|
Copyright (c) 2003-2013 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
DragonFly v3.4.3.16.g5011f5-RELEASE #1: Tue Nov 12 16:39:54 CET 2013
|
|
........@........................:/usr/obj/usr/src/sys/GENERIC
|
|
TSC clock: 1994976528 Hz, i8254 clock: 1193168 Hz
|
|
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.01-MHz 686-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
|
|
AMD Features=0x20100000<NX,LM>
|
|
AMD Features2=0x1<LAHF>
|
|
real memory = 2145518592 (2046 MB)
|
|
avail memory = 2054144000 (1958 MB)
|
|
lapic: divisor index 0, frequency 83125393 Hz
|
|
Initialize MI interrupts
|
|
FQ scheduler policy version 1.1 loaded
|
|
wdog: In-kernel automatic watchdog reset enabled
|
|
kbd1 at kbdmux0
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
ACPI: RSDP 0xfc070 00014 (v00 DELL )
|
|
ACPI: RSDT 0x7fe8198a 00044 (v01 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: FACP 0x7fe82800 00074 (v01 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: DSDT 0x7fe83400 05495 (v01 INT430 SYSFexxx 00001001 INTL 20050624)
|
|
ACPI: FACS 0x7fe91c00 00040
|
|
ACPI: HPET 0x7fe82f00 00038 (v01 DELL M07 00000001 ASL 00000061)
|
|
ACPI: APIC 0x7fe83000 00068 (v01 DELL M07 27D60C12 ASL 00000047)
|
|
ACPI: ASF! 0x7fe82c00 0005B (v16 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: MCFG 0x7fe82fc0 0003E (v16 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: SLIC 0x7fe8309c 00176 (v01 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: TCPA 0x7fe83300 00032 (v01 DELL M07 27D60C12 ASL 00000061)
|
|
ACPI: SSDT 0x7fe81a11 004DC (v01 PmRef CpuPm 00003000 INTL 20050624)
|
|
npx0: <math processor> on motherboard
|
|
npx0: INT 16 interface
|
|
Using XMM optimized bcopy/copyin/copyout
|
|
cryptosoft0: <software crypto> on motherboard
|
|
acpi0: <DELL M07 > on motherboard
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI select level/high
|
|
ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x93 (20110527/tbutils-354)
|
|
ACPI: SSDT 0x7fe819ce 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
|
|
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: frequency 14318180
|
|
acpi_acad0: <AC Adapter> on acpi0
|
|
battery0: <ACPI Control Method Battery> on acpi0
|
|
battery1: <ACPI Control Method Battery> on acpi0
|
|
acpi_lid0: <Control Method Lid Switch> on acpi0
|
|
acpi_button0: <Power Button> on acpi0
|
|
acpi_button1: <Sleep Button> on acpi0
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
|
|
pci1: <ACPI PCI bus> on pcib1
|
|
vgapci0: <VGA-compatible display> mem 0xee000000-0xeeffffff,0xd0000000-0xdfffffff,0xed000000-0xedffffff irq 16 at device 0.0 on pci1
|
|
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 21
|
|
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
|
|
pcib2: Disable PCI Express hot-plug interrupts(0x0008)
|
|
pci11: <ACPI PCI bus> on pcib2
|
|
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
|
|
pcib3: Disable PCI Express hot-plug interrupts(0x0008)
|
|
pci12: <ACPI PCI bus> on pcib3
|
|
pci12: <network> (vendor 0x8086, dev 0x4222) at device 0.0 irq 17
|
|
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
|
|
pcib4: Disable PCI Express hot-plug interrupts(0x0008)
|
|
pci9: <ACPI PCI bus> on pcib4
|
|
bge0: <Broadcom BCM5752 Gigabit Ethernet> mem 0xecef0000-0xecefffff irq 18 at device 0.0 on pci9
|
|
bge0: CHIP ID 0x00006002; ASIC REV 0x06; CHIP REV 0x60; PCI-E
|
|
miibus0: <MII bus> on bge0
|
|
brgphy0: <BCM5752 10/100/1000baseT PHY> on miibus0
|
|
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
bge0: MAC address: 00:19:b9:69:38:f7
|
|
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
|
|
pcib5: Disable PCI Express hot-plug interrupts(0x0008)
|
|
pci13: <ACPI PCI bus> on pcib5
|
|
uhci0: <Intel 82801G (ICH7) USB controller> port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0
|
|
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhci1: <Intel 82801G (ICH7) USB controller> port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0
|
|
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhci2: <Intel 82801G (ICH7) USB controller> port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0
|
|
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhci3: <Intel 82801G (ICH7) USB controller> port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0
|
|
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
|
|
usb4: EHCI version 1.0
|
|
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
|
|
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
|
|
usb4: USB revision 2.0
|
|
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
|
|
uhub4: 8 ports with 8 removable, self powered
|
|
uhub5: <vendor 0x413c product 0x0058, class 9/0, rev 2.00/0.00, addr 2> on uhub4
|
|
uhub5: multiple transaction translators
|
|
uhub5: 4 ports with 4 removable, self powered
|
|
uhub6: <vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2> on uhub0
|
|
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub1
|
|
uhub6: 4 ports with 1 removable, self powered
|
|
uhub7: 3 ports with 2 removable, bus powered
|
|
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on uhub5
|
|
ums0: 3 buttons and Z dir.
|
|
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
pci3: <ACPI PCI bus> on pcib6
|
|
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
|
|
cardbus0: <CardBus bus> on cbb0
|
|
pccard0: <16-bit PCCard bus> on cbb0
|
|
fwohci0: vendor=1217, dev=f7
|
|
fwohci0: <1394 Open Host Controller Interface> mem 0xecbfe800-0xecbfefff,0xecbff000-0xecbfffff irq 19 at device 1.4 on pci3
|
|
fwohci0: OHCI version 1.10 (ROM=0)
|
|
fwohci0: No. of Isochronous channel is 8.
|
|
fwohci0: EUI64 37:4f:c0:00:16:76:68:50
|
|
fwohci0: Phy 1394a available S400, 2 ports.
|
|
fwohci0: Link S400, max_rec 2048 bytes.
|
|
firewire0: <IEEE1394(FireWire) bus> on fwohci0
|
|
fwe0: <Ethernet over FireWire> on firewire0
|
|
ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub7
|
|
fwe0: MAC address: 36:4f:c0:76:68:50
|
|
sbp0: <SBP-2/SCSI over FireWire> on firewire0
|
|
fwohci0: Initiate bus reset
|
|
Unknown tcode 14
|
|
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
|
|
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
|
|
firewire0: bus manager 0 (me)
|
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
atapci0: <Intel ICH7M SATA300 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 17 at device 31.2 on pci0
|
|
ata0: <ATA channel 0> on atapci0
|
|
disk scheduler: set policy of ad0 to noop
|
|
ugen1: <vendor 0x413c product 0x8103, class 224/1, rev 2.00/24.22, addr 3> on uhub6
|
|
ad0: 76319MB <Hitachi HTS721080G9SA00 MC4OC10H> at ata0-master SATA150
|
|
ata1: <ATA channel 1> on atapci0
|
|
disk scheduler: set policy of acd0 to noop
|
|
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata1-master UDMA33
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 17
|
|
acpi_tz0: <Thermal Zone> on acpi0
|
|
atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
|
|
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
|
|
kbd0 at atkbd0
|
|
psm0: <PS/2 Mouse> irq 12 on atkbdc0
|
|
psm0: model GlidePoint, device ID 0
|
|
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
|
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
ppc0: FIFO with 16/16/7 bytes threshold
|
|
ppbus0: <Parallel port bus> on ppc0
|
|
plip0: <PLIP network interface> on ppbus0
|
|
lpt0: <Printer> on ppbus0
|
|
lpt0: Interrupt-driven port
|
|
ppi0: <Parallel I/O> on ppbus0
|
|
cpu0: <ACPI CPU> on acpi0
|
|
ACPI: SSDT 0x7fe82138 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
|
|
ACPI: SSDT 0x7fe81eed 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
|
|
cpu_cst0: <ACPI CPU C-State> on cpu0
|
|
cpu_pst0: <ACPI CPU P-State> on cpu0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
ACPI: SSDT 0x7fe8237c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
|
|
ACPI: SSDT 0x7fe820b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
|
|
cpu_cst1: <ACPI CPU C-State> on cpu1
|
|
cpu_pst1: <ACPI CPU P-State> on cpu1
|
|
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
|
|
pmtimer0 on isa0
|
|
fdc0: ready for input in output
|
|
fdc0: cmd 3 failed at out byte 1 of 3
|
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0: <System console> at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
ppc1: cannot reserve I/O port range
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring 3 busses
|
|
CAM: finished configuring all busses
|
|
disk scheduler: set policy of cd0 to noop
|
|
cd0 at ata1 bus 0 target 0 lun 0
|
|
cd0: <TSSTcorp CDRW/DVD TSL462D DE01> Removable CD-ROM SCSI-0 device
|
|
cd0: 33.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
|
|
Mounting root from hammer:serno/MPCDN7Y4HKY96L.s1d
|
|
HAMMER(ROOT) recovery check seqno=00bd5eb8
|
|
HAMMER(ROOT) recovery range 300000001948fab8-300000001948fab8
|
|
HAMMER(ROOT) recovery nexto 300000001948fab8 endseqno=00bd5eb9
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 196k, remaining available: 16384k
|
|
Mounting devfs
|
