Bug #2585
open
Dfly 3.4.3 on ESXi 5.1, HP Smart Array P410 passthrough recognised, but not functioning
Added by yggdrasil over 10 years ago.
Updated almost 2 years ago.
Description
Just installed 3.4.3 in an ESXi on Proliant DL180G6. I wanted to use 3 disks attached to the Smart Array P410 in RAID5 mode solely for Dfly/HAMMER for backup purposes, so I configured it as passthrough in ESXi, rebooted and installed Dfly. Neither during installation, nor afterwards could I access the RAID5 array on the P410. ciss0 gets created, but seems to be malfunctioning. During boot, Dfly waits for some time after the line
ciss0: PERFORMANT Transport
before continuing.
Could #1579 be related?
All the best
Files
|
dmesg (8.93 KB)
dmesg |
|
yggdrasil, 09/25/2013 10:17 AM
|
|
ciss0: error sending BMIC ID_CTLR command (35)
device_probe_and_attach: ciss0 attach returned 35
This is definitely relevant. It fails to attach. I will take a look on the weekend with my ciss controller.
If #1579 is related, no clue. The driver was updated after #1579 but it isn't clear if it helped with Tomaž' issues.
Sascha
On Tue, 08 Oct 2013 21:45:49 +0200,
wrote:
Issue #2585 has been updated by yggdrasil.
swildner wrote:
Please try
http://leaf.dragonflybsd.org/~swildner/0001-WIP-ciss-4-Bring-in-some-FreeBSD-fixes.patch
I hope I applied the patch and followed man build correctly, but this
didn't change anything. For now, I replaced the card with a 3ware, here
at least the passthrough works properly, only the 3dm2 tool to manage it
seg faults on start.
Can you please try it with "hw.ciss.force_interrupt=1" in
/boot/loader.conf?
Sascha
Also available in: Atom
PDF
Updated by 
Updated by 
Updated by