Bug #228
closed
Executed AML Breakpoint opcode
Added by elekktretterr over 18 years ago. Updated about 18 years ago.
0%
Description
Hi,
I got my self a smp server box today, a HP Netserver LP 1000r and Im
trying to install DragonFly on it but booting with ACPI brings me to do
the debugger. The message is:
......
acpi0: <HP HWPC213> on motherboard
Debugger("Executed AML Breakpoing opcode")
Stopped at Debugger+0x44: movb $0,in_Debugger.0
Typing "continue" loads up the livecd, so I look through dmesg and
theres this interesting message.
WARNING: ACPI is disabling APM's device You can't run both
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPE
I hope someone can pick this up and fix it as this box works well in
FreeBSD 6.x.
Tell me what you want me to do and I will do it just to get this fixed.
Thanks!
Petr
Updated by qhwt+dfly over 18 years ago
On Thu, Jul 06, 2006 at 12:54:47AM +1000, Petr Janda wrote:
Hi,
I got my self a smp server box today, a HP Netserver LP 1000r and Im
trying to install DragonFly on it but booting with ACPI brings me to do
the debugger. The message is:......
acpi0: <HP HWPC213> on motherboard
Debugger("Executed AML Breakpoing opcode")
Stopped at Debugger+0x44: movb $0,in_Debugger.0
Here's a summary from Martin P. Hellwig two years ago about this
breakpoint issue:
http://leaf.dragonflybsd.org/mailarchive/bugs/2004-08/msg00119.html
I'll commit a fix for this now, thanks for the report.
WARNING: ACPI is disabling APM's device You can't run both
This is harmless.
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPE
I wonder if Martin also saw this message at that time.
Updated by elekktretterr over 18 years ago
Hi there,
The fix has fixed the breakpoint. However, dmesg still says
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPE
Can anyone have look at it and explain to me why this shows up, and fix it possibly?
Cheers
YONETANI Tomokazu wrote:
On Thu, Jul 06, 2006 at 12:54:47AM +1000, Petr Janda wrote:
Hi,
I got my self a smp server box today, a HP Netserver LP 1000r and Im
trying to install DragonFly on it but booting with ACPI brings me to do
the debugger. The message is:......
acpi0: <HP HWPC213> on motherboard
Debugger("Executed AML Breakpoing opcode")
Stopped at Debugger+0x44: movb $0,in_Debugger.0Here's a summary from Martin P. Hellwig two years ago about this
breakpoint issue:
http://leaf.dragonflybsd.org/mailarchive/bugs/2004-08/msg00119.htmlI'll commit a fix for this now, thanks for the report.
WARNING: ACPI is disabling APM's device You can't run both
This is harmless.
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPEI wonder if Martin also saw this message at that time.
Updated by qhwt+dfly over 18 years ago
On Thu, Jul 06, 2006 at 06:54:36PM +1000, Petr Janda wrote:
The fix has fixed the breakpoint. However, dmesg still says
unknown: I/O range not supported
This is the same on FreeBSD - acpi_res_set_iorange() is the function
printing this message. It's been implemented as that way for years.
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPE
There's several places in ACPI-CA code where it can display this message,
so I'd look at a verbose dmesg output with the following variables set
at boot prompt(don't try to post it to the mailing list) to find which
function in ACPI-CA code is showing the message:
debug.acpi.layer="ACPI_RESOURCES"
debug.acpi.level="ACPI_LV_FUNCTIONS"Can anyone have look at it and explain to me why this shows up, and fix it
possibly?
They're probably as harmless as they are on FreeBSD.
Quickest workaround I can think of is to set
debug.acpi.disabled="resource"
in /boot/loader.conf, but I'm not sure if it has any side effect.
If you're not seeing any problem other than the annoying warning
messages and the LPT port, you can ignore them.
Updated by elekktretterr over 18 years ago
Hmm, Ive set
debug.acpi.disabled="resource"
in boot /boot/loader.conf and /boot/defaults/loader.conf but the message is still there.
Putting
debug.acpi.layer="ACPI_RESOURCES"
debug.acpi.level="ACPI_LV_FUNCTIONS"
in there also seems to have no effect.
YONETANI Tomokazu wrote:
On Thu, Jul 06, 2006 at 06:54:36PM +1000, Petr Janda wrote:
The fix has fixed the breakpoint. However, dmesg still says
unknown: I/O range not supported
This is the same on FreeBSD - acpi_res_set_iorange() is the function
printing this message. It's been implemented as that way for years.can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPEThere's several places in ACPI-CA code where it can display this message,
so I'd look at a verbose dmesg output with the following variables set
at boot prompt(don't try to post it to the mailing list) to find which
function in ACPI-CA code is showing the message:debug.acpi.layer="ACPI_RESOURCES"
debug.acpi.level="ACPI_LV_FUNCTIONS"Can anyone have look at it and explain to me why this shows up, and fix it
possibly?They're probably as harmless as they are on FreeBSD.
Quickest workaround I can think of is to set
debug.acpi.disabled="resource"
in /boot/loader.conf, but I'm not sure if it has any side effect.
If you're not seeing any problem other than the annoying warning
messages and the LPT port, you can ignore them.
Updated by qhwt+dfly over 18 years ago
On Thu, Jul 06, 2006 at 10:59:51PM +1000, Petr Janda wrote:
debug.acpi.disabled="resource"
Oops, that should've been "sysresource" (it's written in acpi(4) BTW).
in boot /boot/loader.conf and /boot/defaults/loader.conf but the message is
still there.Putting
debug.acpi.layer="ACPI_RESOURCES"
debug.acpi.level="ACPI_LV_FUNCTIONS"in there also seems to have no effect.
Oops, I forgot saying that you need to reinstall acpi.ko with
debugging enabled to use them:
cd /sys/dev/acpica5
setenv ACPI_DEBUG yes
setenv MAKEOBJDIRPREFIX /usr/obj
make obj && make depend && make && make install
But then of course, it starts dropping into the debugger at the
breakpoint opcode on every reboot :) You might want to create
a custom AML like Martin did.
Updated by elekktretterr over 18 years ago
Do i need to recompile acpi.ko for this one too? Because it still doesnt
work and I dont have the system connected to the internet at the moment
so I cant get the source now.
YONETANI Tomokazu wrote:
On Thu, Jul 06, 2006 at 10:59:51PM +1000, Petr Janda wrote:
debug.acpi.disabled="resource"
Oops, that should've been "sysresource" (it's written in acpi(4) BTW).
Updated by qhwt+dfly over 18 years ago
On Thu, Jul 06, 2006 at 11:42:36PM +1000, Petr Janda wrote:
debug.acpi.disabled="resource"
Oops, that should've been "sysresource" (it's written in acpi(4) BTW).
Do i need to recompile acpi.ko for this one too?
No, debug.acpi.disabled works without ACPI_DEBUG. But you need "set"
in front of it (in case you never used the boot loader prompt before):
set debug.acpi.disabled="sysresource"
Cheers.
Updated by mhellwig over 18 years ago
YONETANI Tomokazu wrote:
On Thu, Jul 06, 2006 at 12:54:47AM +1000, Petr Janda wrote:
Hi,
I got my self a smp server box today, a HP Netserver LP 1000r and Im
trying to install DragonFly on it but booting with ACPI brings me to do
the debugger. The message is:......
acpi0: <HP HWPC213> on motherboard
Debugger("Executed AML Breakpoing opcode")
Stopped at Debugger+0x44: movb $0,in_Debugger.0Here's a summary from Martin P. Hellwig two years ago about this
breakpoint issue:
http://leaf.dragonflybsd.org/mailarchive/bugs/2004-08/msg00119.htmlI'll commit a fix for this now, thanks for the report.
WARNING: ACPI is disabling APM's device You can't run both
This is harmless.
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPEI wonder if Martin also saw this message at that time.
If I remember correctly I saw indeed these kind of messages.
At this moment that box is happily running FBSD 6.1.
But I will reinstall df next week, it's about time I'll dig into it
again (it's a personal test box).
Updated by elekktretterr over 18 years ago
That would be great Martin. I just dont have time for all that debugging
at the moment myself.
Petr
YONETANI Tomokazu wrote:
On Thu, Jul 06, 2006 at 12:54:47AM +1000, Petr Janda wrote:
Hi,
I got my self a smp server box today, a HP Netserver LP 1000r and Im
trying to install DragonFly on it but booting with ACPI brings me to do
the debugger. The message is:......
acpi0: <HP HWPC213> on motherboard
Debugger("Executed AML Breakpoing opcode")
Stopped at Debugger+0x44: movb $0,in_Debugger.0Here's a summary from Martin P. Hellwig two years ago about this
breakpoint issue:
http://leaf.dragonflybsd.org/mailarchive/bugs/2004-08/msg00119.htmlI'll commit a fix for this now, thanks for the report.
WARNING: ACPI is disabling APM's device You can't run both
This is harmless.
unknown: I/O range not supported
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ -
AE_AML_INVALID_RESOURCE_TYPEI wonder if Martin also saw this message at that time.
If I remember correctly I saw indeed these kind of messages.
At this moment that box is happily running FBSD 6.1.
But I will reinstall df next week, it's about time I'll dig into it
again (it's a personal test box).--
mph