Project

General

Profile

Actions
Copy link

Bug #324

closed

No sound on ICH4 when snd_ich loaded after acpi on T41p

Added by dgerow over 17 years ago. Updated over 17 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
Due date:
% Done:

0%

Estimated time:

Description

I've just installed 1.6.1 on an IBM T41p (type 2373), and sound doesn't work
if snd_ich.ko is loaded after acpi.ko.

If I boot the system normally, then load snd_ich.ko, the module loads, but
nothing is registered to dmesg, and the contents of /dev/sndstat are:

FreeBSD Audio Driver (newpcm)
    Installed devices:

And that's it. If I load snd_ich.ko via loader.conf, I get full sound
without issue (see attachments for details). However, if I remove
snd_ich.ko and snd_pcm.ko, then reload them, I see the same as before: they
load, but register nothing to dmesg, and nothing shows up in /dev/sndstat.

Attachments can also be found at:

<https://yibbidy.afflictions.org/~dgerow/itsdloan30-lt/uname.txt>
    <https://yibbidy.afflictions.org/~dgerow/itsdloan30-lt/dmesg.txt>
    <https://yibbidy.afflictions.org/~dgerow/itsdloan30-lt/pciconf.txt>

in case they don't read properly as attachments.

Files

Download all files
dmesg.txt (27.4 KB) dmesg.txt dgerow, 09/21/2006 10:28 PM
pciconf.txt (3.77 KB) pciconf.txt dgerow, 09/21/2006 10:28 PM
uname.txt (172 Bytes) uname.txt dgerow, 09/21/2006 10:28 PM
Actions
Copy link

Also available in: Atom PDF