|
0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x1e12, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=1
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x000cb200
|
|
pcib0: matched entry for 0.28.INTB
|
|
pcib0: slot 28 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0x1e14, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=2
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0014b200
|
|
pcib0: matched entry for 0.28.INTC
|
|
pcib0: slot 28 INTC hardwired to GSI 18, IRQ 18
|
|
found-> vendor=0x8086, dev=0x1e16, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=3
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x001cb200
|
|
pcib0: matched entry for 0.28.INTD
|
|
pcib0: slot 28 INTD hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0x1e18, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=4
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024b200
|
|
pcib0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x244e, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=5
|
|
class=06-04-01, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x002cb200
|
|
pcib0: matched entry for 0.28.INTB
|
|
pcib0: slot 28 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0x1e26, revid=0x04
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=3
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f17000, size 10, enabled
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to GSI 23, IRQ 23
|
|
found-> vendor=0x8086, dev=0x1e44, revid=0x04
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x1e02, revid=0x04
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type I/O Port, range 32, base 0xf070, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0xf060, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
|
|
map[24]: type Memory, range 32, base 0xf7f16000, size 11, enabled
|
|
pcib0: matched entry for 0.31.INTB
|
|
pcib0: slot 31 INTB hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0x1e22, revid=0x04
|
|
domain=0, bus=0, slot=31, func=3
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
map[10]: type Memory, range 64, base 0xf7f15000, size 8, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
|
|
pcib0: matched entry for 0.31.INTC
|
|
pcib0: slot 31 INTC hardwired to GSI 18, IRQ 18
|
|
pci0: <serial bus, USB> (vendor 0x8086, dev 0x1e31) at device 20.0 irq 16
|
|
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
|
|
ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci0: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0
|
|
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f18000
|
|
usbus0: waiting for BIOS to give up control
|
|
usbus0: EHCI version 1.0
|
|
usbus0.ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus0: <Intel Panther Point USB 2.0 controller> [tentative] on ehci0
|
|
usbus0: <Intel Panther Point USB 2.0 controller> [attached!] on ehci0
|
|
ehci0: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0
|
|
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xf000-0xfff
|
|
pcib1: no prefetched decode
|
|
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
pci1: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 28.1 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: no prefetched decode
|
|
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 28.1 on pci0
|
|
pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] irq 18 at device 28.2 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0xf000-0xfff
|
|
pcib3: no prefetched decode
|
|
pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] irq 18 at device 28.2 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 19 at device 28.3 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0xe000-0xefff
|
|
pcib4: memory decode 0xf7e00000-0xf7efffff
|
|
pcib4: prefetched decode 0xe0000000-0xefffffff
|
|
pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x1002, dev=0x9540, revid=0x00
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
|
|
pcib4: requested memory range 0xe0000000-0xefffffff: good
|
|
map[18]: type Memory, range 64, base 0xf7e20000, size 16, enabled
|
|
pcib4: requested memory range 0xf7e20000-0xf7e2ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled
|
|
pcib4: requested I/O range 0xe000-0xe0ff: in range
|
|
pcib4: matched entry for 4.0.INTA
|
|
pcib4: slot 0 INTA hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x1002, dev=0xaa38, revid=0x00
|
|
domain=0, bus=4, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xf7e30000, size 14, enabled
|
|
pcib4: requested memory range 0xf7e30000-0xf7e33fff: good
|
|
pcib4: matched entry for 4.0.INTB
|
|
pcib4: slot 0 INTB hardwired to GSI 16, IRQ 16
|
|
vgapci0.pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0xe000-0xe0ff mem 0xf7e20000-0xf7e2ffff,0xe0000000-0xefffffff irq 19 at device 0.0 on pci4
|
|
vgapci0: Boot video device
|
|
vgapci0: <VGA-compatible display> [attached!] port 0xe000-0xe0ff mem 0xf7e20000-0xf7e2ffff,0xe0000000-0xefffffff irq 19 at device 0.0 on pci4
|
|
pci4: <multimedia, HDA> (vendor 0x1002, dev 0xaa38) at device 0.1 irq 16
|
|
pci4: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 19 at device 28.3 on pci0
|
|
pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib5: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.4 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0xd000-0xdfff
|
|
pcib5: prefetched decode 0xf0000000-0xf00fffff
|
|
pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pci5: <ACPI PCI bus> [tentative] on pcib5
|
|
pci5: domain=0, physical bus=5
|
|
found-> vendor=0x10ec, dev=0x8168, revid=0x06
|
|
domain=0, bus=5, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 4 messages in map 0x20
|
|
PCI Express ver.2 cap=0x0202[DEVICE]
|
|
map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled
|
|
pcib5: requested I/O range 0xd000-0xd0ff: in range
|
|
map[18]: type Prefetchable Memory, range 64, base 0xf0004000, size 12, enabled
|
|
pcib5: requested memory range 0xf0004000-0xf0004fff: good
|
|
map[20]: type Prefetchable Memory, range 64, base 0xf0000000, size 14, enabled
|
|
pcib5: requested memory range 0xf0000000-0xf0003fff: good
|
|
pcib5: matched entry for 5.0.INTA
|
|
pcib5: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
|
|
re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0xd000-0xd0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci5
|
|
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf0004000
|
|
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
|
|
miibus0.re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on re0
|
|
rgephy0: rev: 5
|
|
rgephy0.miibus0.re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [tentative] on miibus0
|
|
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on re0
|
|
usbus0: 480Mbps High Speed USB v2.0
|
|
re0: bpf attached
|
|
re0: MAC address: bc:5f:f4:49:91:04
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0xd000-0xd0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci5
|
|
pci5: <ACPI PCI bus> [attached!] on pcib5
|
|
pcib5: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.4 on pci0
|
|
pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib6: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 28.5 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 6
|
|
pcib6: subordinate bus 7
|
|
pcib6: I/O decode 0xf000-0xfff
|
|
pcib6: no prefetched decode
|
|
pcib6: Subtractively decoded bridge.
|
|
pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci6: <ACPI PCI bus> [tentative] on pcib6
|
|
pci6: domain=0, physical bus=6
|
|
found-> vendor=0x1b21, dev=0x1080, revid=0x03
|
|
domain=0, bus=6, slot=0, func=0
|
|
class=06-04-01, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
pcib6: matched entry for 6.0.INTA
|
|
pcib6: slot 0 INTA hardwired to GSI 17, IRQ 17
|
|
pcib7.pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib7: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 0.0 on pci6
|
|
pcib7: domain 0
|
|
pcib7: secondary bus 7
|
|
pcib7: subordinate bus 7
|
|
pcib7: I/O decode 0xfff000-0xfff
|
|
pcib7: no prefetched decode
|
|
pcib7: Subtractively decoded bridge.
|
|
pci7.pcib7.pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci7: <ACPI PCI bus> [tentative] on pcib7
|
|
pci7: domain=0, physical bus=7
|
|
pci7: <ACPI PCI bus> [attached!] on pcib7
|
|
pcib7: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 0.0 on pci6
|
|
pci6: <ACPI PCI bus> [attached!] on pcib6
|
|
pcib6: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 28.5 on pci0
|
|
ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci1: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0
|
|
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f17000
|
|
ugen0.1: <Intel> at usbus0
|
|
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
|
|
usbus1: waiting for BIOS to give up control
|
|
usbus1: EHCI version 1.0
|
|
usbus1.ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus1: <Intel Panther Point USB 2.0 controller> [tentative] on ehci1
|
|
usbus1: <Intel Panther Point USB 2.0 controller> [attached!] on ehci1
|
|
ehci1: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
ahci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0
|
|
ahci0: attempting to allocate 1 MSI vector (1 supported)
|
|
alloc MSI intr 17 on cpu0
|
|
ahci0: using IRQ 17 on cpu0 for MSI
|
|
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf7f16000
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
ugen1.1: <Intel> at usbus1
|
|
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
ugen0.2: <vendor 0x8087> at usbus0
|
|
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
|
|
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 6 ports, 32 tags/port, gen 3 (6Gbps)
|
|
ahci0.0: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.0: START HARDRESET
|
|
ahci0.1: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.1: START HARDRESET
|
|
ahci0.2: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.3: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.3: START HARDRESET
|
|
ahci0.4: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.4: START HARDRESET
|
|
ahci0.5: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.5: START HARDRESET
|
|
map MSI intr 17 on cpu0
|
|
ahci0.2: START HARDRESET
|
|
ugen1.2: <vendor 0x8087> at usbus1
|
|
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
|
|
ahci0.1: Port appears to be unplugged
|
|
ahci0.0: Port appears to be unplugged
|
|
ahci0.5: Port appears to be unplugged
|
|
ahci0.2: END HARDRESET 0
|
|
ahci0.3: END HARDRESET 0
|
|
ahci0.4: END HARDRESET 0
|
|
ahci0.3: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.4: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.2: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.3: sig 00000101
|
|
ahci0.4: sig 00000101
|
|
ahci0.2: sig 00000101
|
|
ahci0.3: END SOFTRESET
|
|
ahci0.4: END SOFTRESET
|
|
ahci0.2: END SOFTRESET
|
|
ahci0.0: No device detected
|
|
ahci0.1: No device detected
|
|
ahci0.5: No device detected
|
|
ahci0.0: END HARDRESET 19
|
|
ahci0.1: END HARDRESET 19
|
|
ahci0.5: END HARDRESET 19
|
|
(probe0:ahci0:0:0:0): error 22
|
|
(probe0:ahci0:0:0:0): Unretryable Error
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
(probe0:ahci0:1:0:0): error 22
|
|
(probe0:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
|
|
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
|
|
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.2: Set dummy xfer mode to 46
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
|
|
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
|
|
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.3: Set dummy xfer mode to 46
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
|
|
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
|
|
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.4: Set dummy xfer mode to 46
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
(probe0:ahci0:5:0:0): error 22
|
|
(probe0:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xf7f16000-0xf7f167ff irq 17,19 at device 31.2 on pci0
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ppc0: using extended I/O port range
|
|
ppc0: ECP SPP ECP+EPP SPP
|
|
ppc0.acpi0.nexus0.root0
|
|
ppc0: <ECP parallel printer port> [tentative] port 0x778-0x77f,0x378-0x37f irq 5 drq 3 on acpi0
|
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
ppc0: FIFO with 16/16/9 bytes threshold
|
|
vm_page_alloc_contig: 16384k high 0000000000ffffff failed
|
|
contigmalloc_map: failed size 1024 low=0 high=ffffff align=1 boundary=65536 flags=00000601
|
|
isa_dmainit(3, 1024) failed
|
|
ppbus0.ppc0.acpi0.nexus0.root0
|
|
ppbus0: <Parallel port bus> [tentative] on ppc0
|
|
plip0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
plip0: <PLIP network interface> [tentative] on ppbus0
|
|
lp0: bpf attached
|
|
plip0: <PLIP network interface> [attached!] on ppbus0
|
|
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
lpt0: <Printer> [tentative] on ppbus0
|
|
lpt0: Interrupt-driven port
|
|
lpt0: <Printer> [attached!] on ppbus0
|
|
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
ppi0: <Parallel I/O> [tentative] on ppbus0
|
|
ppi0: <Parallel I/O> [attached!] on ppbus0
|
|
ppbus0: <Parallel port bus> [attached!] on ppc0
|
|
ppc0: <ECP parallel printer port> [attached!] port 0x778-0x77f,0x378-0x37f irq 5 drq 3 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: irq maps: 0xc09 0xc19 0xc09 0xc09
|
|
sio0.acpi0.nexus0.root0
|
|
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE1DBFEF400 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst0: non-C3 0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: create pkg domain0, coord 0xfe
|
|
cpu_pst0: control reg 127 0
|
|
cpu_pst0: status reg 127 0
|
|
cpu_pst0: freq 3300, pwr 55000, xlat 10, blat 10, cv 00002100, sv 00002100
|
|
cpu_pst0: freq 3200, pwr 52199, xlat 10, blat 10, cv 00002000, sv 00002000
|
|
cpu_pst0: freq 3100, pwr 49990, xlat 10, blat 10, cv 00001f00, sv 00001f00
|
|
cpu_pst0: freq 3000, pwr 47821, xlat 10, blat 10, cv 00001e00, sv 00001e00
|
|
cpu_pst0: freq 2800, pwr 43604, xlat 10, blat 10, cv 00001c00, sv 00001c00
|
|
cpu_pst0: freq 2700, pwr 41563, xlat 10, blat 10, cv 00001b00, sv 00001b00
|
|
cpu_pst0: freq 2600, pwr 39553, xlat 10, blat 10, cv 00001a00, sv 00001a00
|
|
cpu_pst0: freq 2500, pwr 37581, xlat 10, blat 10, cv 00001900, sv 00001900
|
|
cpu_pst0: freq 2400, pwr 35648, xlat 10, blat 10, cv 00001800, sv 00001800
|
|
cpu_pst0: freq 2300, pwr 33754, xlat 10, blat 10, cv 00001700, sv 00001700
|
|
cpu_pst0: freq 2200, pwr 31904, xlat 10, blat 10, cv 00001600, sv 00001600
|
|
cpu_pst0: freq 2100, pwr 30084, xlat 10, blat 10, cv 00001500, sv 00001500
|
|
cpu_pst0: freq 1900, pwr 26557, xlat 10, blat 10, cv 00001300, sv 00001300
|
|
cpu_pst0: freq 1800, pwr 24849, xlat 10, blat 10, cv 00001200, sv 00001200
|
|
cpu_pst0: freq 1700, pwr 23177, xlat 10, blat 10, cv 00001100, sv 00001100
|
|
cpu_pst0: freq 1600, pwr 21545, xlat 10, blat 10, cv 00001000, sv 00001000
|
|
cpu_pst0: _PPC 0
|
|
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
|
|
clockmod0.cpu0.acpi0.nexus0.root0
|
|
clockmod0: <CPU clock modulation> [tentative] on cpu0
|
|
clock modulation:
|
|
0x0000 100.00%
|
|
0x001f 93.75%
|
|
0x001e 87.50%
|
|
0x001d 81.25%
|
|
0x001c 75.00%
|
|
0x001b 68.75%
|
|
0x001a 62.50%
|
|
0x0019 56.25%
|
|
0x0018 50.00%
|
|
0x0017 43.75%
|
|
0x0016 37.50%
|
|
0x0015 31.25%
|
|
0x0014 25.00%
|
|
0x0013 18.75%
|
|
0x0012 12.50%
|
|
0x0011 6.25%
|
|
clockmod0: <CPU clock modulation> [attached!] on cpu0
|
|
perfbias0.cpu0.acpi0.nexus0.root0
|
|
perfbias0: <CPU perf-energy bias> [tentative] on cpu0
|
|
perfbias0: <CPU perf-energy bias> [attached!] on cpu0
|
|
coretemp0.cpu0.acpi0.nexus0.root0
|
|
coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
|
|
coretemp0: Tj(target) value 105 does not seem right.
|
|
coretemp0: Setting TjMax=100
|
|
coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE1E04A8280 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE033B196C0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst1: non-C3 0
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1.cpu1.acpi0.nexus0.root0
|
|
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
|
|
cpu_pst1: control reg 127 0
|
|
cpu_pst1: status reg 127 0
|
|
cpu_pst1: _PPC 0
|
|
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
|
|
clockmod1.cpu1.acpi0.nexus0.root0
|
|
clockmod1: <CPU clock modulation> [tentative] on cpu1
|
|
clockmod1: <CPU clock modulation> [attached!] on cpu1
|
|
perfbias1.cpu1.acpi0.nexus0.root0
|
|
perfbias1: <CPU perf-energy bias> [tentative] on cpu1
|
|
perfbias1: <CPU perf-energy bias> [attached!] on cpu1
|
|
coretemp1.cpu1.acpi0.nexus0.root0
|
|
coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
|
|
coretemp1: Tj(target) value 105 does not seem right.
|
|
coretemp1: Setting TjMax=100
|
|
coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst2.cpu2.acpi0.nexus0.root0
|
|
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst2: non-C3 0
|
|
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
|
|
cpu_pst2.cpu2.acpi0.nexus0.root0
|
|
cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
|
|
cpu_pst2: control reg 127 0
|
|
cpu_pst2: status reg 127 0
|
|
cpu_pst2: _PPC 0
|
|
cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
|
|
clockmod2.cpu2.acpi0.nexus0.root0
|
|
clockmod2: <CPU clock modulation> [tentative] on cpu2
|
|
clockmod2: <CPU clock modulation> [attached!] on cpu2
|
|
perfbias2.cpu2.acpi0.nexus0.root0
|
|
perfbias2: <CPU perf-energy bias> [tentative] on cpu2
|
|
perfbias2: <CPU perf-energy bias> [attached!] on cpu2
|
|
coretemp2.cpu2.acpi0.nexus0.root0
|
|
coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
|
|
coretemp2: Tj(target) value 105 does not seem right.
|
|
coretemp2: Setting TjMax=100
|
|
coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst3.cpu3.acpi0.nexus0.root0
|
|
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst3: non-C3 0
|
|
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
|
|
cpu_pst3.cpu3.acpi0.nexus0.root0
|
|
cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
|
|
cpu_pst3: control reg 127 0
|
|
cpu_pst3: status reg 127 0
|
|
cpu_pst3: _PPC 0
|
|
cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
|
|
clockmod3.cpu3.acpi0.nexus0.root0
|
|
clockmod3: <CPU clock modulation> [tentative] on cpu3
|
|
clockmod3: <CPU clock modulation> [attached!] on cpu3
|
|
perfbias3.cpu3.acpi0.nexus0.root0
|
|
perfbias3: <CPU perf-energy bias> [tentative] on cpu3
|
|
perfbias3: <CPU perf-energy bias> [attached!] on cpu3
|
|
coretemp3.cpu3.acpi0.nexus0.root0
|
|
coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
|
|
coretemp3: Tj(target) value 105 does not seem right.
|
|
coretemp3: Setting TjMax=100
|
|
coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ACPI: Enabled 4 GPEs in block 00 to 3F
|
|
acpi0: <ALASKA A M I> [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x72-0x7f,0x80,0x84-0x86,0x88,0x8c-0x8e,0x90-0x9f,0xa2-0xbf,0xe0-0xef,0x4d0-0x4d1,0x290-0x29f,0x454-0x457,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x680-0x69f,0x1000-0x100f,0xffff,0xffff,0x400-0x453,0x458-0x47f,0x500-0x57f,0x164e-0x164f iomem 0xfed1c000-0xfed1ffff,0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xff000000-0xffffffff,0xfee00000-0xfeefffff,0xf0100000-0xf0100fff,0xfed40000-0xfed44fff irq 9 on motherboard
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
ppc-: ppc0 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
|
|
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: failed to reset the keyboard.
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
|
|
cpu_cst: global Cx count 3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
|
|
psm0: current command byte:0065
|
|
psm0: strange result for test aux port (2).
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0: wbsio_probe port 0x2e: Device ID 0xc3, Rev 0x33
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
ppc1: cannot reserve I/O port range
|
|
ppc1: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
ppp0: bpf attached
|
|
sl0: bpf attached
|
|
hptrr: no controller detected.
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 6 busses
|
|
(probe0:ahci0:0:0:0): error 22
|
|
(probe0:ahci0:0:0:0): Unretryable Error
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe1:ahci0:1:0:0): error 22
|
|
(probe1:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe5:ahci0:5:0:0): error 22
|
|
(probe5:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: finished configuring all busses
|
|
pass0 at ahci0 bus 2 target 0 lun 0
|
|
pass0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
pass0: Serial Number WD-WX41E72JL513
|
|
pass0: 300.000MB/s transfers
|
|
pass1 at ahci0 bus 3 target 0 lun 0
|
|
pass1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
pass1: Serial Number WD-WXP1C42A2867
|
|
pass1: 300.000MB/s transfers
|
|
pass2 at ahci0 bus 4 target 0 lun 0
|
|
pass2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
pass2: Serial Number WD-WMAYP5624974
|
|
pass2: 300.000MB/s transfers
|
|
sg0 at ahci0 bus 2 target 0 lun 0
|
|
sg0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
sg0: Serial Number WD-WX41E72JL513
|
|
sg0: 300.000MB/s transfers
|
|
sg1 at ahci0 bus 3 target 0 lun 0
|
|
sg1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
sg1: Serial Number WD-WXP1C42A2867
|
|
sg1: 300.000MB/s transfers
|
|
sg2 at ahci0 bus 4 target 0 lun 0
|
|
sg2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
sg2: Serial Number WD-WMAYP5624974
|
|
sg2: 300.000MB/s transfers
|
|
No policy for da0 specified, or policy not found
|
|
disk scheduler: set policy of da0 to noop
|
|
da0: si_iosize_max:131072
|
|
No policy for da1 specified, or policy not found
|
|
disk scheduler: set policy of da1 to noop
|
|
da1: si_iosize_max:131072
|
|
No policy for da2 specified, or policy not found
|
|
disk scheduler: set policy of da2 to noop
|
|
da2: si_iosize_max:131072
|
|
da0 at ahci0 bus 2 target 0 lun 0
|
|
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number WD-WX41E72JL513
|
|
da0: 300.000MB/s transfers
|
|
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
|
|
da1 at ahci0 bus 3 target 0 lun 0
|
|
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
da1: Serial Number WD-WXP1C42A2867
|
|
da1: 300.000MB/s transfers
|
|
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
|
|
da2 at ahci0 bus 4 target 0 lun 0
|
|
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
da2: Serial Number WD-WMAYP5624974
|
|
da2: 300.000MB/s transfers
|
|
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
|
|
da0: type 0xa5, start 63, end = 488279609, size 488279547 : OK
|
|
da0: type 0xa5, start 488282112, end = 681641983, size 193359872
|
|
da0: C/H/S start 1023/39/46 (16501446) != start 488282112: invalid
|
|
da0: C/H/S end 1023/64/2 (16502977) != end 681641983: invalid
|
|
da0: type 0xa6, start 681641984, end = 875001855, size 193359872
|
|
da0: C/H/S start 1023/64/3 (16502978) != start 681641984: invalid
|
|
da0: C/H/S end 1023/88/22 (16504509) != end 875001855: invalid
|
|
da0: type 0x5, start 875003902, end = 1465147391, size 590143490
|
|
da0: C/H/S start 1023/120/53 (16506556) != start 875003902: invalid
|
|
da0: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
|
|
da0: type 0x83, start 875003904, end = 1070313471, size 195309568
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 875003904: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1070313471: invalid
|
|
da0<extended>: type 0x5, start 1070314560, end = 1136719871, size 66405312
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1070314560: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
|
|
da0: type 0x82, start 1070315520, end = 1136719871, size 66404352
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1070315520: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
|
|
da0<extended>: type 0x5, start 1136719872, end = 1302734847, size 166014976
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1136719872: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
|
|
da0: type 0x83, start 1136721920, end = 1302734847, size 166012928
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1136721920: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
|
|
da0<extended>: type 0x5, start 1302734848, end = 1458984959, size 156250112
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1302734848: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
|
|
da0: type 0x83, start 1302736896, end = 1458984959, size 156248064
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1302736896: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
|
|
da0<extended>: type 0x5, start 1458984960, end = 1465147391, size 6162432
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1458984960: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da0: type 0x83, start 1458987008, end = 1465147391, size 6160384
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1458987008: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da1: type 0xa5, start 63, end = 468744569, size 468744507 : OK
|
|
da1: type 0xa6, start 468750336, end = 662110207, size 193359872
|
|
da1: C/H/S start 1023/91/34 (16504710) != start 468750336: invalid
|
|
da1: C/H/S end 1023/115/53 (16506241) != end 662110207: invalid
|
|
da1: type 0xa9, start 662110208, end = 855470079, size 193359872
|
|
da1: C/H/S start 1023/115/54 (16506242) != start 662110208: invalid
|
|
da1: C/H/S end 1023/140/10 (16507773) != end 855470079: invalid
|
|
da1: type 0x5, start 855472126, end = 1465147391, size 609675266
|
|
da1: C/H/S start 1023/172/41 (16509820) != start 855472126: invalid
|
|
da1: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
|
|
da1: type 0x83, start 855472128, end = 1048829951, size 193357824
|
|
da1: C/H/S start 0/0/3 (2) != start 855472128: invalid
|
|
da1: C/H/S end 1023/246/53 (16514494) != end 1048829951: invalid
|
|
da1<extended>: type 0x5, start 1048829952, end = 1115236351, size 66406400
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1048829952: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1115236351: invalid
|
|
uhub2: 6 ports with 6 removable, self powered
|
|
da1: type 0x82, start 1048832000, end = 1115236351, size 66404352
|
|
da1: C/H/S start 0/32/33 (2048) != start 1048832000: invalid
|
|
da1: C/H/S end 1023/154/53 (16508698) != end 1115236351: invalid
|
|
da1<extended>: type 0x5, start 1115236352, end = 1291018239, size 175781888
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1115236352: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1291018239: invalid
|
|
da1: type 0x83, start 1115238400, end = 1291018239, size 175779840
|
|
da1: C/H/S start 0/32/33 (2048) != start 1115238400: invalid
|
|
da1: C/H/S end 1023/233/44 (16513666) != end 1291018239: invalid
|
|
da1<extended>: type 0x5, start 1291018240, end = 1457033215, size 166014976
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1291018240: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1457033215: invalid
|
|
da1: type 0x83, start 1291020288, end = 1457033215, size 166012928
|
|
da1: C/H/S start 0/32/33 (2048) != start 1291020288: invalid
|
|
da1: C/H/S end 1023/243/22 (16514274) != end 1457033215: invalid
|
|
da1<extended>: type 0x5, start 1457033216, end = 1465147391, size 8114176
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1457033216: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da1: type 0x83, start 1457035264, end = 1465147391, size 8112128
|
|
da1: C/H/S start 0/32/33 (2048) != start 1457035264: invalid
|
|
da1: C/H/S end 505/21/28 (8145990) != end 1465147391: invalid
|
|
da2: type 0xa5, start 63, end = 195318269, size 195318207
|
|
da2: C/H/S end 1023/254/63 (16515008) != end 195318269: invalid
|
|
da2: type 0xa9, start 195318270, end = 429690554, size 234372285
|
|
da2: C/H/S start 1023/0/1 (16498944) != start 195318270: invalid
|
|
da2: C/H/S end 1023/254/63 (16515008) != end 429690554: invalid
|
|
da2: type 0xa5, start 429690555, end = 976768064, size 547077510 : OK
|
|
uhub3: 8 ports with 8 removable, self powered
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:serno/WD-WMAYP5624974.s3d
|
|
HAMMER(ROOT) recovery check seqno=81116ea9
|
|
HAMMER(ROOT) recovery range 3000000013a0d8d0-3000000013a0d8d0
|
|
HAMMER(ROOT) recovery nexto 3000000013a0d8d0 endseqno=81116eaa
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 13872k, remaining available: 65536k
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
kthread 0xffffffe0a4c8b600 syncer6 has exited
|
|
kthread 0xffffffe0a4c8bb80 syncer7 has exited
|
|
kthread 0xffffffe1dc229a80 syncer8 has exited
|
|
kthread 0xffffffe209851380 syncer9 has exited
|
|
kthread 0xffffffe0a4c8bb80 syncer10 has exited
|
|
kthread 0xffffffe0a4c8c100 syncer11 has exited
|
|
kthread 0xffffffe1dc229a80 syncer12 has exited
|
|
re0: adjust device control 0x2000 -> 0x5000
|
|
boot() called on cpu#2
|
|
Switching to cpu #0 for shutdown
|
|
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
|
|
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
|
|
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
|
|
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
|
|
Copyright (c) 2003-2014 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
Slab ZoneSize set to 128KB
|
|
Leaving critical section, allowing interrupts
|
|
ACPI SDT: RSDP not in EBDA
|
|
ACPI SDT: RSDP in BIOS mem
|
|
ACPI FADT: SCI irq 9, conform/conform
|
|
DragonFly v3.9.0.176.gd39a9c-DEVELOPMENT #3: Sat Jun 28 11:09:47 PDT 2014
|
|
shasta@:/usr/obj/usr/src/sys/X86_64_GENERIC
|
|
Calibrating clock(s) ...
|
|
TSC invariant clock: 3300017432 Hz, i8254 clock: 1193180 Hz
|
|
CLK_USE_I8254_CALIBRATION not specified - using default frequency
|
|
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
|
|
CPU: Intel(R) Core(TM) i3-3225 CPU @ 3.30GHz (3300.04-MHz K8-class CPU)
|
|
Origin = "GenuineIntel" Id = 0x306a9 Stepping = 9
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x359ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,AVX,F16C>
|
|
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
|
|
AMD Features2=0x1<LAHF>
|
|
Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
|
|
Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
|
|
MONITOR/MWAIT Features=0x3<CST,INTBRK>
|
|
npx mask: 0x0000ffff
|
|
real memory = 17132029952 (16338 MB)
|
|
Physical memory chunk(s):
|
|
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
|
|
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
|
|
0x02740000 - 0xdd77ffff, 3674472448 bytes (897088 pages)
|
|
0xddf60000 - 0xddfbffff, 393216 bytes (96 pages)
|
|
0xde900000 - 0xdf39ffff, 11141120 bytes (2720 pages)
|
|
0x100000000 - 0x41efdffff, 13404864512 bytes (3272672 pages)
|
|
avail memory = 16185872384 (15436 MB)
|
|
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
|
|
ACPI MADT: BSP apic id 0
|
|
ACPI MADT: cpu id 1, apic id 0
|
|
ACPI MADT: cpu id 2, apic id 2
|
|
ACPI MADT: cpu id 3, apic id 1
|
|
ACPI MADT: cpu id 4, apic id 3
|
|
lapic: divisor index 0, frequency 50000549 Hz
|
|
SMP: CPU0 apic_initialize():
|
|
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: Waiting APs LAPIC initialization
|
|
SMP: CPU2 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU3 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
SMP: CPU1 apic_initialize():
|
|
lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
|
|
ACPI MADT: warning invalid intsrc irq 9 trig, level
|
|
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
|
|
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
|
|
ACPI MADT: SCI irq 9, first test level/high
|
|
IOAPIC: idx 0, apic id 4, gsi base 0, npin 24
|
|
IOAPIC: irq 1, gsi 1 -> cpu1 (auto)
|
|
IOAPIC: irq 1 -> gsi 1 edge/high
|
|
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
|
|
IOAPIC: irq 0 -> gsi 2 edge/high
|
|
IOAPIC: irq 3, gsi 3 -> cpu3 (auto)
|
|
IOAPIC: irq 3 -> gsi 3 edge/high
|
|
IOAPIC: irq 4, gsi 4 -> cpu0 (auto)
|
|
IOAPIC: irq 4 -> gsi 4 edge/high
|
|
IOAPIC: irq 5, gsi 5 -> cpu1 (auto)
|
|
IOAPIC: irq 5 -> gsi 5 edge/high
|
|
IOAPIC: irq 6, gsi 6 -> cpu2 (auto)
|
|
IOAPIC: irq 6 -> gsi 6 edge/high
|
|
IOAPIC: irq 7, gsi 7 -> cpu3 (auto)
|
|
IOAPIC: irq 7 -> gsi 7 edge/high
|
|
IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
|
|
IOAPIC: irq 8 -> gsi 8 edge/high
|
|
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
|
|
IOAPIC: irq 9 -> gsi 9 edge/high
|
|
IOAPIC: irq 10, gsi 10 -> cpu2 (auto)
|
|
IOAPIC: irq 10 -> gsi 10 edge/high
|
|
IOAPIC: irq 11, gsi 11 -> cpu3 (auto)
|
|
IOAPIC: irq 11 -> gsi 11 edge/high
|
|
IOAPIC: irq 12, gsi 12 -> cpu0 (auto)
|
|
IOAPIC: irq 12 -> gsi 12 edge/high
|
|
IOAPIC: irq 13, gsi 13 -> cpu1 (auto)
|
|
IOAPIC: irq 13 -> gsi 13 edge/high
|
|
IOAPIC: irq 14, gsi 14 -> cpu2 (auto)
|
|
IOAPIC: irq 14 -> gsi 14 edge/high
|
|
IOAPIC: irq 15, gsi 15 -> cpu3 (auto)
|
|
IOAPIC: irq 15 -> gsi 15 edge/high
|
|
IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
|
|
IOAPIC: irq 16 -> gsi 16 level/low
|
|
IOAPIC: irq 17, gsi 17 -> cpu1 (auto)
|
|
IOAPIC: irq 17 -> gsi 17 level/low
|
|
IOAPIC: irq 18, gsi 18 -> cpu2 (auto)
|
|
IOAPIC: irq 18 -> gsi 18 level/low
|
|
IOAPIC: irq 19, gsi 19 -> cpu3 (auto)
|
|
IOAPIC: irq 19 -> gsi 19 level/low
|
|
IOAPIC: irq 20, gsi 20 -> cpu0 (auto)
|
|
IOAPIC: irq 20 -> gsi 20 level/low
|
|
IOAPIC: irq 21, gsi 21 -> cpu1 (auto)
|
|
IOAPIC: irq 21 -> gsi 21 level/low
|
|
IOAPIC: irq 22, gsi 22 -> cpu2 (auto)
|
|
IOAPIC: irq 22 -> gsi 22 level/low
|
|
IOAPIC: irq 23, gsi 23 -> cpu3 (auto)
|
|
IOAPIC: irq 23 -> gsi 23 level/low
|
|
IOAPIC: cpu0 irq 1 reserved
|
|
IOAPIC: cpu0 irq 2 reserved
|
|
IOAPIC: cpu0 irq 3 reserved
|
|
IOAPIC: cpu0 irq 5 reserved
|
|
IOAPIC: cpu0 irq 6 reserved
|
|
IOAPIC: cpu0 irq 7 reserved
|
|
IOAPIC: cpu0 irq 10 reserved
|
|
IOAPIC: cpu0 irq 11 reserved
|
|
IOAPIC: cpu0 irq 13 reserved
|
|
IOAPIC: cpu0 irq 14 reserved
|
|
IOAPIC: cpu0 irq 15 reserved
|
|
IOAPIC: cpu1 irq 0 reserved
|
|
IOAPIC: cpu1 irq 2 reserved
|
|
IOAPIC: cpu1 irq 3 reserved
|
|
IOAPIC: cpu1 irq 4 reserved
|
|
IOAPIC: cpu1 irq 6 reserved
|
|
IOAPIC: cpu1 irq 7 reserved
|
|
IOAPIC: cpu1 irq 8 reserved
|
|
IOAPIC: cpu1 irq 9 reserved
|
|
IOAPIC: cpu1 irq 10 reserved
|
|
IOAPIC: cpu1 irq 11 reserved
|
|
IOAPIC: cpu1 irq 12 reserved
|
|
IOAPIC: cpu1 irq 14 reserved
|
|
IOAPIC: cpu1 irq 15 reserved
|
|
IOAPIC: cpu2 irq 0 reserved
|
|
IOAPIC: cpu2 irq 1 reserved
|
|
IOAPIC: cpu2 irq 2 reserved
|
|
IOAPIC: cpu2 irq 3 reserved
|
|
IOAPIC: cpu2 irq 4 reserved
|
|
IOAPIC: cpu2 irq 5 reserved
|
|
IOAPIC: cpu2 irq 7 reserved
|
|
IOAPIC: cpu2 irq 8 reserved
|
|
IOAPIC: cpu2 irq 9 reserved
|
|
IOAPIC: cpu2 irq 11 reserved
|
|
IOAPIC: cpu2 irq 12 reserved
|
|
IOAPIC: cpu2 irq 13 reserved
|
|
IOAPIC: cpu2 irq 15 reserved
|
|
IOAPIC: cpu3 irq 0 reserved
|
|
IOAPIC: cpu3 irq 1 reserved
|
|
IOAPIC: cpu3 irq 2 reserved
|
|
IOAPIC: cpu3 irq 4 reserved
|
|
IOAPIC: cpu3 irq 5 reserved
|
|
IOAPIC: cpu3 irq 6 reserved
|
|
IOAPIC: cpu3 irq 8 reserved
|
|
IOAPIC: cpu3 irq 9 reserved
|
|
IOAPIC: cpu3 irq 10 reserved
|
|
IOAPIC: cpu3 irq 12 reserved
|
|
IOAPIC: cpu3 irq 13 reserved
|
|
IOAPIC: cpu3 irq 14 reserved
|
|
IOAPIC: legacy irq max 24
|
|
ELCR Found. ISA IRQs programmed as:
|
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|
|
E E E L E E E E E E L L E E E E
|
|
MPTABLE: 0:31 INTA -> IOAPIC 0.21
|
|
MPTABLE: 0:31 INTB -> IOAPIC 0.19
|
|
MPTABLE: 0:31 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:31 INTD -> IOAPIC 0.16
|
|
MPTABLE: 0:20 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:29 INTA -> IOAPIC 0.23
|
|
MPTABLE: 0:29 INTB -> IOAPIC 0.19
|
|
MPTABLE: 0:29 INTC -> IOAPIC 0.16
|
|
MPTABLE: 0:29 INTD -> IOAPIC 0.18
|
|
MPTABLE: 0:26 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:26 INTB -> IOAPIC 0.21
|
|
MPTABLE: 0:26 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:26 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:27 INTA -> IOAPIC 0.22
|
|
MPTABLE: 0:25 INTA -> IOAPIC 0.20
|
|
MPTABLE: 0:22 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:22 INTB -> IOAPIC 0.19
|
|
MPTABLE: 0:22 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:22 INTD -> IOAPIC 0.17
|
|
MPTABLE: 0:28 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:28 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:28 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:28 INTD -> IOAPIC 0.19
|
|
MPTABLE: 2:0 INTA -> IOAPIC 0.17
|
|
MPTABLE: 2:0 INTB -> IOAPIC 0.18
|
|
MPTABLE: 2:0 INTC -> IOAPIC 0.19
|
|
MPTABLE: 2:0 INTD -> IOAPIC 0.16
|
|
MPTABLE: 3:0 INTA -> IOAPIC 0.18
|
|
MPTABLE: 3:0 INTB -> IOAPIC 0.19
|
|
MPTABLE: 3:0 INTC -> IOAPIC 0.16
|
|
MPTABLE: 3:0 INTD -> IOAPIC 0.17
|
|
MPTABLE: 4:0 INTA -> IOAPIC 0.19
|
|
MPTABLE: 4:0 INTB -> IOAPIC 0.16
|
|
MPTABLE: 4:0 INTC -> IOAPIC 0.17
|
|
MPTABLE: 4:0 INTD -> IOAPIC 0.18
|
|
MPTABLE: 0:1 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:1 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:1 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:1 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:6 INTA -> IOAPIC 0.19
|
|
MPTABLE: 0:6 INTB -> IOAPIC 0.16
|
|
MPTABLE: 0:6 INTC -> IOAPIC 0.17
|
|
MPTABLE: 0:6 INTD -> IOAPIC 0.18
|
|
MPTABLE: 0:4 INTA -> IOAPIC 0.16
|
|
MPTABLE: 0:4 INTB -> IOAPIC 0.17
|
|
MPTABLE: 0:4 INTC -> IOAPIC 0.18
|
|
MPTABLE: 0:4 INTD -> IOAPIC 0.19
|
|
MPTABLE: 6:0 INTA -> IOAPIC 0.17
|
|
MPTABLE: 6:0 INTB -> IOAPIC 0.18
|
|
MPTABLE: 6:0 INTC -> IOAPIC 0.19
|
|
MPTABLE: 6:0 INTD -> IOAPIC 0.16
|
|
MPTABLE: 5:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 5:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 5:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 5:0 INTD -> IOAPIC 0.19
|
|
MPTABLE: 0:2 INTA -> IOAPIC 0.16
|
|
MPTABLE: 7:0 INTA -> IOAPIC 0.17
|
|
MPTABLE: 7:0 INTB -> IOAPIC 0.18
|
|
MPTABLE: 7:0 INTC -> IOAPIC 0.19
|
|
MPTABLE: 7:0 INTD -> IOAPIC 0.16
|
|
MPTABLE: 7:1 INTA -> IOAPIC 0.18
|
|
MPTABLE: 7:1 INTB -> IOAPIC 0.19
|
|
MPTABLE: 7:1 INTC -> IOAPIC 0.16
|
|
MPTABLE: 7:1 INTD -> IOAPIC 0.17
|
|
MPTABLE: 1:0 INTA -> IOAPIC 0.16
|
|
MPTABLE: 1:0 INTB -> IOAPIC 0.17
|
|
MPTABLE: 1:0 INTC -> IOAPIC 0.18
|
|
MPTABLE: 1:0 INTD -> IOAPIC 0.19
|
|
Initialize MI interrupts
|
|
MWAIT hints (2 C1 hints):
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
MWAIT deep hints:
|
|
C1/0 hint 0x0000
|
|
C1/1 hint 0x0001
|
|
C2/0 hint 0x0010
|
|
C3/0 hint 0x0020
|
|
objcache: magazine cap [6, 134]
|
|
Finish MP startup
|
|
Active CPU Mask: 000000000000000f
|
|
TSC testing MP synchronization ...
|
|
TSC is MP synchronized, after 63142 tries
|
|
TSC: cputimer freq 103126312, shift 5
|
|
Preloaded elf kernel "kernel" at 0xffffffff82042000.
|
|
Preloaded elf obj module "acpi.ko" at 0xffffffff82042430.
|
|
Preloaded elf obj module "ehci.ko" at 0xffffffff82042dc8.
|
|
Bits within APICID: logical_CPU_bits: 1; core_bits: 3
|
|
CPU Topology: cores_per_chip: 2; threads_per_core: 2; chips_per_package: 1;
|
|
start dummy scheduler helpers on cpus: 0 1 2 3
|
|
Start scheduler helpers on cpus:
|
|
cpu0 - HyperThreading available. Core siblings: cpu0 cpu2
|
|
cpu1 - HyperThreading available. Core siblings: cpu1 cpu3
|
|
cpu2 - HyperThreading available. Core siblings: cpu0 cpu2
|
|
cpu3 - HyperThreading available. Core siblings: cpu1 cpu3
|
|
Start scheduler helpers on cpus:
|
|
cpu0 - HyperThreading available. Core siblings: cpu0 cpu2
|
|
cpu1 - HyperThreading available. Core siblings: cpu1 cpu3
|
|
cpu2 - HyperThreading available. Core siblings: cpu0 cpu2
|
|
cpu3 - HyperThreading available. Core siblings: cpu1 cpu3
|
|
FQ scheduler policy version 1.1 loaded
|
|
wdog: In-kernel automatic watchdog reset enabled
|
|
wlan: <802.11 Link Layer>
|
|
ath_rate: <SampleRate bit-rate selection algorithm>
|
|
ath_dfs: WTF module
|
|
kbd: new array size 4
|
|
kbd1 at kbdmux0
|
|
crypto: <crypto core>
|
|
No policy for md0 specified, or policy not found
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
md0: invalid primary partition table: no magic
|
|
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
|
|
hpt27xx: RocketRAID 27xx controller driver v1.0 (Jun 28 2014 11:07:10)
|
|
IOAPIC: rman cpu0 0 - 0
|
|
IOAPIC: rman cpu0 4 - 4
|
|
IOAPIC: rman cpu0 8 - 9
|
|
IOAPIC: rman cpu0 12 - 12
|
|
IOAPIC: rman cpu0 16 - 95
|
|
IOAPIC: rman cpu0 97 - 191
|
|
IOAPIC: rman cpu1 1 - 1
|
|
IOAPIC: rman cpu1 5 - 5
|
|
IOAPIC: rman cpu1 13 - 13
|
|
IOAPIC: rman cpu1 16 - 95
|
|
IOAPIC: rman cpu1 97 - 191
|
|
IOAPIC: rman cpu2 6 - 6
|
|
IOAPIC: rman cpu2 10 - 10
|
|
IOAPIC: rman cpu2 14 - 14
|
|
IOAPIC: rman cpu2 16 - 95
|
|
IOAPIC: rman cpu2 97 - 191
|
|
IOAPIC: rman cpu3 3 - 3
|
|
IOAPIC: rman cpu3 7 - 7
|
|
IOAPIC: rman cpu3 11 - 11
|
|
IOAPIC: rman cpu3 15 - 95
|
|
IOAPIC: rman cpu3 97 - 191
|
|
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
|
|
ACPI: XSDT 0x00000000DE058080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
|
|
ACPI: FACP 0x00000000DE061F58 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
|
|
ACPI: DSDT 0x00000000DE0581A0 009DB4 (v02 ALASKA A M I 00000022 INTL 20051117)
|
|
ACPI: FACS 0x00000000DE072080 000040
|
|
ACPI: APIC 0x00000000DE062068 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
|
|
ACPI: FPDT 0x00000000DE0620E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
|
|
ACPI: ASF! 0x00000000DE062128 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
|
|
ACPI: MCFG 0x00000000DE0621D0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
|
|
ACPI: SSDT 0x00000000DE062210 0007E1 (v01 Intel_ AoacTabl 00001000 INTL 20091112)
|
|
ACPI: AAFT 0x00000000DE0629F8 0000EA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
|
|
ACPI: HPET 0x00000000DE062AE8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
|
|
ACPI: SSDT 0x00000000DE062B20 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
|
|
ACPI: SSDT 0x00000000DE062E90 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
|
|
ACPI: SSDT 0x00000000DE063840 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
|
|
ACPI: BGRT 0x00000000DE0642D8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
|
|
cryptosoft0.nexus0.root0
|
|
cryptosoft0: <software crypto> [tentative] on motherboard
|
|
crypto: assign cryptosoft0 driver id 0, flags 234881024
|
|
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
|
|
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
|
|
cryptosoft0: <software crypto> [attached!] on motherboard
|
|
aesni0: No AESNI support.
|
|
padlock0: No ACE support.
|
|
rdrand0: No RdRand support.
|
|
acpi0.nexus0.root0
|
|
acpi0: <ALASKA A M I> [tentative] on motherboard
|
|
ACPI: All ACPI Tables successfully acquired
|
|
PCIe: Memory Mapped configuration base @ 0xf8000000, bus [0, 63]
|
|
PCIe: Using Memory Mapped configuration
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
ACPI FADT: SCI testing level/high
|
|
IOAPIC: irq 9, gsi 9 edge/high -> level/high
|
|
ACPI FADT: SCI select level/high
|
|
ACPI: Executed 1 blocks of module-level executable AML code
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
unknown: not probed (disabled)
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
ACPI timer looks GOOD min = 2, max = 3, width = 1
|
|
acpi_timer0.acpi0.nexus0.root0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x408-0x40b on acpi0
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x408-0x40b on acpi0
|
|
acpi_hpet0.acpi0.nexus0.root0
|
|
acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
|
|
acpi_hpet0: vend: 0x8086, rev: 0x1, num: 7, opts: legacy_route 64-bit
|
|
acpi_hpet0: frequency 14318180
|
|
acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
pci_link0: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link1: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link2: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link3: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link4: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link5: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link6: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 3 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pci_link7: Index IRQ Rtd Ref IRQs
|
|
Initial Probe 0 3 N 0 3 4 5 6 10 11 12 14 15
|
|
Validation 0 3 N 0 3 4 5 6 10 11 12 14 15
|
|
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
|
|
pcib0.acpi0.nexus0.root0
|
|
pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
|
|
pci0.pcib0.acpi0.nexus0.root0
|
|
pci0: <ACPI PCI bus> [tentative] on pcib0
|
|
pci0: domain=0, physical bus=0
|
|
found-> vendor=0x8086, dev=0x0150, revid=0x09
|
|
domain=0, bus=0, slot=0, func=0
|
|
class=06-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x1e31, revid=0x04
|
|
domain=0, bus=0, slot=20, func=0
|
|
class=0c-03-30, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 8 messages, 64 bit
|
|
map[10]: type Memory, range 64, base 0xf7f00000, size 16, enabled
|
|
pcib0: matched entry for 0.20.INTA
|
|
pcib0: slot 20 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x1e3a, revid=0x04
|
|
domain=0, bus=0, slot=22, func=0
|
|
class=07-80-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
map[10]: type Memory, range 64, base 0xf7f1a000, size 4, enabled
|
|
pcib0: matched entry for 0.22.INTA
|
|
pcib0: slot 22 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x1e2d, revid=0x04
|
|
domain=0, bus=0, slot=26, func=0
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f18000, size 10, enabled
|
|
pcib0: matched entry for 0.26.INTA
|
|
pcib0: slot 26 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x1e20, revid=0x04
|
|
domain=0, bus=0, slot=27, func=0
|
|
class=04-03-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=3
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.1 cap=0x0091[ROOTDEV]
|
|
map[10]: type Memory, range 64, base 0xf7f10000, size 14, enabled
|
|
pcib0: matched entry for 0.27.INTA
|
|
pcib0: slot 27 INTA hardwired to GSI 22, IRQ 22
|
|
found-> vendor=0x8086, dev=0x1e10, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=0
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0004b200
|
|
pcib0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x1e12, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=1
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x000cb200
|
|
pcib0: matched entry for 0.28.INTB
|
|
pcib0: slot 28 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0x1e14, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=2
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0014b200
|
|
pcib0: matched entry for 0.28.INTC
|
|
pcib0: slot 28 INTC hardwired to GSI 18, IRQ 18
|
|
found-> vendor=0x8086, dev=0x1e16, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=3
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns)
|
|
intpin=d, irq=10
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x001cb200
|
|
pcib0: matched entry for 0.28.INTD
|
|
pcib0: slot 28 INTD hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0x1e18, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=4
|
|
class=06-04-00, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024b200
|
|
pcib0: matched entry for 0.28.INTA
|
|
pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
|
|
found-> vendor=0x8086, dev=0x244e, revid=0xc4
|
|
domain=0, bus=0, slot=28, func=5
|
|
class=06-04-01, hdrtype=0x01, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 2 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x002cb200
|
|
pcib0: matched entry for 0.28.INTB
|
|
pcib0: slot 28 INTB hardwired to GSI 17, IRQ 17
|
|
found-> vendor=0x8086, dev=0x1e26, revid=0x04
|
|
domain=0, bus=0, slot=29, func=0
|
|
class=0c-03-20, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=3
|
|
powerspec 2 supports D0 D3 current D0
|
|
map[10]: type Memory, range 32, base 0xf7f17000, size 10, enabled
|
|
pcib0: matched entry for 0.29.INTA
|
|
pcib0: slot 29 INTA hardwired to GSI 23, IRQ 23
|
|
found-> vendor=0x8086, dev=0x1e44, revid=0x04
|
|
domain=0, bus=0, slot=31, func=0
|
|
class=06-01-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
found-> vendor=0x8086, dev=0x1e02, revid=0x04
|
|
domain=0, bus=0, slot=31, func=2
|
|
class=01-06-01, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=10
|
|
powerspec 3 supports D0 D3 current D0
|
|
MSI supports 1 message
|
|
map[10]: type I/O Port, range 32, base 0xf070, size 3, enabled
|
|
map[14]: type I/O Port, range 32, base 0xf060, size 2, enabled
|
|
map[18]: type I/O Port, range 32, base 0xf050, size 3, enabled
|
|
map[1c]: type I/O Port, range 32, base 0xf040, size 2, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf020, size 5, enabled
|
|
map[24]: type Memory, range 32, base 0xf7f16000, size 11, enabled
|
|
pcib0: matched entry for 0.31.INTB
|
|
pcib0: slot 31 INTB hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x8086, dev=0x1e22, revid=0x04
|
|
domain=0, bus=0, slot=31, func=3
|
|
class=0c-05-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=c, irq=10
|
|
map[10]: type Memory, range 64, base 0xf7f15000, size 8, enabled
|
|
map[20]: type I/O Port, range 32, base 0xf000, size 5, enabled
|
|
pcib0: matched entry for 0.31.INTC
|
|
pcib0: slot 31 INTC hardwired to GSI 18, IRQ 18
|
|
pci0: <serial bus, USB> (vendor 0x8086, dev 0x1e31) at device 20.0 irq 16
|
|
pci0: <simple comms> (vendor 0x8086, dev 0x1e3a) at device 22.0 irq 16
|
|
ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci0: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0
|
|
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f18000
|
|
usbus0: waiting for BIOS to give up control
|
|
usbus0: EHCI version 1.0
|
|
usbus0.ehci0.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus0: <Intel Panther Point USB 2.0 controller> [tentative] on ehci0
|
|
usbus0: <Intel Panther Point USB 2.0 controller> [attached!] on ehci0
|
|
ehci0: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0
|
|
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x1e20) at device 27.0 irq 22
|
|
pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
|
|
pcib1: domain 0
|
|
pcib1: secondary bus 1
|
|
pcib1: subordinate bus 1
|
|
pcib1: I/O decode 0xf000-0xfff
|
|
pcib1: no prefetched decode
|
|
pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
|
|
pci1: <ACPI PCI bus> [tentative] on pcib1
|
|
pci1: domain=0, physical bus=1
|
|
pci1: <ACPI PCI bus> [attached!] on pcib1
|
|
pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
|
|
pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib2: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 28.1 on pci0
|
|
pcib2: domain 0
|
|
pcib2: secondary bus 2
|
|
pcib2: subordinate bus 2
|
|
pcib2: I/O decode 0xf000-0xfff
|
|
pcib2: no prefetched decode
|
|
pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
|
|
pci2: <ACPI PCI bus> [tentative] on pcib2
|
|
pci2: domain=0, physical bus=2
|
|
pci2: <ACPI PCI bus> [attached!] on pcib2
|
|
pcib2: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 28.1 on pci0
|
|
pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib3: <ACPI PCI-PCI bridge> [tentative] irq 18 at device 28.2 on pci0
|
|
pcib3: domain 0
|
|
pcib3: secondary bus 3
|
|
pcib3: subordinate bus 3
|
|
pcib3: I/O decode 0xf000-0xfff
|
|
pcib3: no prefetched decode
|
|
pci3.pcib3.pci0.pcib0.acpi0.nexus0.root0
|
|
pci3: <ACPI PCI bus> [tentative] on pcib3
|
|
pci3: domain=0, physical bus=3
|
|
pci3: <ACPI PCI bus> [attached!] on pcib3
|
|
pcib3: <ACPI PCI-PCI bridge> [attached!] irq 18 at device 28.2 on pci0
|
|
pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib4: <ACPI PCI-PCI bridge> [tentative] irq 19 at device 28.3 on pci0
|
|
pcib4: domain 0
|
|
pcib4: secondary bus 4
|
|
pcib4: subordinate bus 4
|
|
pcib4: I/O decode 0xe000-0xefff
|
|
pcib4: memory decode 0xf7e00000-0xf7efffff
|
|
pcib4: prefetched decode 0xe0000000-0xefffffff
|
|
pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
pci4: <ACPI PCI bus> [tentative] on pcib4
|
|
pci4: domain=0, physical bus=4
|
|
found-> vendor=0x1002, dev=0x9540, revid=0x00
|
|
domain=0, bus=4, slot=0, func=0
|
|
class=03-00-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=10
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
|
|
pcib4: requested memory range 0xe0000000-0xefffffff: good
|
|
map[18]: type Memory, range 64, base 0xf7e20000, size 16, enabled
|
|
pcib4: requested memory range 0xf7e20000-0xf7e2ffff: good
|
|
map[20]: type I/O Port, range 32, base 0xe000, size 8, enabled
|
|
pcib4: requested I/O range 0xe000-0xe0ff: in range
|
|
pcib4: matched entry for 4.0.INTA
|
|
pcib4: slot 0 INTA hardwired to GSI 19, IRQ 19
|
|
found-> vendor=0x1002, dev=0xaa38, revid=0x00
|
|
domain=0, bus=4, slot=0, func=1
|
|
class=04-03-00, hdrtype=0x00, mfdev=1
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=b, irq=11
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
PCI Express ver.2 cap=0x0012[LEGDEV]
|
|
map[10]: type Memory, range 64, base 0xf7e30000, size 14, enabled
|
|
pcib4: requested memory range 0xf7e30000-0xf7e33fff: good
|
|
pcib4: matched entry for 4.0.INTB
|
|
pcib4: slot 0 INTB hardwired to GSI 16, IRQ 16
|
|
vgapci0.pci4.pcib4.pci0.pcib0.acpi0.nexus0.root0
|
|
vgapci0: <VGA-compatible display> [tentative] port 0xe000-0xe0ff mem 0xf7e20000-0xf7e2ffff,0xe0000000-0xefffffff irq 19 at device 0.0 on pci4
|
|
vgapci0: Boot video device
|
|
vgapci0: <VGA-compatible display> [attached!] port 0xe000-0xe0ff mem 0xf7e20000-0xf7e2ffff,0xe0000000-0xefffffff irq 19 at device 0.0 on pci4
|
|
pci4: <multimedia, HDA> (vendor 0x1002, dev 0xaa38) at device 0.1 irq 16
|
|
pci4: <ACPI PCI bus> [attached!] on pcib4
|
|
pcib4: <ACPI PCI-PCI bridge> [attached!] irq 19 at device 28.3 on pci0
|
|
pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib5: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.4 on pci0
|
|
pcib5: domain 0
|
|
pcib5: secondary bus 5
|
|
pcib5: subordinate bus 5
|
|
pcib5: I/O decode 0xd000-0xdfff
|
|
pcib5: prefetched decode 0xf0000000-0xf00fffff
|
|
pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
pci5: <ACPI PCI bus> [tentative] on pcib5
|
|
pci5: domain=0, physical bus=5
|
|
found-> vendor=0x10ec, dev=0x8168, revid=0x06
|
|
domain=0, bus=5, slot=0, func=0
|
|
class=02-00-00, hdrtype=0x00, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
powerspec 3 supports D0 D1 D2 D3 current D0
|
|
MSI supports 1 message, 64 bit
|
|
MSI-X supports 4 messages in map 0x20
|
|
PCI Express ver.2 cap=0x0202[DEVICE]
|
|
map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled
|
|
pcib5: requested I/O range 0xd000-0xd0ff: in range
|
|
map[18]: type Prefetchable Memory, range 64, base 0xf0004000, size 12, enabled
|
|
pcib5: requested memory range 0xf0004000-0xf0004fff: good
|
|
map[20]: type Prefetchable Memory, range 64, base 0xf0000000, size 14, enabled
|
|
pcib5: requested memory range 0xf0000000-0xf0003fff: good
|
|
pcib5: matched entry for 5.0.INTA
|
|
pcib5: slot 0 INTA hardwired to GSI 16, IRQ 16
|
|
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
|
|
re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [tentative] port 0xd000-0xd0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci5
|
|
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf0004000
|
|
re0: Hardware rev. 0x2c800000; PCI-E 125MHz
|
|
miibus0.re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
miibus0: <MII bus> [tentative] on re0
|
|
rgephy0: rev: 5
|
|
rgephy0.miibus0.re0.pci5.pcib5.pci0.pcib0.acpi0.nexus0.root0
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [tentative] on miibus0
|
|
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
rgephy0: <8211B/RTL8169S/8110S media interface> [attached!] on miibus0
|
|
miibus0: <MII bus> [attached!] on re0
|
|
usbus0: 480Mbps High Speed USB v2.0
|
|
re0: bpf attached
|
|
re0: MAC address: bc:5f:f4:49:91:04
|
|
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> [attached!] port 0xd000-0xd0ff mem 0xf0000000-0xf0003fff,0xf0004000-0xf0004fff irq 16 at device 0.0 on pci5
|
|
pci5: <ACPI PCI bus> [attached!] on pcib5
|
|
pcib5: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.4 on pci0
|
|
pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib6: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 28.5 on pci0
|
|
pcib6: domain 0
|
|
pcib6: secondary bus 6
|
|
pcib6: subordinate bus 7
|
|
pcib6: I/O decode 0xf000-0xfff
|
|
pcib6: no prefetched decode
|
|
pcib6: Subtractively decoded bridge.
|
|
pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci6: <ACPI PCI bus> [tentative] on pcib6
|
|
pci6: domain=0, physical bus=6
|
|
found-> vendor=0x1b21, dev=0x1080, revid=0x03
|
|
domain=0, bus=6, slot=0, func=0
|
|
class=06-04-01, hdrtype=0x01, mfdev=0
|
|
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
|
|
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
|
|
intpin=a, irq=11
|
|
pcib6: matched entry for 6.0.INTA
|
|
pcib6: slot 0 INTA hardwired to GSI 17, IRQ 17
|
|
pcib7.pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pcib7: <ACPI PCI-PCI bridge> [tentative] irq 17 at device 0.0 on pci6
|
|
pcib7: domain 0
|
|
pcib7: secondary bus 7
|
|
pcib7: subordinate bus 7
|
|
pcib7: I/O decode 0xfff000-0xfff
|
|
pcib7: no prefetched decode
|
|
pcib7: Subtractively decoded bridge.
|
|
pci7.pcib7.pci6.pcib6.pci0.pcib0.acpi0.nexus0.root0
|
|
pci7: <ACPI PCI bus> [tentative] on pcib7
|
|
pci7: domain=0, physical bus=7
|
|
pci7: <ACPI PCI bus> [attached!] on pcib7
|
|
pcib7: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 0.0 on pci6
|
|
pci6: <ACPI PCI bus> [attached!] on pcib6
|
|
pcib6: <ACPI PCI-PCI bridge> [attached!] irq 17 at device 28.5 on pci0
|
|
ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
ehci1: <Intel Panther Point USB 2.0 controller> [tentative] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0
|
|
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf7f17000
|
|
ugen0.1: <Intel> at usbus0
|
|
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
|
|
usbus1: waiting for BIOS to give up control
|
|
usbus1: EHCI version 1.0
|
|
usbus1.ehci1.pci0.pcib0.acpi0.nexus0.root0
|
|
usbus1: <Intel Panther Point USB 2.0 controller> [tentative] on ehci1
|
|
usbus1: <Intel Panther Point USB 2.0 controller> [attached!] on ehci1
|
|
ehci1: <Intel Panther Point USB 2.0 controller> [attached!] mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0
|
|
isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
|
|
isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
isa0: <ISA bus> [tentative] on isab0
|
|
isa0: <ISA bus> [attached!] on isab0
|
|
isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
|
|
ahci0.pci0.pcib0.acpi0.nexus0.root0
|
|
ahci0: <AHCI-PCI-SATA> [tentative] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0
|
|
ahci0: attempting to allocate 1 MSI vector (1 supported)
|
|
alloc MSI intr 17 on cpu0
|
|
ahci0: using IRQ 17 on cpu0 for MSI
|
|
ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf7f16000
|
|
usbus1: 480Mbps High Speed USB v2.0
|
|
ugen1.1: <Intel> at usbus1
|
|
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
ugen0.2: <vendor 0x8087> at usbus0
|
|
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
|
|
ahci0: AHCI 1.3 cap 0xc730ff45<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<BOH>, 6 ports, 32 tags/port, gen 3 (6Gbps)
|
|
ahci0.0: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.0: START HARDRESET
|
|
ahci0.1: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.1: START HARDRESET
|
|
ahci0.2: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.3: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.3: START HARDRESET
|
|
ahci0.4: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.4: START HARDRESET
|
|
ahci0.5: Caps 40006<HPCP,POD,SUD>
|
|
ahci0.5: START HARDRESET
|
|
map MSI intr 17 on cpu0
|
|
ahci0.2: START HARDRESET
|
|
ugen1.2: <vendor 0x8087> at usbus1
|
|
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
|
|
uhub2: 6 ports with 6 removable, self powered
|
|
uhub3: 8 ports with 8 removable, self powered
|
|
ugen1.3: <vendor 0x1a40> at usbus1
|
|
uhub4: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 3> on usbus1
|
|
uhub4: MTT enabled
|
|
uhub4: 7 ports with 7 removable, self powered
|
|
ahci0.0: Port appears to be unplugged
|
|
ahci0.1: Port appears to be unplugged
|
|
ahci0.5: Port appears to be unplugged
|
|
ahci0.4: END HARDRESET 0
|
|
ahci0.2: END HARDRESET 0
|
|
ahci0.4: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.3: END HARDRESET 0
|
|
ahci0.2: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.3: START SOFTRESET 4c017<HPCP,CR,FR,FRE,POD,SUD,ST>
|
|
ahci0.2: sig 00000101
|
|
ahci0.4: sig 00000101
|
|
ahci0.3: sig 00000101
|
|
ahci0.2: END SOFTRESET
|
|
ahci0.4: END SOFTRESET
|
|
ahci0.3: END SOFTRESET
|
|
ugen1.4: <vendor 0x04d9> at usbus1
|
|
ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus1
|
|
kbd2 at ukbd0
|
|
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
|
|
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on usbus1
|
|
ahci0.1: No device detected
|
|
ahci0.0: No device detected
|
|
ahci0.5: No device detected
|
|
ahci0.0: END HARDRESET 19
|
|
ahci0.1: END HARDRESET 19
|
|
ahci0.5: END HARDRESET 19
|
|
(probe0:ahci0:0:0:0): error 22
|
|
(probe0:ahci0:0:0:0): Unretryable Error
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
(probe0:ahci0:1:0:0): error 22
|
|
(probe0:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
ahci0.2: Found DISK "WDC WD7500BPKT-75PK4T0 01.01A01" serial="WD-WX41E72JL513"
|
|
ahci0.2: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
|
|
ahci0.2: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.2: Set dummy xfer mode to 46
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
ahci0.3: Found DISK "WDC WD7500BPKT-00PK4T0 01.01A01" serial="WD-WXP1C42A2867"
|
|
ahci0.3: tags=32/32 satacap=1f06 satacap2=0000 satafea=004c NCQ=YES capacity=715404.86MB
|
|
ahci0.3: f85=7469 f86=bc09 f87=6123 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.3: Set dummy xfer mode to 46
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
ahci0.4: Found DISK "WDC WD5003ABYX-01WERA1 01.01S02" serial="WD-WMAYP5624974"
|
|
ahci0.4: tags=32/32 satacap=1d06 satacap2=0004 satafea=0044 NCQ=YES capacity=476940.02MB
|
|
ahci0.4: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
|
|
ahci0.4: Set dummy xfer mode to 46
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
(probe0:ahci0:5:0:0): error 22
|
|
(probe0:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
ahci0: <AHCI-PCI-SATA> [attached!] port 0xf020-0xf03f,0xf040-0xf043,0xf050-0xf057,0xf060-0xf063,0xf070-0xf077 mem 0xf7f16000-0xf7f167ff irq 17,19 at device 31.2 on pci0
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x1e22) at device 31.3 irq 18
|
|
pci0: <ACPI PCI bus> [attached!] on pcib0
|
|
pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
|
|
acpi_button0.acpi0.nexus0.root0
|
|
acpi_button0: <Power Button> [tentative] on acpi0
|
|
acpi_button0: <Power Button> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ppc0: using extended I/O port range
|
|
ppc0: ECP SPP ECP+EPP SPP
|
|
ppc0.acpi0.nexus0.root0
|
|
ppc0: <ECP parallel printer port> [tentative] port 0x778-0x77f,0x378-0x37f irq 5 drq 3 on acpi0
|
|
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
|
|
ppc0: FIFO with 16/16/9 bytes threshold
|
|
vm_page_alloc_contig: 16384k high 0000000000ffffff failed
|
|
contigmalloc_map: failed size 1024 low=0 high=ffffff align=1 boundary=65536 flags=00000601
|
|
isa_dmainit(3, 1024) failed
|
|
ppbus0.ppc0.acpi0.nexus0.root0
|
|
ppbus0: <Parallel port bus> [tentative] on ppc0
|
|
plip0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
plip0: <PLIP network interface> [tentative] on ppbus0
|
|
lp0: bpf attached
|
|
plip0: <PLIP network interface> [attached!] on ppbus0
|
|
lpt0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
lpt0: <Printer> [tentative] on ppbus0
|
|
lpt0: Interrupt-driven port
|
|
lpt0: <Printer> [attached!] on ppbus0
|
|
ppi0.ppbus0.ppc0.acpi0.nexus0.root0
|
|
ppi0: <Parallel I/O> [tentative] on ppbus0
|
|
ppi0: <Parallel I/O> [attached!] on ppbus0
|
|
ppbus0: <Parallel port bus> [attached!] on ppc0
|
|
ppc0: <ECP parallel printer port> [attached!] port 0x778-0x77f,0x378-0x37f irq 5 drq 3 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
sio0: irq maps: 0xc09 0xc19 0xc09 0xc09
|
|
sio0.acpi0.nexus0.root0
|
|
sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
cpu0.acpi0.nexus0.root0
|
|
cpu0: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE1DBFEF400 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
|
|
cpu_cst0.cpu0.acpi0.nexus0.root0
|
|
cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst0: non-C3 0
|
|
cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
|
|
cpu_pst0.cpu0.acpi0.nexus0.root0
|
|
cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
|
|
cpu_pst0: create pkg domain0, coord 0xfe
|
|
cpu_pst0: control reg 127 0
|
|
cpu_pst0: status reg 127 0
|
|
cpu_pst0: freq 3300, pwr 55000, xlat 10, blat 10, cv 00002100, sv 00002100
|
|
cpu_pst0: freq 3200, pwr 52199, xlat 10, blat 10, cv 00002000, sv 00002000
|
|
cpu_pst0: freq 3100, pwr 49990, xlat 10, blat 10, cv 00001f00, sv 00001f00
|
|
cpu_pst0: freq 3000, pwr 47821, xlat 10, blat 10, cv 00001e00, sv 00001e00
|
|
cpu_pst0: freq 2800, pwr 43604, xlat 10, blat 10, cv 00001c00, sv 00001c00
|
|
cpu_pst0: freq 2700, pwr 41563, xlat 10, blat 10, cv 00001b00, sv 00001b00
|
|
cpu_pst0: freq 2600, pwr 39553, xlat 10, blat 10, cv 00001a00, sv 00001a00
|
|
cpu_pst0: freq 2500, pwr 37581, xlat 10, blat 10, cv 00001900, sv 00001900
|
|
cpu_pst0: freq 2400, pwr 35648, xlat 10, blat 10, cv 00001800, sv 00001800
|
|
cpu_pst0: freq 2300, pwr 33754, xlat 10, blat 10, cv 00001700, sv 00001700
|
|
cpu_pst0: freq 2200, pwr 31904, xlat 10, blat 10, cv 00001600, sv 00001600
|
|
cpu_pst0: freq 2100, pwr 30084, xlat 10, blat 10, cv 00001500, sv 00001500
|
|
cpu_pst0: freq 1900, pwr 26557, xlat 10, blat 10, cv 00001300, sv 00001300
|
|
cpu_pst0: freq 1800, pwr 24849, xlat 10, blat 10, cv 00001200, sv 00001200
|
|
cpu_pst0: freq 1700, pwr 23177, xlat 10, blat 10, cv 00001100, sv 00001100
|
|
cpu_pst0: freq 1600, pwr 21545, xlat 10, blat 10, cv 00001000, sv 00001000
|
|
cpu_pst0: _PPC 0
|
|
cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
|
|
clockmod0.cpu0.acpi0.nexus0.root0
|
|
clockmod0: <CPU clock modulation> [tentative] on cpu0
|
|
clock modulation:
|
|
0x0000 100.00%
|
|
0x001f 93.75%
|
|
0x001e 87.50%
|
|
0x001d 81.25%
|
|
0x001c 75.00%
|
|
0x001b 68.75%
|
|
0x001a 62.50%
|
|
0x0019 56.25%
|
|
0x0018 50.00%
|
|
0x0017 43.75%
|
|
0x0016 37.50%
|
|
0x0015 31.25%
|
|
0x0014 25.00%
|
|
0x0013 18.75%
|
|
0x0012 12.50%
|
|
0x0011 6.25%
|
|
clockmod0: <CPU clock modulation> [attached!] on cpu0
|
|
perfbias0.cpu0.acpi0.nexus0.root0
|
|
perfbias0: <CPU perf-energy bias> [tentative] on cpu0
|
|
perfbias0: <CPU perf-energy bias> [attached!] on cpu0
|
|
coretemp0.cpu0.acpi0.nexus0.root0
|
|
coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
|
|
coretemp0: Tj(target) value 105 does not seem right.
|
|
coretemp0: Setting TjMax=100
|
|
coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
|
|
cpu0: <ACPI CPU> [attached!] on acpi0
|
|
cpu1.acpi0.nexus0.root0
|
|
cpu1: <ACPI CPU> [tentative] on acpi0
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE1E04A8280 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
|
|
ACPI: Dynamic OEM Table Load:
|
|
ACPI: SSDT 0xFFFFFFE033B197E0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
|
|
cpu_cst1.cpu1.acpi0.nexus0.root0
|
|
cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst1: non-C3 0
|
|
cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
|
|
cpu_pst1.cpu1.acpi0.nexus0.root0
|
|
cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
|
|
cpu_pst1: control reg 127 0
|
|
cpu_pst1: status reg 127 0
|
|
cpu_pst1: _PPC 0
|
|
cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
|
|
clockmod1.cpu1.acpi0.nexus0.root0
|
|
clockmod1: <CPU clock modulation> [tentative] on cpu1
|
|
clockmod1: <CPU clock modulation> [attached!] on cpu1
|
|
perfbias1.cpu1.acpi0.nexus0.root0
|
|
perfbias1: <CPU perf-energy bias> [tentative] on cpu1
|
|
perfbias1: <CPU perf-energy bias> [attached!] on cpu1
|
|
coretemp1.cpu1.acpi0.nexus0.root0
|
|
coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
|
|
coretemp1: Tj(target) value 105 does not seem right.
|
|
coretemp1: Setting TjMax=100
|
|
coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
|
|
cpu1: <ACPI CPU> [attached!] on acpi0
|
|
cpu2.acpi0.nexus0.root0
|
|
cpu2: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst2.cpu2.acpi0.nexus0.root0
|
|
cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst2: non-C3 0
|
|
cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
|
|
cpu_pst2.cpu2.acpi0.nexus0.root0
|
|
cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
|
|
cpu_pst2: control reg 127 0
|
|
cpu_pst2: status reg 127 0
|
|
cpu_pst2: _PPC 0
|
|
cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
|
|
clockmod2.cpu2.acpi0.nexus0.root0
|
|
clockmod2: <CPU clock modulation> [tentative] on cpu2
|
|
clockmod2: <CPU clock modulation> [attached!] on cpu2
|
|
perfbias2.cpu2.acpi0.nexus0.root0
|
|
perfbias2: <CPU perf-energy bias> [tentative] on cpu2
|
|
perfbias2: <CPU perf-energy bias> [attached!] on cpu2
|
|
coretemp2.cpu2.acpi0.nexus0.root0
|
|
coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
|
|
coretemp2: Tj(target) value 105 does not seem right.
|
|
coretemp2: Setting TjMax=100
|
|
coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
|
|
cpu2: <ACPI CPU> [attached!] on acpi0
|
|
cpu3.acpi0.nexus0.root0
|
|
cpu3: <ACPI CPU> [tentative] on acpi0
|
|
cpu_cst3.cpu3.acpi0.nexus0.root0
|
|
cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
cpu_cst3: non-C3 0
|
|
cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
|
|
cpu_pst3.cpu3.acpi0.nexus0.root0
|
|
cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
|
|
cpu_pst3: control reg 127 0
|
|
cpu_pst3: status reg 127 0
|
|
cpu_pst3: _PPC 0
|
|
cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
|
|
clockmod3.cpu3.acpi0.nexus0.root0
|
|
clockmod3: <CPU clock modulation> [tentative] on cpu3
|
|
clockmod3: <CPU clock modulation> [attached!] on cpu3
|
|
perfbias3.cpu3.acpi0.nexus0.root0
|
|
perfbias3: <CPU perf-energy bias> [tentative] on cpu3
|
|
perfbias3: <CPU perf-energy bias> [attached!] on cpu3
|
|
coretemp3.cpu3.acpi0.nexus0.root0
|
|
coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
|
|
coretemp3: Tj(target) value 105 does not seem right.
|
|
coretemp3: Setting TjMax=100
|
|
coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
|
|
cpu3: <ACPI CPU> [attached!] on acpi0
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
unknown: not probed (disabled)
|
|
ACPI: Enabled 4 GPEs in block 00 to 3F
|
|
acpi0: <ALASKA A M I> [attached!] at port 0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x72-0x7f,0x80,0x84-0x86,0x88,0x8c-0x8e,0x90-0x9f,0xa2-0xbf,0xe0-0xef,0x4d0-0x4d1,0x290-0x29f,0x454-0x457,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x680-0x69f,0x1000-0x100f,0xffff,0xffff,0x400-0x453,0x458-0x47f,0x500-0x57f,0x164e-0x164f iomem 0xfed1c000-0xfed1ffff,0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xff000000-0xffffffff,0xfee00000-0xfeefffff,0xf0100000-0xf0100fff,0xfed40000-0xfed44fff irq 9 on motherboard
|
|
sio-: sio0 exists, using next available unit number
|
|
sio-: sio1 exists, using next available unit number
|
|
sio-: sio2 exists, using next available unit number
|
|
sio-: sio3 exists, using next available unit number
|
|
ppc-: ppc0 exists, using next available unit number
|
|
Trying Read_Port at 203
|
|
Trying Read_Port at 243
|
|
Trying Read_Port at 283
|
|
Trying Read_Port at 2c3
|
|
Trying Read_Port at 303
|
|
Trying Read_Port at 343
|
|
Trying Read_Port at 383
|
|
Trying Read_Port at 3c3
|
|
isa_probe_children: disabling PnP devices
|
|
isa_probe_children: probing non-PnP devices
|
|
pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
pmtimer0 [tentative] on isa0
|
|
pmtimer0 [attached!] on isa0
|
|
adv0 [tentative] failed to probe on isa0
|
|
atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
|
|
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
|
|
atkbd: the current kbd controller command byte 0065
|
|
atkbd: failed to reset the keyboard.
|
|
kbd0 at atkbd0
|
|
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
|
|
cpu_cst: global Cx count 3
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
|
|
psm0: current command byte:0065
|
|
psm0: strange result for test aux port (2).
|
|
psm0: failed to reset the aux device.
|
|
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
|
|
vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
fb0: vga0, vga, type:VGA (5), flags:0x7007f
|
|
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
|
|
fb0: init mode:24, bios mode:3, current mode:24
|
|
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
|
|
VGA parameters upon power-up
|
|
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters in BIOS for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
VGA parameters to be used for mode 24
|
|
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
|
|
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
|
|
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
|
|
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
|
|
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
|
|
sc0: <System console> [tentative] at flags 0x100 on isa0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x10, AccessWidth(arg1) 0x1
|
|
C2 -> cpu specific C2 sub state 0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
|
|
sc0: <System console> [attached!] at flags 0x100 on isa0
|
|
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
|
|
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
|
|
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
|
|
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
|
|
wbsio0: wbsio_probe port 0x2e: Device ID 0xc3, Rev 0x33
|
|
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
|
|
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
|
|
sio1 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
sio2 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
|
|
sio3: not probed (disabled)
|
|
sio4: not probed (disabled)
|
|
ppc1: cannot reserve I/O port range
|
|
ppc1: <Parallel port> [tentative] failed to probe at irq 7 on isa0
|
|
lnc0: not probed (disabled)
|
|
cs0: not probed (disabled)
|
|
sn0: not probed (disabled)
|
|
isa_probe_children: probing PnP devices
|
|
C3: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x20, AccessWidth(arg1) 0x1
|
|
C3 -> cpu specific C3 sub state 0
|
|
faith0: bpf attached
|
|
lo0: bpf attached
|
|
ppp0: bpf attached
|
|
sl0: bpf attached
|
|
hptrr: no controller detected.
|
|
hpt27xx: no controller detected.
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring bus: ahci0
|
|
CAM: Configuring 6 busses
|
|
(probe0:ahci0:0:0:0): error 22
|
|
(probe0:ahci0:0:0:0): Unretryable Error
|
|
(probe0:ahci0:0:1:0): error 22
|
|
(probe0:ahci0:0:1:0): Unretryable Error
|
|
(probe0:ahci0:0:2:0): error 22
|
|
(probe0:ahci0:0:2:0): Unretryable Error
|
|
(probe0:ahci0:0:3:0): error 22
|
|
(probe0:ahci0:0:3:0): Unretryable Error
|
|
(probe0:ahci0:0:4:0): error 22
|
|
(probe0:ahci0:0:4:0): Unretryable Error
|
|
(probe0:ahci0:0:5:0): error 22
|
|
(probe0:ahci0:0:5:0): Unretryable Error
|
|
(probe0:ahci0:0:6:0): error 22
|
|
(probe0:ahci0:0:6:0): Unretryable Error
|
|
(probe0:ahci0:0:7:0): error 22
|
|
(probe0:ahci0:0:7:0): Unretryable Error
|
|
(probe0:ahci0:0:8:0): error 22
|
|
(probe0:ahci0:0:8:0): Unretryable Error
|
|
(probe0:ahci0:0:9:0): error 22
|
|
(probe0:ahci0:0:9:0): Unretryable Error
|
|
(probe0:ahci0:0:10:0): error 22
|
|
(probe0:ahci0:0:10:0): Unretryable Error
|
|
(probe0:ahci0:0:11:0): error 22
|
|
(probe0:ahci0:0:11:0): Unretryable Error
|
|
(probe0:ahci0:0:12:0): error 22
|
|
(probe0:ahci0:0:12:0): Unretryable Error
|
|
(probe0:ahci0:0:13:0): error 22
|
|
(probe0:ahci0:0:13:0): Unretryable Error
|
|
(probe0:ahci0:0:14:0): error 22
|
|
(probe0:ahci0:0:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe1:ahci0:1:0:0): error 22
|
|
(probe1:ahci0:1:0:0): Unretryable Error
|
|
(probe0:ahci0:1:1:0): error 22
|
|
(probe0:ahci0:1:1:0): Unretryable Error
|
|
(probe0:ahci0:1:2:0): error 22
|
|
(probe0:ahci0:1:2:0): Unretryable Error
|
|
(probe0:ahci0:1:3:0): error 22
|
|
(probe0:ahci0:1:3:0): Unretryable Error
|
|
(probe0:ahci0:1:4:0): error 22
|
|
(probe0:ahci0:1:4:0): Unretryable Error
|
|
(probe0:ahci0:1:5:0): error 22
|
|
(probe0:ahci0:1:5:0): Unretryable Error
|
|
(probe0:ahci0:1:6:0): error 22
|
|
(probe0:ahci0:1:6:0): Unretryable Error
|
|
(probe0:ahci0:1:7:0): error 22
|
|
(probe0:ahci0:1:7:0): Unretryable Error
|
|
(probe0:ahci0:1:8:0): error 22
|
|
(probe0:ahci0:1:8:0): Unretryable Error
|
|
(probe0:ahci0:1:9:0): error 22
|
|
(probe0:ahci0:1:9:0): Unretryable Error
|
|
(probe0:ahci0:1:10:0): error 22
|
|
(probe0:ahci0:1:10:0): Unretryable Error
|
|
(probe0:ahci0:1:11:0): error 22
|
|
(probe0:ahci0:1:11:0): Unretryable Error
|
|
(probe0:ahci0:1:12:0): error 22
|
|
(probe0:ahci0:1:12:0): Unretryable Error
|
|
(probe0:ahci0:1:13:0): error 22
|
|
(probe0:ahci0:1:13:0): Unretryable Error
|
|
(probe0:ahci0:1:14:0): error 22
|
|
(probe0:ahci0:1:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:2:1:0): error 22
|
|
(probe0:ahci0:2:1:0): Unretryable Error
|
|
(probe0:ahci0:2:2:0): error 22
|
|
(probe0:ahci0:2:2:0): Unretryable Error
|
|
(probe0:ahci0:2:3:0): error 22
|
|
(probe0:ahci0:2:3:0): Unretryable Error
|
|
(probe0:ahci0:2:4:0): error 22
|
|
(probe0:ahci0:2:4:0): Unretryable Error
|
|
(probe0:ahci0:2:5:0): error 22
|
|
(probe0:ahci0:2:5:0): Unretryable Error
|
|
(probe0:ahci0:2:6:0): error 22
|
|
(probe0:ahci0:2:6:0): Unretryable Error
|
|
(probe0:ahci0:2:7:0): error 22
|
|
(probe0:ahci0:2:7:0): Unretryable Error
|
|
(probe0:ahci0:2:8:0): error 22
|
|
(probe0:ahci0:2:8:0): Unretryable Error
|
|
(probe0:ahci0:2:9:0): error 22
|
|
(probe0:ahci0:2:9:0): Unretryable Error
|
|
(probe0:ahci0:2:10:0): error 22
|
|
(probe0:ahci0:2:10:0): Unretryable Error
|
|
(probe0:ahci0:2:11:0): error 22
|
|
(probe0:ahci0:2:11:0): Unretryable Error
|
|
(probe0:ahci0:2:12:0): error 22
|
|
(probe0:ahci0:2:12:0): Unretryable Error
|
|
(probe0:ahci0:2:13:0): error 22
|
|
(probe0:ahci0:2:13:0): Unretryable Error
|
|
(probe0:ahci0:2:14:0): error 22
|
|
(probe0:ahci0:2:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:3:1:0): error 22
|
|
(probe0:ahci0:3:1:0): Unretryable Error
|
|
(probe0:ahci0:3:2:0): error 22
|
|
(probe0:ahci0:3:2:0): Unretryable Error
|
|
(probe0:ahci0:3:3:0): error 22
|
|
(probe0:ahci0:3:3:0): Unretryable Error
|
|
(probe0:ahci0:3:4:0): error 22
|
|
(probe0:ahci0:3:4:0): Unretryable Error
|
|
(probe0:ahci0:3:5:0): error 22
|
|
(probe0:ahci0:3:5:0): Unretryable Error
|
|
(probe0:ahci0:3:6:0): error 22
|
|
(probe0:ahci0:3:6:0): Unretryable Error
|
|
(probe0:ahci0:3:7:0): error 22
|
|
(probe0:ahci0:3:7:0): Unretryable Error
|
|
(probe0:ahci0:3:8:0): error 22
|
|
(probe0:ahci0:3:8:0): Unretryable Error
|
|
(probe0:ahci0:3:9:0): error 22
|
|
(probe0:ahci0:3:9:0): Unretryable Error
|
|
(probe0:ahci0:3:10:0): error 22
|
|
(probe0:ahci0:3:10:0): Unretryable Error
|
|
(probe0:ahci0:3:11:0): error 22
|
|
(probe0:ahci0:3:11:0): Unretryable Error
|
|
(probe0:ahci0:3:12:0): error 22
|
|
(probe0:ahci0:3:12:0): Unretryable Error
|
|
(probe0:ahci0:3:13:0): error 22
|
|
(probe0:ahci0:3:13:0): Unretryable Error
|
|
(probe0:ahci0:3:14:0): error 22
|
|
(probe0:ahci0:3:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe0:ahci0:4:1:0): error 22
|
|
(probe0:ahci0:4:1:0): Unretryable Error
|
|
(probe0:ahci0:4:2:0): error 22
|
|
(probe0:ahci0:4:2:0): Unretryable Error
|
|
(probe0:ahci0:4:3:0): error 22
|
|
(probe0:ahci0:4:3:0): Unretryable Error
|
|
(probe0:ahci0:4:4:0): error 22
|
|
(probe0:ahci0:4:4:0): Unretryable Error
|
|
(probe0:ahci0:4:5:0): error 22
|
|
(probe0:ahci0:4:5:0): Unretryable Error
|
|
(probe0:ahci0:4:6:0): error 22
|
|
(probe0:ahci0:4:6:0): Unretryable Error
|
|
(probe0:ahci0:4:7:0): error 22
|
|
(probe0:ahci0:4:7:0): Unretryable Error
|
|
(probe0:ahci0:4:8:0): error 22
|
|
(probe0:ahci0:4:8:0): Unretryable Error
|
|
(probe0:ahci0:4:9:0): error 22
|
|
(probe0:ahci0:4:9:0): Unretryable Error
|
|
(probe0:ahci0:4:10:0): error 22
|
|
(probe0:ahci0:4:10:0): Unretryable Error
|
|
(probe0:ahci0:4:11:0): error 22
|
|
(probe0:ahci0:4:11:0): Unretryable Error
|
|
(probe0:ahci0:4:12:0): error 22
|
|
(probe0:ahci0:4:12:0): Unretryable Error
|
|
(probe0:ahci0:4:13:0): error 22
|
|
(probe0:ahci0:4:13:0): Unretryable Error
|
|
(probe0:ahci0:4:14:0): error 22
|
|
(probe0:ahci0:4:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
(probe5:ahci0:5:0:0): error 22
|
|
(probe5:ahci0:5:0:0): Unretryable Error
|
|
(probe0:ahci0:5:1:0): error 22
|
|
(probe0:ahci0:5:1:0): Unretryable Error
|
|
(probe0:ahci0:5:2:0): error 22
|
|
(probe0:ahci0:5:2:0): Unretryable Error
|
|
(probe0:ahci0:5:3:0): error 22
|
|
(probe0:ahci0:5:3:0): Unretryable Error
|
|
(probe0:ahci0:5:4:0): error 22
|
|
(probe0:ahci0:5:4:0): Unretryable Error
|
|
(probe0:ahci0:5:5:0): error 22
|
|
(probe0:ahci0:5:5:0): Unretryable Error
|
|
(probe0:ahci0:5:6:0): error 22
|
|
(probe0:ahci0:5:6:0): Unretryable Error
|
|
(probe0:ahci0:5:7:0): error 22
|
|
(probe0:ahci0:5:7:0): Unretryable Error
|
|
(probe0:ahci0:5:8:0): error 22
|
|
(probe0:ahci0:5:8:0): Unretryable Error
|
|
(probe0:ahci0:5:9:0): error 22
|
|
(probe0:ahci0:5:9:0): Unretryable Error
|
|
(probe0:ahci0:5:10:0): error 22
|
|
(probe0:ahci0:5:10:0): Unretryable Error
|
|
(probe0:ahci0:5:11:0): error 22
|
|
(probe0:ahci0:5:11:0): Unretryable Error
|
|
(probe0:ahci0:5:12:0): error 22
|
|
(probe0:ahci0:5:12:0): Unretryable Error
|
|
(probe0:ahci0:5:13:0): error 22
|
|
(probe0:ahci0:5:13:0): Unretryable Error
|
|
(probe0:ahci0:5:14:0): error 22
|
|
(probe0:ahci0:5:14:0): Unretryable Error
|
|
CAM: Finished configuring bus: ahci0
|
|
CAM: finished configuring all busses
|
|
pass0 at ahci0 bus 2 target 0 lun 0
|
|
pass0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
pass0: Serial Number WD-WX41E72JL513
|
|
pass0: 300.000MB/s transfers
|
|
pass1 at ahci0 bus 3 target 0 lun 0
|
|
pass1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
pass1: Serial Number WD-WXP1C42A2867
|
|
pass1: 300.000MB/s transfers
|
|
pass2 at ahci0 bus 4 target 0 lun 0
|
|
pass2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
pass2: Serial Number WD-WMAYP5624974
|
|
pass2: 300.000MB/s transfers
|
|
sg0 at ahci0 bus 2 target 0 lun 0
|
|
sg0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
sg0: Serial Number WD-WX41E72JL513
|
|
sg0: 300.000MB/s transfers
|
|
sg1 at ahci0 bus 3 target 0 lun 0
|
|
sg1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
sg1: Serial Number WD-WXP1C42A2867
|
|
sg1: 300.000MB/s transfers
|
|
sg2 at ahci0 bus 4 target 0 lun 0
|
|
sg2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
sg2: Serial Number WD-WMAYP5624974
|
|
sg2: 300.000MB/s transfers
|
|
No policy for da0 specified, or policy not found
|
|
disk scheduler: set policy of da0 to noop
|
|
ugen1.5: <Logitech> at usbus1
|
|
da0: si_iosize_max:131072
|
|
No policy for da1 specified, or policy not found
|
|
disk scheduler: set policy of da1 to noop
|
|
da1: si_iosize_max:131072
|
|
No policy for da2 specified, or policy not found
|
|
disk scheduler: set policy of da2 to noop
|
|
da2: si_iosize_max:131072
|
|
da0 at ahci0 bus 2 target 0 lun 0
|
|
da0: <SATA WDC WD7500BPKT-7 01.0> Fixed Direct Access SCSI-4 device
|
|
da0: Serial Number WD-WX41E72JL513
|
|
da0: 300.000MB/s transfers
|
|
da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
|
|
da1 at ahci0 bus 3 target 0 lun 0
|
|
da1: <SATA WDC WD7500BPKT-0 01.0> Fixed Direct Access SCSI-4 device
|
|
da1: Serial Number WD-WXP1C42A2867
|
|
da1: 300.000MB/s transfers
|
|
da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C)
|
|
da2 at ahci0 bus 4 target 0 lun 0
|
|
da2: <SATA WDC WD5003ABYX-0 01.0> Fixed Direct Access SCSI-4 device
|
|
da2: Serial Number WD-WMAYP5624974
|
|
da2: 300.000MB/s transfers
|
|
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
|
|
ums0: <Logitech USB Laser Mouse, class 0/0, rev 2.00/31.00, addr 5> on usbus1
|
|
ums0: 8 buttons and [XYZT] coordinates ID=0
|
|
da0: type 0xa5, start 63, end = 488279609, size 488279547 : OK
|
|
da0: type 0xa5, start 488282112, end = 681641983, size 193359872
|
|
da0: C/H/S start 1023/39/46 (16501446) != start 488282112: invalid
|
|
da0: C/H/S end 1023/64/2 (16502977) != end 681641983: invalid
|
|
da0: type 0xa6, start 681641984, end = 875001855, size 193359872
|
|
da0: C/H/S start 1023/64/3 (16502978) != start 681641984: invalid
|
|
da0: C/H/S end 1023/88/22 (16504509) != end 875001855: invalid
|
|
da0: type 0x5, start 875003902, end = 1465147391, size 590143490
|
|
da0: C/H/S start 1023/120/53 (16506556) != start 875003902: invalid
|
|
da0: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
|
|
da0: type 0x83, start 875003904, end = 1070313471, size 195309568
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 875003904: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1070313471: invalid
|
|
da0<extended>: type 0x5, start 1070314560, end = 1136719871, size 66405312
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1070314560: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
|
|
da0: type 0x82, start 1070315520, end = 1136719871, size 66404352
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1070315520: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1136719871: invalid
|
|
da0<extended>: type 0x5, start 1136719872, end = 1302734847, size 166014976
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1136719872: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
|
|
da0: type 0x83, start 1136721920, end = 1302734847, size 166012928
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1136721920: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1302734847: invalid
|
|
da0<extended>: type 0x5, start 1302734848, end = 1458984959, size 156250112
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1302734848: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
|
|
da0: type 0x83, start 1302736896, end = 1458984959, size 156248064
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1302736896: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1458984959: invalid
|
|
da0<extended>: type 0x5, start 1458984960, end = 1465147391, size 6162432
|
|
da0<extended>: C/H/S start 1023/254/63 (16515008) != start 1458984960: invalid
|
|
da0<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da0: type 0x83, start 1458987008, end = 1465147391, size 6160384
|
|
da0: C/H/S start 1023/254/63 (16515008) != start 1458987008: invalid
|
|
da0: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da1: type 0xa5, start 63, end = 468744569, size 468744507 : OK
|
|
da1: type 0xa6, start 468750336, end = 662110207, size 193359872
|
|
da1: C/H/S start 1023/91/34 (16504710) != start 468750336: invalid
|
|
da1: C/H/S end 1023/115/53 (16506241) != end 662110207: invalid
|
|
da1: type 0xa9, start 662110208, end = 855470079, size 193359872
|
|
da1: C/H/S start 1023/115/54 (16506242) != start 662110208: invalid
|
|
da1: C/H/S end 1023/140/10 (16507773) != end 855470079: invalid
|
|
da1: type 0x5, start 855472126, end = 1465147391, size 609675266
|
|
da1: C/H/S start 1023/172/41 (16509820) != start 855472126: invalid
|
|
da1: C/H/S end 1023/52/51 (16502270) != end 1465147391: invalid
|
|
da1: type 0x83, start 855472128, end = 1048829951, size 193357824
|
|
da1: C/H/S start 0/0/3 (2) != start 855472128: invalid
|
|
da1: C/H/S end 1023/246/53 (16514494) != end 1048829951: invalid
|
|
da1<extended>: type 0x5, start 1048829952, end = 1115236351, size 66406400
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1048829952: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1115236351: invalid
|
|
da1: type 0x82, start 1048832000, end = 1115236351, size 66404352
|
|
da1: C/H/S start 0/32/33 (2048) != start 1048832000: invalid
|
|
da1: C/H/S end 1023/154/53 (16508698) != end 1115236351: invalid
|
|
da1<extended>: type 0x5, start 1115236352, end = 1291018239, size 175781888
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1115236352: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1291018239: invalid
|
|
da1: type 0x83, start 1115238400, end = 1291018239, size 175779840
|
|
da1: C/H/S start 0/32/33 (2048) != start 1115238400: invalid
|
|
da1: C/H/S end 1023/233/44 (16513666) != end 1291018239: invalid
|
|
da1<extended>: type 0x5, start 1291018240, end = 1457033215, size 166014976
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1291018240: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1457033215: invalid
|
|
da1: type 0x83, start 1291020288, end = 1457033215, size 166012928
|
|
da1: C/H/S start 0/32/33 (2048) != start 1291020288: invalid
|
|
da1: C/H/S end 1023/243/22 (16514274) != end 1457033215: invalid
|
|
da1<extended>: type 0x5, start 1457033216, end = 1465147391, size 8114176
|
|
da1<extended>: C/H/S start 1023/254/63 (16515008) != start 1457033216: invalid
|
|
da1<extended>: C/H/S end 1023/254/63 (16515008) != end 1465147391: invalid
|
|
da1: type 0x83, start 1457035264, end = 1465147391, size 8112128
|
|
da1: C/H/S start 0/32/33 (2048) != start 1457035264: invalid
|
|
da1: C/H/S end 505/21/28 (8145990) != end 1465147391: invalid
|
|
da2: type 0xa5, start 63, end = 195318269, size 195318207
|
|
da2: C/H/S end 1023/254/63 (16515008) != end 195318269: invalid
|
|
da2: type 0xa9, start 195318270, end = 429690554, size 234372285
|
|
da2: C/H/S start 1023/0/1 (16498944) != start 195318270: invalid
|
|
da2: C/H/S end 1023/254/63 (16515008) != end 429690554: invalid
|
|
da2: type 0xa5, start 429690555, end = 976768064, size 547077510 : OK
|
|
no B_DEVMAGIC (bootdev=0)
|
|
ATA PseudoRAID loaded
|
|
Mounting root from hammer:serno/WD-WMAYP5624974.s3d
|
|
HAMMER(ROOT) recovery check seqno=811173e0
|
|
HAMMER(ROOT) recovery range 3000000013a9e480-3000000013a9e480
|
|
HAMMER(ROOT) recovery nexto 3000000013a9e480 endseqno=811173e1
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 14256k, remaining available: 65536k
|
|
Mounting devfs
|
|
start_init: trying /sbin/init
|
|
kthread 0xffffffe0a4c8bb80 syncer6 has exited
|
|
kthread 0xffffffe0a4c8c100 syncer7 has exited
|
|
kthread 0xffffffe1dc229500 syncer8 has exited
|
|
kthread 0xffffffe2098d1380 syncer9 has exited
|
|
kthread 0xffffffe0a4c8c100 syncer10 has exited
|
|
kthread 0xffffffe0a4c8c680 syncer11 has exited
|
|
kthread 0xffffffe1dc229500 syncer12 has exited
|
|
re0: adjust device control 0x2000 -> 0x5000
|