Project

General

Profile

Actions
Copy link

Bug #1171

closed

4) watchdog timeouts after a short time

Added by josepht over 15 years ago. Updated over 15 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
Due date:
% Done:

0%

Estimated time:

Description

I upgraded my 2.1-DEVELOPMENT box from 2.1-DEVELOPMENT from several
months ago and my re(4) a RTL8101E card only works for a few seconds
after boot. After which I get watchdog timeouts and am unable to ping
a remote host. I was unable to get any information from tcpdump.
Here is the relevant verbose dmesg output and sysctl output. I have
tried disabling rx/tx csum and vlan{mtu,hwtagging} all to no avail. Let
me know what further info is needed.

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet6 fe80::2a0:d1ff:fe60:25a3%re0 prefixlen 64 scopeid 0x1
inet x.x.x.x netmask 0xffffffc0 broadcast x.x.x.x
ether 00:a0:d1:60:25:a3
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active

Joe

Files

Download all files
re_dmesg_verbose.txt (773 Bytes) re_dmesg_verbose.txt josepht, 12/02/2008 11:03 PM
re_sysctl.txt (90 Bytes) re_sysctl.txt josepht, 12/02/2008 11:03 PM
re.diff (380 Bytes) re.diff sepherosa, 12/03/2008 03:36 AM
Actions
Copy link

Also available in: Atom PDF