|
Copyright (c) 2003-2012 The DragonFly Project.
|
|
Copyright (c) 1992-2003 The FreeBSD Project.
|
|
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
|
|
The Regents of the University of California. All rights reserved.
|
|
MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0
|
|
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
|
|
MPTABLE: warning PCI int dst apic id 1 does not exist
|
|
DragonFly v3.1.0.93.g7ca562-DEVELOPMENT #3: Wed Feb 1 17:39:54 EST 2012
|
|
phma@darner.ixazon.lan:/usr/obj/usr/src/sys/GENERIC
|
|
TSC clock: 2792946176 Hz, i8254 clock: 1193159 Hz
|
|
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
|
|
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
|
|
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
|
|
Features2=0x4400<CNXT-ID,xTPR>
|
|
real memory = 1071708160 (1022 MB)
|
|
avail memory = 1016315904 (969 MB)
|
|
lapic: divisor index 0, frequency 99750380 Hz
|
|
Initialize MI interrupts
|
|
FQ scheduler policy version 1.1 loaded
|
|
kbd1 at kbdmux0
|
|
disk scheduler: set policy of md0 to noop
|
|
md0: Malloc disk
|
|
ACPI: RSDP 0xf64a0 00014 (v0 PTLTD )
|
|
ACPI: RSDT 0x3fe7509c 00038 (v1 PTLTD RSDT 060400D0 LTP 00000000)
|
|
ACPI: FACP 0x3fe79e93 00074 (v1 IBM THINKCEN 060400D0 PTL 00000001)
|
|
ACPI: DSDT 0x3fe750d4 04DBF (v1 IBM THINKCEN 060400D0 MSFT 0100000E)
|
|
ACPI: FACS 0x3fe7afc0 00040
|
|
ACPI: TCPA 0x3fe79f07 00032 (v1 IBM THINKCEN 060400D0 PTL 00000001)
|
|
ACPI: APIC 0x3fe79f39 00068 (v1 PTLTD ? APIC 060400D0 LTP 00000000)
|
|
ACPI: BOOT 0x3fe79fa1 00028 (v1 PTLTD $SBFTBL$ 060400D0 LTP 00000001)
|
|
ACPI: SSDT 0x3fe79fc9 00037 (v1 PTLTD ACPIHT 060400D0 LTP 00000001)
|
|
npx0: <math processor> on motherboard
|
|
npx0: INT 16 interface
|
|
Using XMM optimized bcopy/copyin/copyout
|
|
cryptosoft0: <software crypto> on motherboard
|
|
acpi0: <PTLTD RSDT> on motherboard
|
|
ACPI FADT: SCI testing interrupt mode ...
|
|
sched_ithd: stray interrupt 9 on cpu0
|
|
ACPI FADT: SCI select level/high
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
objcache_reclaimlist
|
|
acpi0: Power Button (fixed)
|
|
Warning: ACPI is disabling APM's device. You can't run both
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 08 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 02 18 79 00 #...y.
|
|
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 08 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 08 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 01 00 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 02 18 79 00 #...y.
|
|
[ACPI Debug] Buffer [0x6]
|
|
0: 23 00 02 18 79 00 #...y.
|
|
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
|
|
pci0: <ACPI PCI bus> on pcib0
|
|
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xe807ffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0
|
|
agp0: <Intel 82865G (865G GMCH) SVGA controller> on vgapci0
|
|
agp0: detected 892k stolen memory
|
|
agp0: aperture size is 128M
|
|
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1820-0x183f irq 16 at device 29.0 on pci0
|
|
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
|
|
usb0: USB revision 1.0
|
|
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
|
|
uhub0: 2 ports with 2 removable, self powered
|
|
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
|
|
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
|
|
usb1: USB revision 1.0
|
|
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
|
|
uhub1: 2 ports with 2 removable, self powered
|
|
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
|
|
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
|
|
usb2: USB revision 1.0
|
|
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
|
|
uhub2: 2 ports with 2 removable, self powered
|
|
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
|
|
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
|
|
usb3: USB revision 1.0
|
|
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
|
|
uhub3: 2 ports with 2 removable, self powered
|
|
ehci0: <Intel 82801EB/R USB 2.0 controller> mem 0xe8080000-0xe80803ff irq 23 at device 29.7 on pci0
|
|
usb4: EHCI version 1.0
|
|
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
|
|
usb4: <Intel 82801EB/R USB 2.0 controller> on ehci0
|
|
usb4: USB revision 2.0
|
|
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
|
|
uhub4: 8 ports with 8 removable, self powered
|
|
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
|
|
pci3: <ACPI PCI bus> on pcib1
|
|
em0: <Intel(R) PRO/1000 Network Connection 82541EI 7.1.7> port 0x3000-0x303f mem 0xe8100000-0xe811ffff irq 16 at device 11.0 on pci3
|
|
em0: MAC address: 00:11:25:06:be:16
|
|
isab0: <PCI-ISA bridge> at device 31.0 on pci0
|
|
isa0: <ISA bus> on isab0
|
|
atapci0: <Intel ICH5 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
|
|
ata0: <ATA channel 0> on atapci0
|
|
disk scheduler: set policy of ad0 to fq
|
|
ad0: 58644MB <Maxtor 6Y060P0 YAR41BW0> at ata0-master UDMA100
|
|
ata1: <ATA channel 1> on atapci0
|
|
disk scheduler: set policy of acd0 to noop
|
|
acd0: CDRW <HL-DT-ST GCE-8483B/1.02> at ata1-master UDMA33
|
|
atapci1: <Intel ICH5 SATA150 controller> port 0x18a0-0x18af,0x1808-0x180b,0x18b0-0x18b7,0x180c-0x180f,0x18b8-0x18bf irq 18 at device 31.2 on pci0
|
|
ata2: <ATA channel 0> on atapci1
|
|
disk scheduler: set policy of ad4 to fq
|
|
ad4: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata2-master SATA150
|
|
ata3: <ATA channel 1> on atapci1
|
|
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x24d3) at device 31.3 irq 17
|
|
pcm0: <Intel ICH5 (82801EB)> port 0x1c00-0x1c3f,0x2000-0x20ff mem 0xe8080800-0xe80808ff,0xe8080c00-0xe8080dff irq 17 at device 31.5 on pci0
|
|
pcm0: <Analog Devices AD1981B AC97 Codec>
|
|
acpi_tz0: <Thermal Zone> on acpi0
|
|
acpi_tz0: _CRT value is absurd, ignored (6280.3C)
|
|
acpi_button0: <Power Button> on acpi0
|
|
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
|
|
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
|
|
kbd0 at atkbd0
|
|
psm0: <PS/2 Mouse> irq 12 on atkbdc0
|
|
psm0: model Generic PS/2 mouse, device ID 0
|
|
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
|
|
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
|
|
sio0: type 16550A
|
|
cpu0: <ACPI CPU> on acpi0
|
|
cpu_cst0: <ACPI CPU C-State> on cpu0
|
|
cpu1: <ACPI CPU> on acpi0
|
|
cpu_cst1: <ACPI CPU C-State> on cpu1
|
|
orm0: <Option ROMs> at iomem 0xca800-0xcb7ff,0xcb800-0xcc7ff,0xe0000-0xeffff on isa0
|
|
pmtimer0 on isa0
|
|
fdc1: cannot reserve I/O port range
|
|
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
|
|
sc0: <System console> at flags 0x100 on isa0
|
|
sc0: VGA <16 virtual consoles, flags=0x300>
|
|
sio2: can't drain, serial port might not exist, disabling
|
|
ppc0: parallel port not found.
|
|
CAM: Configuring 4 busses
|
|
CAM: finished configuring all busses
|
|
disk scheduler: set policy of cd0 to noop
|
|
Device Mapper version 4.16.0 loaded
|
|
dm_target_zero: Successfully initialized
|
|
dm_target_crypt: Successfully initialized
|
|
dm_target_error: Successfully initialized
|
|
cd0 at ata1 bus 0 target 0 lun 0
|
|
cd0: <HL-DT-ST CD-RW GCE-8483B 1.02> Removable CD-ROM SCSI-0 device
|
|
cd0: 33.000MB/s transfers
|
|
cd0: Attempt to query device size failed: NOT READY, Medium not present
|
|
Mounting root from hammer:serno/Y2P0C2BE.s1d
|
|
tryroot serno/Y2P0C2BE.s1d
|
|
HAMMER(ROOT) recovery check seqno=48279453
|
|
HAMMER(ROOT) recovery range 3000000001def4c0-3000000001def4c0
|
|
HAMMER(ROOT) recovery nexto 3000000001def4c0 endseqno=48279454
|
|
HAMMER(ROOT) mounted clean, no recovery needed
|
|
DMA space used: 332k, remaining available: 16384k
|
|
Mounting devfs
|
|
Loading configuration files.
|
|
Loading devfs rules:
|
|
/etc/defaults/devfs.conf
|
|
.
|
|
Configuring crypto disks.
|
|
Enter passphrase for /dev/serno/WD-WCAS80774005.s1d:
|
|
|
|
disk scheduler: set policy of mapper/temporary-cryptsetup-34 to noop
|
|
dm_target_crypt: Setting min/max mpipe buffers: 2/12
|
|
kthread 0xcc981260 mpipe_dm_crypt has exited
|
|
kthread 0xcc981560 mpipe_dm_crypt has exited
|
|
Key slot 0 unlocked.
|
|
disk scheduler: set policy of mapper/crypt1 to noop
|
|
dm_target_crypt: Setting min/max mpipe buffers: 2/12
|
|
dumpon: crash dumps to /dev/serno/Y2P0C2BE.s1b (21, 0x20001)
|
|
Starting file system checks:
|
|
/dev/serno/Y2P0C2BE.s1a:
|
|
FILESYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/serno/Y2P0C2BE.s1a:
|
|
clean, 319738 free
|
|
(498 frags, 39905 blocks, 0.1% fragmentation)
|
|
/dev/serno/WD-WCAS80774005.s1a:
|
|
FILESYSTEM CLEAN; SKIPPING CHECKS
|
|
/dev/serno/WD-WCAS80774005.s1a:
|
|
clean, 319758 free
|
|
(206 frags, 39944 blocks, 0.1% fragmentation)
|
|
HAMMER(crypt1) recovery check seqno=00ccb366
|
|
HAMMER(crypt1) recovery range 300000001dd7bfb8-300000001dd85330
|
|
HAMMER(crypt1) recovery nexto 300000001dd85330 endseqno=00ccb3cd
|
|
HAMMER(crypt1) recovery undo 300000001dd7bfb8-300000001dd85330 (37752 bytes)(RW)
|
|
HAMMER(crypt1) recovery complete
|
|
Setting hostname: darner.ixazon.lan.
|
|
net.inet6.ip6.accept_rtadv:
|
|
0
|
|
->
|
|
1
|
|
|
|
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
|
|
options=3<RXCSUM,TXCSUM>
|
|
inet 127.0.0.1 netmask 0xff000000
|
|
inet6 ::1 prefixlen 128
|
|
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
|
|
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
|
|
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
|
|
inet 192.168.7.5 netmask 0xffffff00 broadcast 192.168.7.255
|
|
inet6 fe80::211:25ff:fe06:be16%em0 prefixlen 64 tentative scopeid 0x1
|
|
ether 00:11:25:06:be:16
|
|
media: Ethernet autoselect
|
|
status: no carrier
|
|
add net default: gateway 192.168.7.1
|
|
add net 192.168.100.0: gateway 192.168.7.4
|
|
Additional routing options:
|
|
.
|
|
hw.bus.devctl_disable:
|
|
0
|
|
->
|
|
1
|
|
|
|
Mounting NFS file systems:
|
|
.
|
|
Building databases...
|
|
rcorder:
|
|
requirement `mountall' in file `/etc/rc.d/mysqld' has no providers.
|
|
|
|
rcorder:
|
|
requirement `slpd' in file `/etc/rc.d/cupsd' has no providers.
|
|
|
|
Starting syslogd.
|
|
Feb 3 07:49:04 darner syslogd: kernel boot file is /boot/kernel/kernel
|
|
No core dumps found.
|
|
swapon: adding /dev/serno/Y2P0C2BE.s1b as swap device
|
|
swapon: adding /dev/serno/WD-WCAS80774005.s1b as swap device
|
|
NFS CLIENT:
|
|
access_cache_timeout=5
|
|
neg_cache_timeout=3
|
|
.
|
|
ELF ldconfig path: /usr/lib /usr/lib/gcc41 /usr/lib/gcc44 /usr/lib/compat /usr/pkg/lib /usr/local/lib /etc/ld-elf.so.conf
|
|
Starting dntpd.
|
|
Starting local daemons:
|
|
route:
|
|
writing to routing socket
|
|
:
|
|
File exists
|
|
add net 192.168.100.0: gateway chausie: File exists
|
|
Using HAMMER PFSs you can define history retention policy per directory tree.
|
|
For example, if /home/userA and /home/userB are two PFSs, you can configure that
|
|
history is saved 90 days for /home/userA and 30 days for /home/userB. If at
|
|
some point many big changes are made, and you would like to recover some of the
|
|
space that the history occupies, you can delete history selectively on a per PFS
|
|
basis. For example history can be deleted for /home/userA so it only covers 14
|
|
days, or granularity can be changed to one week from default of one day. Both
|
|
without changing amount of history saved for /home/userB. See "man HAMMER" for
|
|
details.
|
|
fetchmail: removing stale lockfile
|
|
/etc/rc.local: startocat: not found
|
|
.
|
|
Updating motd.
|
|
Starting usbd.
|
|
Feb 03 07:49:07.571 [notice] Tor v0.2.2.35 (git-b04388f9e7546a9f). This is experimental software. Do not rely on it for strong anonymity. (Running on DragonFly i386)
|
|
Feb 03 07:49:07.687 [notice] Initialized libevent version 2.0.10-stable using method poll. Good.
|
|
Feb 03 07:49:07.688 [notice] Opening OR listener on 0.0.0.0:6561
|
|
Feb 03 07:49:07.688 [notice] Opening Directory listener on 0.0.0.0:9030
|
|
Feb 03 07:49:07.689 [notice] Opening Socks listener on 127.0.0.1:9050
|
|
Feb 03 07:49:07.689 [notice] Opening Socks listener on 192.168.7.5:9050
|
|
Feb 03 07:49:07.689 [notice] Opening Control listener on 127.0.0.1:9051
|
|
Configuring syscons:
|
|
keymap
|
|
blanktime
|
|
.
|
|
Starting sshd.
|
|
/etc/rc: WARNING: /usr/pkg/etc/socks5.conf is not readable.
|
|
Additional ABI support:
|
|
.
|
|
Starting cron.
|
|
Local package initialization:
|
|
.
|
|
Additional TCP options:
|
|
.
|
|
Starting privoxy.
|
|
postfix/postfix-script: warning: damaged message: corrupt/F2CAB75C500B0
|
|
postfix/postfix-script: starting the Postfix mail system
|
|
postfix/postfix-script: warning: damaged message: corrupt/F2CAB75C500B0
|
|
postfix/postfix-script: starting the Postfix mail system
|
|
Feb 3 07:49:12 darner postfix/master[928]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable
|
|
Starting mysqld.
|
|
Starting moused:
|
|
.
|
|
/etc/rc: WARNING: Ignoring scratch file /etc/rc.d/miredo~
|
|
Starting inetd.
|
|
120203 07:49:12 mysqld_safe Logging to '/var/mysql/darner.ixazon.lan.err'.
|
|
Starting dbus.
|
|
120203 07:49:13 mysqld_safe Starting mysqld daemon with databases from /var/mysql
|
|
Starting cupsd.
|
|
Starting apache.
|
|
httpd: Could not reliably determine the server's fully qualified domain name, using darner.ixazon.lan for ServerName
|
|
[Fri Feb 03 07:49:21 2012] [warn] (2)No such file or directory: Failed to enable the 'httpready' Accept Filter
|
|
|
|
Fri Feb 3 07:49:22 UTC 2012
|
|
drm0: <Intel i865G GMCH> on vgapci0
|
|
vgapci0: child drm0 requested pci_enable_busmaster
|
|
info: [drm] AGP at 0xf0000000 128MB
|
|
info: [drm] Initialized i915 1.6.0 20080730
|
|
Feb 3 07:49:31 darner kdm_greet[1071]: Data directory "/var/lib/kdm" not accessible: Permission denied
|
|
pmap_collect: collecting pv entries -- suggest increasing PMAP_SHPGPERPROC
|
|
pmap_collect: collecting pv entries -- suggest increasing PMAP_SHPGPERPROC
|
|
Feb 3 03:00:22 darner su: in pam_sm_authenticate(): (pam_group) neither luser nor ruser specified, assuming ruser
|
|
Feb 3 03:00:25 darner su: phma to root on /dev/pts/1
|