Project

General

Profile

Bug #2827 ยป Xorg.13.log

with xf86-video-intel installed - masu, 06/12/2015 06:38 AM

 
1
[   639.113] 
2
X.Org X Server 1.14.7
3
Release Date: 2014-06-05
4
[   639.113] X Protocol Version 11, Revision 0
5
[   639.113] Build Operating System: DragonFly 4.1-DEVELOPMENT x86_64 
6
[   639.113] Current Operating System: DragonFly MisterX 4.3-DEVELOPMENT DragonFly v4.3.0.7.gba19d-DEVEL x86_64
7
[   639.114] Build Date: 07 June 2015  09:12:01AM
8
[   639.114]  
9
[   639.114] Current version of pixman: 0.32.6
10
[   639.114] 	Before reporting problems, check http://wiki.x.org
11
	to make sure that you have the latest version.
12
[   639.114] Markers: (--) probed, (**) from config file, (==) default setting,
13
	(++) from command line, (!!) notice, (II) informational,
14
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
15
[   639.114] (==) Log file: "/var/log/Xorg.13.log", Time: Fri Jun 12 15:17:31 2015
16
[   639.115] (II) Loader magic: 0x8084c0
17
[   639.115] (II) Module ABI versions:
18
[   639.115] 	X.Org ANSI C Emulation: 0.4
19
[   639.115] 	X.Org Video Driver: 14.1
20
[   639.115] 	X.Org XInput driver : 19.1
21
[   639.115] 	X.Org Server Extension : 7.0
22
[   639.115] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8000000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/65536
23
[   639.115] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576
24
[   639.116] (==) Using default built-in configuration (30 lines)
25
[   639.116] (==) --- Start of built-in configuration ---
26
[   639.116] 	Section "Device"
27
[   639.116] 		Identifier	"Builtin Default intel Device 0"
28
[   639.116] 		Driver	"intel"
29
[   639.116] 	EndSection
30
[   639.116] 	Section "Screen"
31
[   639.116] 		Identifier	"Builtin Default intel Screen 0"
32
[   639.116] 		Device	"Builtin Default intel Device 0"
33
[   639.116] 	EndSection
34
[   639.116] 	Section "Device"
35
[   639.116] 		Identifier	"Builtin Default vesa Device 0"
36
[   639.116] 		Driver	"vesa"
37
[   639.116] 	EndSection
38
[   639.116] 	Section "Screen"
39
[   639.116] 		Identifier	"Builtin Default vesa Screen 0"
40
[   639.116] 		Device	"Builtin Default vesa Device 0"
41
[   639.116] 	EndSection
42
[   639.116] 	Section "Device"
43
[   639.116] 		Identifier	"Builtin Default fbdev Device 0"
44
[   639.116] 		Driver	"fbdev"
45
[   639.116] 	EndSection
46
[   639.116] 	Section "Screen"
47
[   639.116] 		Identifier	"Builtin Default fbdev Screen 0"
48
[   639.116] 		Device	"Builtin Default fbdev Device 0"
49
[   639.116] 	EndSection
50
[   639.116] 	Section "ServerLayout"
51
[   639.116] 		Identifier	"Builtin Default Layout"
52
[   639.116] 		Screen	"Builtin Default intel Screen 0"
53
[   639.116] 		Screen	"Builtin Default vesa Screen 0"
54
[   639.116] 		Screen	"Builtin Default fbdev Screen 0"
55
[   639.116] 	EndSection
56
[   639.116] (==) --- End of built-in configuration ---
57
[   639.117] (==) ServerLayout "Builtin Default Layout"
58
[   639.117] (**) |-->Screen "Builtin Default intel Screen 0" (0)
59
[   639.117] (**) |   |-->Monitor "<default monitor>"
60
[   639.117] (**) |   |-->Device "Builtin Default intel Device 0"
61
[   639.117] (==) No monitor specified for screen "Builtin Default intel Screen 0".
62
	Using a default monitor configuration.
63
[   639.117] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
64
[   639.117] (**) |   |-->Monitor "<default monitor>"
65
[   639.117] (**) |   |-->Device "Builtin Default vesa Device 0"
66
[   639.117] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
67
	Using a default monitor configuration.
68
[   639.117] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
69
[   639.117] (**) |   |-->Monitor "<default monitor>"
70
[   639.117] (**) |   |-->Device "Builtin Default fbdev Device 0"
71
[   639.117] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
72
	Using a default monitor configuration.
73
[   639.117] (==) Automatically adding devices
74
[   639.117] (==) Automatically enabling devices
75
[   639.117] (==) Not automatically adding GPU devices
76
[   639.118] (==) FontPath set to:
77
	/usr/local/share/fonts/misc/,
78
	/usr/local/share/fonts/TTF/,
79
	/usr/local/share/fonts/OTF/,
80
	/usr/local/share/fonts/Type1/,
81
	/usr/local/share/fonts/100dpi/,
82
	/usr/local/share/fonts/75dpi/
83
[   639.118] (==) ModulePath set to "/usr/local/lib/xorg/modules"
84
[   639.118] (II) The server relies on devd to provide the list of input devices.
85
	If no devices become available, reconfigure devd or disable AutoAddDevices.
86
[   639.118] Initializing built-in extension Generic Event Extension
87
[   639.118] Initializing built-in extension SHAPE
88
[   639.118] Initializing built-in extension MIT-SHM
89
[   639.118] Initializing built-in extension XInputExtension
90
[   639.118] Initializing built-in extension XTEST
91
[   639.118] Initializing built-in extension BIG-REQUESTS
92
[   639.118] Initializing built-in extension SYNC
93
[   639.118] Initializing built-in extension XKEYBOARD
94
[   639.118] Initializing built-in extension XC-MISC
95
[   639.118] Initializing built-in extension XINERAMA
96
[   639.118] Initializing built-in extension XFIXES
97
[   639.118] Initializing built-in extension RENDER
98
[   639.118] Initializing built-in extension RANDR
99
[   639.118] Initializing built-in extension COMPOSITE
100
[   639.118] Initializing built-in extension DAMAGE
101
[   639.118] Initializing built-in extension MIT-SCREEN-SAVER
102
[   639.118] Initializing built-in extension DOUBLE-BUFFER
103
[   639.118] Initializing built-in extension RECORD
104
[   639.118] Initializing built-in extension DPMS
105
[   639.118] Initializing built-in extension X-Resource
106
[   639.118] Initializing built-in extension XVideo
107
[   639.118] Initializing built-in extension XVideo-MotionCompensation
108
[   639.118] Initializing built-in extension XFree86-VidModeExtension
109
[   639.118] Initializing built-in extension XFree86-DGA
110
[   639.118] Initializing built-in extension XFree86-DRI
111
[   639.118] Initializing built-in extension DRI2
112
[   639.119] (II) LoadModule: "glx"
113
[   639.119] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
114
[   639.119] (II) Module glx: vendor="X.Org Foundation"
115
[   639.119] 	compiled for 1.14.7, module version = 1.0.0
116
[   639.119] 	ABI class: X.Org Server Extension, version 7.0
117
[   639.119] (==) AIGLX enabled
118
[   639.119] Loading extension GLX
119
[   639.119] (II) LoadModule: "intel"
120
[   639.120] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
121
[   639.120] (II) Module intel: vendor="X.Org Foundation"
122
[   639.120] 	compiled for 1.14.7, module version = 2.99.916
123
[   639.120] 	Module class: X.Org Video Driver
124
[   639.120] 	ABI class: X.Org Video Driver, version 14.1
125
[   639.121] (II) LoadModule: "vesa"
126
[   639.121] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
127
[   639.121] (II) Module vesa: vendor="X.Org Foundation"
128
[   639.121] 	compiled for 1.14.7, module version = 2.3.3
129
[   639.121] 	Module class: X.Org Video Driver
130
[   639.121] 	ABI class: X.Org Video Driver, version 14.1
131
[   639.121] (II) LoadModule: "fbdev"
132
[   639.122] (WW) Warning, couldn't open module fbdev
133
[   639.122] (II) UnloadModule: "fbdev"
134
[   639.122] (II) Unloading fbdev
135
[   639.122] (EE) Failed to load module "fbdev" (module does not exist, 0)
136
[   639.122] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
137
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
138
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
139
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
140
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
141
[   639.123] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
142
[   639.123] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
143
[   639.123] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
144
[   639.123] (II) VESA: driver for VESA chipsets: vesa
145
[   639.123] (--) Using syscons driver with X support (version 2.0)
146
[   639.123] (--) using VT number 9
147

    
148
[   641.912] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
149
[   641.912] (WW) Falling back to old probe method for vesa
150
[   641.912] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
151
[   641.913] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
152
[   641.913] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
153
[   641.913] (II) intel(0): Creating default Display subsection in Screen section
154
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
155
[   641.913] (==) intel(0): Depth 24, (--) framebuffer bpp 32
156
[   641.913] (==) intel(0): RGB weight 888
157
[   641.913] (==) intel(0): Default visual is TrueColor
158
[   641.913] (II) intel(0): Output LVDS1 has no monitor section
159
[   641.914] (II) intel(0): Enabled output LVDS1
160
[   641.914] (II) intel(0): Output VGA1 has no monitor section
161
[   641.914] (II) intel(0): Enabled output VGA1
162
[   641.914] (--) intel(0): Using a maximum size of 64x64 for hardware cursors
163
[   641.914] (II) intel(0): Output VIRTUAL1 has no monitor section
164
[   641.914] (II) intel(0): Enabled output VIRTUAL1
165
[   641.914] (II) intel(0): EDID for output LVDS1
166
[   641.914] (II) intel(0): Manufacturer: LEN  Model: 4000  Serial#: 0
167
[   641.914] (II) intel(0): Year: 2005  Week: 0
168
[   641.914] (II) intel(0): EDID Version: 1.3
169
[   641.914] (II) intel(0): Digital Display Input
170
[   641.914] (II) intel(0): Max Image Size [cm]: horiz.: 25  vert.: 18
171
[   641.914] (II) intel(0): Gamma: 2.20
172
[   641.914] (II) intel(0): DPMS capabilities: StandBy Suspend Off
173
[   641.914] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
174
[   641.914] (II) intel(0): First detailed timing is preferred mode
175
[   641.914] (II) intel(0): redX: 0.569 redY: 0.342   greenX: 0.312 greenY: 0.544
176
[   641.914] (II) intel(0): blueX: 0.149 blueY: 0.132   whiteX: 0.313 whiteY: 0.329
177
[   641.914] (II) intel(0): Supported established timings:
178
[   641.914] (II) intel(0): 640x480@60Hz
179
[   641.914] (II) intel(0): 800x600@60Hz
180
[   641.914] (II) intel(0): 1024x768@60Hz
181
[   641.914] (II) intel(0): Manufacturer's mask: 0
182
[   641.914] (II) intel(0): Supported detailed timing:
183
[   641.914] (II) intel(0): clock: 54.2 MHz   Image Size:  246 x 185 mm
184
[   641.914] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
185
[   641.914] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
186
[   641.914] (II) intel(0): Supported detailed timing:
187
[   641.914] (II) intel(0): clock: 43.3 MHz   Image Size:  246 x 185 mm
188
[   641.914] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
189
[   641.914] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
190
[   641.914] (II) intel(0): Unknown vendor-specific block f
191
[   641.914] (II) intel(0):  LTN121XJ-L07
192
[   641.914] (II) intel(0): EDID (in hex):
193
[   641.914] (II) intel(0): 	00ffffffffffff0030ae004000000000
194
[   641.914] (II) intel(0): 	000f010380191278eaed7591574f8b26
195
[   641.914] (II) intel(0): 	21505421080001010101010101010101
196
[   641.914] (II) intel(0): 	01010101010128150040410026301888
197
[   641.914] (II) intel(0): 	3600f6b900000018ed10004041002630
198
[   641.914] (II) intel(0): 	18883600f6b9000000180000000f0061
199
[   641.914] (II) intel(0): 	43326143280f01004ca3584a000000fe
200
[   641.914] (II) intel(0): 	004c544e313231584a2d4c30370a0000
201
[   641.914] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
202
[   641.915] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
203
[   641.915] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
204
[   641.915] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
205
[   641.915] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
206
[   641.915] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
207
[   641.915] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
208
[   641.915] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
209
[   641.915] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
210
[   641.915] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
211
[   641.915] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
212
[   641.915] (II) intel(0): Printing probed modes for output LVDS1
213
[   641.915] (II) intel(0): Modeline "1024x768"x50.0   54.16  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (40.3 kHz eP)
214
[   641.915] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
215
[   641.915] (II) intel(0): Modeline "1024x768"x40.0   43.33  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (32.2 kHz e)
216
[   641.915] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
217
[   641.915] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
218
[   641.915] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
219
[   641.915] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
220
[   641.968] (II) intel(0): EDID for output VGA1
221
[   641.968] (II) intel(0): EDID for output VIRTUAL1
222
[   641.968] (II) intel(0): Output LVDS1 connected
223
[   641.968] (II) intel(0): Output VGA1 disconnected
224
[   641.968] (II) intel(0): Output VIRTUAL1 disconnected
225
[   641.968] (II) intel(0): Using exact sizes for initial modes
226
[   641.968] (II) intel(0): Output LVDS1 using initial mode 1024x768
227
[   641.968] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
228
[   641.968] (==) intel(0): TearFree disabled
229
[   641.968] (==) intel(0): DPI set to (96, 96)
230
[   641.968] (II) Loading sub module "dri2"
231
[   641.968] (II) LoadModule: "dri2"
232
[   641.968] (II) Module "dri2" already built-in
233
[   641.968] (II) UnloadModule: "vesa"
234
[   641.968] (II) Unloading vesa
235
[   641.968] (==) Depth 24 pixmap format is 32 bpp
236
[   641.969] (II) intel(0): SNA initialized with Broadwater (gen4) backend
237
[   641.969] (==) intel(0): Backing store disabled
238
[   641.969] (==) intel(0): Silken mouse enabled
239
[   641.969] (II) intel(0): HW Cursor enabled
240
[   641.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
241
[   641.969] (==) intel(0): DPMS enabled
242
[   641.969] (II) intel(0): [XvMC] i965_xvmc driver initialized.
243
[   641.969] (II) intel(0): [DRI2] Setup complete
244
[   641.969] (II) intel(0): [DRI2]   DRI driver: i965
245
[   641.970] (II) intel(0): [DRI2]   VDPAU driver: i965
246
[   641.970] (II) intel(0): direct rendering: DRI2 enabled
247
[   641.970] (--) RandR disabled
248
[   642.045] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
249
[   642.045] (II) AIGLX: enabled GLX_INTEL_swap_event
250
[   642.045] (II) AIGLX: enabled GLX_ARB_create_context
251
[   642.045] (II) AIGLX: enabled GLX_ARB_create_context_profile
252
[   642.045] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
253
[   642.045] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
254
[   642.045] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
255
[   642.046] (II) AIGLX: Loaded and initialized i965
256
[   642.046] (II) GLX: Initialized DRI2 GL provider for screen 0
257
[   642.050] (II) intel(0): switch to mode 1024x768@50.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
258
[   642.551] (II) intel(0): Setting screen physical size to 270 x 203
259
[   642.726] (II) config/devd: probing input devices...
260
[   642.726] (II) config/devd: adding input device (null) (/dev/kbdmux)
261
[   642.726] (II) LoadModule: "kbd"
262
[   642.727] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
263
[   642.727] (II) Module kbd: vendor="X.Org Foundation"
264
[   642.727] 	compiled for 1.14.7, module version = 1.8.0
265
[   642.727] 	Module class: X.Org XInput Driver
266
[   642.727] 	ABI class: X.Org XInput driver, version 19.1
267
[   642.727] (II) Using input driver 'kbd' for 'kbdmux'
268
[   642.727] (**) kbdmux: always reports core events
269
[   642.727] (**) kbdmux: always reports core events
270
[   642.727] (**) Option "Protocol" "standard"
271
[   642.727] (**) Option "XkbRules" "base"
272
[   642.727] (**) Option "XkbModel" "pc105"
273
[   642.727] (**) Option "XkbLayout" "us"
274
[   642.727] (**) Option "config_info" "devd:kbdmux"
275
[   642.727] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
276
[   642.733] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
277
[   642.733] (II) config/devd: adding input device (null) (/dev/sysmouse)
278
[   642.733] (II) LoadModule: "mouse"
279
[   642.734] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
280
[   642.734] (II) Module mouse: vendor="X.Org Foundation"
281
[   642.734] 	compiled for 1.14.7, module version = 1.9.1
282
[   642.734] 	Module class: X.Org XInput Driver
283
[   642.734] 	ABI class: X.Org XInput driver, version 19.1
284
[   642.734] (II) Using input driver 'mouse' for 'sysmouse'
285
[   642.734] (**) sysmouse: always reports core events
286
[   642.734] (**) Option "Device" "/dev/sysmouse"
287
[   642.734] (==) sysmouse: Protocol: "Auto"
288
[   642.734] (**) sysmouse: always reports core events
289
[   642.734] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
290
[   642.734] (**) sysmouse: ZAxisMapping: buttons 4 and 5
291
[   642.734] (**) sysmouse: Buttons: 5
292
[   642.734] (**) Option "config_info" "devd:sysmouse"
293
[   642.734] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
294
[   642.734] (**) sysmouse: (accel) keeping acceleration scheme 1
295
[   642.734] (**) sysmouse: (accel) acceleration profile 0
296
[   642.734] (**) sysmouse: (accel) acceleration factor: 2.000
297
[   642.734] (**) sysmouse: (accel) acceleration threshold: 4
298
[   642.734] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
299
[   642.734] (II) sysmouse: SetupAuto: protocol is SysMouse
300
[   642.734] (II) config/devd: adding input device 0x04b3 product 0x3107 (/dev/ums0)
301
[   642.735] (II) Using input driver 'mouse' for '0x04b3 product 0x3107'
302
[   642.735] (**) 0x04b3 product 0x3107: always reports core events
303
[   642.735] (**) Option "Device" "/dev/ums0"
304
[   642.735] (==) 0x04b3 product 0x3107: Protocol: "Auto"
305
[   642.735] (**) 0x04b3 product 0x3107: always reports core events
306
[   642.735] (==) 0x04b3 product 0x3107: Emulate3Buttons, Emulate3Timeout: 50
307
[   642.735] (**) 0x04b3 product 0x3107: ZAxisMapping: buttons 4 and 5
308
[   642.735] (**) 0x04b3 product 0x3107: Buttons: 5
309
[   642.735] (**) Option "config_info" "devd:ums0"
310
[   642.735] (II) XINPUT: Adding extended input device "0x04b3 product 0x3107" (type: MOUSE, id 8)
311
[   642.735] (**) 0x04b3 product 0x3107: (accel) keeping acceleration scheme 1
312
[   642.735] (**) 0x04b3 product 0x3107: (accel) acceleration profile 0
313
[   642.735] (**) 0x04b3 product 0x3107: (accel) acceleration factor: 2.000
314
[   642.735] (**) 0x04b3 product 0x3107: (accel) acceleration threshold: 4
315
[   642.735] (II) 0x04b3 product 0x3107: SetupAuto: hw.iftype is 5, hw.model is 0
316
[   642.735] (II) 0x04b3 product 0x3107: SetupAuto: protocol is SysMouse
317
[   642.735] (WW) fcntl(12, F_SETOWN): Inappropriate ioctl for device
318
[   642.735] (II) config/devd: device /dev/psm0 already opened
319
[   662.980] (II) AIGLX: Suspending AIGLX clients for VT switch
320
[   663.290] (WW) intel(0): drmDropMaster failed: Unknown error: -22
321
[   664.545] (II) AIGLX: Resuming AIGLX clients after VT switch
322
[   664.545] (II) intel(0): switch to mode 1024x768@50.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
323
[   664.620] (**) Option "BaudRate" "1200"
324
[   664.620] (**) Option "StopBits" "2"
325
[   664.620] (**) Option "DataBits" "8"
326
[   664.620] (**) Option "Parity" "None"
327
[   664.620] (**) Option "Vmin" "1"
328
[   664.620] (**) Option "Vtime" "0"
329
[   664.620] (**) Option "FlowControl" "None"
330
[   664.620] (WW) fcntl(12, F_SETOWN): Inappropriate ioctl for device
331
[   672.224] (II) AIGLX: Suspending AIGLX clients for VT switch
332
[   672.525] (WW) intel(0): drmDropMaster failed: Unknown error: -22
333
[   673.633] (II) config/devd: terminating backend...
334
[   673.633] (II) UnloadModule: "mouse"
335
[   673.633] (II) UnloadModule: "mouse"
336
[   673.633] (II) UnloadModule: "kbd"
337
[   673.651] (EE) Server terminated successfully (0). Closing log file.
    (1-1/1)