Bug #1667
closed
disklabel / disklabel64 change needs reboot / disk change
Added by thomas.nikolajsen over 14 years ago.
Updated over 12 years ago.
Description
Changing disk label from disklabel to disklabel64 format
or vice versa needs reboot (or disk change, eg natacontrol detach / attach).
This has worked without reboot earlier,
as described in disklabel(8) & disklabel64(8);
problem was introduced with devfs as I remeber.
Problem seems to be that in kernel disklabel survives
erasure of label on device (disklabel -W .. / dd if=/dev/zero of=DISK ..)
-thomas
:Changing disk label from disklabel to disklabel64 format
:or vice versa needs reboot (or disk change, eg natacontrol detach / attach).
:
:This has worked without reboot earlier,
:as described in disklabel(8) & disklabel64(8);
:problem was introduced with devfs as I remeber.
:
:Problem seems to be that in kernel disklabel survives
:erasure of label on device (disklabel -W .. / dd if=/dev/zero of=DISK ..)
:
: -thomas
Devfs is supposed to flag writes to the dos slice and/or label area
and re-probe. There's probably some logic missing.
-Matt
To fix this, please add the following lines in "case DIOCWLABEL:"
(sys/kern/subr_diskslice.c)
disk_msg_send_sync(DISK_SLICE_REPROBE, dev->si_disk, sp);
devfs_config();
just after line 648:
set_ds_wlabel(ssp, slice, *(int *)data != 0);
I can't do it right now, but I'll be back to work on this and more on the
weekend.
This should solve the disklabel issue at least. Direct writes (e.g. dd) should
be detected properly with the DSF_REPROBE magic. If not, please post some more
info on the disk/slice structure.
Cheers,
Alex Hornung
Patch supplied in prev. message didn't solve problem:
after applying patch disk slice is read-only after 'disklabel -W <slice>',
so dd fails (trying to zero initial part of slice).
Details on disk/slice:
fdisk -i ad4 # install MBR
disklabel64 -rw ad4s2 auto # initially (slice empty) succeeds
disklabel64 -W ad4s2
dd if=/dev/zero of=/dev/ad4s2 bs=512 count=32 # succeedes on master; fails w/
patch (issue1667 Feb. 9th 2010) (read-only)
disklabel32 -rw ad4s2 auto # fails 'disk already has a label of a different
type'
disklabel64 ad4s2 # shows 64-bit label
-thomas
- Status changed from New to Closed
Fixed in 523f068048e2f8f3caaaf6c86c8073dd233c0f62
Also available in: Atom
PDF