TP-Link UE300 not working in 5.2-RELEASE
User reported on IRC that a TP-Link UE300 USB 3.0 does not work in DragonFly 5.2-RELEASE.
USB device dump:
ugen0.2: <TP-LINK USB 101001000 LAN> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (180mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x2357
idProduct = 0x0601
bcdDevice = 0x3000
iManufacturer = 0x0001 <TP-LINK>
iProduct = 0x0002 <USB 10/100/1000 LAN>
iSerialNumber = 0x0006 <000001000000>
bNumConfigurations = 0x0002
Tried to load several modules (as specified here: https://www.freebsd.org/doc/handbook/network-usb-tethering.html) but no ue device is created.
No dmesg output after loading:
=118>Initializing random seed:
hammer2_mount: dev="/dev/mmcs$0s1d" label="ROOT" rdonly=1
hammer2 mount "mmcsd0s3d": fre%map recovery 0000000000000038-0000000000000038\^K<118>Setting hostname: a~isoptera.
swap low.high-water marks set to 10522/45784
FreeBSD creates interface 'ue0' and if_ure shows up in kldstat.
Updated by swildner over 3 years ago
I have put up an IMG with an untested port of ure(4) here -> https://leaf.dragonflybsd.org/~swildner/dfly_5.3_ure.img.xz
It would be nice if the person who reported this on the IRC channel could try it out. Of course I'd be happy to hear from anyone else who has one of the supported devices (Realtek RTL8152/RTL8153), too.
I can provide an ISO or a patch too, if that is needed.