Project

General

Profile

Actions

Bug #2052

open

Kernel panic: CPU APIC ID out of range

Added by Anonymous almost 13 years ago. Updated almost 13 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
-
Target version:
Start date:
Due date:
% Done:

0%

Estimated time:

Description

Hello,

booting DragonFly BSD from a CD ends with a kernel panic. A screenshot of the console is attached. The machine is a Dell PowerEdge M610 blade. The same problem occurs on both of our M610s, one with older 45nm Xeons and one with newer 32nm Xeons. I'd like to run some performance benchmarks of the Hammer file system on the machines, so a fully working SMP system with ACPI support is probably needed. If you need more debugging information, please let me know how to get it. A piece of advice on how to circumvent this issue would be very helpful. :-)

Andrej


Files

panic.png (19.5 KB) panic.png Anonymous, 04/21/2011 12:38 PM
smime.p7s (5.67 KB) smime.p7s Anonymous, 04/21/2011 12:38 PM
frozen.png (19.8 KB) frozen.png Anonymous, 04/21/2011 04:23 PM
smime.p7s (5.67 KB) smime.p7s Anonymous, 04/21/2011 04:23 PM
Actions #1

Updated by sepherosa almost 13 years ago

On Thu, Apr 21, 2011 at 8:37 PM, Andrej Podzimek <> wrote:

Hello,

booting DragonFly BSD from a CD ends with a kernel panic. A screenshot of
the console is attached. The machine is a Dell PowerEdge M610 blade. The
same problem occurs on both of our M610s, one with older 45nm Xeons and one
with newer 32nm Xeons. I'd like to run some performance benchmarks of the
Hammer file system on the machines, so a fully working SMP system with ACPI
support is probably needed. If you need more debugging information, please
let me know how to get it. A piece of advice on how to circumvent this issue
would be very helpful. :-)

Which CD did you use? "CPU APIC ID" does not exist in the code base at all.

I suggest you to try:
http://avalon.dragonflybsd.org/snapshots/x86_64/DragonFly-x86_64-LATEST-ISO.iso.bz2

Best Regards,
sephe

Actions #2

Updated by Anonymous almost 13 years ago

booting DragonFly BSD from a CD ends with a kernel panic. A screenshot of
the console is attached. The machine is a Dell PowerEdge M610 blade. The
same problem occurs on both of our M610s, one with older 45nm Xeons and one
with newer 32nm Xeons. I'd like to run some performance benchmarks of the
Hammer file system on the machines, so a fully working SMP system with ACPI
support is probably needed. If you need more debugging information, please
let me know how to get it. A piece of advice on how to circumvent this issue
would be very helpful. :-)

Which CD did you use? "CPU APIC ID" does not exist in the code base at all.

I suggest you to try:
http://avalon.dragonflybsd.org/snapshots/x86_64/DragonFly-x86_64-LATEST-ISO.iso.bz2

Thank you for your suggestion. The CD I tried before was dfly-x86_64-2.8.2_REL.iso. With the CD you suggest, the boot process freezes due to a problem with the keyboard driver (screenshot attached).

The keyboard is somehow emulated by Dell's iDRAC and the remote console software, so it's not a common piece of hardware. But both Linux and OpenIndiana run just fine on the same machine.

Andrej

Actions #3

Updated by swildner almost 13 years ago

On Thu, 21 Apr 2011 18:21:33 +0200, Andrej Podzimek <>
wrote:

I suggest you to try:
http://avalon.dragonflybsd.org/snapshots/x86_64/DragonFly-x86_64-LATEST-ISO.iso.bz2

Thank you for your suggestion. The CD I tried before was
dfly-x86_64-2.8.2_REL.iso. With the CD you suggest, the boot process
freezes due to a problem with the keyboard driver (screenshot attached).

The keyboard is somehow emulated by Dell's iDRAC and the remote console
software, so it's not a common piece of hardware. But both Linux and
OpenIndiana run just fine on the same machine.

Are you sure it's a atkbd issue? Can you try booting verbosely and see if
it outputs more?

Sascha

Actions

Also available in: Atom PDF