| 1 | Copyright (c) 2003-2009 The DragonFly Project.
|
| 2 | Copyright (c) 1992-2003 The FreeBSD Project.
|
| 3 | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
| 4 | The Regents of the University of California. All rights reserved.
|
| 5 | DragonFly 2.2.1-RELEASE #1: Mon Apr 27 04:19:39 GMT 2009
|
| 6 | root@test29.backplane.com:/usr/obj/usr/src/sys/GENERIC
|
| 7 | TSC clock: 698450516 Hz, i8254 clock: 1193149 Hz
|
| 8 | CPU: Intel Pentium III (698.47-MHz 686-class CPU)
|
| 9 | Origin = "GenuineIntel" Id = 0x686 Stepping = 6
|
| 10 | Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
|
| 11 | real memory = 536780800 (524200K bytes)
|
| 12 | avail memory = 507740160 (495840K bytes)
|
| 13 | Preloaded elf kernel "/boot/kernel" at 0xc07c5000.
|
| 14 | Preloaded elf module "/boot/modules/acpi.ko" at 0xc07c51c8.
|
| 15 | Pentium Pro MTRR support enabled
|
| 16 | md0: Malloc disk
|
| 17 | pcibios: BIOS version 2.10
|
| 18 | Using $PIR table, 10 entries at 0xc00fbc20
|
| 19 | ACPI: RSDP @ 0x0xfde50/0x0014 (v 0 DELL )
|
| 20 | ACPI: RSDT @ 0x0xfde64/0x0028 (v 1 DELL CPi R 0x27D40115 ASL 0x00000061)
|
| 21 | ACPI: FACP @ 0x0xfde90/0x0074 (v 1 DELL CPi R 0x27D40115 ASL 0x00000061)
|
| 22 | ACPI: DSDT @ 0x0xfffe4000/0x2B4C (v 1 INT430 SYSFexxx 0x00001001 MSFT 0x0100000E)
|
| 23 | ACPI: FACS @ 0x0x1ffff800/0x0040
|
| 24 | npx0: <math processor> on motherboard
|
| 25 | npx0: INT 16 interface
|
| 26 | Using MMX optimized bcopy/copyin/copyout
|
| 27 | acpi0: <DELL CPi R > on motherboard
|
| 28 | Warning: ACPI is disabling APM's device. You can't run both
|
| 29 | acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
|
| 30 | cpu0: <ACPI CPU> on acpi0
|
| 31 | acpi_tz0: <Thermal Zone> on acpi0
|
| 32 | acpi_acad0: <AC Adapter> on acpi0
|
| 33 | battery0: <ACPI Control Method Battery> on acpi0
|
| 34 | battery1: <ACPI Control Method Battery> on acpi0
|
| 35 | acpi_lid0: <Control Method Lid Switch> on acpi0
|
| 36 | acpi_button0: <Power Button> on acpi0
|
| 37 | acpi_button1: <Sleep Button> on acpi0
|
| 38 | atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
|
| 39 | atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
|
| 40 | kbd0 at atkbd0
|
| 41 | psm0: <PS/2 Mouse> irq 12 on atkbdc0
|
| 42 | psm0: model Generic PS/2 mouse, device ID 0
|
| 43 | fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
|
| 44 | fdc0: FIFO enabled, 8 bytes threshold
|
| 45 | fd0: <1440-KB 3.5" drive> on fdc0 drive 0
|
| 46 | sio0 port 0x3f8-0x3ff irq 4 on acpi0
|
| 47 | sio0: type 16550A
|
| 48 | ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
|
| 49 | ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
| 50 | ppc0: FIFO with 16/16/8 bytes threshold
|
| 51 | ppbus0: <Parallel port bus> on ppc0
|
| 52 | plip0: <PLIP network interface> on ppbus0
|
| 53 | lpt0: <Printer> on ppbus0
|
| 54 | lpt0: Interrupt-driven port
|
| 55 | ppi0: <Parallel I/O> on ppbus0
|
| 56 | legacypci0 on motherboard
|
| 57 | pcib0: <Host to PCI bridge> on legacypci0
|
| 58 | pci0: <PCI bus> on pcib0
|
| 59 | agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
|
| 60 | pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
|
| 61 | pci1: <PCI bus> on pcib1
|
| 62 | pci1: <ATI model 4d46 graphics accelerator> at 0.0 irq 11
|
| 63 | pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
|
| 64 | pci2: <PCI bus> on pcib2
|
| 65 | pci2: <unknown card> (vendor=0x125d, dev=0x1998) at 3.0 irq 5
|
| 66 | xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem 0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 10 at device 6.0 on pci2
|
| 67 | miibus0: <MII bus> on xl0
|
| 68 | ukphy0: <Generic IEEE 802.3u media interface> on miibus0
|
| 69 | ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
| 70 | xl0: MAC address: 00:01:03:89:85:bf
|
| 71 | pci2: <unknown card> (vendor=0x10b7, dev=0x1007) at 6.1 irq 10
|
| 72 | cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2
|
| 73 | cardbus0: <CardBus bus> on cbb0
|
| 74 | pccard0: <16-bit PCCard bus> on cbb0
|
| 75 | pci_cfgintr: 0:30 INTC routed to irq 3
|
| 76 | pcib2: routed slot 15 INTA to irq 3
|
| 77 | intr 10 at 40001/40000 hz, livelocked limit engaged!
|
| 78 | cbb1: <TI4451 PCI-CardBus Bridge> at device 15.1 on pci2
|
| 79 | cardbus1: <CardBus bus> on cbb1
|
| 80 | pccard1: <16-bit PCCard bus> on cbb1
|
| 81 | pci_cfgintr: 0:30 INTC routed to irq 3
|
| 82 | pcib2: routed slot 15 INTA to irq 3
|
| 83 | fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8ffc800-0xf8ffcfff irq 10 at device 15.2 on pci2
|
| 84 | fwohci0: OHCI version 1.0 (ROM=1)
|
| 85 | fwohci0: No. of Isochronous channel is 4.
|
| 86 | fwohci0: EUI64 39:4f:c0:00:1a:82:d4:01
|
| 87 | fwohci0: Phy 1394a available S400, 1 ports.
|
| 88 | fwohci0: Link S400, max_rec 2048 bytes.
|
| 89 | firewire0: <IEEE1394(FireWire) bus> on fwohci0
|
| 90 | fwe0: <Ethernet over FireWire> on firewire0
|
| 91 | fwe0: MAC address: 3a:4f:c0:82:d4:01
|
| 92 | sbp0: <SBP-2/SCSI over FireWire> on firewire0
|
| 93 | fwohci0: Initiate bus reset
|
| 94 | fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
|
| 95 | firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
|
| 96 | firewire0: bus manager 0 (me)
|
| 97 | isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
|
| 98 | isa0: <ISA bus> on isab0
|
| 99 | atapci0: <Intel ICH2 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
|
| 100 | ata0: <ATA channel 0> on atapci0
|
| 101 | dc0: <Xircom X3201 10/100BaseTX> port 0xe000-0xe07f mem 0xf4002000-0xf40027ff,0xf4002800-0xf4002fff irq 3 at device 0.0 on cardbus0
|
| 102 | miibus1: <MII bus> on dc0
|
| 103 | ukphy1: <Generic IEEE 802.3u media interface> on miibus1
|
| 104 | ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
| 105 | dc0: MAC address: 00:10:a4:c7:51:4e
|
| 106 | ad0: 114473MB <TOSHIBA MK1234GAX AC001A> at ata0-master UDMA100
|
| 107 | acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402/1021> at ata0-slave UDMA33
|
| 108 | ata1: <ATA channel 1> on atapci0
|
| 109 | uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xdce0-0xdcff irq 10 at device 31.2 on pci0
|
| 110 | usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
|
| 111 | usb0: USB revision 1.0
|
| 112 | uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
|
| 113 | uhub0: 2 ports with 2 removable, self powered
|
| 114 | pmtimer0 on isa0
|
| 115 | fdc1: cannot reserve I/O port range
|
| 116 | vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
| 117 | sc0: <System console> at flags 0x100 on isa0
|
| 118 | sc0: VGA <16 virtual consoles, flags=0x300>
|
| 119 | sio2: can't drain, serial port might not exist, disabling
|
| 120 | ppc1: cannot reserve I/O port range
|
| 121 | intr 10 at 0/20000 hz, livelock removed
|
| 122 | Mounting root from hammer:/dev/ad0s1a
|
| 123 | cd0 at ata0 bus 0 target 1 lun 0
|
| 124 | cd0: <TOSHIBA DVD-ROM SD-C2402 1021> Removable CD-ROM SCSI-0 device
|
| 125 | cd0: 33.000MB/s transfers
|
| 126 | cd0: Attempt to query device size failed: NOT READY, Medium not present
|
| 127 | intr 10 at 40001/40000 hz, livelocked limit engaged!
|
| 128 | intr 10 at 16203/20000 hz, livelock removed
|
| 129 | intr 10 at 40001/40000 hz, livelocked limit engaged!
|
| 130 | intr 10 at 11930/20000 hz, livelock removed
|
| 131 | intr 10 at 40001/40000 hz, livelocked limit engaged!
|
| 132 | intr 10 at 4387/20000 hz, livelock removed
|
| 133 | intr 10 at 40001/40000 hz, livelocked limit engaged!
|
| 134 | dc0: watchdog timeout
|
| 135 | dc0: watchdog timeout
|
| 136 | dc0: watchdog timeout
|
| 137 | dc0: watchdog timeout
|
| 138 | dc0: watchdog timeout
|
| 139 | dc0: watchdog timeout
|
| 140 | dc0: watchdog timeout
|
| 141 | dc0: watchdog timeout
|
| 142 | dc0: watchdog timeout
|
| 143 | dc0: watchdog timeout
|
| 144 | dc0: watchdog timeout
|
| 145 | dc0: watchdog timeout
|
| 146 | dc0: watchdog timeout
|
| 147 | dc0: watchdog timeout
|
| 148 | dc0: watchdog timeout
|
| 149 | dc0: watchdog timeout
|
| 150 | dc0: watchdog timeout
|
| 151 | dc0: watchdog timeout
|
| 152 | dc0: watchdog timeout
|
| 153 | dc0: watchdog timeout
|
| 154 | dc0: watchdog timeout
|
| 155 | dc0: watchdog timeout
|
| 156 | dc0: watchdog timeout
|
| 157 | dc0: watchdog timeout
|
| 158 | dc0: watchdog timeout
|
| 159 | dc0: watchdog timeout
|