DragonFlyBSD

Copyright (c) 2003-2012 The DragonFly Project.

Copyright (c) 1992-2003 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

Slab ZoneSize set to 128KB

Leaving critical section, allowing interrupts

ACPI SDT: RSDP not in EBDA

ACPI SDT: RSDP in BIOS mem

ACPI FADT: SCI irq 9, level/low

MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0

MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1

MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1

DragonFly v2.11.0.4330.gd3619-DEVELOPMENT #195: Tue Sep 18 21:58:14 PDT 2012

davshao@:/usr/obj/usr/src/sys/GENERIC

Calibrating clock(s) ... TSC clock: 1596016188 Hz, i8254 clock: 1193194 Hz

CLK_USE_I8254_CALIBRATION not specified - using default frequency

CLK_USE_TSC_CALIBRATION not specified - using old calibration method

CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.02-MHz 686-class CPU)

Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2

Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>

AMD Features=0x100000<NX>

AMD Features2=0x1<LAHF>

1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size

L2 cache: 512 kbytes, 16-way associative, 64 bytes/line

real memory = 1063712768 (1014 MB)

Physical memory chunk(s):

0x00001000 - 0x0009efff, 647168 bytes (158 pages)

0x00ef8000 - 0x3f6affff, 1048281088 bytes (255928 pages)

avail memory = 1008971776 (962 MB)

ACPI MADT: LAPIC address 0xfee00000, flags 0x1

ACPI MADT: BSP apic id 0

ACPI MADT: cpu id 0, apic id 0

ACPI MADT: cpu id 1, apic id 1

lapic: divisor index 0, frequency 66500292 Hz

SMP: CPU0 apic_initialize():

lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff

SMP: Waiting APs LAPIC initialization

SMP: CPU1 apic_initialize():

lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff

ACPI MADT: warning invalid intsrc irq 9 trig, level

ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0

ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high

ACPI MADT: SCI irq 9, first test level/high

IOAPIC: idx 0, apic id 2, gsi base 0, npin 24

IOAPIC: irq 1, gsi 1 -> cpu0 (fixed)

IOAPIC: irq 1 -> gsi 1 edge/high

IOAPIC: irq 0, gsi 2 -> cpu0 (0)

IOAPIC: irq 0 -> gsi 2 edge/high

IOAPIC: irq 3, gsi 3 -> cpu0 (fixed)

IOAPIC: irq 3 -> gsi 3 edge/high

IOAPIC: irq 4, gsi 4 -> cpu0 (fixed)

IOAPIC: irq 4 -> gsi 4 edge/high

IOAPIC: irq 5, gsi 5 -> cpu0 (fixed)

IOAPIC: irq 5 -> gsi 5 edge/high

IOAPIC: irq 6, gsi 6 -> cpu0 (fixed)

IOAPIC: irq 6 -> gsi 6 edge/high

IOAPIC: irq 7, gsi 7 -> cpu0 (fixed)

IOAPIC: irq 7 -> gsi 7 edge/high

IOAPIC: irq 8, gsi 8 -> cpu0 (fixed)

IOAPIC: irq 8 -> gsi 8 edge/high

IOAPIC: irq 9, gsi 9 -> cpu0 (sci)

IOAPIC: irq 9 -> gsi 9 edge/high

IOAPIC: irq 10, gsi 10 -> cpu0 (fixed)

IOAPIC: irq 10 -> gsi 10 edge/high

IOAPIC: irq 11, gsi 11 -> cpu0 (fixed)

IOAPIC: irq 11 -> gsi 11 edge/high

IOAPIC: irq 12, gsi 12 -> cpu0 (fixed)

IOAPIC: irq 12 -> gsi 12 edge/high

IOAPIC: irq 13, gsi 13 -> cpu0 (fixed)

IOAPIC: irq 13 -> gsi 13 edge/high

IOAPIC: irq 14, gsi 14 -> cpu0 (fixed)

IOAPIC: irq 14 -> gsi 14 edge/high

IOAPIC: irq 15, gsi 15 -> cpu0 (fixed)

IOAPIC: irq 15 -> gsi 15 edge/high

IOAPIC: irq 16, gsi 16 -> cpu0 (fixed)

IOAPIC: irq 16 -> gsi 16 level/low

IOAPIC: irq 17, gsi 17 -> cpu0 (fixed)

IOAPIC: irq 17 -> gsi 17 level/low

IOAPIC: irq 18, gsi 18 -> cpu0 (fixed)

IOAPIC: irq 18 -> gsi 18 level/low

IOAPIC: irq 19, gsi 19 -> cpu0 (fixed)

IOAPIC: irq 19 -> gsi 19 level/low

IOAPIC: irq 20, gsi 20 -> cpu0 (fixed)

IOAPIC: irq 20 -> gsi 20 level/low

IOAPIC: irq 21, gsi 21 -> cpu0 (fixed)

IOAPIC: irq 21 -> gsi 21 level/low

IOAPIC: irq 22, gsi 22 -> cpu0 (fixed)

IOAPIC: irq 22 -> gsi 22 level/low

IOAPIC: irq 23, gsi 23 -> cpu0 (fixed)

IOAPIC: irq 23 -> gsi 23 level/low

IOAPIC: legacy irq max 24

IOAPIC: cpu0 irq 2 reserved

IOAPIC: cpu1 irq 0 reserved

IOAPIC: cpu1 irq 1 reserved

IOAPIC: cpu1 irq 2 reserved

IOAPIC: cpu1 irq 3 reserved

IOAPIC: cpu1 irq 4 reserved

IOAPIC: cpu1 irq 5 reserved

IOAPIC: cpu1 irq 6 reserved

IOAPIC: cpu1 irq 7 reserved

IOAPIC: cpu1 irq 8 reserved

IOAPIC: cpu1 irq 9 reserved

IOAPIC: cpu1 irq 10 reserved

IOAPIC: cpu1 irq 11 reserved

IOAPIC: cpu1 irq 12 reserved

IOAPIC: cpu1 irq 13 reserved

IOAPIC: cpu1 irq 14 reserved

IOAPIC: cpu1 irq 15 reserved

IOAPIC: cpu1 irq 16 reserved

IOAPIC: cpu1 irq 17 reserved

IOAPIC: cpu1 irq 18 reserved

IOAPIC: cpu1 irq 19 reserved

IOAPIC: cpu1 irq 20 reserved

IOAPIC: cpu1 irq 21 reserved

IOAPIC: cpu1 irq 22 reserved

IOAPIC: cpu1 irq 23 reserved

ELCR Found. ISA IRQs programmed as:

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

E E E L E L E E E E L L E E E E

MPTABLE: 0:28 INTA -> IOAPIC 0.17

MPTABLE: 0:27 INTA -> IOAPIC 0.22

MPTABLE: 0:29 INTB -> IOAPIC 0.19

MPTABLE: 0:2 INTA -> IOAPIC 0.16

MPTABLE: 0:28 INTB -> IOAPIC 0.16

MPTABLE: 0:28 INTC -> IOAPIC 0.18

MPTABLE: 0:29 INTA -> IOAPIC 0.23

MPTABLE: 0:29 INTC -> IOAPIC 0.18

MPTABLE: 0:29 INTD -> IOAPIC 0.16

MPTABLE: 0:31 INTB -> IOAPIC 0.19

MPTABLE: 2:0 INTA -> IOAPIC 0.16

Initialize MI interrupts

Finish MP startup

Active CPU Mask: 00000003

bios32: Found BIOS32 Service Directory header at 0xc00f7b10

bios32: Entry = 0xfdc40 (c00fdc40) Rev = 0 Len = 1

pcibios: PCI BIOS entry at 0x221

pnpbios: Found PnP BIOS data at 0xc00f7b80

pnpbios: Entry = f0000:c244 Rev = 1.0

Other BIOS signatures found:

ndepotmags=146 x mag_cap=128 for mbuf

ndepotmags=73 x mag_cap=128 for mbuf pkt hdr

ndepotmags=10 x mag_cap=128 for cluster mbuf

ndepotmags=10 x mag_cap=128 for jcluster mbuf

ndepotmags=10 x mag_cap=128 for mbuf + cluster

ndepotmags=6 x mag_cap=27 for mbuf pkt hdr + cluster

ndepotmags=10 x mag_cap=128 for mbuf + jcluster

ndepotmags=6 x mag_cap=27 for mbuf pkt hdr + jcluster

ndepotmags=6 x mag_cap=22 for sf_buf

ndepotmags=3 x mag_cap=4 for exec-args

ndepotmags=6 x mag_cap=22 for lwbuf

Preloaded elf kernel "kernel" at 0xc0ec8000.

Preloaded elf module "ehci.ko" at 0xc0ec83f0.

BITS within APICID: logical_CPU_bits: 1; core_bits: 0

CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1;

Start scheduler helpers on cpus:

cpu0 - HyperThreading available. Core siblings: cpu0 cpu1

cpu1 - HyperThreading available. Core siblings: cpu0 cpu1

Start scheduler helpers on cpus:

cpu0 - HyperThreading available. Core siblings: cpu0 cpu1

cpu1 - HyperThreading available. Core siblings: cpu0 cpu1

start dummy scheduler helpers on cpus: 0 1

ndepotmags=6 x mag_cap=6 for thread

ndepotmags=6 x mag_cap=22 for dsched-tdio-cache

ndepotmags=6 x mag_cap=22 for dsched-tdctx-cache

ndepotmags=6 x mag_cap=22 for dsched-diskctx-cache

ndepotmags=6 x mag_cap=6 for vmspace

ndepotmags=6 x mag_cap=22 for disk-msg-cache

ndepotmags=6 x mag_cap=22 for devfs-node-cache

ndepotmags=6 x mag_cap=22 for devfs-msg-cache

ndepotmags=6 x mag_cap=22 for devfs-dev-cache

FQ scheduler policy version 1.1 loaded

ndepotmags=6 x mag_cap=22 for proparay

ndepotmags=6 x mag_cap=22 for propdict

ndepotmags=6 x mag_cap=22 for propstng

ndepotmags=6 x mag_cap=6 for devfs

wdog: In-kernel automatic watchdog reset enabled

ndepotmags=6 x mag_cap=22 for pdict128

ndepotmags=6 x mag_cap=22 for pdict32

ndepotmags=6 x mag_cap=22 for propdata

ndepotmags=6 x mag_cap=22 for pdict16

ndepotmags=6 x mag_cap=22 for propnmbr

ndepotmags=6 x mag_cap=22 for devfs-rule-cache

wlan: <802.11 Link Layer>

ndepotmags=6 x mag_cap=22 for ata_request

ndepotmags=6 x mag_cap=22 for ata_composite

No policy for md0 specified, or policy not found

disk scheduler: set policy of md0 to noop

md0: Malloc disk

kbd: new array size 4

kbd1 at kbdmux0

ndepotmags=6 x mag_cap=22 for crypto op

ndepotmags=6 x mag_cap=22 for crypto desc

crypto: <crypto core>

Pentium Pro MTRR support enabled

md0: invalid primary partition table: no magic

Math emulator present

hpt27xx: RocketRAID 27xx controller driver v1.0 (Sep 18 2012 21:47:39)

hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2

IOAPIC: rman cpu0 0 - 1

IOAPIC: rman cpu0 3 - 95

IOAPIC: rman cpu0 97 - 191

IOAPIC: rman cpu1 24 - 95

IOAPIC: rman cpu1 97 - 191

npx0.nexus0.root0

npx0: <math processor> [tentative] on motherboard

npx0: INT 16 interface

Using XMM optimized bcopy/copyin/copyout

npx0: <math processor> [attached!] on motherboard

cryptosoft0.nexus0.root0

cryptosoft0: <software crypto> [tentative] on motherboard

crypto: assign cryptosoft0 driver id 0, flags 234881024

crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0

crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0

cryptosoft0: <software crypto> [attached!] on motherboard

pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa04

pci_open(1a): mode1res=0x80000000 (0x80000000)

pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086)

pcibios: BIOS version 3.00

$PIR: checksum failed!

pcib0.legacy0.nexus0.root0

pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard

pci0.pcib0.legacy0.nexus0.root0

pci0: <PCI bus> [tentative] on pcib0

pci0: domain=0, physical bus=0

found-> vendor=0x8086, dev=0x27ac, revid=0x03

domain=0, bus=0, slot=0, func=0

class=06-00-00, hdrtype=0x00, mfdev=0

cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x27ae, revid=0x03

domain=0, bus=0, slot=2, func=0

class=03-00-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=11

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

map[10]: type Memory, range 32, base 0xf0500000, size 19, enabled

map[14]: type I/O Port, range 32, base 0x1800, size 3, enabled

map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled

map[1c]: type Memory, range 32, base 0xf0600000, size 18, enabled

MPTABLE: 0:2 INTA routed to irq 16

found-> vendor=0x8086, dev=0x27a6, revid=0x03

domain=0, bus=0, slot=2, func=1

class=03-80-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

powerspec 2 supports D0 D3 current D0

map[10]: type Memory, range 32, base 0xf0580000, size 19, enabled

found-> vendor=0x8086, dev=0x27d8, revid=0x02

domain=0, bus=0, slot=27, func=0

class=04-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=5

powerspec 2 supports D0 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.1 cap=0x0091[ROOTDEV]

map[10]: type Memory, range 64, base 0xf0640000, size 14, enabled

MPTABLE: 0:27 INTA routed to irq 22

found-> vendor=0x8086, dev=0x27d0, revid=0x02

domain=0, bus=0, slot=28, func=0

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)

intpin=a, irq=3

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0010a0e0[HOTPLUG]

MPTABLE: 0:28 INTA routed to irq 17

found-> vendor=0x8086, dev=0x27d2, revid=0x02

domain=0, bus=0, slot=28, func=1

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)

intpin=b, irq=11

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0018a0e0[HOTPLUG]

MPTABLE: 0:28 INTB routed to irq 16

found-> vendor=0x8086, dev=0x27d4, revid=0x02

domain=0, bus=0, slot=28, func=2

class=06-04-00, hdrtype=0x01, mfdev=1

cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)

intpin=c, irq=3

powerspec 2 supports D0 D3 current D0

MSI supports 1 message

PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x0020a0e0[HOTPLUG]

MPTABLE: 0:28 INTC routed to irq 18

found-> vendor=0x8086, dev=0x27c8, revid=0x02

domain=0, bus=0, slot=29, func=0

class=0c-03-00, hdrtype=0x00, mfdev=1

cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=5

map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled

MPTABLE: 0:29 INTA routed to irq 23

found-> vendor=0x8086, dev=0x27c9, revid=0x02

domain=0, bus=0, slot=29, func=1

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=10

map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled

MPTABLE: 0:29 INTB routed to irq 19

found-> vendor=0x8086, dev=0x27ca, revid=0x02

domain=0, bus=0, slot=29, func=2

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=c, irq=3

map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled

MPTABLE: 0:29 INTC routed to irq 18

found-> vendor=0x8086, dev=0x27cb, revid=0x02

domain=0, bus=0, slot=29, func=3

class=0c-03-00, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=d, irq=11

map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled

MPTABLE: 0:29 INTD routed to irq 16

found-> vendor=0x8086, dev=0x27cc, revid=0x02

domain=0, bus=0, slot=29, func=7

class=0c-03-20, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=5

powerspec 2 supports D0 D3 current D0

map[10]: type Memory, range 32, base 0xf0844000, size 10, enabled

MPTABLE: 0:29 INTA routed to irq 23

found-> vendor=0x8086, dev=0x2448, revid=0xe2

domain=0, bus=0, slot=30, func=0

class=06-04-01, hdrtype=0x01, mfdev=0

cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x27b9, revid=0x02

domain=0, bus=0, slot=31, func=0

class=06-01-00, hdrtype=0x00, mfdev=1

cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

found-> vendor=0x8086, dev=0x27df, revid=0x02

domain=0, bus=0, slot=31, func=1

class=01-01-8a, hdrtype=0x00, mfdev=0

cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=255

map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled

found-> vendor=0x8086, dev=0x27c4, revid=0x02

domain=0, bus=0, slot=31, func=2

class=01-01-8f, hdrtype=0x00, mfdev=0

cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=10

powerspec 2 supports D0 D3 current D0

map[10]: type I/O Port, range 32, base 0x18c8, size 3, enabled

map[14]: type I/O Port, range 32, base 0x18c0, size 2, enabled

map[18]: type I/O Port, range 32, base 0x18a8, size 3, enabled

map[1c]: type I/O Port, range 32, base 0x180c, size 2, enabled

map[20]: type I/O Port, range 32, base 0x18b0, size 4, enabled

map[24]: type Memory, range 32, base 0xf0844400, size 10, enabled

MPTABLE: 0:31 INTB routed to irq 19

found-> vendor=0x8086, dev=0x27da, revid=0x02

domain=0, bus=0, slot=31, func=3

class=0c-05-00, hdrtype=0x00, mfdev=0

cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=b, irq=10

map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled

MPTABLE: 0:31 INTB routed to irq 19

vgapci0.pci0.pcib0.legacy0.nexus0.root0

vgapci0: <VGA-compatible display> [tentative] port 0x1800-0x1807 mem 0xf0600000-0xf063ffff,0xd0000000-0xdfffffff,0xf0500000-0xf057ffff irq 16 at device 2.0 on pci0

agp0.vgapci0.pci0.pcib0.legacy0.nexus0.root0

agp0: <Intel 945GME SVGA controller> [tentative] on vgapci0

vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000

vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf0500000

vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf0600000

agp0: detected 7932k stolen memory

agp0: aperture size is 256M

agp0: <Intel 945GME SVGA controller> [attached!] on vgapci0

vgapci0: <VGA-compatible display> [attached!] port 0x1800-0x1807 mem 0xf0600000-0xf063ffff,0xd0000000-0xdfffffff,0xf0500000-0xf057ffff irq 16 at device 2.0 on pci0

vgapci1.pci0.pcib0.legacy0.nexus0.root0

vgapci1: <VGA-compatible display> [tentative] mem 0xf0580000-0xf05fffff at device 2.1 on pci0

vgapci1: <VGA-compatible display> [attached!] mem 0xf0580000-0xf05fffff at device 2.1 on pci0

pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 22

pcib1.pci0.pcib0.legacy0.nexus0.root0

pcib1: <MPTABLE PCI-PCI bridge> [tentative] irq 17 at device 28.0 on pci0

pcib1: domain 0

pcib1: secondary bus 2

pcib1: subordinate bus 2

pcib1: I/O decode 0x2000-0x2fff

pcib1: memory decode 0xf0200000-0xf02fffff

pcib1: prefetched decode 0xf0000000-0xf00fffff

pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0

pci2: <PCI bus> [tentative] on pcib1

pci2: domain=0, physical bus=2

found-> vendor=0x14e4, dev=0x1713, revid=0x02

domain=0, bus=2, slot=0, func=0

class=02-00-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=11

powerspec 3 supports D0 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.1 cap=0x0001[DEVICE]

map[10]: type Memory, range 64, base 0xf0200000, size 16, enabled

pcib1: requested memory range 0xf0200000-0xf020ffff: good

MPTABLE: 2:0 INTA routed to irq 16

bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0

bge0: <Broadcom BCM5906M Fast Ethernet> [tentative] mem 0xf0200000-0xf020ffff irq 16 at device 0.0 on pci2

bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf0200000

bge0: adjust device control 0x2000 -> 0x5000

bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E

bge0: enable status tag

bge0: attempting to allocate 1 MSI vector (1 supported)

alloc MSI intr 24 on cpu0

bge0: using IRQ 24 on cpu0 for MSI

alignment check failed

alignment check failed

miibus0.bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0

miibus0: <MII bus> [tentative] on bge0

brgphy0.miibus0.bge0.pci2.pcib1.pci0.pcib0.legacy0.nexus0.root0

brgphy0: <BCM5906 10/100baseTX PHY> [tentative] on miibus0

brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

brgphy0: <BCM5906 10/100baseTX PHY> [attached!] on miibus0

miibus0: <MII bus> [attached!] on bge0

bge0: bpf attached

bge0: MAC address: 00:23:8b:9f:4c:8d

bge0: oneshot MSI

map MSI intr 24 on cpu0

bge0: <Broadcom BCM5906M Fast Ethernet> [attached!] mem 0xf0200000-0xf020ffff irq 24,16 at device 0.0 on pci2

pci2: <PCI bus> [attached!] on pcib1

pcib1: <MPTABLE PCI-PCI bridge> [attached!] irq 17 at device 28.0 on pci0

pcib2.pci0.pcib0.legacy0.nexus0.root0

pcib2: <MPTABLE PCI-PCI bridge> [tentative] irq 16 at device 28.1 on pci0

pcib2: domain 0

pcib2: secondary bus 3

pcib2: subordinate bus 4

pcib2: I/O decode 0x3000-0x3fff

pcib2: memory decode 0xf0300000-0xf03fffff

pcib2: prefetched decode 0xf0100000-0xf01fffff

pci3.pcib2.pci0.pcib0.legacy0.nexus0.root0

pci3: <PCI bus> [tentative] on pcib2

pci3: domain=0, physical bus=3

pci3: <PCI bus> [attached!] on pcib2

pcib2: <MPTABLE PCI-PCI bridge> [attached!] irq 16 at device 28.1 on pci0

pcib3.pci0.pcib0.legacy0.nexus0.root0

pcib3: <MPTABLE PCI-PCI bridge> [tentative] irq 18 at device 28.2 on pci0

pcib3: domain 0

pcib3: secondary bus 5

pcib3: subordinate bus 5

pcib3: I/O decode 0xf000-0xfff

pcib3: memory decode 0xf0400000-0xf04fffff

pcib3: no prefetched decode

pci5.pcib3.pci0.pcib0.legacy0.nexus0.root0

pci5: <PCI bus> [tentative] on pcib3

pci5: domain=0, physical bus=5

found-> vendor=0x14e4, dev=0x4315, revid=0x01

domain=0, bus=5, slot=0, func=0

class=02-80-00, hdrtype=0x00, mfdev=0

cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)

lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)

intpin=a, irq=3

powerspec 3 supports D0 D1 D2 D3 current D0

MSI supports 1 message, 64 bit

PCI Express ver.1 cap=0x0001[DEVICE]

map[10]: type Memory, range 64, base 0xf0400000, size 14, enabled

pcib3: requested memory range 0xf0400000-0xf0403fff: good

MPTABLE: 0:28 INTA routed to irq 17

pcib3: slot 0 INTA is routed to irq 17

pci5: <network> (vendor 0x14e4, dev 0x4315) at device 0.0 irq 17

pci5: <PCI bus> [attached!] on pcib3

pcib3: <MPTABLE PCI-PCI bridge> [attached!] irq 18 at device 28.2 on pci0

uhci0.pci0.pcib0.legacy0.nexus0.root0

uhci0: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1820-0x183f irq 23 at device 29.0 on pci0

uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820

usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

usb0: <Intel 82801G (ICH7) USB controller> [tentative] on uhci0

usb0: USB revision 1.0

uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0

uhub0: 2 ports with 2 removable, self powered

uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0

usb0: <Intel 82801G (ICH7) USB controller> [attached!] on uhci0

uhci0: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1820-0x183f irq 23 at device 29.0 on pci0

uhci1.pci0.pcib0.legacy0.nexus0.root0

uhci1: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1840-0x185f irq 19 at device 29.1 on pci0

uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840

usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0

usb1: <Intel 82801G (ICH7) USB controller> [tentative] on uhci1

usb1: USB revision 1.0

uhub1.usb1.uhci1.pci0.pcib0.legacy0.nexus0.root0

uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1

uhub1: 2 ports with 2 removable, self powered

uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1

usb1: <Intel 82801G (ICH7) USB controller> [attached!] on uhci1

uhci1: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1840-0x185f irq 19 at device 29.1 on pci0

uhci2.pci0.pcib0.legacy0.nexus0.root0

uhci2: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1860-0x187f irq 18 at device 29.2 on pci0

uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860

usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0

usb2: <Intel 82801G (ICH7) USB controller> [tentative] on uhci2

usb2: USB revision 1.0

uhub2.usb2.uhci2.pci0.pcib0.legacy0.nexus0.root0

uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2

uhub2: 2 ports with 2 removable, self powered

uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2

usb2: <Intel 82801G (ICH7) USB controller> [attached!] on uhci2

uhci2: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1860-0x187f irq 18 at device 29.2 on pci0

uhci3.pci0.pcib0.legacy0.nexus0.root0

uhci3: <Intel 82801G (ICH7) USB controller> [tentative] port 0x1880-0x189f irq 16 at device 29.3 on pci0

uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880

usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0

usb3: <Intel 82801G (ICH7) USB controller> [tentative] on uhci3

usb3: USB revision 1.0

uhub3.usb3.uhci3.pci0.pcib0.legacy0.nexus0.root0

uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3

uhub3: 2 ports with 2 removable, self powered

uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3

usb3: <Intel 82801G (ICH7) USB controller> [attached!] on uhci3

uhci3: <Intel 82801G (ICH7) USB controller> [attached!] port 0x1880-0x189f irq 16 at device 29.3 on pci0

ehci0.pci0.pcib0.legacy0.nexus0.root0

ehci0: <Intel 82801GB/R USB 2.0 controller> [tentative] mem 0xf0844000-0xf08443ff irq 23 at device 29.7 on pci0

ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0844000

usb4: waiting for BIOS to give up control

usb4: EHCI version 1.0

usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3

usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0

usb4: <Intel 82801GB/R USB 2.0 controller> [tentative] on ehci0

usb4: USB revision 2.0

uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0

uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [tentative] on usb4

uhub4: 8 ports with 8 removable, self powered

uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> [attached!] on usb4

ugen0.uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0

ugen0: <Image Processor Lenovo EasyCamera, class 239/2, rev 2.00/28.67, addr 2> [tentative] on uhub4

ugen0: <Image Processor Lenovo EasyCamera, class 239/2, rev 2.00/28.67, addr 2> [attached!] on uhub4

ums0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [tentative] on uhub0

ums0: 3 buttons and Z dir.

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [attached!] on uhub0

umass0.uhub4.usb4.ehci0.pci0.pcib0.legacy0.nexus0.root0

umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 3> [tentative] on uhub4

umass0:0:0:-1: Attached to scbus0

umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/58.87, addr 3> [attached!] on uhub4

usb4: <Intel 82801GB/R USB 2.0 controller> [attached!] on ehci0

ehci0: <Intel 82801GB/R USB 2.0 controller> [attached!] mem 0xf0844000-0xf08443ff irq 23 at device 29.7 on pci0

pcib4.pci0.pcib0.legacy0.nexus0.root0

pcib4: <MPTABLE PCI-PCI bridge> [tentative] at device 30.0 on pci0

pcib4: domain 0

pcib4: secondary bus 6

pcib4: subordinate bus 6

pcib4: I/O decode 0x0-0x0

pcib4: no prefetched decode

pcib4: Subtractively decoded bridge.

pci6.pcib4.pci0.pcib0.legacy0.nexus0.root0

pci6: <PCI bus> [tentative] on pcib4

pci6: domain=0, physical bus=6

pci6: <PCI bus> [attached!] on pcib4

pcib4: <MPTABLE PCI-PCI bridge> [attached!] at device 30.0 on pci0

isab0.pci0.pcib0.legacy0.nexus0.root0

isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0

isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

isa0: <ISA bus> [tentative] on isab0

isa0: <ISA bus> [attached!] on isab0

isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0

atapci0.pci0.pcib0.legacy0.nexus0.root0

atapci0: <Intel ICH7 UDMA100 controller> [tentative] port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0

atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810

ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0

ata0: <ATA channel 0> [tentative] on atapci0

atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0

atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6

ata0: reset tp1 mask=03 ostat0=34 ostat1=34

ata0: stat0=0x50 err=0x50 lsb=0x50 msb=0x50

ata0: stat1=0x0f err=0x0f lsb=0x0f msb=0x0f

ata0: stat1=0x60 err=0x60 lsb=0x60 msb=0x60

ata0: reset tp2 stat0=50 stat1=60 devices=0x0

ata0: <ATA channel 0> [attached!] on atapci0

ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0

ata1: <ATA channel 1> [tentative] on atapci0

atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170

atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376

ata1: reset tp1 mask=00 ostat0=ff ostat1=ff

ata1: <ATA channel 1> [attached!] on atapci0

atapci0: <Intel ICH7 UDMA100 controller> [attached!] port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0

atapci1.pci0.pcib0.legacy0.nexus0.root0

atapci1: <Intel ICH7M SATA300 controller> [tentative] port 0x18b0-0x18bf,0x180c-0x180f,0x18a8-0x18af,0x18c0-0x18c3,0x18c8-0x18cf mem 0xf0844400-0xf08447ff irq 19 at device 31.2 on pci0

atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0

atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf0844400

atapci1: AHCI called from vendor specific driver

atapci1: AHCI Version 01.10 controller with 4 ports detected

ata2.atapci1.pci0.pcib0.legacy0.nexus0.root0

ata2: <ATA channel 0> [tentative] on atapci1

ata2: SATA connect time=0ms

ata2: ahci_reset devices=0x1<ATA_MASTER>

ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire

No policy for ad4 specified, or policy not found

disk scheduler: set policy of ad4 to noop

ad4: Intel check1 failed

ad4: Adaptec check1 failed

ad4: LSI (v3) check1 failed

ad4: LSI (v2) check1 failed

ad4: FreeBSD check1 failed

ad4: 152627MB <WDC WD1600BEVT-22ZCT0 11.01A11> at ata2-master SATA150

ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue

ata2: <ATA channel 0> [attached!] on atapci1

ata3.atapci1.pci0.pcib0.legacy0.nexus0.root0

ata3: <ATA channel 1> [tentative] on atapci1

ata3: port not implemented

ata3: <ATA channel 1> [attached!] on atapci1

ata4.atapci1.pci0.pcib0.legacy0.nexus0.root0

ata4: <ATA channel 2> [tentative] on atapci1

ata4: SATA connect status=00000000

ata4: ahci_reset devices=0x0

ata4: <ATA channel 2> [attached!] on atapci1

ata5.atapci1.pci0.pcib0.legacy0.nexus0.root0

ata5: <ATA channel 3> [tentative] on atapci1

ata5: port not implemented

ata5: <ATA channel 3> [attached!] on atapci1

atapci1: <Intel ICH7M SATA300 controller> [attached!] port 0x18b0-0x18bf,0x180c-0x180f,0x18a8-0x18af,0x18c0-0x18c3,0x18c8-0x18cf mem 0xf0844400-0xf08447ff irq 19 at device 31.2 on pci0

pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19

pci0: <PCI bus> [attached!] on pcib0

pcib0: <MPTABLE Host-PCI bridge> [attached!] pcibus 0 on motherboard

Trying Read_Port at 203

Trying Read_Port at 243

Trying Read_Port at 283

Trying Read_Port at 2c3

Trying Read_Port at 303

Trying Read_Port at 343

Trying Read_Port at 383

Trying Read_Port at 3c3

ex_isa_identify()

isa_probe_children: disabling PnP devices

isa_probe_children: probing non-PnP devices

orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

orm0: <Option ROMs> [tentative] at iomem 0xdf000-0xdf7ff,0xe0000-0xe17ff on isa0

orm0: <Option ROMs> [attached!] at iomem 0xdf000-0xdf7ff,0xe0000-0xe17ff on isa0

fdc0: ready for input in output

fdc0: cmd 3 failed at out byte 1 of 3

fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0

adv0 [tentative] failed to probe on isa0

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x330

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x334

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x230

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x234

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x130

bt0: Failed Status Reg Test - ff

bt_isa_probe: Probe failed at 0x134

bt0 [tentative] failed to probe at port 0x134-0x137 on isa0

atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0

atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0

atkbd: the current kbd controller command byte 0047

atkbd: keyboard ID 0x41ab (2)

kbd0 at atkbd0

kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000

atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0

psm0: current command byte:0047

ad4: type 0xc, start 63, end = 78124094, size 78124032

ad4: C/H/S end 1023/0/63 (16499006) != end 78124094: invalid

ad4: type 0x5, start 78124156, end = 217921724, size 139797569

ad4: C/H/S start 1023/254/63 (16515008) != start 78124156: invalid

ad4: C/H/S end 1023/2/63 (16499132) != end 217921724: invalid

ad4: type 0x12, start 281638912, end = 312581807, size 30942896

ad4: C/H/S end 1023/15/63 (16499951) != end 312581807: invalid

ad4: type 0xa5, start 217921725, end = 281635514, size 63713790 : OK

ad4: type 0x83, start 78124158, end = 140616944, size 62492787

ad4: C/H/S start 1023/254/63 (16515008) != start 78124158: invalid

ad4: C/H/S end 1023/254/63 (16515008) != end 140616944: invalid

ad4<extended>: type 0x5, start 140616945, end = 208973519, size 68356575

ad4<extended>: C/H/S start 1023/254/63 (16515008) != start 140616945: invalid

ad4<extended>: C/H/S end 1023/254/63 (16515008) != end 208973519: invalid

ad4: type 0x7, start 140617008, end = 208973519, size 68356512

ad4: C/H/S start 1023/254/63 (16515008) != start 140617008: invalid

ad4: C/H/S end 1023/254/63 (16515008) != end 208973519: invalid

ad4<extended>: type 0x5, start 208973520, end = 217921724, size 8948205

ad4<extended>: C/H/S start 1023/254/63 (16515008) != start 208973520: invalid

ad4<extended>: C/H/S end 1023/254/63 (16515008) != end 217921724: invalid

ad4: type 0x82, start 208973583, end = 217921724, size 8948142

ad4: C/H/S start 1023/254/63 (16515008) != start 208973583: invalid

ad4: C/H/S end 1023/254/63 (16515008) != end 217921724: invalid

psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0

psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons

psm0: config:00000000, flags:00000008, packet size:3

psm0: syncmask:c0, syncbits:00

psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0

atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0

vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

fb0: vga0, vga, type:VGA (5), flags:0x7007f

fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000

fb0: init mode:24, bios mode:3, current mode:24

fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k

VGA parameters upon power-up

50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters in BIOS for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

VGA parameters to be used for mode 24

50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81

bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96

b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c

3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff

vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

sc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0

sc0: <System console> [tentative] at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)

sc0: <System console> [attached!] at flags 0x100 on isa0

lm0 [tentative] failed to probe at port 0x290-0x297 on isa0

it0 [tentative] failed to probe at port 0x290-0x297 on isa0

it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0

it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0

it3 [tentative] failed to probe at port 0x228-0x22f on isa0

wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0

wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0

sio0: can't drain, serial port might not exist, disabling

sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

sio1: can't drain, serial port might not exist, disabling

sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0

sio2: not probed (disabled)

sio3: not probed (disabled)

ppc0: parallel port not found.

ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0

ed0: not probed (disabled)

fe0: not probed (disabled)

lnc0: not probed (disabled)

cs0: not probed (disabled)

sn0: not probed (disabled)

isa_probe_children: probing PnP devices

BIOS Geometries:

0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors

0 accounted for

Device configuration finished.

ndepotmags=6 x mag_cap=22 for nameibufs

ndepotmags=6 x mag_cap=22 for NFS mount

ndepotmags=6 x mag_cap=22 for NFS node

ndepotmags=6 x mag_cap=43 for vnodes

ndepotmags=6 x mag_cap=22 for UFS dirhash

crypto: <crypto device>

faith0: bpf attached

lo0: bpf attached

ppp0: bpf attached

sl0: bpf attached

hpt27xx: no controller detected.

hptrr: no controller detected.

CAM: Configuring bus: umass-sim0

CAM: Configuring bus: ata1

CAM: Configuring bus: ata2

CAM: Configuring bus: ata3

CAM: Configuring bus: ata4

CAM: Configuring bus: ata5

CAM: Configuring 6 busses

CAM: Finished configuring bus: ata0

CAM: Finished configuring bus: ata1

CAM: Finished configuring bus: ata2

CAM: Finished configuring bus: ata3

CAM: Finished configuring bus: ata4

CAM: Finished configuring bus: ata5

CAM: finished configuring all busses

bootdev: a0500000 type=0 unit=0 slice=5 part=0 major=3

pass8 at umass-sim0 bus 0 target 0 lun 0

pass8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device

pass8: 40.000MB/s transfers

ATA PseudoRAID loaded

sg8 at umass-sim0 bus 0 target 0 lun 0

sg8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device

sg8: 40.000MB/s transfers

No policy for da8 specified, or policy not found

disk scheduler: set policy of da8 to noop

cam_periph_alloc: attempt to re-allocate valid device sg8 rejected

sgasync: Unable to attach new device due to status 0x6: CCB request was invalid

CAM: Finished configuring bus: umass-sim0

(da8:umass-sim0:0:0:0): error 6

(da8:umass-sim0:0:0:0): Unretryable Error

da8 at umass-sim0 bus 0 target 0 lun 0

da8: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device

da8: 40.000MB/s transfers

da8: Attempt to query device size failed: NOT READY, Medium not present

Mounting root from ufs:/dev/serno/WD-WXE409VMC423.s4a

WARNING: was not properly dismounted

DMA space used: 4452k, remaining available: 16384k

Mounting devfs

start_init: trying /sbin/init

ums0: at uhub0 port 2 (addr 2) disconnected

ums0: detached

ums0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [tentative] on uhub0

ums0: 3 buttons and Z dir.

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [attached!] on uhub0

ums0: at uhub0 port 2 (addr 2) disconnected

ums0: detached

ums0.uhub0.usb0.uhci0.pci0.pcib0.legacy0.nexus0.root0

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [tentative] on uhub0

ums0: 3 buttons and Z dir.

ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 2> [attached!] on uhub0

bge0: MSI_MODE: 0x2

bge0: link DOWN

bge0: link UP