Project

General

Profile

Bug #2652 » lenovo_s10_dmesg.txt

davshao, 03/03/2014 01:12 PM

 
Copyright (c) 2003-2014 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Slab ZoneSize set to 128KB
Leaving critical section, allowing interrupts
ACPI SDT: RSDP not in EBDA
ACPI SDT: RSDP in BIOS mem
ACPI FADT: SCI irq 9, conform/conform
MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
DragonFly v3.7.1.790.g0612e9-DEVELOPMENT #9: Mon Mar 3 08:56:04 PST 2014
xxxxxxx@:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ...
TSC clock: 1595995596 Hz, i8254 clock: 1193178 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>

1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 512 kbytes, 16-way associative, 64 bytes/line
real memory = 1063712768 (1014 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00e61000 - 0x3f6affff, 1048899584 bytes (256079 pages)
avail memory = 1009778688 (963 MB)
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
ACPI MADT: BSP apic id 0
ACPI MADT: cpu id 0, apic id 0
ACPI MADT: cpu id 1, apic id 1
lapic: divisor index 0, frequency 66500360 Hz
SMP: CPU0 apic_initialize():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
SMP: Waiting APs LAPIC initialization
SMP: CPU1 apic_initialize():
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ACPI MADT: warning invalid intsrc irq 9 trig, level
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
ACPI MADT: SCI irq 9, first test level/high
IOAPIC: idx 0, apic id 2, gsi base 0, npin 24
IOAPIC: irq 1, gsi 1 -> cpu0 (fixed)
IOAPIC: irq 1 -> gsi 1 edge/high
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
IOAPIC: irq 0 -> gsi 2 edge/high
IOAPIC: irq 3, gsi 3 -> cpu0 (fixed)
IOAPIC: irq 3 -> gsi 3 edge/high
IOAPIC: irq 4, gsi 4 -> cpu0 (fixed)
IOAPIC: irq 4 -> gsi 4 edge/high
IOAPIC: irq 5, gsi 5 -> cpu0 (fixed)
IOAPIC: irq 5 -> gsi 5 edge/high
IOAPIC: irq 6, gsi 6 -> cpu0 (fixed)
IOAPIC: irq 6 -> gsi 6 edge/high
IOAPIC: irq 7, gsi 7 -> cpu0 (fixed)
IOAPIC: irq 7 -> gsi 7 edge/high
IOAPIC: irq 8, gsi 8 -> cpu0 (fixed)
IOAPIC: irq 8 -> gsi 8 edge/high
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
IOAPIC: irq 9 -> gsi 9 edge/high
IOAPIC: irq 10, gsi 10 -> cpu0 (fixed)
IOAPIC: irq 10 -> gsi 10 edge/high
IOAPIC: irq 11, gsi 11 -> cpu0 (fixed)
IOAPIC: irq 11 -> gsi 11 edge/high
IOAPIC: irq 12, gsi 12 -> cpu0 (fixed)
IOAPIC: irq 12 -> gsi 12 edge/high
IOAPIC: irq 13, gsi 13 -> cpu0 (fixed)
IOAPIC: irq 13 -> gsi 13 edge/high
IOAPIC: irq 14, gsi 14 -> cpu0 (fixed)
IOAPIC: irq 14 -> gsi 14 edge/high
IOAPIC: irq 15, gsi 15 -> cpu0 (fixed)
IOAPIC: irq 15 -> gsi 15 edge/high
IOAPIC: irq 16, gsi 16 -> cpu0 (fixed)
IOAPIC: irq 16 -> gsi 16 level/low
IOAPIC: irq 17, gsi 17 -> cpu0 (fixed)
IOAPIC: irq 17 -> gsi 17 level/low
IOAPIC: irq 18, gsi 18 -> cpu0 (fixed)
IOAPIC: irq 18 -> gsi 18 level/low
IOAPIC: irq 19, gsi 19 -> cpu0 (fixed)
IOAPIC: irq 19 -> gsi 19 level/low
IOAPIC: irq 20, gsi 20 -> cpu0 (fixed)
IOAPIC: irq 20 -> gsi 20 level/low
IOAPIC: irq 21, gsi 21 -> cpu0 (fixed)
IOAPIC: irq 21 -> gsi 21 level/low
IOAPIC: irq 22, gsi 22 -> cpu0 (fixed)
IOAPIC: irq 22 -> gsi 22 level/low
IOAPIC: irq 23, gsi 23 -> cpu0 (fixed)
IOAPIC: irq 23 -> gsi 23 level/low
IOAPIC: legacy irq max 24
IOAPIC: cpu0 irq 2 reserved
IOAPIC: cpu1 irq 0 reserved
IOAPIC: cpu1 irq 1 reserved
IOAPIC: cpu1 irq 2 reserved
IOAPIC: cpu1 irq 3 reserved
IOAPIC: cpu1 irq 4 reserved
IOAPIC: cpu1 irq 5 reserved
IOAPIC: cpu1 irq 6 reserved
IOAPIC: cpu1 irq 7 reserved
IOAPIC: cpu1 irq 8 reserved
IOAPIC: cpu1 irq 9 reserved
IOAPIC: cpu1 irq 10 reserved
IOAPIC: cpu1 irq 11 reserved
IOAPIC: cpu1 irq 12 reserved
IOAPIC: cpu1 irq 13 reserved
IOAPIC: cpu1 irq 14 reserved
IOAPIC: cpu1 irq 15 reserved
IOAPIC: cpu1 irq 16 reserved
IOAPIC: cpu1 irq 17 reserved
IOAPIC: cpu1 irq 18 reserved
IOAPIC: cpu1 irq 19 reserved
IOAPIC: cpu1 irq 20 reserved
IOAPIC: cpu1 irq 21 reserved
IOAPIC: cpu1 irq 22 reserved
IOAPIC: cpu1 irq 23 reserved
ELCR Found. ISA IRQs programmed as:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
E E E L E L E E E E L L E E E E
MPTABLE: 0:28 INTA -> IOAPIC 0.17
MPTABLE: 0:27 INTA -> IOAPIC 0.22
MPTABLE: 0:29 INTB -> IOAPIC 0.19
MPTABLE: 0:2 INTA -> IOAPIC 0.16
MPTABLE: 0:28 INTB -> IOAPIC 0.16
MPTABLE: 0:28 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTA -> IOAPIC 0.23
MPTABLE: 0:29 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTD -> IOAPIC 0.16
MPTABLE: 0:31 INTB -> IOAPIC 0.19
MPTABLE: 2:0 INTA -> IOAPIC 0.16
Initialize MI interrupts
objcache: magazine cap [13, 141]
Finish MP startup
Active CPU Mask: 00000003
bios32: Found BIOS32 Service Directory header at 0xa00f7b10
bios32: Entry = 0xfdc40 (a00fdc40) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x221
pnpbios: Found PnP BIOS data at 0xa00f7b80
pnpbios: Entry = f0000:c244 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xa0e31000.
Preloaded elf module "ehci.ko" at 0xa0e313fc.
Bits within APICID: logical_CPU_bits: 1; core_bits: 0
CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1;
Start scheduler helpers on cpus:
cpu0 - HyperThreading available. Core siblings: cpu0 cpu1
cpu1 - HyperThreading available. Core siblings: cpu0 cpu1
start dummy scheduler helpers on cpus: 0 1
Start scheduler helpers on cpus:
cpu0 - HyperThreading available. Core siblings: cpu0 cpu1
cpu1 - HyperThreading available. Core siblings: cpu0 cpu1
FQ scheduler policy version 1.1 loaded
wdog: In-kernel automatic watchdog reset enabled
ath_rate: <SampleRate bit-rate selection algorithm>
ath_dfs: WTF module
wlan: <802.11 Link Layer>
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd: new array size 4
kbd1 at kbdmux0
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: invalid primary partition table: no magic
Math emulator present
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hpt27xx: RocketRAID 27xx controller driver v1.0 (Mar 3 2014 08:42:05)
IOAPIC: rman cpu0 0 - 1
IOAPIC: rman cpu0 3 - 95
IOAPIC: rman cpu0 97 - 191
IOAPIC: rman cpu1 24 - 95
IOAPIC: rman cpu1 97 - 191
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086)
pcibios: BIOS version 3.00
$PIR: checksum failed!
pcib0.legacy0.nexus0.root0
pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x27ac, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27ae, revid=0x03
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xf0500000, size 19, enabled
map[14]: type I/O Port, range 32, base 0x1800, size 3, enabled
map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
map[1c]: type Memory, range 32, base 0xf0600000, size 18, enabled
MPTABLE: 0:2 INTA routed to irq 16
found-> vendor=0x8086, dev=0x27a6, revid=0x03
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0580000, size 19, enabled
found-> vendor=0x8086, dev=0x27d8, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
PCI Express ver.1 cap=0x0091[ROOTDEV]
map[10]: type Memory, range 64, base 0xf0640000, size 14, enabled
MPTABLE: 0:27 INTA routed to irq 22
found-> vendor=0x8086, dev=0x27d0, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]
MPTABLE: 0:28 INTA routed to irq 17
found-> vendor=0x8086, dev=0x27d2, revid=0x02
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]
MPTABLE: 0:28 INTB routed to irq 16
found-> vendor=0x8086, dev=0x27d4, revid=0x02
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0020a0e0[HOTPLUG]
MPTABLE: 0:28 INTC routed to irq 18
found-> vendor=0x8086, dev=0x27c8, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
MPTABLE: 0:29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x27c9, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
MPTABLE: 0:29 INTB routed to irq 19
found-> vendor=0x8086, dev=0x27ca, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
MPTABLE: 0:29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x27cb, revid=0x02
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
MPTABLE: 0:29 INTD routed to irq 16
found-> vendor=0x8086, dev=0x27cc, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0844000, size 10, enabled
MPTABLE: 0:29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x2448, revid=0xe2
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b9, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x02
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled
found-> vendor=0x8086, dev=0x27c4, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x18c8, size 3, enabled
map[14]: type I/O Port, range 32, base 0x18c0, size 2, enabled
map[18]: type I/O Port, range 32, base 0x18a8, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x180c, size 2, enabled
map[20]: type I/O Port, range 32, base 0x18b0, size 4, enabled
map[24]: type Memory, range 32, base 0xf0844400, size 10, enabled
MPTABLE: 0:31 INTB routed to irq 19
found-> vendor=0x8086, dev=0x27da, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled
MPTABLE: 0:31 INTB routed to irq 19
vgapci0.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] port 0x1800-0x1807 mem 0xf0600000-0xf063ffff,0xd0000000-0xdfffffff,0xf0500000-0xf057ffff irq 16 at device 2.0 on pci0
agp0.vgapci0.pci0.pcib0.legacy0.nexus0.root0
agp0: <Intel 945GME SVGA controller> [tentative] on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf0500000
vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf0600000
agp0: Allocated flush page phys 0x80000000 virt 0xabf3e000
agp0: aperture size is 256M, detected 7932k stolen memory
agp0: AGP_I810_PGTBL_CTL: 3ffc0001
agp0: AGP_I855_GCC1: 0x30
agp0: AGP_I915_MSAC: 0x00
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 65536
agp0: <Intel 945GME SVGA controller> [attached!] on vgapci0
vgapci0: <VGA-compatible display> [attached!] port 0x1800-0x1807 mem 0xf0600000-0xf063ffff,0xd0000000-0xdfffffff,0xf0500000-0xf057ffff irq 16 at device 2.0 on pci0
vgapci1.pci0.pcib0.legacy0.nexus0.root0
vgapci1: <VGA-compatible display> [tentative] mem 0xf0580000-0xf05fffff at device 2.1 on pci0
vgapci1: <VGA-compatible display> [attached!] mem 0xf0580000-0xf05fffff at device 2.1 on pci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 22
pcib1.pci0.pcib0.legacy0.nexus0.root0
pcib1: <MPTABLE PCI-PCI bridge> [tentative] irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xf0200000-0xf02fffff
pcib1: prefetched decode 0xf0000000-0xf00fffff
pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0
pci2: <PCI bus> [tentative] on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x14e4, dev=0x1713, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
PCI Express ver.1 cap=0x0001[DEVICE]
map[10]: type Memory, range 64, base 0xf0200000, size 16, enabled
pcib1: requested memory range 0xf0200000-0xf020ffff: good
MPTABLE: 2:0 INTA routed to irq 16
bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0
bge0: <Broadcom BCM5906M Fast Ethernet> [tentative] mem 0xf0200000-0xf020ffff irq 16 at device 0.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf0200000
bge0: adjust device control 0x2000 -> 0x5000
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
bge0: enable status tag
bge0: attempting to allocate 1 MSI vector (1 supported)
alloc MSI intr 24 on cpu0
bge0: using IRQ 24 on cpu0 for MSI
alignment check failed
alignment check failed
miibus0.bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0
miibus0: <MII bus> [tentative] on bge0
brgphy0.miibus0.bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0
brgphy0: <BCM5906 10/100baseTX PHY> [tentative] on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
brgphy0: <BCM5906 10/100baseTX PHY> [attached!] on miibus0
miibus0: <MII bus> [attached!] on bge0
bge0: bpf attached
bge0: MAC address: 00:23:8b:9f:4c:8d
bge0: oneshot MSI
map MSI intr 24 on cpu0
bge0: <Broadcom BCM5906M Fast Ethernet> [attached!] mem 0xf0200000-0xf020ffff irq 24,16 at device 0.0 on pci2
pci2: <PCI bus> [attached!] on pcib1
pcib1: <MPTABLE PCI-PCI bridge> [attached!] irq 17 at device 28.0 on pci0
pcib2.pci0.pcib0.legacy0.nexus0.root0
pcib2: <MPTABLE PCI-PCI bridge> [tentative] irq 16 at device 28.1 on pci0
pcib2: domain 0
pcib2: secondary bus 3
pcib2: subordinate bus 4
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xf0300000-0xf03fffff
pcib2: prefetched decode 0xf0100000-0xf01fffff
pci3.pcib2.pci0.pcib0.legacy0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: domain=0, physical bus=3
pci3: <PCI bus> [attached!] on pcib2
pcib2: <MPTABLE PCI-PCI bridge> [attached!] irq 16 at device 28.1 on pci0
pcib3.pci0.pcib0.legacy0.nexus0.root0
pcib3: <MPTABLE PCI-PCI bridge> [tentative] irq 18 at device 28.2 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 5
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf0400000-0xf04fffff
pcib3: no prefetched decode
pci5.pcib3.pci0.pcib0.legacy0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib3
pci5: domain=0, physical bus=5
found-> vendor=0x14e4, dev=0x4315, revid=0x01
domain=0, bus=5, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
PCI Express ver.1 cap=0x0001[DEVICE]
map[10]: type Memory, range 64, base 0xf0400000, size 14, enabled
pcib3: requested memory range 0xf0400000-0xf0403fff: good
MPTABLE: 0:28 INTA routed to irq 17
pcib3: slot 0 INTA is routed to irq 17
pci5: <network> (vendor 0x14e4, dev 0x4315) at device 0.0 irq 17
pci5: <PCI bus> [attached!] on pcib3
pcib3: <MPTABLE PCI-PCI bridge> [attached!] irq 18 at device 28.2 on pci0
uhci0.pci0.pcib0.legacy0.nexus0.root0
uhci0: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
usb0: <Intel 82801G (ICH7) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <Intel 82801G (ICH7) USB controller> [attached!] on uhci0
uhci0: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci1.pci0.pcib0.legacy0.nexus0.root0
uhci1: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
usb1: <Intel 82801G (ICH7) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <Intel 82801G (ICH7) USB controller> [attached!] on uhci1
uhci1: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci2.pci0.pcib0.legacy0.nexus0.root0
uhci2: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
usb2: <Intel 82801G (ICH7) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <Intel 82801G (ICH7) USB controller> [attached!] on uhci2
uhci2: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci3.pci0.pcib0.legacy0.nexus0.root0
uhci3: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
usb3: <Intel 82801G (ICH7) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <Intel 82801G (ICH7) USB controller> [attached!] on uhci3
uhci3: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1880-0x189f irq 16 at device 29.3 on pci0
ehci0.pci0.pcib0.legacy0.nexus0.root0
ehci0: <Intel 82801GB/R USB 2.0 controller> [tentative] mem 0xf0844000-0xf08443ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0844000
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0
usb4: <Intel 82801GB/R USB 2.0 controller> [tentative] on ehci0
usb4: USB revision 2.0
uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb4
uhub4: 8 ports with 8 removable, self powered
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb4
ugen0.uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0
ugen0: <Image Processor Lenovo EasyCamera, class 239/2, rev 2.00/28.67, addr 2> [tentative] on uhub4
ugen0: <Image Processor Lenovo EasyCamera, class 239/2, rev 2.00/28.67, addr 2> [attached!] on uhub4
ums0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [tentative] on uhub0
ums0: 3 buttons and Z dir.
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [attached!] on uhub0
umass0.uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 3> [tentative] on uhub4
umass0:0:0:-1: Attached to scbus0
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 3> [attached!] on uhub4
usb4: <Intel 82801GB/R USB 2.0 controller> [attached!] on ehci0
ehci0: <Intel 82801GB/R USB 2.0 controller> [attached!] mem 0xf0844000-0xf08443ff irq 23 at device 29.7 on pci0
pcib4.pci0.pcib0.legacy0.nexus0.root0
pcib4: <MPTABLE PCI-PCI bridge> [tentative] at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 6
pcib4: subordinate bus 6
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci6.pcib4.pci0.pcib0.legacy0.nexus0.root0
pci6: <PCI bus> [tentative] on pcib4
pci6: domain=0, physical bus=6
pci6: <PCI bus> [attached!] on pcib4
pcib4: <MPTABLE PCI-PCI bridge> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <Intel ICH7 UDMA100 controller> [tentative] port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=20 ostat1=20
ata0: stat0=0x5a err=0x5a lsb=0x5a msb=0x5a
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat1=0x4e err=0x4e lsb=0x4e msb=0x4e
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ICH7 UDMA100 controller> [attached!] port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci1.pci0.pcib0.legacy0.nexus0.root0
atapci1: <Intel ICH7M SATA300 controller> [tentative] port 0x18b0-0x18bf,0x180c-0x180f,0x18a8-0x18af,0x18c0-0x18c3,0x18c8-0x18cf mem 0xf0844400-0xf08447ff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf0844400
atapci1: AHCI called from vendor specific driver
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata2: <ATA channel 0> [tentative] on atapci1
ata2: SATA connect time=0ms
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
No policy for ad4 specified, or policy not found
disk scheduler: set policy of ad4 to noop
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad4: 152627MB <WDC WD1600BEVT-22ZCT0 11.01A11> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ata2: <ATA channel 0> [attached!] on atapci1
ata3.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata3: <ATA channel 1> [tentative] on atapci1
ata3: port not implemented
ata3: <ATA channel 1> [attached!] on atapci1
ata4.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata4: <ATA channel 2> [tentative] on atapci1
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: <ATA channel 2> [attached!] on atapci1
ata5.atapci1.pci0.pcib0.legacy0.nexus0.root0
ata5: <ATA channel 3> [tentative] on atapci1
ata5: port not implemented
ata5: <ATA channel 3> [attached!] on atapci1
atapci1: <Intel ICH7M SATA300 controller> [attached!] port 0x18b0-0x18bf,0x180c-0x180f,0x18a8-0x18af,0x18c0-0x18c3,0x18c8-0x18cf mem 0xf0844400-0xf08447ff irq 19 at device 31.2 on pci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19
pci0: <PCI bus> [attached!] on pcib0
pcib0: <MPTABLE Host-PCI bridge> [attached!] pcibus 0 on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
orm0: <Option ROMs> [tentative] at iomem 0xdf000-0xdf7ff,0xe0000-0xe17ff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xdf000-0xdf7ff,0xe0000-0xe17ff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
psm0: current command byte:0047
ad4: type 0xc, start 63, end = 78124094, size 78124032
ad4: C/H/S end 1023/0/63 (16499006) != end 78124094: invalid
ad4: type 0x5, start 78124156, end = 217921724, size 139797569
ad4: C/H/S start 1023/254/63 (16515008) != start 78124156: invalid
ad4: C/H/S end 1023/2/63 (16499132) != end 217921724: invalid
ad4: type 0x12, start 281638912, end = 312581807, size 30942896
ad4: C/H/S end 1023/15/63 (16499951) != end 312581807: invalid
ad4: type 0xa5, start 217921725, end = 281635514, size 63713790 : OK
ad4: type 0x83, start 78124158, end = 140616944, size 62492787
ad4: C/H/S start 1023/254/63 (16515008) != start 78124158: invalid
ad4: C/H/S end 1023/254/63 (16515008) != end 140616944: invalid
ad4<extended>: type 0x5, start 140616945, end = 208973519, size 68356575
ad4<extended>: C/H/S start 1023/254/63 (16515008) != start 140616945: invalid
ad4<extended>: C/H/S end 1023/254/63 (16515008) != end 208973519: invalid
ad4: type 0x7, start 140617008, end = 208973519, size 68356512
ad4: C/H/S start 1023/254/63 (16515008) != start 140617008: invalid
ad4: C/H/S end 1023/254/63 (16515008) != end 208973519: invalid
ad4<extended>: type 0x5, start 208973520, end = 217921724, size 8948205
ad4<extended>: C/H/S start 1023/254/63 (16515008) != start 208973520: invalid
ad4<extended>: C/H/S end 1023/254/63 (16515008) != end 217921724: invalid
ad4: type 0x82, start 208973583, end = 217921724, size 8948142
ad4: C/H/S start 1023/254/63 (16515008) != start 208973583: invalid
ad4: C/H/S end 1023/254/63 (16515008) != end 217921724: invalid
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xa00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
faith0: bpf attached
lo0: bpf attached
crypto: <crypto device>
ppp0: bpf attached
sl0: bpf attached
hptrr: no controller detected.
hpt27xx: no controller detected.
CAM: Configuring bus: umass-sim0
CAM: Configuring bus: ata1
CAM: Configuring bus: ata2
CAM: Configuring bus: ata3
CAM: Configuring bus: ata4
CAM: Configuring bus: ata5
CAM: Configuring 6 busses
CAM: Finished configuring bus: ata0
CAM: Finished configuring bus: ata1
CAM: Finished configuring bus: ata2
CAM: Finished configuring bus: ata3
CAM: Finished configuring bus: ata4
CAM: Finished configuring bus: ata5
CAM: finished configuring all busses
bootdev: a0500000 type=0 unit=0 slice=5 part=0 major=3
ATA PseudoRAID loaded
pass8 at umass-sim0 bus 0 target 0 lun 0
pass8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
pass8: 40.000MB/s transfers
sg8 at umass-sim0 bus 0 target 0 lun 0
sg8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
sg8: 40.000MB/s transfers
(probe8:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe8:umass-sim0:0:0:0): Uninitialized Transport 5:1?
No policy for da8 specified, or policy not found
disk scheduler: set policy of da8 to noop
da8: si_iosize_max:131072
cam_periph_alloc: attempt to re-allocate valid device sg8 rejected
sgasync: Unable to attach new device due to status 0x6: CCB request was invalid
CAM: Finished configuring bus: umass-sim0
(da8:umass-sim0:0:0:0): error 6
(da8:umass-sim0:0:0:0): Unretryable Error
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
da8: 40.000MB/s transfers
da8: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/serno/WD-WXE409VMC423.s4a
DMA space used: 4452k, remaining available: 16384k
Mounting devfs
start_init: trying /sbin/init
bge0: MSI_MODE: 0x2
bge0: link DOWN
bge0: link UP
(1-1/2)