)
IOAPIC: irq 1 -> gsi 1 edge/high
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
IOAPIC: irq 0 -> gsi 2 edge/high
IOAPIC: irq 3, gsi 3 -> cpu0 (fixed)
IOAPIC: irq 3 -> gsi 3 edge/high
IOAPIC: irq 4, gsi 4 -> cpu0 (fixed)
IOAPIC: irq 4 -> gsi 4 edge/high
IOAPIC: irq 5, gsi 5 -> cpu0 (fixed)
IOAPIC: irq 5 -> gsi 5 edge/high
IOAPIC: irq 6, gsi 6 -> cpu0 (fixed)
IOAPIC: irq 6 -> gsi 6 edge/high
IOAPIC: irq 7, gsi 7 -> cpu0 (fixed)
IOAPIC: irq 7 -> gsi 7 edge/high
IOAPIC: irq 8, gsi 8 -> cpu0 (fixed)
IOAPIC: irq 8 -> gsi 8 edge/high
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
IOAPIC: irq 9 -> gsi 9 edge/high
IOAPIC: irq 10, gsi 10 -> cpu0 (fixed)
IOAPIC: irq 10 -> gsi 10 edge/high
IOAPIC: irq 11, gsi 11 -> cpu0 (fixed)
IOAPIC: irq 11 -> gsi 11 edge/high
IOAPIC: irq 12, gsi 12 -> cpu0 (fixed)
IOAPIC: irq 12 -> gsi 12 edge/high
IOAPIC: irq 13, gsi 13 -> cpu0 (fixed)
IOAPIC: irq 13 -> gsi 13 edge/high
IOAPIC: irq 14, gsi 14 -> cpu0 (fixed)
IOAPIC: irq 14 -> gsi 14 edge/high
IOAPIC: irq 15, gsi 15 -> cpu0 (fixed)
IOAPIC: irq 15 -> gsi 15 edge/high
IOAPIC: irq 16, gsi 16 -> cpu0 (fixed)
IOAPIC: irq 16 -> gsi 16 level/low
IOAPIC: irq 17, gsi 17 -> cpu0 (fixed)
IOAPIC: irq 17 -> gsi 17 level/low
IOAPIC: irq 18, gsi 18 -> cpu0 (fixed)
IOAPIC: irq 18 -> gsi 18 level/low
IOAPIC: irq 19, gsi 19 -> cpu0 (fixed)
IOAPIC: irq 19 -> gsi 19 level/low
IOAPIC: irq 20, gsi 20 -> cpu0 (fixed)
IOAPIC: irq 20 -> gsi 20 level/low
IOAPIC: irq 21, gsi 21 -> cpu0 (fixed)
IOAPIC: irq 21 -> gsi 21 level/low
IOAPIC: irq 22, gsi 22 -> cpu0 (fixed)
IOAPIC: irq 22 -> gsi 22 level/low
IOAPIC: irq 23, gsi 23 -> cpu0 (fixed)
IOAPIC: irq 23 -> gsi 23 level/low
IOAPIC: cpu0 irq 2 reserved
IOAPIC: legacy irq max 24
ELCR Found.  ISA IRQs programmed as:
  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
  E  E  E  E  E  L  E  E  E  E  L  L  E  E  E  E
Initialize MI interrupts
Finish MP startup
Active CPU Mask: 0000000000000001
ndepotmags=340 x mag_cap=128 for mbuf
ndepotmags=170 x mag_cap=128 for mbuf pkt hdr
ndepotmags=21  x mag_cap=128 for cluster mbuf
ndepotmags=21  x mag_cap=128 for jcluster mbuf
ndepotmags=21  x mag_cap=128 for mbuf + cluster
ndepotmags=4   x mag_cap=83  for mbuf pkt hdr + cluster
ndepotmags=21  x mag_cap=128 for mbuf + jcluster
ndepotmags=4   x mag_cap=83  for mbuf pkt hdr + jcluster
ndepotmags=4   x mag_cap=33  for sf_buf
ndepotmags=3   x mag_cap=4   for exec-args
ndepotmags=4   x mag_cap=33  for CCMS
Preloaded elf kernel "kernel" at 0xffffffff82dbb000.
Preloaded elf obj module "acpi.ko" at 0xffffffff82dbb2f0.
Preloaded elf obj module "ehci.ko" at 0xffffffff82dbbc88.
start scheduler helpers on cpus: 0
start dummy scheduler helpers on cpus: 0
ndepotmags=4   x mag_cap=9   for thread
ndepotmags=4   x mag_cap=33  for dsched-tdio-cache
ndepotmags=4   x mag_cap=33  for dsched-tdctx-cache
ndepotmags=4   x mag_cap=33  for dsched-diskctx-cache
ndepotmags=4   x mag_cap=9   for vmspace
ndepotmags=4   x mag_cap=33  for devfs-node-cache
ndepotmags=4   x mag_cap=33  for devfs-msg-cache
ndepotmags=4   x mag_cap=33  for devfs-dev-cache
ndepotmags=4   x mag_cap=33  for disk-msg-cache
FQ scheduler policy version 1.1 loaded
ndepotmags=4   x mag_cap=33  for pdict32
ndepotmags=4   x mag_cap=33  for proparay
ndepotmags=4   x mag_cap=33  for pdict16
ndepotmags=4   x mag_cap=33  for propnmbr
ndepotmags=4   x mag_cap=33  for propdict
ndepotmags=4   x mag_cap=33  for propstng
ndepotmags=4   x mag_cap=33  for pdict128
ndepotmags=4   x mag_cap=33  for propdata
ndepotmags=4   x mag_cap=9   for devfs
ndepotmags=4   x mag_cap=33  for devfs-rule-cache
wlan: <802.11 Link Layer>
ndepotmags=4   x mag_cap=33  for ata_request
ndepotmags=4   x mag_cap=33  for ata_composite
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd: new array size 4
kbd1 at kbdmux0
ndepotmags=4   x mag_cap=33  for crypto op
ndepotmags=4   x mag_cap=33  for crypto desc
crypto: <crypto core>
md0: invalid primary partition table: no magic
IOAPIC: rman cpu0 0 - 1
IOAPIC: rman cpu0 3 - 95
IOAPIC: rman cpu0 97 - 191
ACPI: RSDP 0xfe0b0 00024 (v2 HP    )
ACPI: XSDT 0x97fc81b8 0005C (v1 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: FACP 0x97fc8084 000F4 (v4 HP     0944     00000003 HP   00000001)
ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x    8800/0x       0    8100, using 32 (20110211/tbfadt-529)
ACPI: DSDT 0x97fc8498 11437 (v1 HP        SB400 00010000 MSFT 03000001)
ACPI: FACS 0x97fe7d80 00040
ACPI: SLIC 0x97fc8214 00176 (v1 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: EPTH 0x97fc838c 00038 (v1 HP     0944     00000001 HP   00000001)
ACPI: APIC 0x97fc83c4 00062 (v1 HP     0944     00000001 HP   00000001)
ACPI: MCFG 0x97fc8428 0003C (v1 HP     0944     00000001 HP   00000001)
ACPI: TCPA 0x97fc8464 00032 (v2 HP     0944     00000001 HP   00000001)
ACPI: SSDT 0x97fd98cf 000F4 (v1 HP     PSSTBLID 00000001 HP   00000001)
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <HPQOEM SLIC-MPC> [tentative] on motherboard
ndepotmags=4   x mag_cap=33  for Acpi-Namespace
ndepotmags=4   x mag_cap=33  for Acpi-State
ndepotmags=4   x mag_cap=33  for Acpi-Parse
ndepotmags=4   x mag_cap=33  for Acpi-ParseExt
ndepotmags=4   x mag_cap=33  for Acpi-Operand
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI testing level/low
IOAPIC: irq 9, gsi 9 edge/high -> level/low
ACPI FADT: SCI select level/low
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=79101002)
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
unknown: I/O range not supported
ACPI timer looks GOOD min = 4, max = 6, width = 2
ACPI timer looks GOOD min = 4, max = 6, width = 2
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <32-bit timer at 3.579545MHz> [tentative] port 0x8008-0x800b on acpi0
acpi_timer0: <32-bit timer at 3.579545MHz> [attached!] port 0x8008-0x800b on acpi0
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x11> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> [attached!] port 0x66,0x62 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  9
  Validation          0  255   N     0  9
  After Disable       0  255   N     0  9
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pcib0.acpi0.nexus0.root0
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
pci0.pcib0.acpi0.nexus0.root0
pci0: <ACPI PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1002, dev=0x7910, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x7912, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x7914, revid=0x00
	domain=0, bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000000
found->	vendor=0x1002, dev=0x7915, revid=0x00
	domain=0, bus=0, slot=5, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000000
found->	vendor=0x1002, dev=0x7916, revid=0x00
	domain=0, bus=0, slot=6, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000000
found->	vendor=0x1002, dev=0x4380, revid=0x00
	domain=0, bus=0, slot=18, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x9000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x9008, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x9010, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x5018, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x5020, size  4, enabled
	map[24]: type Memory, range 32, base 0xd0609000, size 10, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4387, revid=0x00
	domain=0, bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xd0601000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 23
found->	vendor=0x1002, dev=0x4388, revid=0x00
	domain=0, bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[10]: type Memory, range 32, base 0xd0602000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4389, revid=0x00
	domain=0, bus=0, slot=19, func=2
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[10]: type Memory, range 32, base 0xd0603000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found->	vendor=0x1002, dev=0x438a, revid=0x00
	domain=0, bus=0, slot=19, func=3
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	map[10]: type Memory, range 32, base 0xd0604000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found->	vendor=0x1002, dev=0x438b, revid=0x00
	domain=0, bus=0, slot=19, func=4
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[10]: type Memory, range 32, base 0xd0605000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found->	vendor=0x1002, dev=0x4386, revid=0x00
	domain=0, bus=0, slot=19, func=5
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0606000, size  8, enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 23
found->	vendor=0x1002, dev=0x4385, revid=0x14
	domain=0, bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0x8200, size  4, enabled
found->	vendor=0x1002, dev=0x438c, revid=0x00
	domain=0, bus=0, slot=20, func=1
	class=01-01-82, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0220, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x5040, size  4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x4383, revid=0x00
	domain=0, bus=0, slot=20, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xd0608000, size 14, enabled
pci:0:20:2: resource reservation failed 0xd0608000 - 0xd060bfff
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x438d, revid=0x00
	domain=0, bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4384, revid=0x00
	domain=0, bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1.pci0.pcib0.acpi0.nexus0.root0
pcib1: <ACPI PCI-PCI bridge> [tentative] at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x4000-0x4fff
pcib1:   memory decode     0xd0400000-0xd05fffff
pcib1:   prefetched decode 0xc0000000-0xc7ffffff
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
pci1: <ACPI PCI bus> [tentative] on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x791f, revid=0x00
	domain=0, bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 27, enabled
pcib1: requested memory range 0xc0000000-0xc7ffffff: good
	map[18]: type Memory, range 64, base 0xd0400000, size 16, enabled
pcib1: requested memory range 0xd0400000-0xd040ffff: good
	map[20]: type I/O Port, range 32, base 0x4000, size  8, enabled
pcib1: requested I/O range 0x4000-0x40ff: in range
	map[24]: type Memory, range 32, base 0xd0500000, size 20, enabled
pcib1: requested memory range 0xd0500000-0xd05fffff: good
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0x4000-0x40ff mem 0xd0500000-0xd05fffff,0xd0400000-0xd040ffff,0xc0000000-0xc7ffffff irq 19 at device 5.0 on pci1
vgapci0: <VGA-compatible display> [attached!] port 0x4000-0x40ff mem 0xd0500000-0xd05fffff,0xd0400000-0xd040ffff,0xc0000000-0xc7ffffff irq 19 at device 5.0 on pci1
pci1: <ACPI PCI bus> [attached!] on pcib1
pcib1: <ACPI PCI-PCI bridge> [attached!] at device 1.0 on pci0
pcib2.pci0.pcib0.acpi0.nexus0.root0
pcib2: <ACPI PCI-PCI bridge> [tentative] at device 4.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     16
pcib2:   subordinate bus   16
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xd0000000-0xd00fffff
pcib2:   no prefetched decode
pcib2: could not get PCI interrupt routing table for \\_SB_.C08B.C24F - AE_NOT_FOUND
pci16.pcib2.pci0.pcib0.acpi0.nexus0.root0
pci16: <ACPI PCI bus> [tentative] on pcib2
pci16: domain=0, physical bus=16
found->	vendor=0x14e4, dev=0x1693, revid=0x02
	domain=0, bus=16, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled
pcib2: requested memory range 0xd0000000-0xd000ffff: good
pcib2: No _PRT found, routing with pci
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
pcib2: slot 0 INTA is routed to irq 16
bge0.pci16.pcib2.pci0.pcib0.acpi0.nexus0.root0
bge0: <Broadcom BCM5787M Gigabit Ethernet> [tentative] mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
bge0: Disabling fastboot
vm_page_alloc_contig: 0000000000020000/16396k
vm_page_alloc_contig: 0000000000024000/16396k
vm_page_alloc_contig: 0000000000028000/16388k
boundary check failed
alignment check failed
miibus0.bge0.pci16.pcib2.pci0.pcib0.acpi0.nexus0.root0
miibus0: <MII bus> [tentative] on bge0
brgphy0.miibus0.bge0.pci16.pcib2.pci0.pcib0.acpi0.nexus0.root0
brgphy0: <BCM5787 10/100/1000baseT PHY> [tentative] on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
brgphy0: <BCM5787 10/100/1000baseT PHY> [attached!] on miibus0
miibus0: <MII bus> [attached!] on bge0
bge0: bpf attached
bge0: MAC address: 00:1a:4b:6f:7f:40
bge0: <Broadcom BCM5787M Gigabit Ethernet> [attached!] mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
pci16: <ACPI PCI bus> [attached!] on pcib2
pcib2: <ACPI PCI-PCI bridge> [attached!] at device 4.0 on pci0
pcib3.pci0.pcib0.acpi0.nexus0.root0
pcib3: <ACPI PCI-PCI bridge> [tentative] at device 5.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     32
pcib3:   subordinate bus   32
pcib3:   I/O decode        0x2000-0x3fff
pcib3:   memory decode     0xcc000000-0xcfffffff
pcib3:   no prefetched decode
pcib3: could not get PCI interrupt routing table for \\_SB_.C08B.C254 - AE_NOT_FOUND
pci32.pcib3.pci0.pcib0.acpi0.nexus0.root0
pci32: <ACPI PCI bus> [tentative] on pcib3
pci32: domain=0, physical bus=32
pci32: <ACPI PCI bus> [attached!] on pcib3
pcib3: <ACPI PCI-PCI bridge> [attached!] at device 5.0 on pci0
pcib4.pci0.pcib0.acpi0.nexus0.root0
pcib4: <ACPI PCI-PCI bridge> [tentative] at device 6.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     48
pcib4:   subordinate bus   48
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xc8000000-0xc80fffff
pcib4:   no prefetched decode
pcib4: could not get PCI interrupt routing table for \\_SB_.C08B.C25E - AE_NOT_FOUND
pci48.pcib4.pci0.pcib0.acpi0.nexus0.root0
pci48: <ACPI PCI bus> [tentative] on pcib4
pci48: domain=0, physical bus=48
found->	vendor=0x14e4, dev=0x4311, revid=0x02
	domain=0, bus=48, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	PCI Express ver.1 cap=0x0001[DEVICE]
	map[10]: type Memory, range 64, base 0xc8000000, size 14, enabled
pcib4: requested memory range 0xc8000000-0xc8003fff: good
pcib4: No _PRT found, routing with pci
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib4: slot 0 INTA is routed to irq 18
pci48: <network> (vendor 0x14e4, dev 0x4311) at device 0.0 irq 18
pci48: <ACPI PCI bus> [attached!] on pcib4
pcib4: <ACPI PCI-PCI bridge> [attached!] at device 6.0 on pci0
ahci0.pci0.pcib0.acpi0.nexus0.root0
ahci0: <ATI-SB600-SATA> [tentative] port 0x5020-0x502f,0x5018-0x501b,0x9010-0x9017,0x9008-0x900b,0x9000-0x9007 mem 0xd0609000-0xd06093ff irq 16 at device 18.0 on pci0
ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xd0609000


Fatal trap 12: page fault while in kernel mode
cpuid = 0; lapic->id = 00000000
fault virtual address	= 0xffffffe04b8ff018
fault code		= supervisor read data, page not present
instruction pointer	= 0x8:0xffffffff802cffd2
stack pointer	        = 0x10:0xffffffff825887b0
frame pointer	        = 0x10:0xffffffff825887c0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 0, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0
current thread          = pri 12 
kernel: type 12 trap, code=0

CPU0 stopping CPUs: 0x00000000
 stopped
